I have it set on the defaults. 245-998. and governor on demand. does this make sense? abit noobish sorry. running enomther
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Also, I hope all these settings are reversible.. ie if I uninstall the program it goes back to what it was before?
The default settings is what heard works best. I don't use setup because it feels like I get worse battery life with it. I feel my phone gets great battery life without the program. Yes if you uninstall and reboot you are back to the settings before you installed the program.
That's not the part that saves battery, you need to enable profiles and down clock the cpu when it is asleep.
Which profiles do we enable? (that's the same basic setup I'm using too)
anyone?
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
I'm sure someone will answer. I just downloaded set CPU to play with so once I find something I'll post.
you can enable the sleep/standby profile (setting the max to 245 and min as 245 as well); you can also set up the charging profile, failsafe profile, and when the power is below certain level
EDIT: the very basic setting to save some battery would be to enable the Standby/Sleep profile (set both max/min to 245)
Ok. Looking at it it seems very simple.enable profiles. Edit the sleep profile and set tour max to whatever you like. Seems straightforward to me, this is the first time I've looked or messed with it.
Oops. Should've refreshed before posting.
Ok. I'm using Enomther 1.8.1. And in spare parts there is a setting to set max and min cpu frequency, i left it as defualt which is the same default in SetCPU min max 245/998
So I went into profiles and enables sleep profile and set min max 245/245 but when I come out.. it says my defualt is now max min 384/245
Why did the defualt change im using only sleep profile and main profile
EDIT: makes sense the Max would fluctuate since I set it on demand.. Of course I wouldnt expect the CPU to be at 998 all the time . Sleep set at 245/245
I set all profiles to be 'on demand' and then sleep is 245/245, awake is 245/1113 and charging is 245/652 (stop it getting too hot)
imo sleep on 245/245 isn't the best. cos basic functions like clock won't be updated. it would update when wake causing even more CPU draw. my sleep is set at 325 max
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
exactly. Oh by the way, I just saw your msg, I use both juicedefender and setcpu.
S_Dot said:
imo sleep on 245/245 isn't the best. cos basic functions like clock won't be updated. it would update when wake causing even more CPU draw. my sleep is set at 325 max
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
can you tell me your full set CPU profiles and their values
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Replied to your PM
S_Dot said:
can you tell me your full set CPU profiles and their values
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
rjhay22 said:
Replied to your PM
Click to expand...
Click to collapse
So anyone with setcpu experience willing to help yet?
Sorry... It wasnt meant to be a secret lol.
Heres my Set CPU setting if im not using AVS.
Default: 998/245
Profile Settings
Charging: 806/245
Sleep/Standby: 384/245
Power < 40% : 886/245
Power < 30% : 844/245
Power < 20% : 806/245
Failsafe Batt > 40C : 768/245
Good Luck!
PhantomRampage said:
So anyone with setcpu experience willing to help yet?
Click to expand...
Click to collapse
Thanks for the help man, hopefully this'll help me out a bit with my battery life.
Those profiles are all 'on demand' though right?
PhantomRampage said:
Thanks for the help man, hopefully this'll help me out a bit with my battery life.
Those profiles are all 'on demand' though right?
Click to expand...
Click to collapse
They all are
Hey guys can someone share what's the best profile and configuration to double the battery life in our devices using setCPU..
Thanks in Advance!
Sent from my CSL-MI410 using XDA App
Hi there,
I think, it depends on how is your settings now. You can try 500 mhz and disable mobile data first.
hmm.. okay.. will 500Mhz double the life and also give a decent performance??
i'm more concern on the voltage control.
can everyone share their fine profile for voltage?
btw, my setcpu setting were recommended by CacingKalung.
25mhz and 1125mhz with smartassv2.
thepranam said:
Hey guys can someone share what's the best profile and configuration to double the battery life in our devices using setCPU..
Thanks in Advance!
Sent from my CSL-MI410 using XDA App
Click to expand...
Click to collapse
The following works for me all the time
Main Profile - MAX - Dont set it all the way to OC if you are using any of the modded kernels, keep it just above 1Ghz, i set at 1200.
MIN - around 600. Use SmartassV2, if unavailable use Performance.
Turn on Profiles and set 2 important profile
Screen Off - MAX & MIN - 122Mhz. Priority 90%, Set governer Conservative
In Call - MAX - Around <=500, MIN = Around 300, Priority - 100, Set governer Performance. This is to avoid any lags when call comes in
With this I am able to stretch the battery easily to 1.5 days. I have observed the performance to be uniform whether on CM7 or MIUI.
Additionally I also configure Adv Task Killer Pro - Always on, Kill Task when screen off, and dont forget to set Ignore for - SetCPU.
This combo of SetCPU and Task Killer works for me ! Try and see if it meets your expectations
How are you able to set exact values of 122 MHz or 300/500 MHz?
On stock ROM, SetCPU only allows for a slider to control the frequency which doesn't allow for precision setting since after about 368 MHz the slider only goes to around 700+ MHz skipping all the frequencies possible in between.
Rgds
Sandy
Im using SET CPU and the ondemand governer gives very good battery life. I keep the min speed to 122 MHZ and Max to 1024 MHZ.
Made three profiles for screen off, temp >40deg and In call. Screen off profile kept to 122MHZ, certainly improved my battery by leaps and bounds.
http://forum.xda-developers.com/showthread.php?p=28663827
So someone posted this in the 4g slide forum, it was used in the sg2 forum
It seems as if it should work, not knowing how scripts work i wanted to ask some smart people if this would be safe on the touchpad.
Ive been running it on my 4g slide with great results
What do you think?
Sent from my cm_tenderloin using xda premium
its fine. it wont hurt your device to set cpu profiles to apply certain cpu settings when your touchpad is idle, screen off, battery low, etc etc. theres tons of free apps that can set cpu profiles. i use system tuner pro, and rom toolbox pro. also most cm9 roms will have profile settings in the system settings menus.
I recently rooted my Atrix HD, and it is now performing terribly -- Extremely laggy and slow, comparable to my old G1. I installed a good number of tweaks, primarily one to hide the soft keys and one to dim the screen lower than normal, along with the standard ROM Toolbox and such. I also installed Safestrap. Could a particular buggy application be causing this? My CPU monitor shows one core scaling normally, and the other nearly always stuck at max speed. I haven't tweaked the CPU clock speed or governor at all.
Download android tweaker and set the settings to performance.
Sent from my MB886 using xda app-developers app
So the most basic setting in setcpu is changing the clock frequency using the slider. Even if I leave it at a max of 1ghz, the device still operates at 1.7. I tried different governors and disabling perflock but it says they doesn't exist.
So right now setcpu just displays information and doesn't give me much power in changing how it runs. Does anyone have an idea why?
HD revolution GE, stock kernal, rooted & unlocked bl.
Sent from my HTC One using xda app-developers app