Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Balbaroth said:
Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
Click to expand...
Click to collapse
Same thing happen me too, i was flashing KL3 from CM9 build, even if flash through PC odin also i got Samsung screen boot loop. then i did clean wipe, everything went fine after wipe.
dr.ketan said:
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Click to expand...
Click to collapse
did cleared the cache ,
and the dalvic cache ( which says no such files or directory )
after i tried the wipe data , still no success...
im stuck on Samsung Galaxy note GT-N7000 logo ,
is there any particular order you have to do to restore ?
Ranjan : i dont think my note boot loop as ive experienced on rocket rom a few times hehe , its just stuck at the black screen with the white Samsung Galaxy note GT-N7000 written on it when i power up
or if im too dumb to solve this , i would send it to repairs but cant find any place nearby , you guys know a place that do that kind of stuff ?
i appreciate the help thanks guys
You shud try to reflash it
Sent from my GT-N7000 using xda premium
dr.ketan said:
You shud try to reflash it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
you mean reflash using odin ?
when i use odin it download well it says no errors and reboot but still stuck , unless there is others ways beside odin
also i wanted to say when my root and cmw went fine i did a back up on it and it worked before , each time i try to restore it in the end at the data it says :
.android_secure.img not found and its bypassing that part
but says its done after , but doesnt boot too
Pull out the battery and replace after 10 seconds, then try flashing different ROM using PC Odin. while flashing do not Tick Re-partition and do not attach pit file.
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
SpecialStar said:
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
Click to expand...
Click to collapse
You Should be more specific
Flashing ANY Stock ROM with PC odin, don't raise counter.
Your reply shud be flashing custom ROM with PC odin counter will raise.
not ANOTHER
Right, sorry forget to mention
So he should just flash a STOCK ROM with Odin
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Balbaroth said:
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Click to expand...
Click to collapse
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
ranjan.alva said:
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
Click to expand...
Click to collapse
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Balbaroth said:
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Click to expand...
Click to collapse
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
did you install any custom ROM on it??
ranjan.alva said:
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
Click to expand...
Click to collapse
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Balbaroth said:
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Click to expand...
Click to collapse
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
ranjan.alva said:
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
Click to expand...
Click to collapse
ok will try LA3 ,
we are talking about this one right ?
N7000XXLA3 --------2.3.6------- 2012 January---N7000OXALA3--------------------Open Europe-----------------------
i found it using Dr.ketan signature
( huge thanks for the tutorial and the quick access to note roms )
im crossing my fingers and will keep you updated
, if by any chance it doesnt work ,and that i have to fix it , can you tell me where they service notes , in canada montreal its not even out yet lol
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Richy99 said:
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Click to expand...
Click to collapse
okay i flashed the la3 rom and still stuck lol darn ill try la4 then ,
it succeeded in odin pc and on the phone still says samsung official
im really out of options i guess , unreal im beginging to think it has others issues
is this place reliable for repairs ? http://repair-my-device.com or any other suggestions i cant find nothing beside that
EDIT : okay i tried the LA4 still doesnt boot up and stuck on the black screen with the samsung galaxy note gt-n7000 unless i go to cwm or download mode odin i cant do anything else ,
i was reading stuff and i was wondering if i jig could help ?
Was on a completely rooted Midnote.
wanted to try rocketrom ics. So went to recovery and flashed v 1.4, did a complete wipe before and after, but after that, the recovery module became unresponsive, so I force rebooted and the phone was stuck on boot screen "Samsung Galaxy Note 7000".
So I used PC odin and tried to flash the KL3 ROM but was stuck at factoryfs.img. Tried LA5 too, but same situation. Kindly help.
I am from Pune, India.
Related
Hi all,
I was on the UK Stock 4.03 + Root....
I was trying to connect to a Blue-tooth Device today and the phone was frozen, so I turned it off....
When I tried to turn it back on...it won't go pass the "Samsang Galaxy Note" screen....(it would restart it self every time it reaches that screen)
I tried flashing it to the 4.0.4 German Stock via Odin...and the problem is still there....
is my phone BRICKED??
Please HELP~~!
THANKS!
Forgot to mentioned that when I was trying to reboot the phone for the first time....I had a USB Stick plugged into the phone...dunno if that was the cause of the problem
You said tried to flash 4.0.4, that is insufficient information
whether it was successfull or not?
do you rememeber wat exactly last msg ?
Did u try to completely remove the battery then reflash again stock ics through odin?
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
Yeah...I did a flash of this Stock ROM "N7000XXLRG" from this page: http://forum.xda-developers.com/showthread.php?t=1424997.
The flash was SUCCESSFUL by Odin. However, When the phone rebooted after the flash the problem is still there (phone keep restarting once it reaches the "Samsung Galaxy Note" screen)
btw.. this is the log of the flash in Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
<ID:0/004> NAND Write Start!!
<ID:0/004> zImage
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Also...when I am trying to get into recovery mode....it shows the pic of the Android bot lying on the ground with a red triangle??
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
Thanks for your reply again....is there a SAFE instruction of how I can flash GB ROM by using Odin?
You meant a STOCK GB or CUSTOM one?
Does it matter if I flash the German one when I was on the UK one originally?
THANKS AGAIN
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ok...downloading now....will let you know the result soon....THANKS
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
THANKS Doc.....by flashing the GB STOCK has solved the problem
How can I avoid this from happening in the future? Because I want to upgrade to ICS again
Final5k said:
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
Click to expand...
Click to collapse
No I didn't....where can I get that Kernel? and do I just flash it in CWM?
cheers for the suggestion
Congrats
It was likely to revive as i said it was seems to be a bootloop rather true brick
Dont worry it was just incidence, n not likely to repeat.
You can flash ics now safely. But first wipe cache and data before flashing ics if you have not perform it still.
Sent from my GT-N7000 using xda premium
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Final5k said:
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Click to expand...
Click to collapse
so....
1. this kernel works with any stock ICS ROM?
2. Does it affect any performances....for example making the phone laggy?
cheers
Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
orcunpakten said:
Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
Click to expand...
Click to collapse
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
happened to me too..
That "firmware encountered an issue" is an indication that the system is corrupted to the point that it cant manage to startup..
I got that problem because of my stupidity.. Plugged my phone to the defective USB port and when I started flashing, I accidentally moved the cable and BAM! Phone is disconnected, and flash failed bigtime..
Your only fix for that if you ask me is do another flash... Try pulling out the battery for 10mins and try to boot into download mode.. That's how i was able to recover my phone from that screen..
I remember that message offering to run emergency recovery using Kies but it is totally useless.. trust me..
Make sure you're plugging in your phone to the USB port DIRECTLY on the motherboard of the computer (the ports at the back) not the ports on the front panel of the case of your computer..
If you're still encountering problems, I believe youre looking at a bricked device and seek more advanced assitance from people here..
SpyderTracks said:
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
usually factory fail.
i did every time fullwipe
Sounds like superbrick, but try flashing stock gb with pc Odin.
Sent from my GT-N7000 using xda premium
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
But i can get download mode and if i install odin ''AbyssNotekernel42CWTouchOriginalLogo'' i get recovery mode...
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
nokiamodeln91 said:
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
Click to expand...
Click to collapse
i try another laptop now... Cuz i remember what i do.
My last rom is stock XXLRK rom. And i tired slowly
i try everything HARDRESET-UPDATA-ALLWIPE but always slowly. And i think maybe i need a GB rom.
and i download XXLA4 everything is good and when i try root XXLA4.
this file: 'CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5'' stock phone.
Every time i install this way.
Wipe Data/Factory Reset
Wipe Cache Partition
Format/cache
Format/system
Format/data
Wipe Dalvik Cache
Wipe Battery Stats
Fix Permissions
This way always be good for me cuz i try this way 100 times.
I use Odin 1.85 and i use everytime u1_02_20110310_emmc_EXT4.pit (NO-RE-PARTITION)
So i think my fault is mistakenly last time i select ''N7000_16GB_Q1_20110914-stock.pit'' instal a ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
I'm tired for try.
I try another pc but result is the same. FAIL FAIL FAIL
N7000XXLA4_N7000OJVKL1_N7000XXLA4_HOME.tar
N7000XXLRL_N7000XXLRK_N7000VD2LR1_HOME.tar
N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar
N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar
N7000XXLRI_N7000OJVLR3_N7000XXLRB_HOME.tar
I'm like a sammy's storage... I try this roms but result is the same.
Where did i wrong? problem is kernel?rom?pit file? ((
where did it fail?
nokiamodeln91 said:
where did it fail?
Click to expand...
Click to collapse
Odin Fail. I think factoryfs.img fail...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why now is the wrong? Thing I did always right way
Done dude.. u r good to go now
Problem is solved
Thank you so much ''nokiamodeln91''
dont do any wipes as of now.. u on ICS and an unsafe kernel
dont forget the thanks button
How did you rectify this nokiamodeln91?
Sent from my GT-N7000 using xda premium
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Nice man, well done.
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Where can I get a copy of this PIT file? My phone is bricked and am only able to get into download mode and not recovery mode.
Hi guys and girls.
I've been frantically searching XDA for the last few hours for a definitive answer, but to no avail, so thought it's about time I just asked!
I have in my possession a Samsung Galaxy S19000, that will only go into download made.
Here's how it happened........
This morning, I was given the phone by my brother in law and asked to root it and upgrade it to a newer/better rom. When it was passed
to me, it was.....
Firmware: 2.2.1
Baseband: 19000XXJY
Kernel: 2.6.32.9
[email protected] #1
Build: FROYO.XXJPY
After a successful root and upgrade, the phone ended up like this...
Firmware: 2.3.7
Baseband: 19000XXJVK
Kernel: 2.6.35.14-g3088622
Build: CyanogenMod-7.2.0-galaxysmtd
The new Rom, as nice as it was, wasnt what he wanted, so he asked me to restore it back to it's stock state. I went into CMW and did a restore, but it failed, and now the phone will only go into download mode.
I've tried flashing a stock rom via Odin, but it got as far as the 'Nand write' stage, then hangs.
Kies doesn't show up the device in 'Emergency firmware recovery' either.
I no all is not lost, so I'm not giving up. Any help will be much appreciated.
:fingers-crossed:
Can you post the whole Odin Log?
Normally this happen when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
Maybe it helps to flash the pit file to repartition.
To add.....
When the phone is off, it displays the 'phone and computer with an explanation mark triangle inbetween symbol', and Kies doesnt recognise it. When I enter download mode, Kies hangs at 'Connecting' for.....well..ever! So atleast I know it's recognised by my PC (ish) and it isn't completely dead :silly:
I had the same thing with the triangle a few months ago.
I just flashed a Stock Firmware with Repartition. Just be sure with Odin that you have ticked the right things Afterwards it worked.
Thankyou for you reply, and sorry for the delay posting back. God damn new user restrictions!!!
KUN1 said:
Can you post the whole Odin Log?
Click to expand...
Click to collapse
Heres what Im getting...
Code:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!
First try it with Repartition. If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
KUN1 said:
First try it with Repartition.
Click to expand...
Click to collapse
You'll have to excuse me, I've never had problems problems before, so I've only had to use the PDA box till now.....
Is that the re-partition tick box, or the re-partition PIT file box??
KUN1 said:
If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
Christ that looks involved doesn't it! I think that be a last resort as it looks like I'll need to clear a day in my diary before I start!
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
KUN1 said:
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
Click to expand...
Click to collapse
SOLVED
I couldnt sleep, so decided to have another bash at getting this phone going again.
Many many thanks to KUN1 for hunting down and PM'ing me the necessary Odin MD5 and PIT files to use for the method he posted above.
:victory:Success:victory:
You've been a life saver sir :good:
haha no problem
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
here the ODIN log for 1.87 but same for 1.85
nokiamodeln91 said:
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
Click to expand...
Click to collapse
Thanks for having a look into this.
So Windows recognizes the following drivers if it is in Download mode
SAMSUNG Mobile USB CDC Composite Device
SAMSUNG Mobile USB Modem
And ODIN 1.87 recognizes the device under ID:COM yellow 0:[com3]
<ID:0/003> Added!!
after START PIT and Bootloader
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Phone does not do anything. :crying:
I assume that the wrong KERNEL is causing this missbehaviour!?
what to do now? Any idea?
Thx 1000times
So how do I first get a new fitting Kernel?
Le_Tifou said:
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Click to expand...
Click to collapse
You would better restock your note.
You will need a rom with four files: .pit , .pda, modem and csc
The rom MUST be made for your phone and you may find it in samfirmware.com.
If your phone can't enter dowload mode, you'll need a USB JIG.
Hope this can help.
After reading the Odin resulst, try to flash only PDA as your error is comming from the PIT file.
Uncheck "repartition"
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Is that the right file: 165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip ??
nokiamodeln91 said:
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Click to expand...
Click to collapse
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Even if you get a whole rom, it's good. Flash with odin without the pit
Le_Tifou said:
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Click to expand...
Click to collapse
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Thanks KERNEL has been changed back to original
lionelia said:
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Click to expand...
Click to collapse
Thanks both of you!!!
Odin 1.87 worked so far. And immediately Windows recognized the phone as GT-I9220 again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9220ZCLPL_I9220ZCLPI_I9220OZHLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I got after disconneting and taking out battery and restart -
got into mode VOL-up + power-on + center key
and made a factory reset as well as deleted cache
Modell: GT-I9220
Android version: 4.0.4
Baseband: I9220ZCLPI
KERNEL: 3.0.15 - ...
Build: IMM76D.ZCLPL
When I unpacked the ZIP file there was an additioal file ss_DL.dll what shall I do with it?
now it works thanks to you!
Great!
Nothing to do with the the dll file. Congrats for a working phone.
Rooting failure
nokiamodeln91 said:
Nothing to do with the the dll file. Congrats for a working phone.
Click to expand...
Click to collapse
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
Hey guys,
Last night I looked at my phone (which had been on charge for a while) and noticed that it was on the first S3 boot screen. So I assumed it had crashed and got stuck whilst rebooting, so I held the power button to reset it.
Problem is, it came back to the same screen, except this time the black background of the image was distorted - lots of red/green/blue dots on it. So I tried again, and it came back even worse... The third time, it settled on a completely distorted image and is now seemingly stuck like that.
The phone isn't booting, so far as I can tell. If I try to boot to recovery, I just see the same screen. If I boot into download mode, it actually works - the screen is no longer corrupt and it responds to button presses. (Although itnerestingly if I continue to hold Home + Vol Down + Power once the download screen appears, then it does distort).
I have tried plugging it into my PC. I don't see it as a MTP device (no suprises there), and ADB can't find it. It is however recognised by odin. I tried flashing a stock rom via odin, but it complained that there was no PIT found. (Which if I understand if something to do with the partitioning of the device.
Any ideas on how to solve this? Should I find a PIT image for my phone and flash that and the ROM together?
For background, my phone is a i9305 and was running paranoid android (4.2, IIRC).
Dont touch pit
First flash stock rom via Odin
JJEgan said:
Dont touch pit
First flash stock rom via Odin
Click to expand...
Click to collapse
When I try that, I get the following error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXALI5_I9305EVRALI5_I9305BVALI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That was why I was wondering about the PIT file.
I have also added some pictures (they're pretty low resolution, unfortunately). The first is what I see when I try to boot normally - lots of white and black bands (the yellow and purple you can see is just an artefact of my crappy webcam). The second image is download mode, where I continued to hold down the buttons after it loaded, causing it to reload with the corrupted image (again, this is a bit distorted by the webcam - the text and image aren't blurred).
no access to system and recovery,i doubt theonly way is download mode.just try an stock rom with pit files,agree that the issue have something to with the partition.if you have backup the whole system,even flash a new rom,youdata will be back easy and soon ,so nothing to worried and no way else to go,good luck.
Sent from my GT-I9305
As pit breaks more phones than it fixes its not recommended .
But your phone has no pit so you you have choices .
Warranty void so it would have to be a service repair .
Or you can try flashing a pit file yourself if it fails you will need to buy a new motherboard .
I´ve had the same Problem on my S1.
I Flashed a whole Package from Samsung Stock Firmware ( PIT MODEM PDA ) in Odin.
After that it worked again, i´ve needed some try´s but after that everythin was normal.
Darkangel 142
Darkangel142 said:
I´ve had the same Problem on my S1.
I Flashed a whole Package from Samsung Stock Firmware ( PIT MODEM PDA ) in Odin.
After that it worked again, i´ve needed some try´s but after that everythin was normal.
Darkangel 142
Click to expand...
Click to collapse
Do you mean specifically that you had the same error in odin, or that your S1 had the distorted screen too?
Well, I tried flashing the i9305 pit file and had no luck. The re-partitioning failed to start at all, so it didn't ruin the motherboard, at least.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXALI5_I9305EVRALI5_I9305BVALI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Back to orange/samsung it is!
Thanks for your suggestions/help, everyone.
Any joy?
Hi,
I've posted about the same problem. Completely stuck on who to deal with and can fix it How weird to have happened so close and exactly same with black screen then stuck on white, Wonder if others are out there.
Link: http://forum.xda-developers.com/showthread.php?t=2526821
stuck screen
i have the same problem with my s3 and i couldn't do the download mode. im planning to restore on stock rom but i don't know how to fix this issues.
thanks,
einjelhart said:
i have the same problem with my s3 and i couldn't do the download mode. im planning to restore on stock rom but i don't know how to fix this issues.
thanks,
Click to expand...
Click to collapse
Hi mate,
If you can't get in to Download Mode because of boot loop:
Try forcing it by holding all 3 buttons until it turns off, should come up.
Failing that, you can eBay Galaxy USB Jig that plugs in and forces Download Mode.
If you can get to Download Mode, I have written a solution to flash just the ROM.
You can read my solution by following the Link above your post
Have a great day!
-Shaz
Same problem with my s3 ,but Odin doesn't recognise my device ,please help
Debanshu bebartta said:
Same problem with my s3 ,but Odin doesn't recognise my device ,please help
Click to expand...
Click to collapse
I had these prob before; device not recognize in odin, distortion screen with colorful line, stuck at boot logo & splash screen.. I tried flash lot of thing possible to fix it but all fail. Suddenly everything working fine after changing new battery.. Lol. Or maybe im just lucky.
Sent from my GT-I9305 using XDA-Developers mobile app