Database Develop

[recovery/device/sd error?] Nexus One not flashing

Hey guys i don't know if anyone of you had the same issue but any info/help could be helpful.
I used to flash my N1 A LOT! but today i have this strange issue. I wiped and flashed rodriguezstyle again for a clean start, but i only got the colorful X with the unlocked symbol at the bottom and then just a black screen. i thought I've done something wrong and flashed again, but with the same results.
i changed my sd and downloaded again the rom but still no luck, did a nandroid restore and the phone was working properly. then i got a bit frustrated. downloaded 2-3 more roms but the result was the same.
i read somewhere that flashing with battery <50% may cause some errors so left the phone off to fully charge and tried again... no luck
then i remembered i upgraded the radio and i downgraded it to the old one, but still the same results and nandroid doesn't work... jeeeesh... back to the new radio and to my nandroid, but its no fun owning a smart-phone if you cannot flash it.
anyone with the same issue or any helpful tips/instructions?

Try this:
When the phone hangs at boot, reboot to recovery, wipe cache and dalvik-cache and reboot from recovery. Does that work?
If not, you'll need to logcat the boot process and post the log somewhere for us to have a look at.
So, assuming adb is working on your computer, plug in via usb, use adb logcat > output.log and reboot the phone. Continue logging for about 60 seconds after the phone stops.
Post the log to www.pastebin.com and then link back here.

hmmmm ok i will post results in abt an hour. thanx!
hmmmm i think i sorted it out... reflashed recovery. propably i messed smthing in there! thanx for your effort!

Hello everyone!
Weird problem here, too.
I was backing up my SD card in view of a format/cleanup....and when I went to boot into recovery, my N1 was stuck on the black screen with the white letters at the bottom "Build : RA-nexus-v1.7.0.1"... The phone actually boots great, it is just not loading the recovery image. Is it possible that part of the flash got corrupted? If so, I'm pretty much done flashing my N1, right???
I'll post a log asap (if it could help any)...

Oh and btw i tried to re-flash Amon-RA's recovery twice already...Superboot said it was successful....but I doubt it...

Well try flashing stock rom! I flashed it through fastboot step by step and it worked. Also check if the rom you try to flash needs ext partition or if apps2sd is enabled
Sent from my Nexus One

Test
Sent from my Nexus One using XDA App

Thanks nica.
I had to flash stock boot and rom to fix it...
Sent from my Nexus One using XDA App

I may have bricked my HERO2000 trying to flash a custom ROM.

I'm new to this whole flashing custom ROMS business. I have a CDMA HTC Hero 2000 and I downgraded to the original 2.1 before the update just fine, rooted my phone just fine. Then I tried to flash Aloysius to it using instructions I found here: [Complete Guide] How To Flash A Custom ROM To Your Android Phone With ROM Manager + Full Backup & Restore | Android News, Reviews, Applications, Games, Phones, Devices, Tips, Mods, Videos, Podcasts - Android Police
After all was said and done, my phone starts to boot with the "HTC quitely brilliant" logo, following by "SPRINT the Now network" logo and after it shows "Now" for many seconds (as it normally does before pulling up the home screen), it reverts back to the HTC logo and repeats this process until I remove the battery.
I removed the microSD and attempted to boot, same thing. Then I held down HOME+BACK+POWER to do a manual hard reset, this took a little longer but again had the same result.
I may just cry now. Please help!!

Run the official sprint ruu, and see what that does for u. Then read the rooting guide here on xda and try it. I personally recommend amon ra recovery to flash roms, rom manger never seemed to work right. Feel free to pm for more help, dont worry u prob arent bricked unless u flashed a gsm rom (which aloysius isn't)
Sent from my HERO200 using XDA App

That's a bootloop not a brick You could try downloading a different rom and flashing it in recovery, nandroid restoring - if you made one, or flashing the same rom again. just wipe your phone before (data/cache/dalvik)

Didn't get a chance to get on here until now but I fixed it last night.
I did this by going back into reboot recovery mode (by pressing HOME and POWER), going to partition settings, COMPLETELY wiping everything on the sd card, mounting the USB and dragging a new ROM .zip file onto it. (I tired this twice without completely wiping and the phone continued to have problems booting.
The flash worked fine that time and all has been well. Turns out the first one I was trying to apply to it was just an upgrade.
Thanks everyone for your help, makes perfect sense now.

chrisdegraw said:
Didn't get a chance to get on here until now but I fixed it last night.
I did this by going back into reboot recovery mode (by pressing HOME and POWER), going to partition settings, COMPLETELY wiping everything on the sd card, mounting the USB and dragging a new ROM .zip file onto it. (I tired this twice without completely wiping and the phone continued to have problems booting.
The flash worked fine that time and all has been well. Turns out the first one I was trying to apply to it was just an upgrade.
Thanks everyone for your help, makes perfect sense now.
Click to expand...
Click to collapse
Four key words to remember when trying out any new rom
Nandroid is your friend!
additionally, you should always remember to wipe before loading a new rom!
Enjoy!

Yeah, don't ever panic, that was, as everyone said, a bootloop by textbook definition. I've never seen a brick before, but I'm damn sure it won't get as far as the Sprint logo. The only way to brick a CDMA Hero is to flash a GSM Radio/Bootloader to it.

Flashing issues

Hi!
Today I tried to flash the rom with Hashcodes CM9 build but ran in some trouble.The droid is rooted with motofail. Installed safestrap and booted into safestrap. I cleared the data/cache, wiped cache partition and wiped dalvik cache. Then I tried to flash it with the custom rom via the sd card and it did install. Then I reboot the phone. The phone will do all well until right when it passes the safestrap menu, the screen will remain black.
I tried steeldroid v5.5 too, same issues. It's a XT883
So the question is how do I fix this?
EDIT: Solved by flashing to a brazilian XT860 and then installing safestrap. (this thread explains how to) http://forum.xda-developers.com/showthread.php?t=1384676

Steamed_Egg said:
Hi!
Today I tried to flash the rom with Hashcodes CM9 build but ran in some trouble.The droid is rooted with motofail. Installed safestrap and booted into safestrap. I cleared the data/cache, wiped cache partition and wiped dalvik cache. Then I tried to flash it with the custom rom via the sd card and it did install. Then I reboot the phone. The phone will do all well until right when it passes the safestrap menu, the screen will remain black.
I tried steeldroid v5.5 too, same issues. It's a XT883.
So the question is how do I fix this?
Click to expand...
Click to collapse
I don't remember exactly where, but I seem to recall seeing a post about an issue with Safestrap and the XT883 not playing nicely together. There's a thread somewhwere on this forum about it I think. Another thing to try is to power down completely, pulling then reinserting the battery, then try booting up. Sometimes people get the blackscreen on their first boot with a new rom and need to do that.

linuxgator said:
I don't remember exactly where, but I seem to recall seeing a post about an issue with Safestrap and the XT883 not playing nicely together. There's a thread somewhwere on this forum about it I think. Another thing to try is to power down completely, pulling then reinserting the battery, then try booting up. Sometimes people get the blackscreen on their first boot with a new rom and need to do that.
Click to expand...
Click to collapse
I found the thread and tried to apply the things, but it failed to flash with RSD lite.
I rebooted the phone multiple times and sometimes waited over 10 minutes for it to 'boot'. The only way to shut down the device is to take out the battery.

Steamed_Egg said:
I found the thread and tried to apply the things, but it failed to flash with RSD lite.
I rebooted the phone multiple times and sometimes waited over 10 minutes for it to 'boot'. The only way to shut down the device is to take out the battery.
Click to expand...
Click to collapse
If you've got ADB, Moto-Fastboot is a fer better bet than RSDLite.

[Q] Boot lopp w/ AP, Plz help.

Droid 4 running Stock Jb 4.1.2, Safestrap 3.11, Liquid smooth 2.9, CM (last stable)
Everything working fine for a number of months, installed Liquid smooth via -> delete romslot 3, create romslot 3, install Liquid 2.8.
It ran for a number of days no problems. Restarted fine, all features worked great, even the annoying random restart from 2.4 went away.
6 - 10 days in, im surfin' the news sites at work, put it down, screen goes black, i pick it up. Hit the power button cause i realize its off and it just boot loops... so bad i had to vol-/+ pwr, go to flash mode and THEN turn it off b/c it just kept trying to restart, hang on logo.
I got home and decided to AP flash the latest:
9.8.2O-72_VZW-18-2
Blur_Version.98.72.182.XT894.Verizon.en.US for the maserati.
Boot looped a few times, i was able to get it to go into recovery mode, after that it loaded up the stock JB system. First boot it crashed and restarted, second boot it loaded but only the keyboard worked, not the touch screen. Went to the in OS option of factory reset mode + delete storage.
Rebooted, worked. Checked it a few boots, everything is fine. I use Druid 4 Utility Xt894 JB version and apply the root. Works great. Install safestrap, Create new partition, install liquid smooth 2.9. Works for an afternoon... at work today the touch screen stops responding, i restart it a few times. I try to enter recovery mode. Now im in boot loop again...
I've tried re flashing it again, a few times. I tried even going down to the previous release of JB for the phone. STILL 4.1.2!!!! But nothing.... it just boot loops... what did i do wrong? It was running great. No tweaks or anything done to it prior to it having its melt down.
Help please.. ive provided as much information as possible and though i only joined XDA now to post for help, i have read it for a long time as my main source for my phone and have donated to both CM and Liquidsmooth teams previously..
help!!!

I can't see where you are doing anything wrong. You have obviously done your research and have a good idea of what you are doing. I see, after you fastbooted, you went back to Liquid. I think I would try running CM10.1 or even stock for a few days and see if you have the issue there as well. If you do than it sounds to me like it might be a hardware issue. If not, maybe try re-downloading Liquid. Perhaps your zip got corrupted somehow.

I would love too. In fact i would be willing to run it on the stock crappy 4.1.2 if i could get it out of boot loop this time...
It just keeps boot looping on the logo. AP Fashboot flash and BP flash work but recovery and normal boot/reboot mode just goes into M logo boot loop.
I've re downloaded the 4.1.2 jb SBFs from 2 different sources to ensure its not a corrupt file, tried 18_1 and 18_2 software versions...
Is there a way to use the abd shell to get into the filesystem and check whats going on? Is the SBF the last call? or is there another route to see whats going on or just flash EVERYTHING? Like completely back to stock?
I can find my way around a PC file system but im not familiar with linux. Please help me understand, Is it like having CMOS and BIOS settings or equivalent to damaged CMOS firmware? What am i not replacing/reverting by SBF and HOW can i replace/revert BEYOND the basic sbf...
If ya point me in a direction or to someone who can help me out i can do all the foot work just point me in the right direction?

Is this applicable? I found a site talking about using CWM in a ADB shell file push to possibly get access to more features?
The article also goes into reading the busybox / ADB command screen? (sorry for not proper jargin) and see what its doing during the boot loop before it restarts?
Id add the link but i need more posts....

Update: Flashed 18_2 again with a "factory cable" i made, let it boot loop a series of times before it started up into the stock system again.
At first, again the touch screen wouldn't work, random lockups and restarts, etc. Since i just got it into the main system again and i had to leave for the weekend for a trip(no wifi or network), i couldn't mess with it all weekend but i left it on the whole time and kept checking its functionality... gradually its come back to full function. Touch screen works and is accurate, no more lockups, no more restarting, even stopped boot looping when i restart and enter recovery..
Im not sure and i couldn't find any forum converstations or write ups to support to idea but i think after a major crash and you flash new or reflash your SBF, it seems the phone needs time to recalibrate and index? Not sure, but just an FYI. Gonna try loading SS and liquid again.

problem with factory reset

hello, i recently bought used droid 4, found it to be with some leftover data (sms, and such) so first thing i did was a factory reset only to
find it after a while in extact same state. weird thing is that when i factory reset it after removing some apps or changing anything at all it acts
as if i restored some backup instead of wiping device. it spams me with errors every few seconds too which is quite troublesome to say the least.
i searched the internet for an answer (still looking) to this problem but so far got nothing. i mean there are lots of ppl with similiar issue
but no real answer anywhere i looked. i thought maybe flashing some stock rom (dont wanna try anything custom yet since i got lapdock
too and havent checked if webtop works with custom roms yet). is it the right direction in my case or is there some simplier answer to my problem?
thanks in advance
update: cant root it, cant install official update through rsdlite, cant update through other unofficial ways,
it acts as if everything went fine and each time im back to square 1. it aint my first or second journey with rooting,
changing rom but im not really sure what else can i do. also rsdlite cant detect any information about device (imei,
os version, flex drm boot etc are all filled with N/A
install from sdcard also failed - signature verification failed. keeps gettin better. downloading another rom from
official moto website... not expecting anything though

wyklocnik said:
hello, i recently bought used droid 4, found it to be with some leftover data (sms, and such) so first thing i did was a factory reset only to
find it after a while in extact same state. weird thing is that when i factory reset it after removing some apps or changing anything at all it acts
as if i restored some backup instead of wiping device. it spams me with errors every few seconds too which is quite troublesome to say the least.
i searched the internet for an answer (still looking) to this problem but so far got nothing. i mean there are lots of ppl with similiar issue
but no real answer anywhere i looked. i thought maybe flashing some stock rom (dont wanna try anything custom yet since i got lapdock
too and havent checked if webtop works with custom roms yet). is it the right direction in my case or is there some simplier answer to my problem?
thanks in advance
Click to expand...
Click to collapse
uncheck restore data Hard Reset - DROID 4 by MOTOROLA - Verizon Wireless Support
update: cant root it, cant install official update through rsdlite,
Click to expand...
Click to collapse
updates.zips are not installed with rsdlite, XML/firmware is install with rsd lite, but adroid version can not be downgraded
cant update through other unofficial ways,
it acts as if everything went fine and each time im back to square 1. it aint my first or second journey with rooting,
changing rom but im not really sure what else can i do. also rsdlite cant detect any information about device (imei,
os version, flex drm boot etc are all filled with N/A
install from sdcard also failed - signature verification failed. keeps gettin better. downloading another rom from
official moto website... not expecting anything though
Click to expand...
Click to collapse
what official site? use files from my page How to Use RSD Lite to flash a .XML Stock Rom (firmware)

thanks for taking interest
tried factory reset with options You mentioned unchecked, same thing as before.
i did use xml with rsdlite and zip through built in recovery.
tried to find this page i downloaded files but theres too much in yesterdays history, trying those from Your link now.
also tried to update rom ota, but of course theres an error. oh my droid runs 4.0.4, i havent mentioned it before.
also, found in the net schematics for factory cable, was thinking if its worth a shot this way:
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable-4.html

Factory cable only allows you to power device with low battery/no battery
Sent from my Amazon OtterX using Tapatalk
---------- Post added at 10:33 AM ---------- Previous post was at 10:31 AM ----------
Update zips only update specific system versions, you have to use correct one, and must be complete stock.
Sent from my Amazon OtterX using Tapatalk

from what i read in this post about factory cable it says it boots phone different way than normal thats why i thought maybe
itll be able to successfully update with it. also after every reset of this droid its not a simple matter of apps coming back thru wifi.
wifi is disabled and theyre there right from the start. i can remove some widgets or apps from home screen, i can delete texts,
and after reset theyre all back where they were. its as if every change i made havent been saved. i dont even have to reset phone,
i just need to reboot it to have it all back

phone needs to be in AP Fastboot mode when flashing with rsd lite.
verify md5 checksum for xml file before flashing.

yes, it was in ap fatboot mode, didnt verify the md5 tho.
more importantly, file i downloaded from site You linked passed verification! guess what i found wasnt official updates after all...
i hope this works

wyklocnik said:
from what i read in this post about factory cable it says it boots phone different way than normal thats why i thought maybe
Click to expand...
Click to collapse
Factory/Fastboot cable only uses the alt power (4) pin to power device, there are several pre-made ones
itll be able to successfully update with it. also after every reset of this droid its not a simple matter of apps coming back thru wifi.
wifi is disabled and theyre there right from the start. i can remove some widgets or apps from home screen, i can delete texts,
and after reset theyre all back where they were. its as if every change i made havent been saved. i dont even have to reset phone,
i just need to reboot it to have it all back
Click to expand...
Click to collapse
try reformatting internal sd card, before wiping
---------- Post added at 10:58 AM ---------- Previous post was at 10:53 AM ----------
wyklocnik said:
yes, it was in ap fatboot mode, didnt verify the md5 tho.
more importantly, file i downloaded from site You linked passed verification! guess what i found wasnt official updates after all...
i hope this works
Click to expand...
Click to collapse
there are no official moto download sites, all moto firmware is pulled by people with special access, and reuploaded

try reformatting internal sd card, before wiping
Click to expand...
Click to collapse
is it any different than checking "erase internal storage" when reseting phone?
anyways did it but atm have to recharge battery before trying to wipe it again.
also rom was succesfully updated thru recovery with no errors and after reboot im... back to square 1...

wyklocnik said:
is it any different than checking "erase internal storage" when reseting phone?
Click to expand...
Click to collapse
formatting is different than wiping data, in menu>settings>storage>unmount>format
anyways did it but atm have to recharge battery before trying to wipe it again.
also rom was succesfully updated thru recovery with no errors and after reboot im... back to square 1...
Click to expand...
Click to collapse
did system version change?

same story after formating internal memory.
no changes whatsoever. same homescreen, same widgets/apps present. same system version.
and of course new error every 5 seconds. guess the phone is messed up good.
talk about luck. its second droid 4 i bought. first i bought over a month ago on auction site, it was new. i paid, guy never sent it.
now this one. its like a curse

formatting internal won't wipe, user data, but will wipe backup data.

tried xml with rsdlite now.
after first reboot its supposed to go into the recovery mode right?
it went back in to ap fastboot... and after rsd transfered all the files then it went to bootloader... and now program says reboot is in process while phone sits in recovery mode...

wyklocnik said:
tried xml with rsdlite now.
after first reboot its supposed to go into the recovery mode right?
Click to expand...
Click to collapse
it happens sometimes
it went back in to ap fastboot... and after rsd transfered all the files then it went to bootloader... and now program says reboot is in process while phone sits in recovery mode...
Click to expand...
Click to collapse
select wipe data, then select reboot

done, nothing changed.
also, when rsd works it acts as if it doesnt wait for the phone with operations.
it writes reboot, phone starts to reboot, and long time before it boots back either in ap fastboot mode or into recovery
rsd says its already transfering files, it says reboot again (before phone even gets into fastboot or recovery after 1st reboot) and so on.

wyklocnik said:
done, nothing changed.
also, when rsd works it acts as if it doesnt wait for the phone with operations.
it writes reboot, phone starts to reboot, and long time before it boots back either in ap fastboot mode or into recovery
rsd says its already transfering files, it says reboot again (before phone even gets into fastboot or recovery after 1st reboot) and so on.
Click to expand...
Click to collapse
which fastboot version? 0A.74 , 0A.77?
which xml file?

0A.74
cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml

looks like you have a failure to write data, don't think there is a fix.
could try my Unbrick Moto device with moto-fastboot.exe
but unlikely that it will work