Related
My Phone: Stock Eclair 2.1 JH7 update Build 1006
(amazingly no GPS or shutdown issues)
Rooted
Voodoo Lagfix
That's It.
I read alot on here about upgrading to Froyo, regarding having to un-root and stopping lag fix. I could not figure out how to stop lagfix, which I figured I had to be rooted to do so, so I just didn't un-root either. So my mistake I just said F-It and started Kies Mini and plugged in my phone. My firmware updated and my phone rebooted, however it gets to the Galaxy S screen, and instead of booting up my screen goes black and nothing happens, like it shuts off. So, what should I do from here, as this is my only phone, and I don't have readily available access to a computer.
get to the download mode and reflash to stock using odin.
well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.
ConeyKiller said:
well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.
Click to expand...
Click to collapse
the key combo may not work on certain build phone. if it happens to your phone, you have to build a jig yourself or buy one (i can send you one, PM me).
ConeyKiller said:
well that's what I was thinking of doing, however. it seems I can only boot into recovery mode. Vol. Down button and Power button. The three button combo seems to do nothing for me, don't know why. So how do I get into Download mode? My first phone WAS the three button combo.
Click to expand...
Click to collapse
fire up ODIN 1-CLICK
connect USB to Computer
remove battery from phone
replace battery
hold down both volume buttons
insert micro USB into phone
*DOWNLOAD MODE!*
Well I sure do appreciate that offer. Vol. Up & Vol. Down button with ODIN open and Then plugging in USB got me to download mode. heh I pushed Master Clear, so we'll see what happens.
THANKS!
I figured that out right before you posted it! you Canadians are alright. lol
I would give you a thanks, but I can't find the button for you!
clemmie said:
fire up ODIN 1-CLICK
connect USB to Computer
remove battery from phone
replace battery
hold down both volume buttons
insert micro USB into phone
*DOWNLOAD MODE!*
Click to expand...
Click to collapse
Been about 15 mins since hitting Master Clear phone still says Downloading... Do not turn off target. I forget, having only flashed once to the leaked, does it usually take this long?
ConeyKiller said:
Been about 15 mins since hitting Master Clear phone still says Downloading... Do not turn off target. I forget, having only flashed once to the leaked, does it usually take this long?
Click to expand...
Click to collapse
you cannot be in the download mode if you just want to do a master clear. boot the phone normally, enable the debug mode and do the master clear using odin there.
No it shouldn't. Another thing that helped was to install the driver package that is included in the Original Post for 1-click. If that still doesn't work after 5 or so minutes, unplug and try again, but this time just go for the ROM flash. You should see the blue status bar moving on the phone. I had the same issue. This took me a few tries.
well odin now says Removed! like i'm supposed to celebrate. phone still says downloading.. lol I guess I should have hit START instead.
Thanks so much clemmie. phone is back to stock you can master clear in download mode, just takes 20 mins. lol I hit start instead and it put me back to the stock jf6. now time to get froyo wee! thanks alot guys, thread can be closed and deleted if you would like.
ok guys i'm definitely a noob at this but i think i messed up this morning downloading the gb drivers for my captivate. i was running serendipity 6.4 and i was trying to flash serendipity VII. i didn't flash back to stock 2.1 eclair with odin one click before i followed the instructions on downloading the new drivers for the gb. i went to the power menu on the 6.4 and hit download mode and plugged in the usb. it went halfway through the downloading process and stopped. my screen was blank without the downloading sign anymore and on odin it was at a halt. i waited for about 45 minutes for it to proceed and nothing so i unplugged it. when i did the factory recovery screen came up and i could use the volume up and down buttons to scroll through the menu choices but it wouldn't let me use the power button to make a selection at all like the power button wasn't working. i pulled the battery and put it back in after a while and now all i get is the galaxy s gt-i9000 samsung screen and nothing else. it wont let me back into recovery or download mode no matter what button combo i try. did i brick my phone and is there a way for me to fix this without having to buy another one? any help would be greatly appreciated.( guys, i realized i messed up shortly after it was done and messed up that i should've odin one clicked it back to factory before i did this,but by that time it was too late.)
When a problem comes along, you must jig it!
You might want to look into buying/making a jig to get you to a place where you can repair your phone.
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Please use more descriptive thread titles. Your title is useless to anyone doing a search.
440hsp said:
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Click to expand...
Click to collapse
Could you please quote/reply to these steps to getting into download mode?
From powered-off state, Hold V+/V-, insert USB cable
With battery out, Hold V+/V-, insert USB cable
From powered-off state, Hold V-, press & hold power button
If you haven't tried this combo yet, try using the home softkey in place of the power button with some of these combos - there have been reports of the power button getting remapped to the home softkey.
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
440hsp said:
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
Click to expand...
Click to collapse
Just out of curiosity, when you're at the android man/exclamation screen, if you have odin up already and plug in the phone, does it recognize that the phone's attached?
If so, you might be able to use the odin one-click to get back to stock eclair.
i will try that and get back to you. hopefully it will work.
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
440hsp said:
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
Click to expand...
Click to collapse
Hmm... I've reached the end of things I know to say to try. I'm assuming you've tried changing which port you're plugging your phone into on the computer?
Also, have you tried using adb to reboot to download? If not, get adb and use the "adb reboot download" command (I think...) to see if that gets you there. You may need to be in the recovery menu (if you can get back there), or the exclamation point / android guy might work, too.
Although, if you can get back to recovery, you might be able to mount your phone to the computer, drop a copy of CWM on there and reinstall that so you can have more options available to you.
Your best bet at this point might be to buy or build a jig. That should hopefully make the phone go into download mode so that you can get to where you need to be.
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
440hsp said:
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
Click to expand...
Click to collapse
Nope, root isn't needed to flash that ROM.
440hsp said:
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
Click to expand...
Click to collapse
Good to hear there's a glimmer of hope. If you do manage to get there, you might want to make an EFS backup before moving any further, just so you have one more tool in your arsenal of preventing phone problems.
After reading this whole thread I think your problem is that you now have gingerbread bootoaders and your button combos have changed and you don't know it.
Sent from my SAMSUNG-SGH-I897
i think you may be right about having the GB bootloaders. now first question is how to i manage to make an efs back up? secondly, if i have the GB bootloaders then what do i do to flash the complete serendiptiy VII onto the phone? the reason why i ask is because the phone just quit downloading the flash in the middle of the download and that's when all hell broke loose. lolol. but you guys are right. i might just have a glimmer of hope.
If you do have the GB bootloaders, you should (theoretically) be able to get to download mode with the volume - & power button combination. This may take a little fiddling to find a timing after you've started the phone to find out when you can get to it.
As far as flashing Serendipity, you could try, but my advice would be to try and get to stock Eclair first and then go forwards. You're in a place with a lot of variables, and stock Eclair would be as variable-free as you're likely to get.
As far as backing up the EFS, under the CWM recovery menu, there's an option to make a nandroid backup. That's step 1. Once you've made the backup, just copy it from the clockworkmod folder to a safe place.
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
440hsp said:
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
Click to expand...
Click to collapse
--------------------> delete
+1 on the jig...odin is very finicky and a jig will get you to download mode when you need it most...
buy or make one...worth every penny.
I had Cognition 4 flashed but had a problem that whenever the battery was removed when the phone was on, about half of my apps, wifi, and texting would force close on reboot and never be able to open until I reflashed Cogntion. Because of this, I decided to try Serendipity VII. I put the zip file on my phone, rebooted into recovery, then tried to do the same thing that I did for Cognition. When I did this it said that it was installing, then said install complete without rebooting. I decided to reboot the phone, and when I tried, it keeps looping on the att screen. I do not see the battery charge signal when I plug it in. I see a loading gear for the battery for about five seconds, then the screen has electric looking blue lines flash through the center and then nothing. I cannot boot into recovery or download, it just keeps looping on the ATT screen.
Make or buy a jig to force it into download mode.
Sent from 234 Elm Street
slow_DC4 said:
Make or buy a jig to force it into download mode.
Sent from 234 Elm Street
Click to expand...
Click to collapse
How do I force it into download mode?
So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*
cappysw10 said:
So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*
Click to expand...
Click to collapse
Ya, I had a feeling I should have read more about it, but I was anxious and stupid. I didn't do any of those things. No matter what I try I can't get to recovery. How would I get into download?
JIG
10 char
Thanks for all the help, I will be buying a jig from amazon for about ten bucks. I hope this works. But if it doesn't, at least this will teach me to read instructions before doing something that I don't understand very well.
to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped
srkoza said:
to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped
Click to expand...
Click to collapse
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway
jmj45 said:
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway
Click to expand...
Click to collapse
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers
Mr. Janderson said:
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers
Click to expand...
Click to collapse
I tried this and all it did was do the att loop screen thing. Also, my computer dinged that it saw a usb device being plugged in, but then the restart loop restarts the phone and continues this indefinitely. Thanks for the help anyway.
You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.
abmicyau said:
You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.
Click to expand...
Click to collapse
Thanks, but I already screwed up my phone by doing something that I did not fully understand, it's a small wonder that I can use Linux and not be too confused. I think I will take the easy way out with this one.
Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?
Mr. Janderson said:
Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?
Click to expand...
Click to collapse
It loops if whether or not I hold any buttons down. If I hold the power button down while trying to get into download mode, then it just turns it off.
Turn off the phone, remove the battery, get a stock odin one click for the captivate.
I897UCJF6-final-OCD-REV0 seems to be a reliable flash when I run into trouble.
Start odin, plug the phone into the USB cable, hold the volume up/down key or try any combination up/down or both. Insert the battery and hopefully it will go into download mode.
Been reliable so far...
Hi. I'm unable to get into recovery mode after I flashed the Talon kernel as per the instructions here.
http://www.team-continuum.net/forum...ses/(guide)general-installation-instructions/
I'm consistently able to get into download mode and reflashed the talon 0.1.2 kernel as per the instructions there, but still to no avail. Any other suggestions to get my phone into CWM ?
Im trying to flash Continuum 6
Might as well get the Jig easy Download mode xD. I made mine myself cost a whole $2.50 for one xD
Hello all, I have had my captivate for almost 2 years now and I am just now deciding to make the jump to rooting and getting a custom ROM put onto it. I have been reading about the processes available to root and flash and it seems like almost all of them need the phone to be restarted into certain types of modes and steps requiring the use of the lock or power button. The thing is.. for the past year the lock button on my cappy has not functioned. I have tried many fixed and the button just does not work. When I need to restart my phone I always just take the battery out, and upon putting it back in my phone turns right on. My question is, can I root and flash without needing to use this button, and if so, how? Thank you for all of the help!
To gain Root...
What Android Platform and Firmware are u running ??
If something before KK4 then try this... [APP]SuperOneClick.
Or see this... FuguRoot for i897 as posted in the Captivate Android Development. The [MOD] FuguRoot is just a kernel swap method. Just be sure to flash back the stock kernel that u r on right now after u have flashed the mod root kernel.
I am using the 2.3.5 kk4, so does that mean the second one will do for the root?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Yep. U just need a .tar of the Stock KK4 Kernel.
Sent from my SAMSUNG-SGH-I897 using xda premium
OR (instead of Stock KK4 Kernel), just use the .tar KK4 Corn Kernel version 7.0A, it is stable and has CWM Recovery and some extra stuff in the Recovery.... **** Matter of fact, u can get Root through that cwm recovery of that kernel. Just flash it through regular Odin. Boot into the recovery (and since ur power button is messed up) u can navigate through the cwm recovery with the "capacitive" buttons on the captivate. --- Menu= Down, Home= Up, Back arrow= Back, Search button= Select
(didn't think bout this option of using the capacitive buttons til today). ****
Sent from my SAMSUNG-SGH-I777 using xda premium
Thats great I will try it this evening! Thanks a ton for your help, I had never even heard of the capacative buttons and cwm nut it sounds like it may be a fix for me!
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
problem..
well aparrently my power button thinks it is continuously being held down, (which is not the case, I've checked). Therefore it will not go into download mode, only recovery mode.. This really is a let down because I downloaded all of the necessary files and was really stoked for this to work.. Unless you or anyone else has a suggestion I'm stuck.
If u have flashed the kernel with cwm, then try pulling ur battery, hold volume up and volume down at the same time, replace battery and the phone should boot. Continue to hold volume buttons until u see the at&t screen, then release. U should boot into cwm recovery.
Only thing now is...i am not sure, that since ur power button appears to be stuck all of the time, if u will be able to navigate and select effectively through cwm with the capacitive buttons...
Sent from my SAMSUNG-SGH-I777 using xda premium
Have you taken apart your captivate backing plate to get to the power button??
Does the power button work at all, any intermittent working? also how do you get your phone to wake from sleep?
anyways, I've posted about cleaning out a power button many times. i'll go grab a previous post and edit it for you.
Do this cleaning procedure at your own risk: Don't break anything.
It's really easy to use a small( I mean correct size for the screws) screwdriver and pull the back plate off the phone and give everything a good cleaning out. You won't believe the junk you find in there. Chances are there's junk up in the power button. I used to have power button issues till I took it apart and cleaned it mine would get stuck on, or work intermittently.
There is a guide(with pics) to tear it down and put it back together here:
http://forum.xda-developers.com/showthread.php?t=740022
I've probably disassembled mine 3 or 4 times. Never had any trouble I only use 3 of the 6 screws to hold the back plate on. it's easier to deal with only three.
Also, an alternative method it to use your fingernail or thumbnail to peel back the plastic by the screen near the power button area. once you do this try your best to press your lips up to the phone and blow air through the crack. I use this method almost every two weeks to get my power button to behave properly.
I think it's possible to replace the power button, might require soldering. I'm not sure though, I've never needed to do it.
4-2ndtwin said:
If u have flashed the kernel with cwm, then try pulling ur battery, hold volume up and volume down at the same time, replace battery and the phone should boot. Continue to hold volume buttons until u see the at&t screen, then release. U should boot into cwm recovery.
Only thing now is...i am not sure, that since ur power button appears to be stuck all of the time, if u will be able to navigate and select effectively through cwm with the capacitive buttons...
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Well dont I have to first go into download mode to flash the kernel? I cant do that because I can basically only go to recovery mode.
see that's just the thing. I have taken off the housing multiple times, there is nothing on or around the button that is causing it not to press. in fact, I can press the button and nothing will happen. it's like the hardware is malfunctioned or something. Also I just use the no lock app to turn my display on whenever I need to and if I take out the battery as soon as I put it back in it powers back up.
Partridge86 said:
Well dont I have to first go into download mode to flash the kernel? I cant do that because I can basically only go to recovery mode.
Click to expand...
Click to collapse
U could use a Jig or ADB to reboot to download mode.
Or see mobiletechvideos.com for the repair of ur power button. They are very trustworthy and reliable and respected here on xda.
Sent from my SAMSUNG-SGH-I897 using xda premium
ADB to reboot to download mode?
I'll just leave this here: http://forum.xda-developers.com/showthread.php?t=1763853
Well after searching on that site I decided to buy a jig from amazon for just under 3$. I'm just gonna hope that it does the trick!
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Red_81 said:
ADB to reboot to download mode?
I'll just leave this here: http://forum.xda-developers.com/showthread.php?t=1763853
Click to expand...
Click to collapse
^
Yes...i have got to add this to my sig links !!
Sent from my SAMSUNG-SGH-I897 using xda premium
I currently have The Collective's AoCP build 3 Jelly Bean ROM on my Captivate. I need to go back to the Cyanogen 10 builds because it looks like they've fixed the lag issue. I came upon a really bad accident on my way to work and needed to call 911 ASAP. I unlocked my phone and hit the phone button and it must have taken 20 seconds for the dial pad to come up. I've gotta try something else...
My question is this. I can't get into recovery by turning the phone off and using the 2 or 3 button salute. I've tried volume up - power, volume down - power, and volume up&down - power. No dice. I've learned there is a 3buttonfix that I can download and install, but I read about it first and it says if you're running this bootloader or that bootloader don't use this fix because you WILL hard brick your device. I have no idea what bootloader I'm running and if I can't use this fix, what do I do to fix the issue? For future reference, how do I tell what boot loader I'm running?
The reason I want to MAKE SURE the 3 button salute works is I want to flash from AoCP to CM10 and if something goes wrong, I need to be able to do that. I can hold the power button down now, and choose reboot, then boot into recovery, and that works, but if I soft brick my device, that function won't do me any good.
Any guidance you pros out there have for me would be greatly appreciated. Thanks in advance!
Don't use the 3 button fix. You are correct in that it will hard brick your phone. If adb works, you can use that to reboot into recovery. I think you can do that with a terminal emulator too ("su" first to get root access, then "reboot recovery").
There's not a way to tell which bootloader your on. If you want to know 100% without a doubt your on the latest, flash the kk4 stock ROM. Downside to that is you would have to start over on cm10 or any other aokp. Making a nandroid first will make it less painful.
Also, that dialer lag will happen with any ICS-JB ROM on this phone. It's pretty much unavoidable at this point. Have you ever done the recovery combination before? If not, then you may be doing it wrong. Hold down the volume buttons, and press the power button only until the screen turns on. Hold the volume keys down until you hit recovery.
Oh, duh, you're on AOcP. You should have a recovery option in your power menu under reboot.
Oh said:
I do have a recovery option int he power menu. But what if I soft brick my device? I have a rigged jig somewhere, but that wasn't reliable for me. Not because it doesn't work, but because I made it very, um, frugally.
So there is no way to know what boot loaders I'm on? Darn... I didn't do the original flashing. MobileTechVideos.com did the flashing after I hard bricked it where my jig no longer even worked.
Thanks all for your input, and anything else you may suggest.
Click to expand...
Click to collapse
If you're on AOCP you have GB bootloaders.
Sent from my SGH-I897 using Tapatalk 2
spagman72 said:
If you're on AOCP you have GB bootloaders.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
THANK you very much for that info. Do you know of anyway for me to be able to boot into recovery mode using a key combination? I tried what was mentioned above (holding volume up-down after pressing the power until it boots into recovery, but it just goes right to the AoCP boot animation).
Maybe your holding the buttons too long when you try the button combo.
Snevey said:
THANK you very much for that info. Do you know of anyway for me to be able to boot into recovery mode using a key combination? I tried what was mentioned above (holding volume up-down after pressing the power until it boots into recovery, but it just goes right to the AoCP boot animation).
Click to expand...
Click to collapse
You may have already tried this in your many attempts but I'll still throw in my two cents.
Starting with power off hold all three buttons at the same time. First you should see the att splash screen and then your kernel splash screen. Then the phone should turn off. Keep holding the buttons til you see the att screen again and then release them all. That should get you into recovery. At least that is exactly how I get there besides of course the power menu.
Sent from my SGH-I897 using xda app-developers app
Wait are you missing download mode also?
Sent from a jelly bean
Yes, I do appear to be missing download mode as well... What have I done? The phone runs just fine with AOCP The Collective, except it's just getting too laggy for me and I want to check out CM10's newest releases. BUT, I don't want to be flashing ROM's until I can boot into Recovery. I can REBOOT my phone from my Power menu once the phone boots up, but I can not get any button combination to work to boot me into recovery.
Regarding download mode... I can not enter download mode either. I power down, take battery out, remove SIM, place battery in phone hold volume up/down and insert usb cable. Just displays the battery charging meter...
When your phone turns on, do you have a white AT&T screen or is it a black gt-i9000 screen?
Sent from a jelly bean
korockinout13 said:
When your phone turns on, do you have a white AT&T screen or is it a black gt-i9000 screen?
Sent from a jelly bean
Click to expand...
Click to collapse
I do get the white AT&T screen... It comes on, then flash to a black screen and then back to the same white at&t screen, then to The Collective boot animation. This wouldn't be a problem for me, but I do want to play with some other ROM's, but I don't want to without this working...
I believe you can reboot in recovery using adb with the command : "reboot recovery"
Sent from my SGH-I897 using Tapatalk 2
spagman72 said:
I believe you can reboot in recovery using adb with the command : "reboot recovery"
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I KNOW I can, but I can only do that if I am able to boot into a rom. What if something gets hosed?
Snevey said:
I KNOW I can, but I can only do that if I am able to boot into a rom. What if something gets hosed?
Click to expand...
Click to collapse
Find that jig you rigged up and see if that gets you into download mode. If so I suggest using a one-click back to kk4 and I'd get the one with boot loaders for good measure. Then see if you can do any of the button combos
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
Find that jig you rigged up and see if that gets you into download mode. If so I suggest using a one-click back to kk4 and I'd get the one with boot loaders for good measure. Then see if you can do any of the button combos
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the suggestion... I downloaded a 1 click to KK4 and used my jig, which worked. Got really lucky, as something happened at the SET PIT table during the ODIN process and I had to start over. Luckily it didn't brick, but on the next boot I got the icon of a phone and a computer with a triangle in between those icons. I ran ODIN again after booting into download mode, and it took. I'm not running KK4 and I can do the 3 finger salute, so now I'm going to start over with rooting and moving to Jelly Bean. What a way to get the recovery back...
Thanks again for everyone's assistance.
Snevey said:
Thanks for the suggestion... I downloaded a 1 click to KK4 and used my jig, which worked. Got really lucky, as something happened at the SET PIT table during the ODIN process and I had to start over. Luckily it didn't brick, but on the next boot I got the icon of a phone and a computer with a triangle in between those icons. I ran ODIN again after booting into download mode, and it took. I'm not running KK4 and I can do the 3 finger salute, so now I'm going to start over with rooting and moving to Jelly Bean. What a way to get the recovery back...
Thanks again for everyone's assistance.
Click to expand...
Click to collapse
Glad that got you up and running. Sometimes it's unavoidable to flash back to stock like that but I suggest you keep that one click handy in case something else strange happens.