Related
I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
Before I begin I know I'll be slammed for loading an incompatible ROM for my phone, dumb on my part, especially without a clockwork backup.
I was running a leaked 2.2 rooted, which when loaded removed clockwork so i could no longer take backups. I then followed pathikshah.com/blog/install-android-2-3-3-gingerbread-on-samsung-galaxy-s/ which I know says don't use for captivate, but I didn't read that.
I am now running 2.3.3 but my back button is not operational, it flashes when pressed as normal but completes no action. My home button however acts as my back button. My menu and search buttons are normal.
I do not have the 3 button combo capability as i once had before, the screen just stays black and the buttons light up and it stays like that till i battery pull.
Other than that and some crazy screen distortion of colors when it boots it runs fine from what I can tell. But I'd like to at some point get back to a stable/compatible ROM.
Please let me know how I can somehow get to stock or a stable ROM. Thanks in advance.
darkknight2k3 said:
Before I begin I know I'll be slammed for loading an incompatible ROM for my phone, dumb on my part, especially without a clockwork backup.
I was running a leaked 2.2 rooted, which when loaded removed clockwork so i could no longer take backups. I then followed pathikshah.com/blog/install-android-2-3-3-gingerbread-on-samsung-galaxy-s/ which I know says don't use for captivate, but I didn't read that.
I am now running 2.3.3 but my back button is not operational, it flashes when pressed as normal but completes no action. My home button however acts as my back button. My menu and search buttons are normal.
I do not have the 3 button combo capability as i once had before, the screen just stays black and the buttons light up and it stays like that till i battery pull.
Other than that and some crazy screen distortion of colors when it boots it runs fine from what I can tell. But I'd like to at some point get back to a stable/compatible ROM.
Please let me know how I can somehow get to stock or a stable ROM. Thanks in advance.
Click to expand...
Click to collapse
You only option may be to buy or make a jig to force download mode then you can flash the stock ROM using Odin.
erm, im not 100 % sure because i havent tried this yet... but if i read it correctly, your rom is still (somewhat) operational. So try installing rom manager, flash cwm, then reboot into recovery.
From that, you can install the 3 button fix. Then i would suggest going into download mode, flash back to stock 2.2 using the odin back to stock. Then you can begin the process of installing 2.3.3
Also, the problem with yours is, you installed the i9000 version which for some reason has that button mapping problem. There are 2 versions of 2.3.3 on this forum (Cyanogen Mod 7 and MIUI). You can use either one of those, the buttons work perfectly and i dont see anything wrong with it.
Oh and, as the above person said, if my method doesnt work, you can either buy a jig, or build one yourself. There are threads in this forum about both . Also, please refrain from using I9000 stuff unless you fully know what it does. Im not much of a modder myself which is why i only download stuff from the captivate dev section.
Hope i helped
P.S... youd only be slammed if you didnt know what your problem was and blamed someone else for it. This forum is to help people
Try volume up and power, or volume down and power
Miui
This video helped me to go to downloading mode on my i9000 that had its 3 buttons bug:
youtube.com/watch?v=D0aoabVtPJ8&feature=feedlik
you need to buy a 301k or 300k resistor and it will work for 100%
adb reboot download!
also see if odin sees the phone when the screen is black, if you say buttons light up the phone is on, could be a problem with the image used in download mode. i once had this happen after a bad crash on the old manhatten project kernel. the splash screen images got corupted and it wouldn't boot passed a messed up lookin splash screen. thought i fried the video chip and went to flash back to stock. the screen stayed black with the 2 button + usb cable combo but odin showed the yellow box. so i started flashing and halfwat through the little guy with the shovel poped up. i was in download mode but my screen was black do to corrupted splash screens. phone took a flash and went back to normal.
success
Thank you all for your help. I ended up building a jig out of 3 100k and a 1k resistor and an igo adapter. Tore it apart and built like jig and like every end to a Macguyver episode the crazy contraption worked like a charm. Funny thing is I loaded stock 2.2 ROM, which in turn bricked the phone. I got the phone ! computer logo. So I used the jig again and got it flashed to stock and up from there to Cyanogenmod 2.3.3.
Thanks again everyone.
OK. . .so I was trying to follow the steps for Cog v5, and while flashing the beta2 kernel I screwed something up. I was starting from fresh new Froyo 2.2 straight out of the box. Now, I can get to Download on the device, but the PC (Win7x64)will not recognize my device in Download. When the phone tries to boot (NOT connected to USB), it hits the AT&T splash screen and then the screen is just a jumbled mess of colorful static. this loop continues on forever. If I connect the USB while this is happening, the PC and Odin briefly recognize the device (but not long enough to Start or do a Master Clear. I've read MANY other threads and I'm hoping that the statements others have made about "if you can see AT&T screen, you can unbrick", "if you can get to Download, you can unbrick".
TIA for any help
brreg070 said:
OK. . .so I was trying to follow the steps for Cog v5, and while flashing the beta2 kernel I screwed something up. I was starting from fresh new Froyo 2.2 straight out of the box. Now, I can get to Download on the device, but the PC (Win7x64)will not recognize my device in Download. When the phone tries to boot (NOT connected to USB), it hits the AT&T splash screen and then the screen is just a jumbled mess of colorful static. this loop continues on forever. If I connect the USB while this is happening, the PC and Odin briefly recognize the device (but not long enough to Start or do a Master Clear. I've read MANY other threads and I'm hoping that the statements others have made about "if you can see AT&T screen, you can unbrick", "if you can get to Download, you can unbrick".
TIA for any help
Click to expand...
Click to collapse
Sounds like you either have the 2.2 bootloaders still and the rom was a 2.3 version. I have seen comments by others about it exactly and they hadn't flashed the gingerbread 2.3 bootloaders. You may have two issues also, 1 being still having 2.2 bootloaders and 2 that you now have the 2.3 kernel but NO ROM yet. Just keep trying to first get back to the 2.2 bootloaders safely and start all over. DO NOT FLASH ANYTHING THAT HAS THE THREE BUTTON FIX. YOU MAY HAVE A PERMENENT BRICK IF YOU HAVE THE GINGERBREAD (I9000) BOOTLOADERS. Flash with the 2.1 Odin 1CLICK that will replace the TWO BOOTLOADERS correctly. Then you can use DGs 1Click gingerbread for the ATT Gingerbread bootloaders. This will allow you to then install any I897 gingerbread rom, I897 froyo rom, I9000 Gingerbread rom.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted
See if you can still get in to Download mode. If you can, you will be able to return to stock and try again.
1.) Start Odin JF6 One-Click
2.) Attach USB cord to the most stable port on your PC, make SURE you won't accidentally pull it out!
3.) While holding down VOL UP + VOL DOWN buttons at the same time, plug in the USB cord
If you see the android digging, you are golden. Odin should fill in the one box with a yellow message, now click Start, and pat yourself on the back for purchasing one of the most brick-proof phones around. If this does NOT work, try AGAIN, but this time pull the battery out - then plug in the USB - then hold VOL UP + DOWN - THEN pop battery back in. Keep in mind that button combo is for 2.1/2.2 bootloaders. If you managed to get a 2.3 bootloader on there, the button combo is just the VOL DOWN button by itself. Keep in mind, Odin can be VERY picky, I need to restart it in between every attempt, so make sure you are closing and restarting Odin in between tries!
If none of these work, chances are your phone is bricked, but there is STILL the option of JTAG - send connextion2005 a PM and see if it would help.
I appreciate the replies! I was getting desparate because I was down the beach with only my laptop. Just got back and tried connecting to my desktop and Bingo!, Odin recognized my phone! I don't know why, but the USBs (all 3 of them) on my laptop wouldn't work. I've got a functioning phone again. wheeewww
Thanks again for the help.
Before Jtag try to make or buy a Jig. It will force your phone in to download mode. Even if the screen doesn't say Download mode have Odin open just in case. A easy way to make a Jig is here. You can probably buy one for about $10 else where but this will probably be faster.
Hello!
I know that I should have done a lot more research before jumping in but here is what happened. I have also looked everywhere in the captivate forums with no luck. I upgraded to stock Gingerbread from Froyo a while back, yesterday I decided that I wanted to root, which I accomplished with Odin. The rooting went just fine, after that I wanted to flash ICS Slim onto my phone, which I soon realized I needed clockworkmod recovery for. After research found out that it doesn't work using ROM manager so I followed a guide to install it and here is where things went sour, following the guide I installed Hardcore’s SpeedMod Kernel it rebooted and it started normally, passing the AT&T bootscreen but now I am completely stuck on the screen after saying "GALAXY S SGH-l897" and on bottom "SAMSUNG". I am able to access the downloading screen and I just do not want to do anymore damage than I have already.
TL;DR: I'm stuck on boot after installing Hardcore's speedmod kernal, able to get on download screen, don't want to do anymore damage. Long story short, what can I do to repair my phone to a usable state?
Google "Flash ClockworkMod Recovery to Samsung Captivate" 3rd link down to see the guide that I used.
Thank you for taking the time to help!
I think hardcore speed mod kernel is for froyo/eclair that's why you're boot looping, but clockwork mod should work. Try using the three button combo to get into recovery and flash whatever captivate ICS ROM you chose, assuming you have the file in your internal SD.
Sent from my SGH-I897 using XDA
thanks for the reply, unfortunately I don't have any ROM on my internal at all, is there a way to flash a ROM from odin or another software? Or do I have to use the clockworkmod recovery to flash it on?
You can mount USB storage from recovery, so transfer the ROM to your sd card that way
Sent from my ICS Samsung Captivate
Edit: removed cause you beat me to it
Yes, there is a list of stock Odin one click packages in the development forum stickies.
Sent from my SGH-I897 using XDA
I am trying to mount the USB Mass Storage from ClockworkMod Recovery v2.5.1.0, but nothing will appear onto my computer, if I could get this to mount could I flash 2.3.5 using Kies Mini? Would the wipe data/factory reset help me here?
Try reinstalling samsung drivers to get your phone recognized. Since you're on 2.3.5 already, Kies will not let you re-download because it assumes you're on the latest firmware already. Use the Odin one click package. Or heimdall one click.
Don't rush. If you're still unsure keep searching. Read thoroughly so errors won't happen
Sent from my SGH-I897 using XDA
No wiping will not help you lol. Its better to flash back to 2.3.5 and start fresh.
Sent from my SGH-I897 using XDA
Thanks for all of the help! I was finally able to mount the phone and transfer the rom, installed it after with little trouble.
Sent from my SGH-I897 using XDA
I've got the same problem with my phone, but I arrived there thru different means.. I used an app called Kernel Manager Light, and believe I tried flashing something called like Fastloader, or Fast boot loader.. something.. anyways, looked good for a minute, while it flashed it, then rebooted my phone & since then, it doesn't load past a screen that reads "GALAXY S" then smaller and below it "SGH-I897".. then across the bottom, "SAMSUNG".. Totally stuck there, for DAYS. I've been reading these forums for what seems like ever, and this is the closest scenario I've found to my own situation.
I can't get my phone into download mode no matter what I do. I can't get into it thru ADB. All I get is that screen.
In ADB, when I type C:/ADB devices, it will sometimes recognize my device (tho more often than not it won't) and even whwn it does, as soon as I try to access my phone thru ADB, it just freezes up too.. I hit enter, and the cursor drops down to the next line, but nothing ever happens from there.
Someone please help..?
JH480 said:
I've got the same problem with my phone, but I arrived there thru different means.. I used an app called Kernel Manager Light, and believe I tried flashing something called like Fastloader, or Fast boot loader.. something.. anyways, looked good for a minute, while it flashed it, then rebooted my phone & since then, it doesn't load past a screen that reads "GALAXY S" then smaller and below it "SGH-I897".. then across the bottom, "SAMSUNG".. Totally stuck there, for DAYS. I've been reading these forums for what seems like ever, and this is the closest scenario I've found to my own situation.
I can't get my phone into download mode no matter what I do. I can't get into it thru ADB. All I get is that screen.
In ADB, when I type C:/ADB devices, it will sometimes recognize my device (tho more often than not it won't) and even whwn it does, as soon as I try to access my phone thru ADB, it just freezes up too.. I hit enter, and the cursor drops down to the next line, but nothing ever happens from there.
Someone please help..?
Click to expand...
Click to collapse
Might want to get a $5.00 jig its saved my ass whenever I brick
Sent From My ICS Cappy Using Tapatalk 2
Stuck on bootscreen
!!! HELP !!! I'm very wet behind the ears when it comes to this!!! HENSE my username. this started after connecting my cap. to a pc with intentions of exporting some pics. that initial (1st) and Only pc notification about detecting a usb device, my cousin sitting down at the monitor clicked outside the bubble message. Now from this point on which was several attempts i would get could recognize device msg. I did not know this was gonna be the results, i can actually remember noticable gliches and flaws progressively worse and worse. icons looking like they had a bulb burning out, awful lag in dialer and or any commands. I know now after reading similar posts my attempts to back-up,recover, i did several restore sessions,wiped data & system in a last ditch effort to get my phone back! i was on the road out of my state. not a comforting situation. I'D REALLY APPRECIATE THE HELP! I'M LEARNING AS I CRAWL ALONG HERE, WITH THAT BEING SAID I'M NOT FAMILIAR WITH ALOT OF THE LINGO! symbols , abbreviations , etc:crying:
Ur post is confusing...
What firmware are u on -- Eclair, Froyo, Gingerbread ??
Did u get ur pics copied off of the phone and to the pc. Under the Settings in ur phone is a USB connection setting to select for when u want to transfer stuff to ur pc.
If ur phone is still jacked up from the multiple backup and restores u did, then u may just have to do a Factory Reset from the Settings menu to get things back to normal...but do understand that that means all ur pics and other stuff will get erased, etc.
If the Factory Reset doesn't work, then I would say get into download mode and flash a Stock firmware (GB 2.3.5 i897ucKK4 being the latest official) and then proceed forward from there however u want.
See the stickied threads in the Q &A and Dev forums for help with flashin to Stock and Dev Roms.
Sent from my SGH-I897 using xda premium
hey all, i've had my captivate for about two years now, and for a while i used cognition, then for the last year i've been using firefly. firefly has completely destroyed my phone's speed and responsiveness, and i needed to clean everything off and start with a minimalist ROM. so i picked slimICS.
i'm still very hazy on the details and terminology of flashing ROMs, but i got two to work (i remember using one-click root thing in 2010, and then in 2011 i flashed firefly through clockwork) so i figured it shouldn't be a problem to install slim, which i figured would be my last ROM until next year, when i'd get a new phone.
so i backed up my stuff, tried to get into recovery mode with the 3 buttons (didn't work, unsurprising since it didn't work last year either), took out my SIM, went to CWM, and selected the flash rom option. this restarted the phone and sent it into recovery mode--except it was the stock recovery, and i couldn't select anything because i think firefly made the phone think it was the i9000 model from canada, instead of the i897 captivate, so it assumed i had a physical "ok" button on my phone (which i obviously do not). i tried the power button, the various capacitive buttons on the bottom, nothing would select any of the options, so i just took out the battery and put it back in. the phone immediately booted into the CWM recovery menu, in which i selected flash ROM, and scrolled down to choose slimICS.
i let it do its thing for a while, it jumped between the AT&T white logo screen and a screen with scrolling text for like 5-10 minutes, then just stayed on the AT&T logo screen for another ten minutes. i should have left it for maybe a half hour to be sure, but i figured the install failed. i couldn't get out of this so i pulled the batttery. and now the phone is bricked (soft i hope). if i hold the power button it goes to the AT&T white logo, flashes briefly for a half-second and goes back to the screen, then stays there indefinitely. no button combinations seem to work. does anyone have any suggestions?
thanks!
Since you backed everything up, I'd suggest flashing a stock rom via Odin or Heimdall to clean everything up before moving forwards.
You can flash a non-bootloader one to be safe, or if you want to make sure you can flash anything, flash a package with Gingerbread bootloaders.
jmtheiss said:
Since you backed everything up, I'd suggest flashing a stock rom via Odin or Heimdall to clean everything up before moving forwards.
You can flash a non-bootloader one to be safe, or if you want to make sure you can flash anything, flash a package with Gingerbread bootloaders.
Click to expand...
Click to collapse
how do i flash anything in my phone's current condition? it doesn't turn on fully. it's stuck at the white AT&T logo.
Turn it completely off (pull the battery, if necessary), then hold V+ and V-, and insert a USB cable. That should put it in download mode. Once you're there, you can flash a stock rom (There's a stick with those roms in the development section).
jmtheiss said:
Turn it completely off (pull the battery, if necessary), then hold V+ and V-, and insert a USB cable. That should put it in download mode. Once you're there, you can flash a stock rom (There's a stick with those roms in the development section).
Click to expand...
Click to collapse
doesn't work. as i mentioned in the OP, i can't get into download or recovery mode or whatever. these button combos have never ever worked with this phone. for example, holding + and - and inserting a cable with ODIN open has never done anything. that's why i used clockwork.
Sounds like u r gonna need a Jig. If u are on a pc, click on my sig link below and there u will find a link on how to make a jig and/or where to buy one.
4-2ndtwin said:
Sounds like u r gonna need a Jig. If u are on a pc, click on my sig link below and there u will find a link on how to make a jig and/or where to buy one.
Click to expand...
Click to collapse
is that guaranteed to work? or is it most likely? or is it unlikely at this point?
The jigs that I have made myself in the past and as well the professional made ones that I have purchased have always worked to get me into download mode.
The jig is worth a try, I suggest you should
if I'm reading the op right, and if memory serves firefly was an I9000 build and button combos are different. My suggestion would get the Odin kk4 one click with repartition and WITH boot loaders from 4-2ndtwin's sig links, open that and while powered off and holding just the vol- button insert the USB that should do the trick. I9000 builds use different boot loaders with different button combos. Since you will be flashing a boot loader package be aware this is when you can truly hard brick your device. Be sure you have a good connection and cable before starting. If you still can't get into download mode I can +1 on the jig. The jig and 4-2ndtwins one click has saved my bacon more than once.
ok so i bought the jig, and good news: it gets me into download mode! yay!
problem: i don't know where to go from here. i've tried the following:
A. after getting into download mode, i followed the ODIN method here: http://forum.xda-developers.com/showthread.php?t=1350266, meaning i flashed the gingerbread bootloader update (nothing happened to the phone, which made me confused when i got to step 7., because i was STILL IN download mode), then flashed the speedmod kernel (which reset the phone, but it just got stuck in the "SAMSUNG CAPTIVATE i-897" white text on black screen, forever. i had to do a battery pull. turning on the phone goes to the same screen and then it freezes. trying to hold all three buttons to go into recovery mode alternates between that screen and the white AT&T screen, actually alternates, forever if i let it.
B. after that failed, i tried using the 2.2 Heimdall one-click (http://forum.xda-developers.com/showthread.php?t=1266172) but the file, when run, says
Code:
ERROR: Drivers Not Found
Installing drivers
but i still followed the instructions (except the instructions say "Install driver" but the actual button is "Replace driver"?) in any case, this does nothing. and then checking off "Flash bootloaders" and doing it again does nothing. the phone remains in download mode.
C. so i wanted to try one-click downloader http://forum.xda-developers.com/showthread.php?t=731989, but nothing pops up on the ODIN window when i plug my phone in. i can't even do anything.
please help!
please, does nobody know what to do?
Take a look at the "Captivate Connection Issues" thread for some more things to try. At this point, it sounds like you need to clear all the phone drivers off of your machine and reinstall them.
jmtheiss said:
Take a look at the "Captivate Connection Issues" thread for some more things to try. At this point, it sounds like you need to clear all the phone drivers off of your machine and reinstall them.
Click to expand...
Click to collapse
thanks, that worked! (it was my laptop that was the source of the connection issues i think; i tried all that stuff in the thread, but when i switched to the desktop, all of a sudden ODIN recognizes the phone!) i got my phone to flash ODIN one-click. so now i'm back to stock 2.1 eclair.
however, much to my dismay, i still can't get into recovery mode to (re-) root. the three button combo still does the weird flashing thing, where the white AT&T logo shows up, then the screen goes to black, then the AT&T logo, then black... ad infinitum. how do i either 1) enter recovery, or 2) re-root the phone + get a nice, lean, fast, modern ROM on it without going into recovery?
so far this thread has helped me unbrick the phone, now all i need is to update it from stock!
spacenegroes said:
thanks, that worked! (it was my laptop that was the source of the connection issues i think; i tried all that stuff in the thread, but when i switched to the desktop, all of a sudden ODIN recognizes the phone!) i got my phone to flash ODIN one-click. so now i'm back to stock 2.1 eclair.
however, much to my dismay, i still can't get into recovery mode to (re-) root. the three button combo still does the weird flashing thing, where the white AT&T logo shows up, then the screen goes to black, then the AT&T logo, then black... ad infinitum. how do i either 1) enter recovery, or 2) re-root the phone + get a nice, lean, fast, modern ROM on it without going into recovery?
so far this thread has helped me unbrick the phone, now all i need is to update it from stock!
Click to expand...
Click to collapse
I could be wrong but when you do the 3 button combo it sounds like you are continually holding the buttons which will cause it to keep looping like you describe. Starting with your phone off hold down all three buttons. The phone will show the white ATT screen. Then if you had a custom kernel it would show the kernel splash screen, in your case you said it just goes black which is fine too. Then you will of course get the white ATT screen again. As soon as you see the white ATT screen again release all the buttons and that should boot it into recovery.
m1batt1 said:
I could be wrong but when you do the 3 button combo it sounds like you are continually holding the buttons which will cause it to keep looping like you describe. Starting with your phone off hold down all three buttons. The phone will show the white ATT screen. Then if you had a custom kernel it would show the kernel splash screen, in your case you said it just goes black which is fine too. Then you will of course get the white ATT screen again. As soon as you see the white ATT screen again release all the buttons and that should boot it into recovery.
Click to expand...
Click to collapse
i tried various durations of holding the buttons. none worked. 2nd AT&T logo, nope. 1st black screen, nope. 1st AT&T logo, nope.
Your gonna have to get ADB set up on your pc. Then... "adb reboot recovery" will get u into recovery mode.
Sent from my SGH-I897 using xda premium