Related
hi,
whenever i connect my touchpad to my windows pc it asks me to format it
I did originally have cm9 install but run in to trouble and me being the noob i am didnt have a restore so i uninstalled cm9 using the acme uninstaller and everything was fine, I then proceeded to try and reinstall cm9 back onto the touchpad however it seemed to me that all the files i had put on my touchpad gets deleted.
i have doctored my touchpad twice and removed the cm9 stores using novaterm via the lvs method as for some reason when i uninstalled cm9 the cm-data, cm-system etc and resized the media partition but still when i connect the touchpad to the computer it still asks to format the drive.
I have searched the forum and the internet and still no joy :/ any ideas for a fix would be apperciated
Thanks
If you reset the partitions like in the recovery thread, then you should be set, but if not, try this:
Rebuild them completely, as per the thread in the General about Recovery and Downgrade. Then Doctor it with 3.0.0, then 3.0.5. Once that's done, boot into WebOS, and do a full erase and format - that should fix it. Theoretically.
thanks for your help ve6ay I followed the thread and it seemed to fix the problem thanks so much ics install time
Glad I was able to help, mate.
I'm sure I have done something stupid and if I can't get this fixed it's not the end of the world. My moboot defaulted to CM7 until I used recovery to flash CM9 nightly. Since then it has defaulted to WebOS. CyanogenMod shows up as the second option in moboot. I have tried the following directions to change the default to CM9 with no luck;
Cyboot to change to "android" - Still defaults to WebOS
Internalz pro on webOS to change moboot.default to "CyanogenMod" (with no quotes, case sensitive, which matches the Ulmage.CyanogenMod). I did this in developer mode on WebOS and saved it- Still defaults to WebOS. I confirmed in root explorer that the moboot.default is changed to "CyanogenMod" no quotes.
Used Terminal in android (can't find the link but followed directions exactly, same idea, changing moboot.default)- Nothing
Wiped everything and flashed CalssicNerd, changed the moboot.default accordingly - No luck.
Wiped everything again, flashed CM9 nightly, again tried cyboot, internalz pro, terminal, root explorer, still no luck. The moboot.default file is definitely changed to "CyanogenMod" no quotes.
Any ideas???????
Wipe clean with webOS doctor and then clean install of CM9
Sent from my cm_tenderloin using Tapatalk 2
That is not the answer I wanted but I thought it was probably going to be necessary
One more noob question, once I have wiped and reinstalled CM9, using Titanium to "restore all apps and system data" shouldn't cause the problem again should it? I'm assuming titanium doesn't mess with the boot folder? Are there things in "system data" that could be causing the problem? I guess either way I will find out shortly!
Thanks
Hey Use adb shell then:
mount -o rw,remount /
mkdir /boot
mount /dev/block/mmcblk0p13 /boot
echo Cyanogenmod > /boot/moboot.default
Should work if it doesn't you'r going to have to clean install i think its mainly because you flashed CM9 over CM7 without Wiping the TouchPad.
No luck with ADB. when I run the mkdir /boot I get "mkdir failed for /boot, File exists"
After running the rest of the commands it makes the new moboot.default file but puts it on the SD card main directory, not in the boot folder overriding the current moboot.default. (which is already CyanogenMod anyway)
Anyway, I'm just going to wipe and do a clean install. Thanks for the suggestions.
Edit: Wiped everything, started from scratch with eyeballers unofficial nightly cm9. It was still going to WebOS so I checked and there was no moboot.default. Created one with root explorer and I'm good to go. Plus I love this rom!!
Thanks again to all the people that help noobs like myself.
Glad that you resolved your problem if u need any help just ask
I wish I'd caught this before you wiped everything. Try adding a blank enter at the end of the moboot.default file - it's what I found fixed the error for me.
The other thing you could've done was booted into WebOS, installed PreWare from your PC, and then installed CyBoot and modified all your boot settings that way - you could set it to default to android, set the timeout to less or more than the default 5 seconds, etc.
ve6ay said:
I wish I'd caught this before you wiped everything. Try adding a blank enter at the end of the moboot.default file - it's what I found fixed the error for me.
The other thing you could've done was booted into WebOS, installed PreWare from your PC, and then installed CyBoot and modified all your boot settings that way - you could set it to default to android, set the timeout to less or more than the default 5 seconds, etc.
Click to expand...
Click to collapse
I think he clearly states that he tried that on his first post
Whoops. Now I see where he said he tried the Cyboot method. My bad. But the blank enter at the end, I'm not sure he said he did or not. And for some reason, it needs that blank CR/LF at the end of the line, else it sometimes (for some people) doesn't work.
It's all good, It was a good excuse to play around with new ROMs and learn some new stuff. Truth is when everything on the touchpad is running just how I want it, I get bored. I like tweaking it more than I like using it
If I ever run into the same problem, or find someone that does, I will pass on your advice of the blank enter. Thanks
editi guess sdcard is incorrect/confusing for my situation, it's the entire system up to root folders is stuck in a read-only type state.
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected]ost #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
plasticsoldier said:
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected] #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
Click to expand...
Click to collapse
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
plasticsoldier said:
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
Click to expand...
Click to collapse
I would suggest trying to restore down to WebOS 3.0. In that procedure you literally wipe EVERYTHING on the internal partitions in novaterm and start from absolute scratch. Therefore, if it a software issue you could solve the problem. However, if it is a hardware issue, you'd be kinda screwed.
Yeah, none of the methods I've ended up finding about this problem or other bricked problems are working at all.
i checked at work when i bought it, which of course the 11th was the year mark... but I do have android installed so even if i can get any chance of them honouring it so close they'll probably be like "oh you have android, that'll be $$$ for us to do anything. thanks!"
So I guess I now I have a paperweight with some features.
cdzo72 said:
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
There is a thread in the General forum about how to restore and downgrade. Have you tried that thread ? It is usually a great way to try and get that last restore before sending it back to HP.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App
how are you adding and deleting files when in android? which version of android do you have installed? have you tried different rom versions? have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to? it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard? are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android? have you run "fix permissions"? Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
sstar said:
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
Click to expand...
Click to collapse
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
cdzo72 said:
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the answer, this would tend to suggest that the problem is software based corrupted or otherwise. I am trying to find a program that will allow me to read/format the Android partition on my windows computer and will let you know if come up with anything.
Regards
i guess i should change the title slightly.. it's not sdcard, but basically the entire touchpad contents. go to root and delete whatever i want and it doesn't matter. connect it and format with windows and it doesn't actually matter.
haxin said:
how are you adding and deleting files when in android?
Click to expand...
Click to collapse
i've added and deleted just by using mtp. i've also deleted the files on the android side with the video player (vplayer) i've installed es file explorer (which after restart is gone) and deleted with that. i've also gone into webos and installed internalz pro and deleted files that way, which it then seems to work until i of course do anything related to restarting.
some of the files i've put on, i've had it recognize briefly. so for the video file, start it, then it gets really choppy/glitchy playing it. so stop it, go back into the vplayer and it's back to the old stuff
which version of android do you have installed? have you tried different rom versions?
Click to expand...
Click to collapse
android version 4.0.3. nothing else will install. if i add files while in android, when i boot into cwm they are gone. if i mount usb in cwm and add them they stay briefly but when i try to flash them they fail.
have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to?
Click to expand...
Click to collapse
i have not tried adb yet, just not as familiar using it properly, i will give it a try though.
i am using windows 7 on my laptop currently. i do have a pc upstairs that i barely use that has vista, but i don't know how that would make a difference to the touchpad
it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard?
Click to expand...
Click to collapse
yeah as i put above i guess saying sdcard was a bit confusing/misleading (my bad, sorry!), i didn't really know what else to call it at the time or how to explain myself properly at first.
are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android?
Click to expand...
Click to collapse
i can move/delete/modify anything which has absolutely no effect to the device. i've used es file explorer and gone up to root and deleted everything and the system runs fine. says the system is empty with lots of free space (its the 32gb model) but restart or even go into recovery and everything is once again there.
have you run "fix permissions"?
Click to expand...
Click to collapse
i've run it a few times. just acts likes it's working and then says done. i've even gone into the mounts and storage in cwm and formatted sdcard/cache/data/system. does nothing at all in the end of things
Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
Click to expand...
Click to collapse
it was just something to try to get somewhere right. it never gets past 12%. always fails to reboot.
I am currently letting the battery drain and see if it dying and then being charged will do anything. probably not. but who knows. i talked to a "tech" on the chat support (i never mentioned android) who told me that having preware installed in webos causing it to become corrupt and they "don't knowledge of preware installed devices" exact words. no idea what that means haha don't have knowledge, don't acknowledge...
anyhow. i've not quite given up. i just don't really see it turning out any differently from the previous times. i do appreciate all the feedback and help very much though
ok so heres what I would try. First try flashing a new fresh rom. download one that you want to your computer like cm9 nightly or aokp or whatever you feel like. then boot into CWM recovery connect the touchpad to the computer via usb. then connect to the touchpad with adb. I'm not sure how to do this in windows because it's been so long since I've done it on a windows box, I always use linux.
adb has alot of options, you can move files to and from the device, you can uninstall or install app packages, and more. this way you can adb push the rom .zip to the touchpad's sdcard while youre in cwm recovery. this way you dont have to reboot the touchpad and risk having the file disappear, you can just go to 'install zip from sdcard' and then 'choose zip from sdcard' in cwm recovery after you adb push the rom, you should see it in the folder you pushed it to on the sdcard.
If you arent familiar with how to use adb from the command line or the terminal this might not make alot of sense and i dont know how better to explain it than that. Also yes windows 7 vs windows vista does make a difference there are issues with novacom installing properly, that's why you would have problems running acmeuninstaller or acmeinstaller2. if you look around you should find some videos or how to's that can probably explain it better. Hope this helps.
http://www.webos-internals.org/wiki/Novacom_with_Windows_7
http://forums.webosnation.com/webos-internals/295881-webos-doctor-12-issue-fixed-5.html
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
ve6ay said:
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
Click to expand...
Click to collapse
Probably the best suggestion yet given that everything else has been tried.
Good luck.
****EDIT****
Before you attempt the step above I have just noticed a difference between between cwm and. TWRP2.2 which I have installed on my Touchpad via goo manager. If I open recovery via goo manager and then select wipe it gives me 4 options cache, davlik, factory reset AND system which i think says will remove your rom . I don't see the forth option available with the regular cwm/clockwork. Just a thought.
All the best with whatever you try next.
sstar said:
Probably the best suggestion yet given that everything else has been tried.
Good luck.
Click to expand...
Click to collapse
this would work, however you have to fix you novacom/novaterm issues on your windows machine before you'll be able to do any of this. the reason acmeuninstaller, acmeinstaller2 arent working is likely because youre on a windows7 64bit box and Palm-sdk, the novacomd.exe, noverm.exe, and javaruntime apps and drivers arent setup right. just make sure you have the proper javaupdates on your computer then you can install preware in webos, preware has some nice tools that will delete the entire android install partitions, one is called 'remove android' and the other is called 'tailor' you run them from within webos. after you do that then in webos you should do a full device reset. you'll find it in the "info" tab under settings in webos. this will delete and reformat the whole /media ,(aka sdcard) partition. so you will lose all the files you have stored on both webos and android. that format will take a long time probably like 30 min or more. after thats done. reboot the hp and run webosdoctor. now i know for sure this will work because ive done it on mine. remember to put the touchpad in developer mode in webos first to install preware. you can do that by typing webos20090606 into the webos search bar and hitting enter. I'll put links from my box.com accou t to everything you need.
https://www.box.com/s/479acdb6ef9c99fc7b92
https://www.box.com/s/1aed4722990aad251570
edit: also I'm not sure if youre on the 16gig 32gig or 64gig pad, the webosdoctor that i linked is for 32gig wifi only US version. if thats not what you have then youll need to get the doctor for for specific touchpad. or you could create a webosmetadoctor but thats a whole nother project.
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
plasticsoldier said:
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Click to expand...
Click to collapse
ok no one will be able to help you fix this issue unless you give complete details of the problems. when you say " novacom/novaterm stuff doesn't work" we cant really help specific error details is what i need. I dont mind helping you fix this but you have to be a little more specific on exactly what,where, and how youre installing and running and mounting apps and directories.
your problem IS fixable but you need to slow down and really do things exactly step by step.
Ok so back to ./adb. now when you boot in to CWM recovery on he touchpad DONT do anything in CWM just plug it into the computer. do not mount it as a usb storage and dont mount or unmount the sd partition LEAVE IT.
you can then use ./adb from the command line or terminal on the computer to move the files to the touchpad' or install apk's uninstall apk's you name it. This will require that you know some linux terminal commands. for example to move a new rom zip to the internal sd card or into any other folder you can use ./adb push command to run a root shell on the android device itself you can use ./adb shell and then change folder and file properties from readonly to rw. this can all be done while the touchpad is patiently waitng in CWM recovery. this way when youre done installing or uninstalling apps from the device and moving flash zips to it, you can disconnect the .adb connection with ./adb disconnect or just type exit from the terminal till it closes. unplug it then you will be able to pick up the touchpad and install zip from the sdcard, keep in mind you dont want to choose 'apply u[date from sdcard' you want to use the 'install zip from sdcard option' you can read up more on how adb works. it is probally the most important part of hacking android.
with that being said. novaterm is the palm webos version of .adb. this is why when you boot into webos recovery to do things like acmeinstaller and acmeuninstaller2 the novaterm novacom and novacomd apps have to be installed correctly on the computer or else you wont be going anywhere fast. some screenshot examples of how it should appear below.
https://www.box.com/s/432e63a83215f00eea6a
https://www.box.com/s/970bc29542a05f98f036
https://www.box.com/s/63c0f656e8354f7f2d6a
https://www.box.com/s/cbe3266467ae8e3ebabe
https://www.box.com/s/005e56a61a178dd17fa4 some better resolution images.
Plasticsoldier said
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Yes there is
Firstly tailor does exist, it is a beta and the facility to dl must be enabled.
Read this and scroll down to Enabling beta test feeds and follow the instructions , when you get as far as using the Linux command you CAN copy and paste thank God.
http://en.m.webos-internals.org/wiki/Testing_Feeds?wasRedirected=true . After that reboot into Webos and launch preware. Go into managed feeds as per the instructions in the link above and install Tailor. Reboot again and the app will work. It looks very good actually.
But before attempting to actually use Tailor please read the article I have posted below it is only 7 pages long but will explain how to use Taylor properly as it is a powerful tool.
http://forums.webosnation.com/webos...partition-filesystem-editor-beta-testing.html
I have done all of this , this morning so if you have any problems pm me or ask in this thread.
I sincerely hope that this helps, it should be the answer to your problems.
@haxin: sorry, wasn't trying to be unhelpful when everyone is being helpful to me. I shall be more detailed in future responses. I think i was getting frustrated and had had a busy exhausting day so it didn't help me come across clearly/properly.
OK, so I had preware installed already, so I removed it, went into developer mode, used the linux commands, reinstalled preware, added Tailor.
(i've done this a few times, because I didn't remove the cable after doing the linux commands for preware, then i accidentally hit the wrong buttons and it connected to 'usb drive' mode and wouldn't connect on the pc side and got stuck on the "ow disconnected me properly next time" screen).
So it gives me the following options
USB (media)
Android (system)
Android (cache)
Android (data)
Unused Space
the 'usb media' starts mounted and will mount again if unmounted. If I use 'check filesystem' it'll pass. So then I try 'delete partition' which pretends to delete, then it takes me to the unused partition which is still at 16mb. so i try to use "check filesystem' again and it fails. try repair and it fails as well
I've tried mounting the android parts just to see, they just sit there processing that they are trying to mount. trying to delete or anything else fails as well.
and now after trying things, any of the 'cards' will try to open and just sit there grey. and with my usb cable not plugged in it still is giving me the option to enter usb drive mode. and with this i have to restart and go through the steps again of adding Tailor which is getting tedious.
I restarted, went through the motions to get back to Tailor. trying out resizing just to see how that goes. So far 15%. not sure what will happen when done, but we will see.
This is getting long, so i'll end this part and update on anything and also try to familiarize myself with adb a tad more
Greetings, developers and friends!
My Touchpad is now stuck in a continuous boot, with Android backed up in Clockworkmod but I tried restoring and didn't work. A couple of days ago I deleted info on my SD card because it was too bogged down and didn't let me update anything. I did my best but I decided to do this,so I own it. Attempted to flash with Roland's video instructions and got all my files in order: Problem is, on the command prompt I get a message of "Device Not Recognized.
Here's what I see when booting:
Moboot 0. 3. 8
HP logo
boot ClockworkMod
boot Cyanogenmod
boot WebOS
boot webOS Recovery
reboot
shutdown
Then the screen goes light dark, as if the animation of CyanogenMod is going to be up and running but it doesn't. Is there a remedy to fix the SD card problem, maybe that will take care of it and my laptop can see the TouchPad? Backup works fine on ClockworkMod, restore does too but nothing happens.
Any takers? I have another HP tablet that I will not mess with, but I'd rather have both running Android.
Thanks,
chicawhyte
chicawhyte said:
Greetings, developers and friends!
My Touchpad is now stuck in a continuous boot, with Android backed up in Clockworkmod but I tried restoring and didn't work. A couple of days ago I deleted info on my SD card because it was too bogged down and didn't let me update anything. I did my best but I decided to do this,so I own it. Attempted to flash with Roland's video instructions and got all my files in order: Problem is, on the command prompt I get a message of "Device Not Recognized.
Here's what I see when booting:
Moboot 0. 3. 8
HP logo
boot ClockworkMod
boot Cyanogenmod
boot WebOS
boot webOS Recovery
reboot
shutdown
Then the screen goes light dark, as if the animation of CyanogenMod is going to be up and running but it doesn't. Is there a remedy to fix the SD card problem, maybe that will take care of it and my laptop can see the TouchPad? Backup works fine on ClockworkMod, restore does too but nothing happens.
Any takers? I have another HP tablet that I will not mess with, but I'd rather have both running Android.
Thanks,
chicawhyte
Click to expand...
Click to collapse
UPDATE: Was able to get through the Android removal, but it bothers me that one of the scrolling messages says, "no cminstall dir found, nothing to install.
chicawhyte said:
UPDATE: Was able to get through the Android removal, but it bothers me that one of the scrolling messages says, "no cminstall dir found, nothing to install.
Click to expand...
Click to collapse
TouchPad toolbox will solve it.
Moody66 said:
TouchPad toolbox will solve it.
Click to expand...
Click to collapse
Where is the Toolbox? Looked in Preware, Just Type and everywhere else and I can't find it. Thanks.
Found it on another thread, printed it out. Will take care of this after work. Thanks.
chicawhyte
chicawhyte said:
Found it on another thread, printed it out. Will take care of this after work. Thanks.
chicawhyte
Click to expand...
Click to collapse
It didn't work....aborted.... :crying:
It didn't, it aborted. I tried Roland's way and attempted to flash it but still the message is the same, no cminstall dir, power off when ready. Let me see if I can get a hold of him or JC (it'd be incredibly lucky for me) I hope my tablet can get the Android back.
Roland asked me about this, this is my reply. Feel free to help out.
chicawhyte said:
It didn't, it aborted. I tried Roland's way and attempted to flash it but still the message is the same, no cminstall dir, power off when ready. Let me see if I can get a hold of him or JC (it'd be incredibly lucky for me) I hope my tablet can get the Android back.
Click to expand...
Click to collapse
+Roland Deschain Ok Roland, what I have tried was to gain more memory on my tablet; there were several apps deleted, cached space, did all I could because I had an update via Goo.im. I tried to flash it but I was not successful; asides from that, there were automatic updates that the Touchpad did not allow due to low storage space.That is when I made the serious mistake of deleting the SD card.
I tried to uninstall according to your instructions and then load up the 5M to go back to full throttle, but for whatever reason when the scroll happened the messages were off-key, meaning that folders and files were not installed and not the usual way. That's when I realized there was trouble; I had made two Nandroid backups that are still in the Touchpad. I had only WebOS and no Android to be seen. I restored the most recent backup via ROM Manager and I thought that that would do the trick, still no Android (?).
I decided to try and reach out to my fellows at XDA-Developers because I try everything before I go to the forum; I know the rules there. That's when I was made aware of the Toolbox by JC Sullins and I downloaded it. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Thanks for your work and for helping us turn a good tablet into the best tablet around!
Greetings,
Please read below my message to Roland and my problem below/wanted to add that now on both computers (my laptop where I do the flashes) and my husband's where I copied the Palm, Inc. folder to attempt Android there-the message I get is that "there is no hardware found" on the command prompt.
Please try to follow the instructions and explain things when requested
chicawhyte said:
Hello Roland, help!!!!! Please read this thread and let me know if I have to wipe everything and restart from scratch with WebOS Doctor. Here's the thread from xda-developers: http://forum.xda-developers.com/hp-...r-boot-loops-deleted-sd-t2803190/post53886856. Runs WebOS fine, but no Android to be seen; files are there but it won't let me format the whole tablet. Thanks!
Click to expand...
Click to collapse
RolandDeschain79 said:
"Hey so I took a look but that just tells me you're confused and trying to follow multiple sets of instructions. Can you list what you've tried and where you get stuck. There's no cminstall folder in this set of instructions its a ttinstall folder. Did you complete the first steps of uninstalling android and wiping the USB drive?"
Click to expand...
Click to collapse
chicawhyte said:
+Roland Deschain Ok Roland, what I have tried was to gain more memory on my tablet; there were several apps deleted, cached space, did all I could because I had an update via Goo.im. I tried to flash it but I was not successful; asides from that, there were automatic updates that the Touchpad did not allow due to low storage space.That is when I made the serious mistake of deleting the SD card.
I tried to uninstall according to your instructions and then load up the 5M to go back to full throttle, but for whatever reason when the scroll happened the messages were off-key, meaning that folders and files were not installed and not the usual way. That's when I realized there was trouble; I had made two Nandroid backups that are still in the Touchpad. I had only WebOS and no Android to be seen. I restored the most recent backup via ROM Manager and I thought that that would do the trick, still no Android (?).
I decided to try and reach out to my fellows at XDA-Developers because I try everything before I go to the forum; I know the rules there. That's when I was made aware of the Toolbox by JC Sullins and I downloaded it. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Thanks for your work and for helping us turn a good tablet into the best tablet around!
Click to expand...
Click to collapse
Please try and limit your conversation to one location. People who spam my YouTube channel and the forum with the same questions tend to get permanently banned without warning. Consider this a warning.
chicawhyte said:
......That is when I made the serious mistake of deleting the SD card.
.......I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Click to expand...
Click to collapse
Secondly if I ask you a question try to answer it as completely as possible. Don't tell me you made a mistake by wiping the SDcard then refuse to tell me how you did this even after I asked specifically about it. Claiming that you know how to wipe the SDcard then asking for specific instructions how to do so doesn't give me confidence in your ability. If you wiped the SDcard from a windows PC then you've made your own problem and completely ignored all the available instructions.
chicawhyte said:
. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
Click to expand...
Click to collapse
I'm having a very hard time understanding why you say you're stuck on step 1, which is installing novacom and backing up your data, when you're talking about step 5 installing android???
Step by step instructions have been provided and I even made a long video that reads you all the info. No one can help you to follow instructions that's up to you. Saying you didn't want to follow the instructions then asking for help is just silly. If you do not wish to change the layout of your touchpad just stick to the Non data media roms.
New Super Easy Way Guide and video available
[ROM GUIDE]How to use the TouchPad Toolbox to install Android "The Super Easy Way"(DM & Non-DM)
I did a search and did not find anything so here it goes. I am running KitKat on my HP Touchpad with no issues. However, I was going to try and load the new MM build. When I try to go into the usb mode by either rebooting and selecting webos recovery or by pressing the vol key and power button while it is rebooting, I do not get the usb symbol, but instead I get 4 designs that appear identical except for shades of color. It freezes in that state (or at least a couple of minutes). To get out of it I do the pwr and press menu 15 times to reset. I am used to using the toolbox, but can't get to it this way. Is there a way to get back to the usb from here? PS. Detailed steps are preferred if possible.
You could load TPToolbox onto the /boot partition so you don't need to use pc and webos recovery?
Peace.
chris5s said:
You could load TPToolbox onto the /boot partition so you don't need to use pc and webos recovery?
Peace.
Click to expand...
Click to collapse
Thanks, but I'm not sure which files to place where. I can still get pc access via twrp 2.8.3, but I have wiped the tp of an OS so I'm really messed up.
golfnut22 said:
Thanks, but I'm not sure which files to place where. I can still get pc access via twrp 2.8.3, but I have wiped the tp of an OS so I'm really messed up.
Click to expand...
Click to collapse
So you still have moboot and can boot in recovery?
And can you access the TP using adb?
If you can mount the sdcard thru twrp, can you not copy the files over from the pc to install an os , prob kitkat at this stage?
Otherwise use adb to push the files over, eg using these commands:
adb push /sdcard/name.of.kitkat.rom
adb push /sdcard/name.of.gapps.file
All done whilst in recovery, then use twrp to flash the rom.
Once kitkat reinstalled, use a rooted file manager, eg ES File Explorer to get TPToolbox into the boot folder.
If you manage to get kitkat up and running I'll detail the next steps.
You could circumvent all this by deleting webos from /boot and pushing TPToolbox all using adb but i dont feel confident telling you how to do that, so the 'longwinded' way may be better!
Peace
chris5s said:
So you still have moboot and can boot in recovery?
And can you access the TP using adb?
If you can mount the sdcard thru twrp, can you not copy the files over from the pc to install an os , prob kitkat at this stage?
Otherwise use adb to push the files over, eg using these commands:
adb push /sdcard/name.of.kitkat.rom
adb push /sdcard/name.of.gapps.file
All done whilst in recovery, then use twrp to flash the rom.
Once kitkat reinstalled, use a rooted file manager, eg ES File Explorer to get TPToolbox into the boot folder.
If you manage to get kitkat up and running I'll detail the next steps.
You could circumvent all this by deleting webos from /boot and pushing TPToolbox all using adb but i dont feel confident telling you how to do that, so the 'longwinded' way may be better!
Peace
Click to expand...
Click to collapse
Thanks Chris. I am able to get into moboot. I just now mounted the TP, created a folder called ttinstall (which is what the tptoolbox always used), copied my kitkat rom and gapps into that folder, unmounted the tp, then from twrp ran install for the rom first then the gapp and it all worked. I still may try your way to get to the toolbox, but at least now it is working again. I have had several of these over the years and this is the only one that gives me a weird pattern on the tp when I want to go into recovery. Thanks for the response.
golfnut22 said:
Thanks Chris. I am able to get into moboot. I just now mounted the TP, created a folder called ttinstall (which is what the tptoolbox always used), copied my kitkat rom and gapps into that folder, unmounted the tp, then from twrp ran install for the rom first then the gapp and it all worked. I still may try your way to get to the toolbox, but at least now it is working again. I have had several of these over the years and this is the only one that gives me a weird pattern on the tp when I want to go into recovery. Thanks for the response.
Click to expand...
Click to collapse
The four block weird design or pattern apparently was just substitue picture of the usb symbol as far as I can tell. I was thinking because I did not see the usb symbol, it was not going into recovery, however, the tptoolbox loaded anyways and I was able to perform the changes to ttinstall folder as ususal. I'm not sure why I get that weird pattern instead of the usb symbol, but nervertheless, it worked. I may try MM now.
golfnut22 said:
The four block weird design or pattern apparently was just substitue picture of the usb symbol as far as I can tell. I was thinking because I did not see the usb symbol, it was not going into recovery, however, the tptoolbox loaded anyways and I was able to perform the changes to ttinstall folder as ususal. I'm not sure why I get that weird pattern instead of the usb symbol, but nervertheless, it worked. I may try MM now.
Click to expand...
Click to collapse
Cool! Running flintman's MM build right now, well worth a punt!
Peace.