Hello
I have a simple question, now i am on JVU (ODEX) with value pack, semaphore 2.5.0, ext4 and some various mods. What is the flashing procedure...copy to sdcard than wipe cache, dalvic cache, factory reset...than install from sdcad??? Please give me som instructions. I'm new in subject. I LOVE your ROM, and i think it's PERFECT!!!
Hi,first make a backup, download the zip.
Copy the zip file in the internal SD (SD internal phone, not the removable SD card).
Restart the phone in recovery mode CWM.
disable ext4
Select "install from sdcard zip."
Select "choose zip sdcard".
Locate and select the downloaded zip file.
Then restart the phone.
Ok. But can i flash it with my ROM??? It is not an issue??? Thx for quick respond There will be no problem that i am on ODEX??
No, no problem
but do not forget to do the backup
if you did not Titanium Backup installs to save your apps (before flashing)
take the version no wipe
If this is your first flash ... take a maximum of precautions
THX. And that is not my first flash. But first on rom without ODIN.(CMW)
With pleasure, good flash
Related
I tried to flash doc's V8 ROM but after all the wipes when i choosed "Instal zip from sd card" I got the error that no file found, and when I tried to reboot the recovery he said can't mount sdCard ... what should I do???
please I searched and did'nt know what to do ....
Can you get into download mode? If so you would be best to install a stock samsung firmware using odin , then root and start again.
Did that, again after flashed stock and wipe before installing the rom when I tried to choose zip from sd card, the same thing happend... "no files found"... what should I do??
have you copied the file to your internal sdcard?
To the Sdcard... after flashing stock rom and putting semaphore kernel I have the ability to install zip from sdcard , but if I wanna change the rom I should wipe the factory + cache + dalvik + format system... after I do the factory wipe, I can't Install anything from sd card, I get the error that no files found... what to do?
Tried something..
I tried just install zip from sd card over the stock 2.3.6 , I installed the Doc's Rom , and it works, but I didn't wiped anything... Is it ok?
Should I act diffrently ???
If it`s all working i would just leave it as is...it is good to wipe but not always needed . check that your cwm is the latest version or reflash another version through the app to see if that resolves your zip files not showing up .
I can install now zip from SDCARD but I think that If I would do a full wipe I won't be able to do that..
my mobile got struck on flashing rom
please help..
i had flash to GB roooted rom provided by dr.ketan using pc odin..and then full wipe..
then i switched to revovery mode in mobile..
installed speedmod kernel..
reboot recovery..
wipe all 3(cache, data, dalvik)
then selected crash rom zip file to install from zip card..
process started by strucked in between
its showing crash rom flash kernel
crash rom flash modem
problem resolved...
maby you can tell us how you fixed this just in case someone else bumps into the same kind of problems you did.
So, we cause a triple murder before breakfast, start a race war before dinner - that's uh, that's a pretty good day.
i was having abyss kernel zip file and rocket rom v1 zip file in internal usb storage of mobile..
1)removed battery and reinsert the battery and then boot in recovery mode
2) select the option "install .zip from sd card"
3) selected abyss zip file and flashed
4} then reboot recovery and then wipe data, cache and dalvik(in advanced mode)..all three
5) again selected "install .zip from sdcard" option and selected rocketrom v11 zip file..
after complete flashing, mobile reboot and finally i was having rocket rom in my cellphone..
if u r not having files in your sdcard..u can copy those files in a micro sd card and just insert card into mobile and follow the steps..
hope its helpful..
Right, ive rooted my note, and im looking for an iPhone type Miui theme rom, ive looked at how to install the new rom and i have no idea what to do, it says that i cant flash on stock ICS ROM, currently running 4.0.1 atm, and it also says something about Aroma Installer. i am a big newb when it comes to this, i dont wanna f**k my phone up so can someone help me and tell me what to do please?
Firstly remove the stock kernel, thats what it is referring to, So flash something safe like Philz or Hydracore.
And also, Aroma installer is something that will appear when flashing via CWM, it is a neat feature which allows you to pick and choose optional extras to install, or to remove certain things from installing.
Once it appears just follow the instructions, its simple really.
when i rooted it i changed to franko kernel? what do i need to flash Miui ROM Vengeance Note v2_4-08 09 2012? im downloading that atm
Go with something popular like philz or hydracore, it will be overwritten once the ROM installs anyway.
Make sure to do the wipes (if necessary)
so i install that kernel, then flash the rom using cwm and it says to do a wipe, how do i wipe it?
In recovery there are several options, you will need to wipe data / Factory reset, then wipe cache, then go to advanced and wipe dalvik cache.
You may also need to format /system and /preload, you will find these under the mounts and storage menu
Sent from my GT-N7000 using xda premium
i still have no idea what to do.. all i know is when doing a new rom install in from sd card is all i know, i need an easy to understand explaination lol because what you're saying is just letters to me, if you can tell me how to do it because i dont know what im doing..
Okay, so you're completely stock now right? If so, head over to original android development section and download either philz kernel for your version (find this in settings > about phone) or hydracore kernel (this needs to be flashed with odin unless you are already rooted with Cwm recovery, if not just use philz)
Once downloaded place on your internal sd card, power the phone off, hold volume up + home + power all at once until you enter recovery.
Now select apply update from sd card or update . zip (can't remember which one) once flashed do the same procedure again, this time you will notice how different it is.
Now either mount usb storage in recovery (under mounts and storage) or reboot the phone to use mtp / mass storage.
Place MIUI rom in your internal sd card, reboot into recovery, select wipe data / Factory reset (will remove all apps and data, not media, so backup what's important before hand)
Now select wipe cache, then go to advanced and select wipe dalvik cache.
Now go to install zip from sd card, then choose zip from internal sd card, find the MIUI rom and flash it.
Once done, reboot and wait upto 10mins for it to boot properly.
Double check to MIUI thread for install instructions as you may need to format system and preload too when performing the full wipe in recovery.
Sent from my GT-N7000 using xda premium
oh my word...you typed all this from your phone? hoped you were using a bluetooth keyboard...
good luck paul on your install
thanks azz for typing this up..definitely bookmark worthy.
azzledazzle said:
Okay, so you're completely stock now right? If so, head over to original android development section and download either philz kernel for your version (find this in settings > about phone) or hydracore kernel (this needs to be flashed with odin unless you are already rooted with Cwm recovery, if not just use philz)
Once downloaded place on your internal sd card, power the phone off, hold volume up + home + power all at once until you enter recovery.
Now select apply update from sd card or update . zip (can't remember which one) once flashed do the same procedure again, this time you will notice how different it is.
Now either mount usb storage in recovery (under mounts and storage) or reboot the phone to use mtp / mass storage.
Place MIUI rom in your internal sd card, reboot into recovery, select wipe data / Factory reset (will remove all apps and data, not media, so backup what's important before hand)
Now select wipe cache, then go to advanced and select wipe dalvik cache.
Now go to install zip from sd card, then choose zip from internal sd card, find the MIUI rom and flash it.
Once done, reboot and wait upto 10mins for it to boot properly.
Double check to MIUI thread for install instructions as you may need to format system and preload too when performing the full wipe in recovery.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hey guys, first of all, just let me say, thanks for reading.
Here is the thing, I got my note a while back and rooted and installed CM 10 at the time, then I just kept using its update feature to keep up to date. I did that almost a year ago and never came back to XDA Devs. So im pretty rusty on procedures and that kind of stuff.
I was looking into installing a new ROM, one that has the S-Note, S-Memo and S-Pen drawing apps, and If I'm not mistaken, this one does:
http://forum.xda-developers.com/showthread.php?t=1970626
I know how to install a new ROM, but when I reboot my phone I cant access CWM recovery to install from SD card.
So my question is: What would I need to do, to get back CWM so I can install the previously mentioned ROM, if I'm running the latest nightly of CM?
Thank you in advance for your time!
Sounds like you need to do a full wipe and flash a ROM with a kernel that has cwm. Via a computer
You can flash the hydracore kernel via PC ODIN or mobile ODIN should also work. Better do a full wipe and flash with PC ODIN.
Thanks guys!
Would asking for a link to the relevant and recommended tutorials be too much?
Help Installing New ROM
Hey guys, first of all, just let me say, thanks for reading.
I am a noob wanting to install custom rom my Galaxy Note N 7000
Android version : 4.0.4
Baseband version : N7000XXLRK
Kernal version : 3.0.15 - N7000XXLRK-CL811902
I was earlier planning to factory reset my Note and then install the latest firmware by Samsung from Kies
So I hard reset my Galaxy Note.
But I had some trouble downloading the update using Kies, that's when I decided to install custom ROM.
So the following are the details I have collected over my research on how to install Custom ROM on my Galaxy Note.
I am posting this thread because I want to check, if I have gathered the right information over my search
Please reply with the steps I have to remove or steps I have to add.
1. Have to root my phone and install a Safe Kernel.
Charge the battery to 100%
Then put my Phone in Debugging Mode
I have checked this thread [Beginners Guide]How to root Samsung Galaxy Note for rooting details and found 3 links for my kernel on the thread
[03.06.2013][PhilZ-cwm6][n7000] v5.06.1 Safe Stock Kernel+CWM6+Root+exFAT+ext4-LT6
http://d-h.st/SZ2 - Filename: PhilZ-cwm6-XXLRK-XEU-3.1
http://d-h.st/NFY - Filename: PhilZ-cwm6-XXLRK-XEU-2.7
http://d-h.st/b5M - Filename: PhilZ-cwm6-XXLRK-XEU-2.5
I guess PhilZ-cwm6-XXLRK-XEU-3.1 is the latest kernel for my phone from the version details.
Please confirm if I was right in choosing the kernel.
- Copy downloaded file to Ext SD card to root directory
- Reboot into recovery (vol up+Home+power)
- Select install(update) zip from ext SD card
- Select PhilZ-cwm6-XXLRK-XEU-3.1-signed.zip' which I copied to Ext card
- Reboot device
Questions???
---> Does root directory mean I have to copy the files to external SD card when its just open?
---> How can I check if my phone is successfully rooted?
2. Backup my Phone’s IMEI
-Install Root Browser from google store
-Copy efs folder to external SD Card storage and then to my computer
3. Backup the Complete ROM
- Reboot into recovery (vol up+Home+power)
- Scroll down to the “backup and restore” option and backup the ROM to external storage using the option “backup to external sdcard” option.
Question???
---> Can I save this backup to my computer so that I can delete the back up and save space on the external SD?
4. Installing Custom ROM
I am planning to install [AOSPA 4.2.2] PARANOIDANDROID 3.60 (June 11)
- Download the latest ROM pa_n7000-3.60-11JUN2013-053741.zip using the link
- Download the latest Gapps pa_gapps-full-4.2-20130615-signed.zip from the link
- Copy ROM and Gapps to Internal SD card
- Reboot into recovery (vol up+Home+power)
- Select "wipe data/factory reset"
- Select "wipe cache partition"
- Go to advanced and select “wipe dalvik cache” and “wipe battery stats”
- Go to mounts and storage and ”format system”
- Return back to the main menu and select “install zip" and choose zip from Internal sd card” and select the ROM
- Return back to the main menu and select “install zip" and choose zip from Internal sd card” and select the Gapps
- Select "wipe cache partition"
- Go to advanced and select “wipe dalvik cache”
- Finally, go back to the main menu in Recovery and select ”reboot system now”.
Questions???
---> Doesn't wiping all the data remove the ROM and Gapps we have copied to the Internal SD card?
---> Is it really the Internal SD card where I have to copy ROM and Gapps?
---> Do I really have to wipe cache after installing ROM and Gapps?
---> After I successfully install the custom ROM how will I receive the future updates?
Thanks in advance :laugh:
Hey mate, lotta questions you got there!
Firstly, you copy the PhilZ kernel .zip to your SD card and then go to recovery and flash it. You go to recovery, you'll have an option, flash .zip from SD card.
To check the root, you'll have superuser in your app drawer after you restart.
The backup you're talking about here is the nandroid backup, yes you can copy the folder to the PC later.
And when you wipe data, you don't lose your documents on the internal SD, the ROM and gapps will be still there, and you can copy the ROM and gapps .zip files to SD card too.
Yes wiping cache before flashing tje ROM is advisable. And once you root the phone, you won't get access to future updates by samsung officially, but you'll have the stock based custom ROMs on xda which solves that problem, else you can flash the official firmware anytime and update.
Hit thanks if this helped, guess it did
Hi, i recentry rooted my samsung s3 mini for installing the new kitkat rom.
So, i followed the steps, saved the new ROM on my external sd card and formated the system.
The problem is this: when i was browsing the zip file with the ROM on the costume recovery menu (I have ClockworkMod Recovery v6.0.2.7), a message appears saying "no files found".
So now I can´t reebot my phone beacause it has no OS and I don't know how to fix this. Can anyone help me?
Thanks
Vitorsousa_20 said:
Hi, i recentry rooted my samsung s3 mini for installing the new kitkat rom.
So, i followed the steps, saved the new ROM on my external sd card and formated the system.
The problem is this: when i was browsing the zip file with the ROM on the costume recovery menu (I have ClockworkMod Recovery v6.0.2.7), a message appears saying "no files found".
So now I can´t reebot my phone beacause it has no OS and I don't know how to fix this. Can anyone help me?
Thanks
Click to expand...
Click to collapse
Never, ever format the system.
If you're on stock just do that:
1-Reboot in recovery
2-Choose Wipe data/factory reset
3-Flash cm rom
4-Flash gapps
5-Reboot
Done, that's it.
If you want to update cm roms (or any rom):
1-Reboot in recovery
2-Flash cm update
3-Choose Wipe cache & dalvik cache
4-Reboot
Done.
You don't need to mess up with anything more.
P.S. better use twrp 2.7 from novafusion, for better compatibility.
mauam said:
Never, ever format the system.
If you're on stock just do that:
1-Reboot in recovery
2-Choose Wipe data/factory reset
3-Flash cm rom
4-Flash gapps
5-Reboot
Done, that's it.
If you want to update cm roms (or any rom):
1-Reboot in recovery
2-Flash cm update
3-Choose Wipe cache & dalvik cache
4-Reboot
Done.
You don't need to mess up with anything more.
P.S. better use twrp 2.7 from novafusion, for better compatibility.
Click to expand...
Click to collapse
Thanks but it still doesn't work. I want to flash the rom but the rom file its in the external sd card and it says that there are no files found. And when i hook up the phone to my pc the phone is detected, however I can´t acess the sd card.
Maybe if there's a way for me to acess the ext. sd card and change the rom file for the internal memory it would work. Do you know how can i do this?
Vitorsousa_20 said:
Thanks but it still doesn't work. I want to flash the rom but the rom file its in the external sd card and it says that there are no files found. And when i hook up the phone to my pc the phone is detected, however I can´t access the sd card.
Maybe if there's a way for me to acess the ext. sd card and change the rom file for the internal memory it would work. Do you know how can i do this?
Click to expand...
Click to collapse
Euhm, it might be a weird idea, but you take your external SD-card, put it in your card reader, connect the card reader to your pc, and copy the zip to (let's say) the root of the SD-card
CWM should be fine, but I'm used to TWRP. You can find it on the novafusion website. (search novafusion TWRP)
If you can't boot into CWM or TWRP, or files still don't show up on the browsermodule in the recovery rom, you still have the possibility to flash your ROM using odin. Check the installation guide on novafusion, it gives you a link to all the files you need and a detailed description how to install your rom.