Related
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/
I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.
ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.
andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help
Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?
You should be on rooted ICS. Then you flash Criskelos rom from CWM
ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!
Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same
Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.
I fear i may have bricked my phone...
I was trying to create a custom ROM, set the ROM to wipe data. After i installed the ROM via CWM i got stuck in a boot loop.
I am able to boot into CWM as well as download mode.
Things I've tried:
1) Flashing stock ROM - still boot loop after doing this. It also asks to install an un-trusted package after flashing, not sure what this is.
2) Flash PARAM_I8190.tar.md5 - Still boot loop
3) Restore from backup - Gives me an error "Error while restoring /data!"
I've wiped data, cache, everything... but the boot loop persists.
Any assistance would be greatly appreciated.
have you tried installing pit file with odin
david32*2010 said:
have you tried installing pit file with odin
Click to expand...
Click to collapse
Hey, no i haven't tried that. I remember saving a pit file a while back but can't find it at the moment.
Is there any other way to get one?
Are they device specific?
Thanks,
scabs
there is one on here somewhere
david32*2010 said:
there is one on here somewhere
Click to expand...
Click to collapse
Yeah i found it thanks, do i have to flash the pit file along with the stock ROM?
with stock rom or kernal
Hmmm, okay I've flashed the PIT file at the same time as stock ROM, and still it's stuck in a loop
Okay this is sorted, i flashed stock recovery then re-flashed firmware.
Thanks David for you assistance.
Hello experts!
Before gifting my Galaxy Tab 8.9 (p7300) I wanted to fully erase my user data and files and flash a stock rom back, so I formatted it in CWM recovery mode.
After that I can only use download mode. When starting with power+volumedown I get two choices: but the recovery mode won't enter (when I press volumeup it blinks fast and do not enter).
The only communication I get to the tablet is with Odin in download mode, and nothing else.
Since then I have made many tryouts with files found on the web: flash pit file, bootloader, cwm recovery, stock recovery and there was no result at all.
I'm really sorry if the answer is in another thread, but I haven't found any solution after 3 days searching the we.
If you solve my problem, you'll get $20. Please help me, I'm deseperate.
Thanks a lot!
Renan
Do you have adb access? If so, can you copy a recovery image to the root directory of the sdcard and flash it via adb?
upconvert said:
Do you have adb access? If so, can you copy a recovery image to the root directory of the sdcard and flash it via adb?
Click to expand...
Click to collapse
I don't have access, unfortunately. Would I be able to flash it in download mode, anyway?
I'm downloading adt-bundle to get access to adb.
renancarlos said:
I don't have access, unfortunately. Would I be able to flash it in download mode, anyway?
I'm downloading adt-bundle to get access to adb.
Click to expand...
Click to collapse
Ok, so what is the problem ???
can't you just flash stock ROM through Odin ??
if so and you're searching for stock Odin ROM
THEN HERE IS THE LINK
omarainea said:
Ok, so what is the problem ???
can't you just flash stock ROM through Odin ??
if so and you're searching for stock Odin ROM
THEN HERE IS THE LINK
I have a stock ROM and CM9 here, but they're all in .zip format, suitable to flash in recovery mode, which I cannot enter.
I couldn't find any ROM in .tar or .md5 format as hotfile server is out, and I don't see how I could flash a ROM with ODIN in .zip format. Is it possible?
Click to expand...
Click to collapse
renancarlos said:
I have a stock ROM and CM9 here, but they're all in .zip format, suitable to flash in recovery mode, which I cannot enter.
I couldn't find any ROM in .tar or .md5 format as hotfile server is out, and I don't see how I could flash a ROM with ODIN in .zip format. Is it possible?
Click to expand...
Click to collapse
Yes I am well aware of that,
the link I gave you in the previous post is for Dev-Host mirror
for a Tar file to flash through Odin
but it is compressed in ZIP format
so you'll have to download it and unzip it using Winrar or 7-Zip
or any other similar Pc program
then you'll get these file :
P7300XXLQI_P7300XXLQ6_P7300GBLMP2_HOME.tar.md5
SS_DL.dll
ignore the .dll file and flash the tar.md5 file through odin and everything will be fine :fingers-crossed:
HERE IS THE LINK AGAIN
Oh and by the way you can't flash a Zip file through Odin
Solved
omarainea said:
Yes I am well aware of that,
the link I gave you in the previous post is for Dev-Host mirror
for a Tar file to flash through Odin
but it is compressed in ZIP format
so you'll have to download it and unzip it using Winrar or 7-Zip
or any other similar Pc program
then you'll get these file :
P7300XXLQI_P7300XXLQ6_P7300GBLMP2_HOME.tar.md5
SS_DL.dll
ignore the .dll file and flash the tar.md5 file through odin and everything will be fine :fingers-crossed:
HERE IS THE LINK AGAIN
Oh and by the way you can't flash a Zip file through Odin
Click to expand...
Click to collapse
It works!
All I needed as really a flashable ROM through Odin. After that I flashed CWM and custo ROM after that. Everything is working now.
Thanks a lot omarainea for the help and support!
Hello XDA members and devs. I have stumbled upon an issue that seems to be close to un-fixable. I have the SM-N910T obviously. I am on DOK2, every rom Touch Wiz and Cyanogenmod flashed correctly a couple of months ago. Now the only things I can flash are DOK2 stock firmware via ODIN, and then I can successfully flash TWRP 2.8.7.0, the only ROM I can flash is Maximum Overdrive 4.0.1 +(all upper updates.) I got a hold of Max OD dev and he said it's because of the 3 mount lines he added to the top of his updater-script. So I added those lines to updater-scripts of other roms and none worked. Some other roms have many other mount points and important lines of code in the updater-script that should not be removed or edited. I want to go back to Cyanogenmod, and others either 12.1 nightlies, or the new CM Remix 13.0 which worked before all the others stopped working at the same time.
Yes I also tried this.
Quote:
Originally Posted by sudoBacon
I tried before. Doesnt work onlky DOK2 or maximum ods 4.0.1 + no other roms
After you flash D0K2 firmware - Use the stock Recovery and Factory Reset - That will get you out of the bootloop - Just remember that your internal storage will be wiped!
I also get the same issue after attempting to downgrade which always fails. Used to be able to downgrade and upgrade firmware's as well, now I cant. I got the dev of Max OD rom to pull a DOK2 pit file even flashing that does not fix my issue. I also posted on Reddit, so I will copy and paste this post.
Reddit Post.
I have a T-Mobile Note 4 was working fine for a long time flashed many ROM's multiple times over and over again never had a problem until I flashed DOK2 I assume. With ODIN. I did flash to stock from COD6 to DOK2 can't seem to downgrade back to COD6 with ODIN get error cant downgrade note 4 SW REV CHECK FAIL : [aboot]Fused2 > Binary 1 [1] eMMC write fail : ABOOT , that appears on Download mode. Then every time I install TWRP I try to install a ROM from OTG usb or ext sd and nothing flashes, rom files work used them before. I can only seem to install DOK2 and can't downgrade or flash other roms. I need help so I can flash other roms. Yes I tried flash stock DOK2 and boot stock recovery then clearing cache and factory reset, to downgrade to COD6 still failing and can't install other roms. every time i try to flash version lower then DOK2 using odin get this error ; SW REV CHECK FAIL : [aboot]Fused2 > Binary 1 [1] eMMC write fail : ABOOT
At one point I installed CWM trlltexx or something like that through TWRP, and did format and all of that. But after that went back to stock flashed TWRP 2.8.7.0 because couldn't flash roms with CWM because the roms thought I was on trltexx. Formatted all partitions with CWM. Anyways tried to get back to Cyanogenmod and or Tekxodus and other roms all fail. Minus Maximum Overdrives 4.0.1.
The first 3 lines that Overdrive mentioned that must make my roms flash able are.
HTML:
run_program("/sbin/busybox", "mount", "/system");
run_program("/sbin/busybox", "mount", "/cache");
run_program("/sbin/busybox", "mount", "/data");
Anyways please contact me on Google+ Hangouts or respond here if you know how to fix my issue also have Skype but PM me for that info. Add Bacon Seeds first and last name to Google + Hangouts that G+ Hangouts email is [email protected] . I am experienced in compiling roms extracting, de compiling as well. Life on my Note 4 without some Cyanogenmod had been technologically heartbreaking. I like flashing multiple roms and swapping back and forth. Now I cant even test others stuck on Max OD which is a good and awesome rom but sometimes get tired of Touch Wiz.
I would install the ROM you can, then dirty flash an aosp ROM, then try to flash the ROM you want.
therealjwkware said:
I would install the ROM you can, then dirty flash an aosp ROM, then try to flash the ROM you want.
Click to expand...
Click to collapse
I'll give this a shot but I seriously doubt this will work if other methods didn't.
sudoBacon said:
I'll give this a shot but I seriously doubt this will work if other methods didn't.
Click to expand...
Click to collapse
Use Kies to recover your phone. It should be able to fit any issues with partitions etc.
Odd how using the PIT file does not fix this issue. It's literally setting up your phone's partition table all over again and it isn't working. Also, on DOK2's bootloader, it is impossible to rollback bootloader. I tried going from DOK2 -> ANIH (Kitkat original) and it didn't work. You can still run older ROMs, just not the older bootloader. That's why you're getting the 'Binary 2 > Fused 1' message.
-
By the way, you should be using ODIN3.10.7. It is the latest version. Load up the full stock DOK2 firmware (I suggest downloading using SamFirm -- make sure to check Binary Nature for a full firmware), follow this guide:
http://forum.xda-developers.com/showthread.php?t=2610757
They used a PIT and Stock to fully wipe, with the exception in this case being that this is 5.1.1 and not 4.4.4
ShrekOpher said:
Use Kies to recover your phone. It should be able to fit any issues with partitions etc.
Click to expand...
Click to collapse
I tried that and now after doing factory reset in the stock firmware I can not even flash Maximum OD only DOK2 via odin.
sudoBacon said:
I tried that and now after doing factory reset in the stock firmware I can not even flash Maximum OD only DOK2 via odin.
Click to expand...
Click to collapse
do you have a working DOK2 stock firmware running on your phone. Once you upgrade to DOK2 you can only flash ROMs based on 5.1.1 or ROMs that include a kernel. If you want to flash a ROM based on 5.0.1 you will need to flash either the Emotion Kernel or the Beast mode kernel as well before you reboot the device.
If you have Stock TW firmware running and you have TWRP installed your phone should be fixed. As long as you use compatible ROMs with it.
ShrekOpher said:
do you have a working DOK2 stock firmware running on your phone. Once you upgrade to DOK2 you can only flash ROMs based on 5.1.1 or ROMs that include a kernel. If you want to flash a ROM based on 5.0.1 you will need to flash either the Emotion Kernel or the Beast mode kernel as well before you reboot the device.
If you have Stock TW firmware running and you have TWRP installed your phone should be fixed. As long as you use compatible ROMs with it.
Click to expand...
Click to collapse
Still didn't work.
Edit : Now i cant seem to install any rom nor Max OD. only DOK2 via odin. TWRP log says
E:Mount: Unable to find partition for path /sdcard
E:UnMount: Unable to find partition for path /sdcard
E:Mount: Unable to find partition for path /sdcard
sudoBacon said:
Still didn't work.
Edit : Now i cant seem to install any rom nor Max OD. only DOK2 via odin. TWRP log says
E:Mount: Unable to find partition for path /sdcard
E:UnMount: Unable to find partition for path /sdcard
E:Mount: Unable to find partition for path /sdcard
Click to expand...
Click to collapse
Looks like you corrupted your partitions. You might need to flash the pit file to fix it. I think there is a thread related to that somewhere.
Request thread closed, resolved!
Steps taken not in any order.
Find a legit us TRLTE pit file. Message me for the TRLTE pit file or I'll make a separate thread for it.
Flash DOK2 stock firmware + proper pit file and have re-partition checked, along with flash BL and EFS clear.
Format ext SD card.
Downloaded the roms onto the formatted SD card.
Flash the latest TWRP recovery
Wipe all not including system x3 times.
Go to Wipe and then Format, check system format system type Yes
Go to install select your ROM.
Then select your GApps and custom kernel whatever else you want.
You might have to do the stock flashing and wiping and formatting several times before this works along with the re-partitioning.
Note a legit TRLTETMO pit file can be found : http://www.sammobile.com/forum/showthread.php?t=29568
The legit pit file name for TRLTETMO should be labeled: TRLTE_USA_TMO.pit
sudoBacon said:
Request thread closed, resolved!
Steps taken not in any order.
Find a legit us TRLTE pit file. Message me for the TRLTE pit file or I'll make a separate thread for it.
Flash DOK2 stock firmware + proper pit file and have re-partition checked, along with flash BL and EFS clear.
Format ext SD card.
Downloaded the roms onto the formatted SD card.
Flash the latest TWRP recovery
Wipe all not including system x3 times.
Go to Wipe and then Format, check system format system type Yes
Go to install select your ROM.
Then select your GApps and custom kernel whatever else you want.
You might have to do the stock flashing and wiping and formatting several times before this works along with the re-partitioning.
Note a legit TRLTETMO pit file can be found : http://www.sammobile.com/forum/showthread.php?t=29568
The legit pit file name for TRLTETMO should be labeled: TRLTE_USA_TMO.pit
Click to expand...
Click to collapse
Congrats!
Hey bacon. I'm glad you figured it out. But in was wondering if you think me doing the pit file would work for my situation. Currently my phone is on a loop every time I flash dok2. And twrp will not flash any huge files. I can get kernels too flash but not roms. Any insight would be greatly appreciated. I can't even get the firmware too boot up. Thanks in advance
Jamonguyen said:
Hey bacon. I'm glad you figured it out. But in was wondering if you think me doing the pit file would work for my situation. Currently my phone is on a loop every time I flash dok2. And twrp will not flash any huge files. I can get kernels too flash but not roms. Any insight would be greatly appreciated. I can't even get the firmware too boot up. Thanks in advance
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24369303960684492
Here's a pit for the N910T, grabbed from the latest DOK2.
eduardog131 said:
https://www.androidfilehost.com/?fid=24369303960684492
Here's a pit for the N910T, grabbed from the latest DOK2.
Click to expand...
Click to collapse
I'm trying to get stock to boot without success. I would really appreciate any help.
Longshark said:
I'm trying to get stock to boot without success. I would really appreciate any help.
Click to expand...
Click to collapse
Have you flashed the full ODIN package? Try erasing NAND and Re-Partition (with .pit in ODIN package)
I will usually just go about it that way when I go to stock to start off fresh.
eduardog131 said:
Have you flashed the full ODIN package? Try erasing NAND and Re-Partition (with .pit in ODIN package)
I will usually just go about it that way when I go to stock to start off fresh.
Click to expand...
Click to collapse
So I'm flashing the full ODIN package. PDA for stock, PIT from the link you posted, Checked boxes are Auto Reboot. Re-Partition, F. Reset Time and NAND Erase All. This is with ODIN 3.07.
What do I do when it finishes?
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
eduardog131 said:
Have you flashed the full ODIN package? Try erasing NAND and Re-Partition (with .pit in ODIN package)
I will usually just go about it that way when I go to stock to start off fresh.
Click to expand...
Click to collapse
It's done but boot looping with RECOVERY BOOTING... screen. Do I flash TWRP now? I have 2.8.7. Is that sufficient?
Thanks
Longshark said:
So I'm flashing the full ODIN package. PDA for stock, PIT from the link you posted, Checked boxes are Auto Reboot. Re-Partition, F. Reset Time and NAND Erase All. This is with ODIN 3.07.
What do I do when it finishes?
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
It's done but boot looping with RECOVERY BOOTING... screen. Do I flash TWRP now? I have 2.8.7. Is that sufficient?
Thanks
Click to expand...
Click to collapse
It shouldn't be bootlooping, in fact it has to reboot into recovery right after ODIN flashes the stock package, it needs to erase + verify / flash CSC contents. It should pretty much boot up into stock. If you really want to flash TWRP (to flash a custom ROM), flash it. Right after you flash it, make sure you take the battery out and you reboot into recovery manually. Stock system prevents recovery from being overwritten.
eduardog131 said:
It shouldn't be bootlooping, in fact it has to reboot into recovery right after ODIN flashes the stock package, it needs to erase + verify / flash CSC contents. It should pretty much boot up into stock. If you really want to flash TWRP (to flash a custom ROM), flash it. Right after you flash it, make sure you take the battery out and you reboot into recovery manually. Stock system prevents recovery from being overwritten.
Click to expand...
Click to collapse
Sorry I'm fairly new to this. So it did boot into custom recovery. I just want the phone back to stock without TWRP or any bells or whistles.
Its on the stock recovery interface. Should I wipe data/factory reset? Or reboot system now?
Longshark said:
Sorry I'm fairly new to this. So it did boot into custom recovery. I just want the phone back to stock without TWRP or any bells or whistles.
Its on the stock recovery interface. Should I wipe data/factory reset? Or reboot system now?
Click to expand...
Click to collapse
Once it's done with verification of CSC, just reboot system. It should take a few minutes to set itself up, then will throw you into the setup wizard. Once you're there you're good to go.
eduardog131 said:
It shouldn't be bootlooping, in fact it has to reboot into recovery right after ODIN flashes the stock package, it needs to erase + verify / flash CSC contents. It should pretty much boot up into stock. If you really want to flash TWRP (to flash a custom ROM), flash it. Right after you flash it, make sure you take the battery out and you reboot into recovery manually. Stock system prevents recovery from being overwritten.
Click to expand...
Click to collapse
Also does it matter the dm-verity verification failed is showing at the bottom?
I try to use sam fix tool to get my baseband (unknown) and sim cad imei fixed
i use the tool and choose baseband fix it boot into donwload mode and flash something
after that my note 9 stuck bootloop
i flashed stock frimware using odin and didnt work
i flashed combination file and also got bootloop
i can go to download mode
but whatever i do my phone stuck bootloop
plz need help plz guys
BUT I MADE A EFS BACKUB USING SCRIPT CMD IT CREAT A FLASH FILE CAN BE FLASHED USING ODIN VIA AP
BUT I CAN ACCESS IT RIGHT NOW BECASE I HAVE IT IN MY WORK
IS THAT ABLE TO HELP ME FIX THE PROBLEME[/COLOR]
Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?
willhemmens said:
Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?
Click to expand...
Click to collapse
I used a tool to fix baseband the tool reboot my phone into download mode and flash something
i try to boot my phone it get bootloop i try flash stock rom still bootloop
i flashed combination file still bootloop
i think the tool did something to efs partition
Did you complete a backup with TWRP?
willhemmens said:
did you complete a backup with twrp?
Click to expand...
Click to collapse
no i didint flash twrp my device not rooted
devil499 said:
no i didint flash twrp my device not rooted
Click to expand...
Click to collapse
You shouldn't have used any tool.
You could have easily recovered your unknown baseband by simply flashing your stock firmware.
Retry flashing the Stock firmware. But this time, do a wipe cache partition, wipe data/factory reset in recovery mode first.
Use the latest stock firmware that is available for your country/CSC.
If you can find a pit file, include that in odin flash with the stock firmware. Put a checkmark on the "repartition" option.
It's normal for the device to take 5-10 minutes or more during the initial boot.
Sent from my SM-N960F using Tapatalk
Good luck dude when the mention above most really suck having a bricked note 9
jaylence said:
You shouldn't have used any tool.
You could have easily recovered your unknown baseband by simply flashing your stock firmware.
Retry flashing the Stock firmware. But this time, do a wipe cache partition, wipe data/factory reset in recovery mode first.
Use the latest stock firmware that is available for your country/CSC.
If you can find a pit file, include that in odin flash with the stock firmware. Put a checkmark on the "repartition" option.
It's normal for the device to take 5-10 minutes or more during the initial boot.
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
i have done that but didnt worked
plz help me
i didint find pit file for my device
n960f
HtcOnekid said:
Good luck dude when the mention above most really suck having a bricked note 9
Click to expand...
Click to collapse
i found this post https://forum.xda-developers.com/ga...ide-fix-n950f-efs-failed-to-mount-dm-t3831184
i beg you can you plz help understand it
Extract Stock firmware AP file (rename .md5 to .tar)
this i cant understand wich should i rename or what i do
Rename dqmdbg.img to efs.img (or smallest image must be smaller than 8000 KB). Extract Dqmdbg.img.lz4 so it’s just “Dqmdbg.img” and then rename it to efs.img and put that one in a tar. Other option is downloading a file that’s already made this way if your bootloader is binary 4, Saves you trouble of extracting / renaming: http://www.mediafire.com/file/589wuc...f/efs.tar/file (if you download this file just move onto number 3)
Add file new efs.img into tar archive.
Flash tar as AP file in odin + download mode
Reboot download mode
Flash Combination with odin + nand erase option on Edit: suggest you to flash stock rom first and oem unlock, don't need to wait for 7 days if imei is 0000 skip combination step
Device Should boot into Factory binary
Use IME to restore imei using *#06# (or imei 0000 in stock rom) Edit: This step is not required if efs backup is restored successful
Your device should have dm-verify failed in recovery due to drk error
Continue drk bypass for dm verify error below to continue
willhemmens said:
Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?
Click to expand...
Click to collapse
What? I'm using desktop. Is there a different view on mobile?
Bricked Note 9 due to efs
devil499 said:
I try to use sam fix tool to get my baseband (unknown) and sim cad imei fixed
i use the tool and choose baseband fix it boot into donwload mode and flash something
after that my note 9 stuck bootloop
i flashed stock frimware using odin and didnt work
i flashed combination file and also got bootloop
i can go to download mode
but whatever i do my phone stuck bootloop
plz need help plz guys
BUT I MADE A EFS BACKUB USING SCRIPT CMD IT CREAT A FLASH FILE CAN BE FLASHED USING ODIN VIA AP
BUT I CAN ACCESS IT RIGHT NOW BECASE I HAVE IT IN MY WORK
IS THAT ABLE TO HELP ME FIX THE PROBLEME[/COLOR]
Click to expand...
Click to collapse
I have the same problem with my note 9. Im looking if anyone can provide me with efs file of N960F Binary 3 so i can get it unbricked again.
I found this website but it has efs files for binary 1 and 2 not 3. Will it still work if i use binary 2 efs?
//frpdone.com/efs-mdm-samsung/
Did u find a solution?