Related
How can I unroot my OB? rooted my OB but SU and Busybox was not installed,then tried to unroot but failed to unroot,pls. help this is my first android phone,thanks,
reflash with stock rom using smartflashtools method without root OB , then update with official lg updatetools
=> http://forum.xda-developers.com/showthread.php?t=1448803
or try SuperOneClick => http://forum.xda-developers.com/showthread.php?t=803682
I tried flashing w/ SFT,and I got a message that says"Smart Flash Tool has stopped working properly",and when i tried SuperOneClick,it started unrooting but got stuck on chngmod,is there any other way to unroot my OB,tnx for sparing your time on me,,
the last chance => http://forum.xda-developers.com/showthread.php?t=1512203&highlight=inject+cwm
if you can't with that too, retry the smartflashtool
it should work, redownload and run it as administrator and also run windowsenabler
if it doesnt works at all, use another computer
First of all Download V20b Official unrooted firmware from here;
http://forum.xda-developers.com/showthread.php?t=1471897&highlight=v20b
You should have LG drivers if not then link is there in above thread..
I will Tell you Step by step Start for Smartflash,
1) Download Working smartflash from here,
http://www.mediafire.com/?wby32568b60w1k5
2) Turn off the antivirus program if running.
IMP DISABLE LG Virtual Modem from Control Panel> Device Manager> Modems> (Image is attached Bellow)
3)Extract downloaded smartflash.
4)Open Extracted Smartflash folder,
Go to WINDOWS ENABLER, right click on it RUN AS ADMINISTRATOR.
The WINDOWS ENABLER icon will appear Near Clock and volume control as shown in bellow image click on it to SET it ON.
5) Now right click on B_SmartFlashTool_Extern.exe file in Smartflash folder and RUN AS ADMINISTRATOR.
6)*Extract V20B rar file - you will get two bin files CP and AP.
*Extarct the smartflash rar file
*Run smartflash tool.
*Select- ROM copy D/L
*Connect OB (P970) in software upgrade mode (Keep pressing Vol+(up) and connect to USB)
*com port automatic get selected. ( If drivers are installed correctly)
*Select CP bin
*Select AP bin
*Hit Start
tried to follow your step by step guide,but after "Trying to communicate with IFX modem" got stuck to "Timeout error is occured",what should I do now?is there something I did wrong??
joeflcab said:
tried to follow your step by step guide,but after "Trying to communicate with IFX modem" got stuck to "Timeout error is occured",what should I do now?is there something I did wrong??
Click to expand...
Click to collapse
you are doing something wrong.. just try on any other computer with fresh installation of lg drivers.. on my Windows 7 it works perfect.
wait and dont forget to disable lg modem ok?
GUYS!!!!I would like to thank you all individually,since I am new in our helpfull site and with my troubling eyes,I could not find the thanks button that 's why I am expressing my gratitude to all of you for helping me these way,my OB now is on it's stock ROM ,bcoz of your help,tnx again ,God Bless You Al.l
Lol...dont worry dude
We are here to help
We too needed help when we forst started and still do sometimes
Sent from my LG-P970 using Tapatalk
hello
i have bricked my lg p880 but i cant get it out.
I have tried everything.
Can somebody please help me?
Thanks
Im really desperate
tell more
need more info
whats phone situation
judodave said:
hello
i have bricked my lg p880 but i cant get it out.
I have tried everything.
Can somebody please help me?
Thanks
Im really desperate
Click to expand...
Click to collapse
OK, lets do it...
First you'll need the .kdz file. The firmware to flash it. Click here: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10F_00/V10F_00.kdz
Next, the programs, here: http://www.4shared.com/rar/Re4VCOAS/kdz-update.html
Assuming that you already have the LG drivers installed...
1 >>>>> copy the V10F_00.kdz to the folder that you download (kdz-update).
2 >>>>> install "msxml" from the "kdz-update" folder.
3 >>>>> run "Windows Enabler" from the "kdz-update" folder, it should appear an icon on the right/bottom of your screen, if not near the others in the taskbar, you need to click on it and you should see "ON" on that icon.
4 >>>>> run "UpTestEX_mod2_marwin" from the "kdz-update" folder.
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
On the field "Version" (at the left) type "V10F_00".
On the field "Select model .dll" browse and select the "P880.dll" from the "kdz-update" folder.
On the field "PhoneMode" select "EMERGENCY".
On the field "Select kdz file" browse and choose the "V10F_00.kdz" that you download and should be in the "kdz-update" folder.
5 >>>>> with your phone "OFF" and the USB cable connected to the PC, press "VOL-" and connect the cable to the phone untill it turns "ON" in "S/W Upgrade".
6 >>>>> Now click on "Start Upgrade" in "UpTestEX_mod2_marwin". As soon as you see some progress in the log, put the battery on the phone, carefull to don't let it drop.
Wait until the phone reboot by it self and it should be all.
Let us know if it worked or not and, or, if you have any other problems.
Good luck!
RuedasLocas said:
OK, lets do it...
First you'll need the .kdz file. The firmware to flash it. Click here: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10F_00/V10F_00.kdz
Next, the programs, here: http://www.4shared.com/rar/Re4VCOAS/kdz-update.html
Assuming that you already have the LG drivers installed...
1 >>>>> copy the V10F_00.kdz to the folder that you download (kdz-update).
2 >>>>> install "msxml" from the "kdz-update" folder.
3 >>>>> run "Windows Enabler" from the "kdz-update" folder, it should appear an icon on the right/bottom of your screen, if not near the others in the taskbar, you need to click on it and you should see "ON" on that icon.
4 >>>>> run "UpTestEX_mod2_marwin" from the "kdz-update" folder.
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
On the field "Version" (at the left) type "V10F_00".
On the field "Select model .dll" browse and select the "P880.dll" from the "kdz-update" folder.
On the field "PhoneMode" select "EMERGENCY".
On the field "Select kdz file" browse and choose the "V10F_00.kdz" that you download and should be in the "kdz-update" folder.
5 >>>>> with your phone "OFF" and the USB cable connected to the PC, press "VOL-" and connect the cable to the phone untill it turns "ON" in "S/W Upgrade".
6 >>>>> Now click on "Start Upgrade" in "UpTestEX_mod2_marwin". As soon as you see some progress in the log, put the battery on the phone, carefull to don't let it drop.
Wait until the phone reboot by it self and it should be all.
Let us know if it worked or not and, or, if you have any other problems.
Good luck!
Click to expand...
Click to collapse
The phone boots up but stucks at the lg logo. With 'select type: CMDA (smartphone wm) the log stops at '13:41:32 : 3GQCT : wParam = 2001, lParam = 0'. It never says complete. And with 'Select type: 3GQCT (smartphone wm) it gives an unpacking error.
Its very anoying.
judodave said:
The phone boots up but stucks at the lg logo. With 'select type: CMDA (smartphone wm) the log stops at '13:41:32 : 3GQCT : wParam = 2001, lParam = 0'. It never says complete. And with 'Select type: 3GQCT (smartphone wm) it gives an unpacking error.
Its very anoying.
Click to expand...
Click to collapse
Forgot to tell you, everytime you need to use the flash tool you need to close it and restart it again.
That unpacking error is because of temp. files. The program unpack the kdz file to another one where is the .dll and the .dz, doing that twice it uses to have that error.
What RuedasLocas said is correct however this:
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
Isn't. Keep the phone type set to 3GQCT.
XperiaPlayer said:
What RuedasLocas said is correct however this:
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
Isn't. Keep the phone type set to 3GQCT.
Click to expand...
Click to collapse
thanks but it didn't work. Still stuck on lg logo without boot animation :'(
judodave said:
thanks but it didn't work. Still stuck on lg logo without boot animation :'(
Click to expand...
Click to collapse
@judodave, try first flash the V10A version.
My first flash went wrong and I was going crazy around the V10C and only after I flash with the V10A I was able to re-flash with the V10F.
Maybe it works with you to... at least I hope so.
Here is the link: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10A_00/V10A_00.kdz
I'll flash mine (later of course) just to post a damn video of how I do it.
Good luck once more.
RuedasLocas said:
@judodave, try first flash the V10A version.
My first flash went wrong and I was going crazy around the V10C and only after I flash with the V10A I was able to re-flash with the V10F.
Maybe it works with you to... at least I hope so.
Here is the link: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10A_00/V10A_00.kdz
I'll flash mine (later of course) just to post a damn video of how I do it.
Good luck once more.
Click to expand...
Click to collapse
thanks but didn't work either/ i shall try V10C_00 as of it came out off the box with V10C i beleive. Wish me luck :good:
(edit: I meant V10D sorry. But i will try V10B too.)
judodave said:
thanks but didn't work either/ i shall try V10C_00 as of it came out off the box with V10C i beleive. Wish me luck :good:
(edit: I meant V10D sorry. But i will try V10B too.)
Click to expand...
Click to collapse
nothing works. It wont unbrick
judodave said:
nothing works. It wont unbrick
Click to expand...
Click to collapse
You'll do it. From time to time someone appears with a phone like yours. For sure is something escaping and we just don't figure out what it is.
When we start to do the same thing over and over again, we use to forgot some small procedures.
Don't worry, one of these days you'll make it.
RuedasLocas said:
You'll do it. From time to time someone appears with a phone like yours. For sure is something escaping and we just don't figure out what it is.
When we start to do the same thing over and over again, we use to forgot some small procedures.
Don't worry, one of these days you'll make it.
Click to expand...
Click to collapse
Thanks for your help. I think I am going to send the phone to lg and hope for the best. I need the phone now. So waiting is no option. Agian thanks for your help.
unbrick booting problem stuck with lg screen
hello sir just yesterday i tried to downgrade my lg p880, and while the process i dont know what went wrong n it got stuck in lg screen, m a noob i tried all options mentioned here but i got no success, then i tried this it worked for me, i successfully got my phone working to stock without data loss,but u need lg pc suite, installed in ur pc u can get that from lg web site,
step 1:- keep ur phone off and connect ur phone by holding vol - key, it will show u software update
step 2:- then open lg pc suite
step 3:- click on device then select emergency firmware recovery
step 4:- u will come with notification u have to click ok
step 5:-then u will see lg mobile support tool there select ur country and install drivers
step 6:- then it will show ur phone connected but it may say ur phone as already updated software etc, but dont worry it will update it then leave it it will start downloading firmware and once its over phone will reboot normally, u got ur phone back, working
Thanks.. It works
riks4039 said:
hello sir just yesterday i tried to downgrade my lg p880, and while the process i dont know what went wrong n it got stuck in lg screen, m a noob i tried all options mentioned here but i got no success, then i tried this it worked for me, i successfully got my phone working to stock without data loss,but u need lg pc suite, installed in ur pc u can get that from lg web site,
step 1:- keep ur phone off and connect ur phone by holding vol - key, it will show u software update
step 2:- then open lg pc suite
step 3:- click on device then select emergency firmware recovery
step 4:- u will come with notification u have to click ok
step 5:-then u will see lg mobile support tool there select ur country and install drivers
step 6:- then it will show ur phone connected but it may say ur phone as already updated software etc, but dont worry it will update it then leave it it will start downloading firmware and once its over phone will reboot normally, u got ur phone back, working
Click to expand...
Click to collapse
Thanks.. it works. I just upgraded my lg p880 from v10e to v20a two days a go. Then i rooted the device. Works for two days, then it stuck at boot logo after I restarted the device. Do not know why. So far has been disappointed with the battery performance and the sound quality of this device. Hopefully the new v20a can help improve even just a bit:good:
riks4039 said:
hello sir just yesterday i tried to downgrade my lg p880, and while the process i dont know what went wrong n it got stuck in lg screen, m a noob i tried all options mentioned here but i got no success, then i tried this it worked for me, i successfully got my phone working to stock without data loss,but u need lg pc suite, installed in ur pc u can get that from lg web site,
step 1:- keep ur phone off and connect ur phone by holding vol - key, it will show u software update
step 2:- then open lg pc suite
step 3:- click on device then select emergency firmware recovery
step 4:- u will come with notification u have to click ok
step 5:-then u will see lg mobile support tool there select ur country and install drivers
step 6:- then it will show ur phone connected but it may say ur phone as already updated software etc, but dont worry it will update it then leave it it will start downloading firmware and once its over phone will reboot normally, u got ur phone back, working
Click to expand...
Click to collapse
Hello. For me it`s not working firmware recovery. Tried everything. Nothing was helped. Around 6 ours of playing with the device and nothing. And finally i made it. Restarted my Windows. Killed all background applications like Nokia pc suite, everything. And then worked like a charm.
someone please help me, i was actualizano my lg 4x through lg mobile support too, l gave me an error and now enceindo in any way or sw or anything just when I connect to pc recognize me as apx device. please help.
hello friend, I need urgent help to repair my lg optimus 4x, so i was updating with lg mobile support tool and gave me an error, now only the pc recognizes it as apx device, is the only sign of life it presents, not light does not come in sw or anything. i was reading as desbrickear optimus 2x, http://forum.xda-developers.com/show....php?t=1007825 but not if this tutorial works with optimus 4x, please help ...
hello friend, I need urgent help to repair my lg optimus 4x, so i was updating with lg mobile support tool and gave me an error, now only the pc recognizes it as apx device, is the only sign of life it presents, not light does not come in sw or anything. i was reading as desbrickear optimus 2x, http://forum.xda-developers.com/show....php?t=1007825 but not if this tutorial works with optimus 4x, please help ...
Thank You: This is a GEM to all P880 Newbies
This is a good deed for the effort you put this into such easy steps for beginners to understand..this should be sticky...thanks :good::good:
RuedasLocas said:
OK, lets do it...
First you'll need the .kdz file. The firmware to flash it. Click here: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880/ANLDWH/V10F_00/V10F_00.kdz
Next, the programs, here: http://www.4shared.com/rar/Re4VCOAS/kdz-update.html
Assuming that you already have the LG drivers installed...
1 >>>>> copy the V10F_00.kdz to the folder that you download (kdz-update).
2 >>>>> install "msxml" from the "kdz-update" folder.
3 >>>>> run "Windows Enabler" from the "kdz-update" folder, it should appear an icon on the right/bottom of your screen, if not near the others in the taskbar, you need to click on it and you should see "ON" on that icon.
4 >>>>> run "UpTestEX_mod2_marwin" from the "kdz-update" folder.
On the field "Select type" choose "CDMA - SmartPhone(WM)" (if the flash fails change it to "3GQCT - SmartPhone(WM)")
On the field "Version" (at the left) type "V10F_00".
On the field "Select model .dll" browse and select the "P880.dll" from the "kdz-update" folder.
On the field "PhoneMode" select "EMERGENCY".
On the field "Select kdz file" browse and choose the "V10F_00.kdz" that you download and should be in the "kdz-update" folder.
5 >>>>> with your phone "OFF" and the USB cable connected to the PC, press "VOL-" and connect the cable to the phone untill it turns "ON" in "S/W Upgrade".
6 >>>>> Now click on "Start Upgrade" in "UpTestEX_mod2_marwin". As soon as you see some progress in the log, put the battery on the phone, carefull to don't let it drop.
Wait until the phone reboot by it self and it should be all.
Let us know if it worked or not and, or, if you have any other problems.
Good luck!
Click to expand...
Click to collapse
i would say u install lg pc suite again on different pc and try mine procedure m sure it will work as ur drivers r missing thats reason ur not able to go ahead sorry for late reply
when i tried to update my LG Optimus 4x HD , the error comes " Your Device Is Not Registered Yet "... how to solve this problem ?
vishav420 said:
when i tried to update my LG Optimus 4x HD , the error comes " Your Device Is Not Registered Yet "... how to solve this problem ?
Click to expand...
Click to collapse
Update with kdz. You're using different version than the original right?
Sent from my LG-P880 using xda app-developers app
vishav420 said:
when i tried to update my LG Optimus 4x HD , the error comes " Your Device Is Not Registered Yet "... how to solve this problem ?
Click to expand...
Click to collapse
You updated the phone with a different KDZ from where you bought the phone, so you wont receive any OTA updates... nor Lg pC suite and lg mobil tool will give you the update you actually want.
I know this is an old thread but better to ask here than start a new thread... I'm getting the not registered yet error even though I flashed the correct 20B kdz for my phone by checking my IMEI. I mean I know I can just flash kdz's of future versions, I never actually use the OTA feature, but I'm still curious why I'm getting the error.
Two reasons for this error:
1. Different region software you flashed than yours phone
2. Phone is developer edition aka "not for sale", than you need to use .dz not .kdz
hpnxfox said:
Two reasons for this error:
1. Different region software you flashed than yours phone
2. Phone is developer edition aka "not for sale", than you need to use .dz, not .kdz
Click to expand...
Click to collapse
Neither of these are the case with my phone. As I said, I flashed the kdz specified in http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=MY_IMEI and it's not a developer edition.
AlderCass said:
Neither of these are the case with my phone. As I said, I flashed the kdz specified in http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=MY_IMEI and it's not a developer edition.
Click to expand...
Click to collapse
When you get this error message?
hpnxfox said:
When you get this error message?
Click to expand...
Click to collapse
Settings > About Phone > Software Update > Check now for update
AlderCass said:
Settings > About Phone > Software Update > Check now for update
Click to expand...
Click to collapse
Ok, that is interesting because if you downloaded kdz with your IMEI from official server, than your device is recognized from LG! Did you try to check you phone and software status with official LG Sync software or LGMobile Support Tool!
First you can try to clear cache and factory reset from recovery.
Second If you dont get this error with LGMobile support tool you can try to reflash with phone recovery option and then check via Settings > About Phone > Software Update > Check now for update again.
1. turn off phone, remove battery for few minutes
2. download lg flash tool from lg site, install it
3. in LGmobile Support Tool manually install drivers, need to click install drivers, select your model, wait to finish installation
4. with no battery in phone, hold volume- and in same time connect phone to pc, whait to pc recognize the phone and than put battery back to phone(if you get colored screen try with battery in phone and volume-)
5. in LGmobile Support Tool in Customer support menu select "phone recovery" and do what LGmobile Support Tool ask you to do
hpnxfox said:
Ok, that is interesting because if you downloaded kdz with your IMEI from official server, than your device is recognized from LG! Did you try to check you phone and software status with official LG Sync software or LGMobile Support Tool!
First you can try to clear cache and factory reset from recovery.
Second If you dont get this error with LGMobile support tool you can try to reflash with phone recovery option and then check via Settings > About Phone > Software Update > Check now for update again.
1. turn off phone, remove battery for few minutes
2. download lg flash tool from lg site, install it
3. in LGmobile Support Tool manually install drivers, need to click install drivers, select your model, wait to finish installation
4. with no battery in phone, hold volume- and in same time connect phone to pc, whait to pc recognize the phone and than put battery back to phone(if you get colored screen try with battery in phone and volume-)
5. in LGmobile Support Tool in Customer support menu select "phone recovery" and do what LGmobile Support Tool ask you to do
Click to expand...
Click to collapse
Yep, this one worked like a charm
Sent from my LG-P880 using Tapatalk 2
Ummm....it's not showing my model number under the driver menu. I select ATT but there is no E980. Suggestions? I know this is old and not my section but still wondering....lol
Hi,
a student in my class has bricked his LG 4x HD during ROM flash. He had asked around the Czech forum but no one gave a working advice, so I promised to ask here as I speak English better. Apologies if the same problem was handled here before, I'd checked briefly but didn't see it answered around. I'm translating from his Czech thread( http://androidforum.cz/post574659.html )
He tried to install Cyanogen mod 10.1, instaled APK, copied ROM and GAPPs into internal storage, switched off the mobile.... BUT instead of pressing power+volume down he pressed power and then volume down.(?) Now he's stuck on the LG logo. He took the battery out several times to no avail. He'd entered recovery menu, chose full wipe/factory reset with no result either.
Then he tried to follow the tutorial here http://forum.xda-developers.com/showthread.php?p=35971349 but after the "S/W Upgrade Please wait" screen he's stuck on the LG logo again. He said the logo was animated before but is just static now.
This is all I know, if this resembles something you'd seen before and got through, please share an advice. The boy - Mark - is 12, the mobile was his world, just got into waters too deep. I'm running WP 7.8 and my knowledge of android is limited...
Best regards from Primary School Ponikla, Czech Republic!
Hmm I've never touched any lg but if it is anything like a galaxy s2 then you are going to need an app called odin
Sent from my SCH-R760 using xda app-developers app
That we don't complicate try first with official LG emergency recovery flash, follow this five steps: http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9
If this don't help than we can try with other flashing methods, but i think that this would be sufficient!
...
hpnxfox said:
That we don't complicate try first with official LG emergency recovery flash, follow this five steps: http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9
If this don't help than we can try with other flashing methods, but i think that this would be sufficient!
Click to expand...
Click to collapse
I tried it, it always lags at 4%... :crying:
mark
Ok, than you can try this method:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7 (LG Flash tool and .dz create tool u can find here http://forum.xda-developers.com/attachment.php?attachmentid=1642495&d=1358114024 or use all programs from first link)
Notes for this method:
1. You can make your .dz and .dll file for your region (IMEI) specific .kdz with this http://forum.xda-developers.com/showthread.php?t=2207786 or just use euro open .kdz from first link
2. For this and every flashing method if you have problem you need first check your usb cable, plug it in usb slot in motherboard not in front-pc case hub or similar, you need to provide space on your HDD (when using .kdz if you do not have hdd space kdz can not been unpacked for program that is using it for flashing)- maybe because of this your kdz flashing stop at 4%
3. Just to be sure - Your phone is LG P880 not LG P880G?
No, in cze its p880.
Sent from LG Optimus 4X HD
hpnxfox said:
Ok, than you can try this method:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7 (LG Flash tool and .dz create tool u can find here http://forum.xda-developers.com/attachment.php?attachmentid=1642495&d=1358114024 or use all programs from first link)
Notes for this method:
1. You can make your .dz and .dll file for your region (IMEI) specific .kdz with this http://forum.xda-developers.com/showthread.php?t=2207786 or just use euro open .kdz from first link
2. For this and every flashing method if you have problem you need first check your usb cable, plug it in usb slot in motherboard not in front-pc case hub or similar, you need to provide space on your HDD (when using .kdz if you do not have hdd space kdz can not been unpacked for program that is using it for flashing)- maybe because of this your kdz flashing stop at 4%
3. Just to be sure - Your phone is LG P880 not LG P880G?
Click to expand...
Click to collapse
When I choose dll file and dz file, choose all 16 ports it´s do this (on image) and no progressing..
SXP88 said:
When I choose dll file and dz file, choose all 16 ports it´s do this (on image) and no progressing..
Click to expand...
Click to collapse
1) Shut down your device
2) Press Vol down Button while connecting to your PC to enable S/W Update
3) Go to Windows hardware manager > COM Ports > LGE Com Port
4) Under advanced settings change Port to Com41
5) Start LG Flash Tool
6) Enable all Com Ports under connection settings
7) Select .dll and .dz you want to flash
8) Disconnect your 4X HD from PC
9) Press Start in LG Flash Tool
10) Press Vol. down Button while connecting again to your PC
Now the flashing process should be started...
Thanks, you just saved me of typing
What's happening with the forum? 1 hour trying to open the threads and nothing...
Ok, if it doesn't work report. Some users had that same problem.
RuedasLocas said:
What's happening with the forum? 1 hour trying to open the threads and nothing...
Ok, if it doesn't work report. Some users had that same problem.
Click to expand...
Click to collapse
Same thing, not just 4x forum, in general..but we are back!
Please can you give me URL of windows hardware manager?? :silly:
---------- Post added at 04:53 PM ---------- Previous post was at 04:48 PM ----------
Fladder72 said:
1) Shut down your device
2) Press Vol down Button while connecting to your PC to enable S/W Update
3) Go to Windows hardware manager > COM Ports > LGE Com Port
4) Under advanced settings change Port to Com41
5) Start LG Flash Tool
6) Enable all Com Ports under connection settings
7) Select .dll and .dz you want to flash
8) Disconnect your 4X HD from PC
9) Press Start in LG Flash Tool
10) Press Vol. down Button while connecting again to your PC
Now the flashing process should be started...
Click to expand...
Click to collapse
Please can you give me URL of windows hardware manager??
SXP88 said:
Please can you give me URL of windows hardware manager?? :silly:
---------- Post added at 04:53 PM ---------- Previous post was at 04:48 PM ----------
Please can you give me URL of windows hardware manager??
Click to expand...
Click to collapse
Go to "control panel" and click on "device manager"
Fladder72 said:
1) Shut down your device
2) Press Vol down Button while connecting to your PC to enable S/W Update
3) Go to Windows hardware manager > COM Ports > LGE Com Port
4) Under advanced settings change Port to Com41
5) Start LG Flash Tool
6) Enable all Com Ports under connection settings
7) Select .dll and .dz you want to flash
8) Disconnect your 4X HD from PC
9) Press Start in LG Flash Tool
10) Press Vol. down Button while connecting again to your PC
Now the flashing process should be started...
Click to expand...
Click to collapse
Can you give me link on windows hardware manager? I can´t find it... I download windows manager but there isn´t LGE com port...
---------- Post added at 10:43 AM ---------- Previous post was at 10:36 AM ----------
Fladder72 said:
1) Shut down your device
2) Press Vol down Button while connecting to your PC to enable S/W Update
3) Go to Windows hardware manager > COM Ports > LGE Com Port
4) Under advanced settings change Port to Com41
5) Start LG Flash Tool
6) Enable all Com Ports under connection settings
7) Select .dll and .dz you want to flash
8) Disconnect your 4X HD from PC
9) Press Start in LG Flash Tool
10) Press Vol. down Button while connecting again to your PC
Now the flashing process should be started...
Click to expand...
Click to collapse
In device manager isn´t LGE com port... WHY??
SXP88 said:
Can you give me link on windows hardware manager? I can´t find it... I download windows manager but there isn´t LGE com port...
---------- Post added at 10:43 AM ---------- Previous post was at 10:36 AM ----------
In device manager isn´t LGE com port... WHY??
Click to expand...
Click to collapse
Did you tried the "easy" way?
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
If it doesn't work, report and we'll try to help you with pictures or something else.
RuedasLocas said:
Did you tried the "easy" way?
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
If it doesn't work, report and we'll try to help you with pictures or something else.
Click to expand...
Click to collapse
It lags at start... nothing progress in device manager i cant find LGE com port.. it isn´t there.. : O
SXP88 said:
It lags at start... nothing progress in device manager i cant find LGE com port.. it isn´t there.. : O
Click to expand...
Click to collapse
Follow the steps one by one.
Unless your device is connected in a port higher than 16, using the "easy" way (forget about the device manager), you should be able to have comunication with the device.
View attachment 1927169
To be able to see it in the device manager you need to have your phone connected in SW mode to avoid mistakes.
No rush, take your time to read and understand the entire process.
RuedasLocas said:
Follow the steps one by one.
Unless your device is connected in a port higher than 16, using the "easy" way (forget about the device manager), you should be able to have comunication with the device.
View attachment 1927169
To be able to see it in the device manager you need to have your phone connected in SW mode to avoid mistakes.
No rush, take your time to read and understand the entire process.
Click to expand...
Click to collapse
So, I do it exactly from your manual and still no progress i read it all several times. I tired.
RuedasLocas said:
Follow the steps one by one.
Unless your device is connected in a port higher than 16, using the "easy" way (forget about the device manager), you should be able to have comunication with the device.
View attachment 1927169
To be able to see it in the device manager you need to have your phone connected in SW mode to avoid mistakes.
No rush, take your time to read and understand the entire process.
Click to expand...
Click to collapse
There is it..
SXP88 said:
There is it..
Click to expand...
Click to collapse
Change USB, run as "administrator".
Some others had that problem, in front of "MODEL" you should see "X3"...
Some fixed it by changing USB. other running as "administrator", others changing cable...
I never had this problem. Might be related with the PC, I don't know.
You install "msxml.exe" right? and you turn ON "windows enabler"...
The Tool works well but, sometimes or, for some users, something wierd happends, and,
from out of the blue, they're able to flash without any problem...
Your LG Magna(H502) stuck on lg logo or bootlooping follow this guide to fix your device
Requirements:
USB Cable
LG Driver
LG FlashTool
MegaLock.dll
H502F Stock ROM
Let's start
1.Install the LG Driver
2.Install LG FlashTool and don't run it yet
3.Copy MegaLock.dll and replace in the folder LG FlashTool (C:\LG\LGFlashTool)
4.Turn off your device(remove battery and put it back to be sure its off)
5.Press and Hold the Volume UP button,plug in the USB cable and hold until you see "Firmware Update" you are now in download mode
Don't plug into usb 3.0 port and try other ports if getting issues
6.Open Device Manager on your PC
Go on "Ports (COM & LPT)" if the driver is installed properly, you will see "LGE Mobile USB Serial Port (COMxx)"
We need to change the COM port number to 41
Double click on "LGE Mobile USB Serial Port"
Go to Port Settings Tab and click Advanced
Change COM Port Number to COM41 and click OK
Disconnect USB cable,wait a few seconds and reconnect or reboot back in download mode to check if the drivers are working properly
7.Open LG FlashTool as admin
Tick the Select Manual Mode box
Extract LG Magna H502F.rar
Click the DLL "....." button and select the DLL found in the extracted folder(LGH502f_20150416_LGFLASHv190.dll)
Click the S/W add button and select the file with the .tot extension(LGH502fAT-00-V10a-CIS-XX-MAR-16-2015+0.tot)
Don't touch anything else and press ok
Flashing will format the phone all data will be lost
8.Click on the Yellow Arrow Button at the top left and it will start the flashing process
When you see ready in a few seconds you will be asked to disconnect and reconnect the cable and it will start flashing
It will take some time
During the flashing process, the phone will reboot itself and will display "MiniOS Factory Reset Status".Don't worry about it
When you see pass in FlashTool and Factory Reset Status 3 on your phone means the flashing process is completed
Disconnect the cable and remove the battery
Power on your phone and enjoy your working phone again (Don't forget to disconnect USB cable else if you didn't close the FlashTool it will go back in download mode and flash again)
Fixing problems
Factory Reset Status 2 and download fail
Method 1
1.Disconnect the cable and take out the battery after some seconds insert back
2.Press and hold both the power button and the volume down and hold until LG logo appears release the buttons and immediately press and hold both buttons again to go in Factory Reset
3.Choose Yes, then Yes again, the phone will reboot
Method 2
1.In step 7 where we are setting up the FlashTool change the action mode to Board DL instead of Upgrade DL
2.When the flashing is done your phone will reboot to the AAT Screen
3. Hold down power button and press normal boot (+power) your phone will reboot. (dont forget to disconnect usb cable or close the FlashTool)
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Install LG Drivers from here : https://sourceforge.net/projects/avicohh/files/Android/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe/download
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Try installing the driver when you are in download mode or try other ports in your computer.If it still doesn't work try this driver http://oceanhost.eu/x1b0tjlhzw1z/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe.htm
May the stock ROM work with h500f ?
Geralt1232 said:
May the stock ROM work with h500f ?
Click to expand...
Click to collapse
Nope
is this v10a? which ROM can be rooted and TWRPed?
xd
as I can install the KDZ I have the LG H502G And not catch any of that model Dll !! Help!!
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
You have to enable "Show hidden devices"
I lost data connection often when playing games or using any app can this problem solved by installing stock rom again? Plzz tell me the solution
Trying to get rid out TWRP
If I ever flash stock firmware, does custom recovery/TWRP be removed ?
yes.it will be replaced with stock...
Sent from Valhalla
Lg magna
My lg magna is not booting.
I tried installing a custom ROM it showed that it was done but its not booting now. Its not even booting to recovery mode. I've not tried flashing the a ock ROM but will it work.will it boot in download mode?
go to view option appear on that window and click on 'show hidden devices'
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Reply::go to view option appear on that window and click on 'show hidden devices'
Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks
Aneom7331 said:
Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks
Click to expand...
Click to collapse
https://lg-firmwares.com/lg-h500f-firmwares/
just find the country you are in.
I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying
Aneom7331 said:
I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying
Click to expand...
Click to collapse
yes. it will )
Hi, I'm in the same situation as Aneom7331, indeed I have a bricked LG Magna H500F and I'm trying to flashing a stock firmware. Where should I put the .kdz file in the lg flash tool 2.0.1.6? Moreover, the .kdz file has not a .dll file together with it, Thanks in advance
Someone have link to stock for h502y?