Stock XXLPY/LPF only - confirmed and working. You Should not boot on AOSP/CM9 roms.
This is what my kernel is made off:
* Initramfs with the usual stuff (root, CWM support, recovery etc) based on CF-Root LPY
* Partitions properly mounted in the ramdisk to take the most out from the device
* VM values tweaked up for maximum performance/battery
* Conservative tweaked and made the default governor
* I/O boosted - I/O dirty writeback system backported from 3.2
* CFS scheduler tweaked for maximum interactivity
* CFS Autogroup enabled
* Deadline I/O scheduler by default
* TCP Westwood+ congestion scheduler by default as its more suitable for this kind of devices
* Kernel stripped of debug **** - the only debugs that stayed were: logcat, printk and kallysms (for Voodoo Louder support)
* CRC32 library that is used by a lot of internal kernel mechanics completely patched up to the latest version
* The usual Franco's magic
* SLUB memory allocator
* Wi-Fi power management - echo 1 > /sys/module/dhd/parameters/wifi_pm (this is only available with wifi is turned on. This boosts wifi signal and its specially useful for screen_off streaming, but it might waste a little extra battery)
* Lots more to be seen on my repository
Changelog:
r6:
* All governors removed but one - pegasusq from Samsung
* Merged gokhanmoral work on this cpufreq driver - all credits to him. Also cleaned up a defined but unused function
* fsync() calls reintroduced to match stock behavior. The device actually runs faster/smoother with this enabled - also safer for data integrity (this has nothing to do with superbrick bug)
* Disable mali-400 tracking debug
* Merged two stability hotplug patches from mainline Linux kernel
* Added two modules to userpsace where one can see how many times the CPU was hotplugged in and hotplugged out: cat /sys/module/stand_hotplug/parameters/ cpu_up_nr and cat /sys/module/stand_hotplug/parameters/ cpu_down_nr
* Removed overclocking at all - it was causing heat and stability issues. If you want OC use Tegrak app
* Some config cleaning
r5:
* Added overclock to 1,6Ghz
* Some fixups on cpufreq.c files on exynos arch directory
* initramfs updated to CF-Root v5.6 - all props to Chainfire
r4:
* Some Wi-Fi driver fixes (might help fixing those obtaining IP derps)
* Tons of warnings fixed for a more stable kernel - don't we all want a clean compilation?
* Compiled with special compiler flags for some extra bits of performance
* Fixed a section mismatch - this warnings are one of the worse kind and can possibly lead to big problems. This one is fixed
r3
* Removed MMC_CAP_ERASE - workaround to fix the superbrick bug - thanks Entropy512 for all the research and shared knowledge with us for this god damn bug
* Re-activated dynamic hotplug - the system seems to run smoother with this option and according to Entropy it gives us lower idle drain specially while the system is holding a wakelock
r2
* Initramfs fixed - recovery works, CWM works etc
r1
* Based on Samsung update3 for ICS kernel 3.0.15 - it contains the hardbrick bug so flash at your own rish or just extract the zImage and to /data/local, fire up adb shell and type this: dd if=/data/local/zImage of=/dev/block/mmcblk0p5 bs=4096 and then reboot
* Contains all the features wrote above plus some small ****s available on my git
* App will be updated in the next 12 hours with a full ICS layout plus tons of useful features. The current version won't load this new kernel version for ICS so don't bother checking it. I'll announce when the new app update is up
F.A.Q:
1. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg or logcat.
2. Battery sucks, my device is not entering deep sleep. FIX PLOX!
A: Fix it yourself, it's an app waking your device up not the kernel's problem. Also make sure you let your device settle for at least 2 charging cycles. Typically apps like Facebook and Google Maps can cause problems since they wake it up pretty much all the time
3. Signal is dropping since I flashed the kernel, amg u sucks!
A: The kernel has nothing to do with gsm/cmda signal. Make sure you have the latest radios
4. Do I need to wipe anything when flashing this kernel?
A: No.
5. Does this kernel has X or Y mod?
A: Learn to read, everything you need to know is in the features list, changelog or public repo.
6. Don't use 3rd party init.d scripts!!!
franco.Kernel updater app for Galaxy Note features:
#2.0
* Completely re-written app
* Ice Cream Sandwich theme
* New CPU frequencies panel
* Governor Control
* Settings panel with Power Modes with my own specialized presets
* XDA thread link in the menu button
* Other settings and options
Download: http://minooch.com/franciscofranco/Galaxy%20Note/ (flashable with CWM recovery)
(Thanks minooch for the hosting)
franco.Kernel updater app: https://market.android.com/details?id=com.franco.kernel.note
franco.Kernel updater app from Android Pit: http://www.androidpit.com/en/androi...nco.kernel.note/franco-Kernel-for-Galaxy-Note
Sources: https://github.com/franciscofranco/GT-N7000-ICS-3.0.y
Thanks, have to check it out and see if it can beat SpeedMod battery life.
Awesome, great to see yet another awesome Franco kernel. You guys are going to love his kernels. They are by far the best kernels you will find. Hop on early for the. Bragging rights
Thanks Franco, maybe soon I'll buy this phone too (if I can get the wife's approval)
wow! one more kernel to try...if possible can you include redpill recovery!
the one thing i missed about my gnex, your kernels!
stoked thanks!
Flashed it a couple of minutes ago. Looking pretty good so far.
I feel that responsivness and scrolling are better than with CF (my usual kernel of choice). There's almost no launcher lag, which is saying something.
Now to see how it affects the old battery...
P.S. It is also compatible with CWM Manager.
Thanks for your hard work, Franco.
Good to see you here franco, heard lots of good things about your work. Downloading now
Sent from my GT-N7000
GALAXY NOTE moved on to the next level !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHO IS Francisco Franco ??
1.4 Ghz (no SetCpu installed)
How dare you Franco! How dare you post in our forum!
now im going to fall in love with your kernal
This is Great!
Welcome here mate
I've just done backup from CWM Manager, and it was successful.
However, when the phone tried to reboot, it got into bootloop (with both led lights on all the time). Wiping cache/dalvik didn't help.
Restoring my previous Rom now.
Thanks everyone for the warm welcome.
@chasmodo
I can't give you an answer for that, I only have the device for like 30 hours, still lots to learn about it.
franciscofranco said:
I can't give you an answer for that, I only have the device for like 30 hours, still lots to learn about it.
Click to expand...
Click to collapse
It's no big deal, mate, not my first bootloop, and I'm pretty sure it won't be the last either. You'll fix it, I'm sure.
Friend recommended me this kernel. It's great !! Thanks for your hard work
Welcome Franco!
I have been using your kernel since Nexus S and just changed to Note recently.
And you come! !!! Amazing !
Sent from my GT-N7000 using Tapatalk
Nice to see u again Franco after GN
Just installed and i finally have speedy GB!
By the way no bootloops nothing.
Ps coming from cwm restore after running few days CM9
Also it cannot flash with CWM manager.It gives me error for zImage.
Flash as franco said through recovery
Sent from my GT-N7000 using Tapatalk
Very responsive. More responsive compared to speedmod k1-5. .
afilopou said:
finally have speedy GB!
Click to expand...
Click to collapse
----------CONFIRM !
franciscofranco said:
Thanks everyone for the warm welcome.
@chasmodo
I can't give you an answer for that, I only have the device for like 30 hours, still lots to learn about it.
Click to expand...
Click to collapse
The good part for me is that you have the Note your own and not like some other great devs who develop with their thoughts and not support us a lot.
So, welcome mister and i hope you enjoy this great smartphone...
You will focus on ondemand governor?
Sent from my GT-N7000 using Tapatalk
chasmodo said:
I've just done backup from CWM Manager, and it was successful.
However, when the phone tried to reboot, it got into bootloop (with both led lights on all the time). Wiping cache/dalvik didn't help.
Restoring my previous Rom now.
Click to expand...
Click to collapse
for me no bootloop...i tried rebooting twice!
Related
[Kernel] CM7/MIUI Platypus (Voodoo Sound v8, Color, OC/UV, LED, & more!) [05/03/2011]
CM7/MIUI Platypus kernel.
Sound, Color, Nodebug, and more!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before going any further, please know this is for CM7 Gingberbread 2.3.3/MIUI ONLY.
DISCLAIMER: The kernel (binary) and driver modules are provided as is. If problems occur they most probably are from upstream and can be fixed with the newest version. Since I'm doing this in my free spare time as a hobby (quenching my thirst for tweaks & performance.), updates will occur irregularly as time permits and I see fit. (Most probably when new features & bug-fixes arrive.) YOU are responsible for the actions that you take (such as over- or underclocking), etc. You agree that I can not be held liable for any potential damage that arises from your actions in combination with or the usage of this kernel and other related parts.
Credits:
Google & the whole Android crew.
Linus Torvalds & the kernel hackers for upstream Linux.
Cyanogen & all the devs out there hacking on this.
Supercurio for enriching our media experience of this smartphone.
codeworkx, coolya, guiper.
laststufo & hardcore and all the other kernel hackers on the SGS forum.
zen-kernel team for inspiration to create a kernel, too.
all other contributors (devs, users, etc.) who make this possible.
Main features:
Voodoo Sound v7. - Need I say more?
Ext4 - Stability and data integrity fixes.
SLQB - For more a efficient & faster handling of files in memory.
Voodoo Color. - Again, you should know this by now.
LEDNotification. - Not "BLN" - No app required - Use CM quiet hours for scheduling. (Thanks to bilboa1)
Kernel, App, and Network Security.
Disabled kernel DEBUG. - Disabled DEBUG in kernel code.
Overclocking/Undervolting. - 1.3Ghz max.
Extra governors. - Smartass, Interactive.
Various tweaks. - JPX screen timings.
More information here: http://pastebin.com/LNUu3TM3
Changelog:
Working external SD card access & usb tethering
Working auto-rotation and sensors (check it's on; if not working: 1st boot: Power button press 10+ seconds -> forced reboot/hard reset)
CONFIG_HZ @250 USER_HZ @150 (like "rocketeer")
Almost feature-complete (like "rocketeer")
Added ported new bcm4329 (WIFI) drivers from intersectRaven's 2.6.37.6 kernel - kudos to him (Supposedly less battery consumption)
Better reception quality. (Less noise) with new WIFI drivers.
More info on changelog here; http://forum.xda-developers.com/showpost.php?p=11846546&postcount=3
Download:
Changelog:
(05/03/2011) Changes [from 05/01] for CM7_SGS_platypus-kernel_20110504_r0_quorra-r5 (needs new drivers)]
[matches with 05042011 and 05032011 update from CM7]
• AIO re-enable (whatever uses that)
• oabi-support deactivated [less overhead] (need feedback on [old !] apps breaking)
• OOM rework [better memory management & out of memory handling, need feedback]
• light sensor polling interval from 0.2 s to 1 s
• new CodeSourcery toolchain 2011.03 [better & more efficient code, less battery usage with new compiler flags]
• some more GPIO improvements from upstream (potential battery savings, probably especially for CAPTIVATE & VIBRANT) [sdcard & audience-chip related]
• FFcamera fixes from upstream [camera app still hanging while trying to take pics; better picture ?]
• WIFI fix / improvement: Clean ARP offload table on IP update
• deactivated GPU debug stuff
• doubled size of Kernel log buffer size for easier troubleshooting
• disabled Android kernel panic handler (we have last_kmsg for that)
• disabled CONFIG_DM_UEVENT [udev ?! not needed on Android], less events, less overhead, more (?) battery runtime
• enabled TRACE_UNDERRUN for s3c fb (stability)
• enabled CONFIG_SCHEDSTATS for better research on what is nagging our battery
• enabled "null" encryption key/algorithm for IPSec support
• enabled NTFS read & write support (basic)
• circumvented a compiler bug to let it compile with more optimized flags with cache size in mind [need feedback if these affect battery runtime negatively]
• fixed WIFI compile failure (2 array problems this time for good; kudos to LeeDroid for his help !)
• deactivated SYSVIPC (less overhead and we don't have it available on Android)
1) Quorra r5 [(probably) NOT compatible with MIUI (MIUI needs new sensor drivers, depending on MIUI release)]
1st mirror:
CM7_VIBRANT_platypus-kernel_20110505_r0_quorra-r5_toolchain.zip (thanks to Roland for hosting !)
2nd mirror:
XDA - post (attachment)
3rd mirror:
CM7_CAPTIVATE_platypus-kernel_20110502_11_quorra-r4.zip (5.16 MB)
md5sum:
e0014f786475fab7cee3cb084c656602 CM7_VIBRANT_platypus-kernel_20110505_r0_quorra-r5_toolchain.zip
1) Quorra r5 [INTERACTIVE] [(probably) NOT compatible with MIUI (MIUI needs new sensor drivers, depending on MIUI release)]
1st mirror:
CM7_VIBRANT_platypus-kernel_20110505_r0_quorra-r5_toolchain_INTERACTIVE.zip (thanks to Roland for hosting !)
2nd mirror:
XDA - post (attachment)
3rd mirror:
CM7_CAPTIVATE_platypus-kernel_20110502_11_quorra-r4_INTERACTIVE.zip (5.16 MB)
md5sum:
12d3a8d3204ad0053e6c447055181af6 CM7_VIBRANT_platypus-kernel_20110505_r0_quorra-r5_toolchain_INTERACTIVE.zip
FAQ:
Q: I get a black screen after first boot, after some time, only bottom buttons light up.
A: Keep power button + home + vol up pressed until it reboots and it shows samsung galaxy s logo.
Hold it for some seconds shortly before the Cyanogenmod splash appears (Timing!) [Same like getting into Recovery]
Wipe /cache & Dalvik Cache again & "reboot system" - now it should work
Q: Auto-rotation isn't working, what's wrong?
A: Check that it's enabled in settings or the notification power widget. If all else fails, press the power button down 10+ seconds until it 'hard' reboots. (Ignore appearing power menu.)
Removed post
this works for MIUI, so why does it say..
Before going any further, please know this is for CM7 Gingberbread 2.3.3 ONLY.
The post i posted at first was regaruding that lol
Sent from my SGH-T959 using Tapatalk
xriderx66 said:
this works for MIUI, so why does it say..
Before going any further, please know this is for CM7 Gingberbread 2.3.3 ONLY.
Click to expand...
Click to collapse
sTyLeSz said:
The post i posted at first was regaruding that lol
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
thanks guys !
just changed that in my main thread from
[CM7] to [CM7/MIUI]
thanks !
@theexel:
please also updated
zacharias.maladroit said:
thanks guys !
just changed that in my main thread from
[CM7] to [CM7/MIUI]
thanks !
@theexel:
please also updated
Click to expand...
Click to collapse
Done. Updated!
Very nice. Test driving conservative, feels nice.
wow! CM7 with ext4, damn. ow I'm really getting interested to CM7.
Sent from my SGH-T959 using XDA App
I had three reboots running this today. The first two occurred when I opened apps, (a game and a streaming radio app). The third time was when I took a phone call. After the third reboot I couldn't get a cell signal, even after a couple of reboots/trying to select a network manually. Ended up having to flash a different kernel to get the phone working again. Before these issues, however, it was running great, and seemed to perform better than my current kernel... not sure what got in to it. Will wipe and try it again!
iynfynity said:
wow! CM7 with ext4, damn. ow I'm really getting interested to CM7.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
it's actually fixes for ext4
and ext4 afaik is only used on /data
something to play around for you guys - the following should cut battery consumption approx. by half:
Only for experienced users (!):
Testing request (potential better idle battery runtime):
ok guys,
please test the following:
extract 89system_tweak
from the kernel update package and change following line:
from
Code:
setprop pm.sleep_mode 1;
to
Code:
setprop pm.sleep_mode 0;
(have a backup of the kernel update package)
then delete 89system_tweak in that update package and replace it with the modified one
experience in the past showed that when changing from
setprop pm.sleep_mode 1;
to
setprop pm.sleep_mode 2;
battery runtime got worse
so changing it to the highest battery saving level (0) it should improve things
for best results & if it works you can try to use JVK modem (were usable)
that gave me the best idle and overall battery runtime so far
thanks !
Click to expand...
Click to collapse
Is this kernel going to get updated with the latest cm7 nightly?
Sent from my SGH-T959 using XDA Premium App
hitman818 said:
Is this kernel going to get updated with the latest cm7 nightly?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I see no kernel updates at the repo
so it's already up-to-date
So if I flash the kernel the fixes will still be applied with the latest nightly?
Sent from my SGH-T959 using XDA Premium App
hitman818 said:
So if I flash the kernel the fixes will still be applied with the latest nightly?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
well,
found the changelog in the captivate CM7 thread
Changelog:
20110415:
- Fixed potential deadlock when sharing 2 SD cards over USB.
- Updated to new wifi driver, has better noise and power characteristics.
Click to expand...
Click to collapse
the 1st should be only system-related
the 2nd is already included in my kernel
so the short answer: yes, should work
What's the difference between the two downloads you have posted here?
Sent from my SGH-T959 using XDA Premium App
OT Just 4 Fun!
Getting random reboots opening pulse and websites anyone else?
i am testing this right now, i'll let you know how this work on the vibrant, because it looks like this was made on the I9000 forums.
Just out of curiosity, what is the difference between this kernel and bilboa's CM7 kernel?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-----------------------------------------------
Disclaimer:
-----------------------------------------------
I Will Not Be Responsible For Bricking Your Phone, Voiding Your Warranty, Or
Any Other Pain Or Suffering You May Feel As Result Of Using This Kernel.
This Kernel Is Made Available To You As Is, No Warranties Can Be Given.
If You Point The Finger At Me For Messing Up Your Device, I Will Laugh At You.
If You Do Not Agree With These Terms,Then Do Not Download The Kernel.
-----------------------------------------------
Change Log:
-----------------------------------------------
Code:
[COLOR="Blue"]v5.0[/COLOR]
0% Battery Patch
Add SFB Net Scheduler
Allow CPU Unaligned Access
ARM JIT Compiler For Packet Filters
Based On 4.1.B.1.13
CPU VDD Levels Sysfs Interface
Custom CWM Recovery 6.0.2.8
NEON & Snapdragon Optimizations
Optimized ARM RWSEM Algorithm
Optimized CRC32 Algorithm
Proportional Rate Reduction For TCP
Reclaim Some Ram
Add Governors - InteractiveX,Smartassv2
Add IO Schedulers - SIO,V(R)
Update Android Drivers
Update Jhash
Update Linux Kernel To 2.6.32.60
Update LZO
Various Other Patches, Tweaks, Fixes...etc
[COLOR="Blue"]v5.1[/COLOR]
Add Snappy Compression Support For zRAM
Apply Patches To RCU
Change Memory Allocation Method
Change Memory Split Method
Enable CFQ I/O Scheduler
Set Correct Default Min/Max CPU Frequency
Switch To Snappy Compression For zRAM From Default LZO
Update CWM To 6.0.3.0
Update Snappy Drivers
[COLOR="Blue"]v5.2[/COLOR]
Merge FXP ALS Changes
Revert To Old Boot Logo
Tweak Display
[COLOR="Blue"]v5.3[/COLOR]
Add Support For CM10.1
Applied Patches To:
readahead
aio
kmod
Include Version Number In Kernel
Integrate Modules Into Boot Image
Fix Iyokan Touch Precision
Update CWM With Latest Changes
[COLOR="Blue"]v5.4[/COLOR]
Increase pmem
lib: genalloc: Change Chunk Allocation To vmalloc
jbd2: Fix fsync() Tid Wraparound Bug
jbd2: Fix Potential Memory Leak
Update CWM To 6.0.3.1
[COLOR="Blue"]v5.5[/COLOR]
Add Support For MIUI
Apply Patches To:
cpufreq
ashmem
-----------------------------------------------
Download:
-----------------------------------------------
Please Do Not Mirror
Arc Fusion
Neo Fusion
Pro Fusion
Ray Fusion
Fusion Modules
-----------------------------------------------
MD5 Checksums:
-----------------------------------------------
CA3173E1EBB3169A1AEC0394B8D3DF78
5E70059E7CA2428E9339E84A94C095F9
98345FABF7846A4DDCC14162A4115C04
CEC26DDEA728124C08C186CA733421E0
BD3D7627C08BFF64DBAA23B3789A1A5F
-----------------------------------------------
Instructions:
-----------------------------------------------
Flash Kernel Using Fastboot
Before Posting
*Read FAQ
*Search
Don't Quote The OP
-----------------------------------------------
Thanks:
-----------------------------------------------
Sony & FXP Team - Kernel Source
adridu59,CAF,FXP Team,krizky82,All Linux Kernel Developers - Kernel Patches
Jerpelea,mericon - Support
skritchz - Fix Shaking Recovery
paul678 - pmem ADSP Values
besttt,Langes - Testing
fuser1337 - Thread Banner
-----------------------------------------------
Source:
-----------------------------------------------
Kernel - 4.1.B.1.13 + Patch
RAM Disk - Custom
-----------------------------------------------
Compiler:
-----------------------------------------------
Linaro GCC 4.7.3
-----------------------------------------------
Banners:
-----------------------------------------------
HTML:
[URL=http://bitly.com/TaTmQB][IMG]http://i.imgur.com/BdxDWlK.png[/IMG][/URL]
Frequently Asked Questions
Stuck At Boot Logo?
The First Boot Will Always Take Some Time (Don't Panic),The Subsequent Boots Will Be Faster.
How To Use USB OTG?
Use This App.
What Is The Recommended Governor And IO Scheduler?
Read This Thread And Find Out Which Suits Your Needs.
Will This Kernel Support 720p/OC Above 1.6 GHz/TWRP/X Governor /X IO Scheduler?
No,Please Use Other Alternatives Which Supports Them.
How To Get Logs?
Open Terminal App
Enter "su"
Enter "dmesg > /sdcard/dmesg.txt"
Enter "cat /proc/last_kmsg > /sdcard/last_kmsg.txt"
Enter "logcat -f /sdcard/logcat.txt"
Note:
While Reporting Issues Please Be More Descriptive
Make Sure You Are On Latest Version Of Kernel
Attach Logs
You Can Use The Bug Report Template Found Below To Assist
Bug Report Template (Thanks Boudin)
Code:
Device :
ROM :
Baseband :
CPU Min & Max Frequencies :
CPU Governor :
I/O Scheduler :
Problem Description :
Thanks Mate. Downloading.
Edit:
Downloaded and flashed.
Initial issue, the first boot resulted in a hang and I had to pull out battery and restart.
On second try after the boot screen the phone rebooted itself.
All fine from then onward, though boot time has increased.
Wifi modules from FXP kernel worked fine.
It "feels" faster. I have tried playing two games, Asphalt 7 and "The Dark Knight Rises" and both "feel" much smoother.
Thanks.
AnTuTu score with FXP Kernel : 3528
AnTuTu score with Fusion Kernel : 3561
Device : Xperia Arc LT15i
Rom : AOKP
Thanks very much. Do you have some recommended settings for Arc? Like OC...
While testing besttt said kernel is stable till 1.7 Ghz.
I don't OC much,very rarely i do it only when needed.
any plans to update and based this kernel from fxp141 ?
thanks
sorry i don't read today you released this kernel..
i will test and give a feedback thx
Please, excuse me. What is the ZRAM and how to use?
Thanks for kernel. Looks great.
downloading now.. thanks mechmetal for the kernel :good:
@miqz
This kernel is already up to date,only ram disk is from fxp 138 which is just an initializer for modules and other hardware setting.
boot image=kernel+ramdisk
@kyawswaraung
Just flash zram enabler
Thanks mate. Jut flashed.
1st boot results in system hang and need pull out battery
2nd boot stayed on boot logo a long time and then reboot itself twice, then everything goes fine.
It seems faster than v3.2, no Wifi on/off issue (I randomly got wifi issue on v3.2, status hang after turn off wifi and need restart).
Youtube plays fine.
Let's see how about the battery life.
It seems there is some issues on booting.
I tried to reboot manually. Again, it sucks on the boot screen a long time and then reboot 3 times itself, finally system hang. I ever can't boot into recovery and need pull out the battery again. It boot into system then. No such booting issue in v3.2.
Did I should use Antutu Cpu master??
coz I already use No-Frills....
Sent from my Xperia Arc
@AndriyeZ
Nope,you use what ever app you wish but i recommend that app as it has neat UI for UV tables.
mechmetal said:
@AndriyeZ
Nope,you use what ever app you wish but i recommend that app as it has neat UI for UV tables.
Click to expand...
Click to collapse
Got it...!
Sent from my Xperia Arc
Thanks and everything is OK. No problem was found in my LT18i.
tintin814 said:
Thanks mate. Jut flashed.
1st boot results in system hang and need pull out battery
2nd boot stayed on boot logo a long time and then reboot itself twice, then everything goes fine.
It seems faster than v3.2, no Wifi on/off issue (I randomly got wifi issue on v3.2, status hang after turn off wifi and need restart).
Youtube plays fine.
Let's see how about the battery life.
It seems there is some issues on booting.
I tried to reboot manually. Again, it sucks on the boot screen a long time and then reboot 3 times itself, finally system hang. I ever can't boot into recovery and need pull out the battery again. It boot into system then. No such booting issue in v3.2.
Click to expand...
Click to collapse
I faced similar issues with booting.
Which device you have Arc or ArcS ?
mechmetal : Is there some logs we can provide for you to investigate this booting issue ?
@abhayks
Strange,I have not faced this issue once.What kernel were you using before?
If possible can you try these steps and report whether the issue persist s.
Flash latest stock ftf
Flash fusion kernel
Wipe everything
Flash any jb ROM
Thanks
seems kernel boots on 2.0ghz, that causes reboots.
Devoct said:
seems kernel boots on 2.0ghz, that causes reboots.
Click to expand...
Click to collapse
download setxperia go to voltage settings and overvolting a little the freq above 1400 just 50mv each i think wants overvolt
besttt said:
download setxperia go to voltage settings and overvolting a little the freq above 1400 just 50mv each i think wants overvolt
Click to expand...
Click to collapse
Is it have to do wipe battery stats before OV ??
Sent from my Xperia Arc
AndriyeZ said:
Is it have to do wipe battery stats before OV ??
Sent from my Xperia Arc
Click to expand...
Click to collapse
its no need to do this all of you only for testing if you have kernel double boot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ARM.
The Next Reliable Managed Architecture.
NOTE
- ARM or Android Reliant Management, Aims to bring full battery saving to our devices and add features not introduced. This would of course reduce battery hunger and at the same time, sustain the performance of our phones.
THIS IS A MODDED Kernel with Many fantastic features within. I am not responsible or credited for the kernel source codes whatsoever. I only modify the kernel to my needs and add more features not available from the base which will be beneficial to all of us. This Kernel is GPL Compliant and is fully Open Source. Please provide a CLEAR Credit should you use this Source as your base.
Click to expand...
Click to collapse
- Dynamic Frequency Mode - Improves Battery Life & Performance
- Added Governors for more options
- Tweaked to the limit for more performance
- Sustained Battery Life while improving Performance
- Added More I/O Schedulers for more options
- Edited/Re-Engineered Hardware modules for more Power Savings
- Overclocking up to 1.5GHz (EXPERIMENTAL. Use at your own risk)
- Overvolting for high performance activities
- Undervolting for Power Saving
Click to expand...
Click to collapse
Source Code Distribution
Github [CM] - Source
===============CHANGELOG=================
Base : CyanogenMod 10
Maintainers : nicholaschw
=Older Bootloader=
~~~~~~~~~~~~~~
Nightly 1
- Initial build
- Toolchain Fixes
- Added Powersave governor
Nightly 2
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
=Newer Bootloader=
~~~~~~~~~~~~~~
Nightly 3
- Initial Build
- Fixes for Wireless compiling bugs
- Toolchain fixes
- Added Powersave, Hotplug & SmartAssV2 Governors
- Added SIO Scheduler 2012
- Tweaked I/O Schedulers
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
Nightly 4 FINAL
- Added lulzactive governor
- Added 1.5GHz OC
- Add OV Support
- Add UV Support
- Tweaks into drivers
Nightly Plus
- Fixed Zip (Thanks to benee)
- Added some extra modules
- Rebased Sources to fix toolchain related errors
Nightly Build 6
- Reduced OC to 1.3GHz
- Fixed voltage arrays
Nightly Build 7
- Added configs for OC
- Disabled OC for now
v1.00 Golden Master
- Tweaked OC for stability
- Reduce backlight brightness to minimum
- Tweak the DVFS for UV and OV Stability
Click to expand...
Click to collapse
====================
Bugs + CM +
--------
- All CM10 Kernel Bugs
-Credits-
CyanogenMod, for providing AND fixing the source codes actively
YOU, Readers, for providing me a place to allow you to give me suggestions
Xonar, For assisting in many parts of the modifications
cyclon, for introducing new modifications
Google, For allowing me to identify whatever errors i face.
Vork & Koush, For AnyKernel Flashable Zip
benee for the zip fix
The Other Githubers who I merged commits into source
> XDA Community, Giving comments on whatevers best for implementations
ANY FLAMING OR CRITICISM WILL BE REPORTED.
ARM., Is not to be mistaken with ARM. ARM. Is not related to ARM Whatsoever in terms of name.(We use ARM for our processor, so we are related somehow by, the ARM architecture used in our phones.)
+DO NOT MIRROR+
EVERYTHING IS GOING ACCORDING TO DATE OF RELEASE.
Bug Reports? Post them here. Please include a logcat and dmesg and a brief situation of what happened visually. Doing this will get your bugs fixed faster.
How To Install
- Download the flashable zip below
- Put it into your sdcard (Anywhere you like. Just remember its location)
- Boot into recovery
- Wipe cache, Dalvik Cache (NO NEED TO WIPE DATA UNLESS YOU WANT TO)
- Install the zip package
- Reboot
- Enjoy the Excitement!
Troubleshooting?
- WIFI Failure = - WifiModule-ConservativePM-V3.zip -> super conservative on battery, less wifi reception
Download
- WifiModule-NormalPM-V3.zip -> will go in full mode when not asleep, a bit more power hungry, full wifi reception
Download. (Thanks to pengus77)
Link List - CYANOGENMOD BASED (Old Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-Nightly1-P990.zip - 5.08 MB [28-12-12]
md5: 7d36e7ac1891345ce89e62326a9979be
ARM-Nightly2-P990.zip - 5.08 MB [28-12-12]
md5: e46c3a8c989d61b67d8a4d2e437a26b9
*NOTE* OLD Bootloader Version will carry on, but each release takes longer than the new bootloader
Link List - CYANOGENMOD BASED (NEW Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-P990-Nightly3.zip - 5.08 MB
md5: d52342cb01a3b60a11cca65a8b208a0a
ARM-P990-Nightly-FINAL.zip - 5.09 MB
md5: 7c4ccf986c9fda2105b6462adcd51487
ARM-P990-NFPlus.zip - 4.78 MB
md5: 580c2e29326ea0b5d016baccffadf7f4
ARM-P990-B6.zip - 4.78 MB
md5: 0f2842812e41b235d6bf14acac2511a3
ARM-P990-B7.zip - 4.78 MB
md5: f3cde8f65bf3e7875f84247799d0e235
FAQs
+ Q: Whats the difference?
A: Read the disclaimer.
+ Q: Will I get worse performance than the Official CyanogenMod Kernel?
A: It depends on what commits are added. My Kernel only fixes bugs i can fix and which are unsolved and Of course, I will add more features not available in CyanogenMod Official
+ Q: What makes the stock kernel different?
A: You get goodies, and furthermore, better battery life and performance in this project.
Nice to see a singaporean are so gd in it. Gd job Bro
Is it compatible with unlocked new boot loader?
Sent from my LG-P990 using xda app-developers app
oOPS, me forgot to mentionn,
New bootloader version to be released next week.
This is a clean build of the old bootloader, note that only features come in next week.
For the new bootloader, the initial is next week and features come in the following week.
EDIT~
Push the newsworthy thread link now! When we go on the portal news, you get ten times more goodies! Help ARM. develop its potential!
good luck with your arm project sir. cant wait to test for the new bootloader version.
mkchan said:
good luck with your arm project sir. cant wait to test for the new bootloader version.
Click to expand...
Click to collapse
sure!
almost want to go to old BL just to try it =D. sounds erpic!
no testers reported back yet?
If it is not to much for you can you please releas the nightly not only for the new (bl) in the future. also for the old (BL).
Gr8 News, cant wait next week to try the new bootloader version :good:
Thanks for the Hard Work!
Great! Thanks for your work man, tried and seems very good! But the freq of the cpu in interactive gov is always at 1000mhz xD
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
nicholaschw said:
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
Click to expand...
Click to collapse
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
kekks said:
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Its a Kernel. -_-
thanks definitely gonna try it.....working with new bl is the great news.....Thanks....
Me gusta
nicholaschw said:
Its a Kernel. -_-
Click to expand...
Click to collapse
xD
--------------
Well, I don´t know where the 'bug' is coming from, but since the new CM10, notification light isn't working anymore. I'm no kernel developer but I think the issue is there anywhere.
It would just be nice if you maybe could have a look there, as it's a feature, I miss for more then a month now.
With the kernel on the new bootloader my Wifi doesn' t work -.-
Gesendet von meinem LGP990 mit CM10.
Please Read the 2nd OP before posting bugs here.
And, updated OP for WIFI Fix.
Take note, the fix is only for those who get those issues. DON'T Flash unless you get the problem.
Now, If you let me peacefully add more features
Saving up for an O2X!
EDIT
Updated OP for final Nightly.
Next version is the GM. Its the final version before release channel, which will be uploaded to ROM Manager's database.
hi there nicholas, i was just wondering, since this kernel looks very promissing, is there any chance of merging voodoo sound support in the future?
Hi guys,
since we haven't got any kernel for our omni roms I've decided to make one. For now it's just an alpha but to me seems pretty stable I'm releasing here as a test. Please report what do you think. It's based on "stock" omni kernel with overclock (for now I'm using this commits https://github.com/marco9333/androi...mmit/1d75a501447e609dbb412c350d79ac1ef720a630 and https://github.com/marco9333/androi...mmit/36cf4ca9c78144f336dad4af88049b4a6bf59fac but from next release I'll try @humberos commit https://github.com/humberos/android...mmit/5f768f943d0c420860575e22756b58ff64f0c596 as he suggested See changelog below).
I've tested on Omnirom and @nerdyblonde reported it is working on Carbon, feel free to try on any AOSP based rom (not Samsung based)
Features:
An awful name (I'll try to find a better one)
Different versions for n8000 and n801x
Overclock up to 1600Mhz (booting max freq is 1400Mhz) and underclock to 100 Mhz (booting min freq is 200 Mhz) -> version 0.2 and newer
I've added a (temporary) my commit https://gerrit.omnirom.org/#/c/9555/2 to force cpu frequency range to stock values (I'll decide about merging this in omni rom official builds)
Version 0.1 built with different flags and toolchains but from the next one I'll use only linaro (maybe I'll try sabermod too) See below
See changelog
TODO:
Add fast-charge -> I've almost finished this, I hope to post an update soon (maybe today) DONE
Add underclock (100 Mhz, see humberos commit above) Done.... version 0.2 and up See below
Change installing script to solve possible dialer problems with some roms (unpack modify and repack original boot.img I'll use https://github.com/ModdingMyMind/boot_manipulation but I'll need some time)
Add more schedulers and/or governors (???)
Tell me what would you like to have and I'll think about that
Add thanks to all the developers
DIRECT DOWNLOADS Version 0.6 (LATEST):
N8000 -> https://www.androidfilehost.com/?fid=95784891001603463
N801x -> https://www.androidfilehost.com/?fid=95784891001603462
Link to version 0.5 are removed -> Some tweaks weren't included in the zip so I'm releasing a new version. See second post for changelog
Previous version 0.4:
N8000 -> https://www.androidfilehost.com/?fid=95747613655041727
N801x -> https://www.androidfilehost.com/?fid=95747613655041728
DOWNLOADS FOLDER: https://www.androidfilehost.com/?w=files&flid=19342
HOW TO INSTALL
(*optional) Make a backup (or just keep the original rom zip so you can reflash that to go back to stock omni without losing data)
(*not optional) Use this at your own risk I don't take responsibility for any crash, excessive heat, forced reboot, and whichever problem you could have
Flash the zip in recovery, no need to wipe anything, reboot
Thanks to:
* Omnirom team
* @iofthestorm (is the one who ported and made our devices official with omni)
* @humberos (underclock)
* @Lord Boeffla (overclock)
* @Christopher83 (I'm using his toolchains)
* See my sources on github
CHANGELOG
Version 0.1
Initial release
Version 0.2
Added frandom(See https://github.com/Ryuinferno/frandom-android for reference)
Added underclock down to 100Mhz (Thanks to @humberos)
Added more build flags (Check http://forum.xda-developers.com/showpost.php?p=36693600&postcount=9 for reference)
Version 0.3
Added fastcharge support in kernel drivers(need some testing to check the best currents) -> Disabled by default but can be enabled anytime without reboot(Maybe an entry in Advanced settings??? See next post)
https://github.com/marco9333/androi...mmit/b3e4981b88be28d59ab01052cf3f66d5e411c88b
Added support for ntfs and exfat filesystems https://github.com/marco9333/androi...mmit/27b3a545c6651fc89fd8a1eaf0bc801dc6222b09
Now powerkey should switch the screen on faster (no lag between pressing and screen on) All credits to https://github.com/dsc-team/dsc-team-kernel-project Not working
Added some patches from linaro, they should give more battery juice-> got about +400 points with antutu if you believe in benchmarks... I don't
Version 0.4
Changed mounts flags for system,data,cache and preload (with antutu I had about 300 for storage I/O now is around 980-989 with cfq, got better result with row, test it if you find some improvements)
Added some patches from linaro (see my github)
Increased i2c speed with wacom digitilizer(I'll test this tomorrow)
Increased sampling rate of wacom digitalizer (S-PEN should beis smoother (IMHO))
Added init.d script editable by user to set cpu frequency,fast charge and s-pen tweaks(for now)
Fixed Broken charging animation when the tablet is off (I will merge this into official omnirom after some testing, maybe I'll release here before as a preview, if you're curious https://gerrit.omnirom.org/#/c/9658/) ->
Merged into omnirom, if you're using omnirom now this fix is present "by default", if you have another rom the fix is still installed with the kernel (Report if not working)
Backported xpad driver (xbox, xbox 360 and xbox one controller support) from linux 3.17 (Needs testing)
Backported ps2, ps3, ps4 driver from linux 3.17 (Needs testing)
Other minor changes
Version 0.5
Fix for camera recording and hd video playing (waiting approval approved and merged into official omnirom -> https://gerrit.omnirom.org/#/c/9943/ and https://gerrit.omnirom.org/#/c/9944/)
Reduced hdmi out resolution to 720p and set hdmi audio to 2ch (Quite useless now since hdmi isn't working)
Introduced compiler flags from JustArchi's github and switched to linaro-4.8.4 (should give a performance boost)
Version 0.6
Enabled previous added SMT (http://en.wikipedia.org/wiki/Simultaneous_multithreading)
Patches for conservative and ondemand governors
Added zzmoove governor
Enabled more governors (interactive and adaptive)
Other small changes (check my github)
Source: https://github.com/marco9333/android_kernel_samsung_smdk4412 and https://github.com/marco9333/android_device_samsung_n80xx-common
How to temporary enable fastchargeYou need a rooted device but since you're using a custom rom I assume that you have it
Download a terminal emulator app on google play store
Open it, write su and press enter(superuser or supersu should popup, grant root access)
Write echo 1 > /sys/kernel/fast_charge/fast_charge to enable
Write echo 0 > /sys/kernel/fast_charge/fast_charge to disable
Done
This settings will be reset on startup, if someone is interested I can write a init.d script to set fast_charge on boot just let me know DONE. See below
Stock charging settings AC -> 1800 mAh USB -> 600 mAh
Fast charging settings AC ->1900 mAh USB -> 1500 mAh
How to set kernel parameter on boot (Version 0.4 and up)
You need root and a root browser (like https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree)
Go to /system/etc/init.d and open 99mm_alpha file (it's a plain text file)
All the settings are commented
First section is for cpu frequency set on boot (by default max freq is the stock one so no overclock, try to set it with a kernel app, if everything is alright you can after modify this file)
The second section is about wacom pen, choose the sampling rate you prefe: higher means more smoothness, but possible higher battery consumption
Last section is for fast charge change the 0 in the last line with a 1 to get fast charge enabled at each boot (you should have echo 1 > /sys/kernel/fast_charge/fast_charge)
This is just for omni Rom correct? I rub carbon rom but I'd like to try it.
Sent from my Note 3's big ass screen
smuvman said:
This is just for omni Rom correct? I rub carbon rom but I'd like to try it.
Sent from my Note 3's big ass screen
Click to expand...
Click to collapse
I haven't got time to try on other roms but should work with every AOSP based (like Carbon). You can always try it just flash in recovery: if the boot is ok then it's working, if you got a bootloop you can go to recovery and reflash the whole rom without wiping so you won't lose your data (I think doing a backup is better, just in case)
I can confirm the kernel works on Carbon Rom.. Underclocking works great... I don't overclock though.. Thanks for compiling this for us!
Thanks for taking the time to create it and thanks nerdy for testing
Sent from my Note 2's big ass screen
Unfortunately can't get it to run. Keep getting this fc error.
Running latest carbon rom. I'll wait for the next version. Thanks though. Btw I have the N8013
Sent from my Note 3's big ass screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
smuvman said:
Unfortunately can't get it to run. Keep getting this fc error.
Running latest carbon rom. I'll wait for the next version. Thanks though. Btw I have the N8013
Sent from my Note 3's big ass screen
View attachment 2950595
Click to expand...
Click to collapse
Phone fc is quite strange since you are using a n8013 which don't have a modem. In n801x version of the kernel isn't included the modem driver, so this is the cause of that force close IMHO. You can try two things:
Go to settings-> apps-> all-> dialer-> disable -> reboot and check (now phone app is disabled so it shouldn't crash since is not running)
Or download and flash n8000 kernel. (with the modem drivers so the process can't complain anymore)
I have a N8013 as well.. I didn't get any force closes.. I uninstall all system apps I don't use, the dialer being one of them.. I flashed thru TWRP.. Hope you get it working
Ok that would make sense since I never uninstalled the dialer app. Never needed to lol I will try and report back. Thanks.
Sent from my Note 3's big ass screen
Yea! That did the trick! Thanks guys. Now to tweak!
Sent from my Note 10.1 aka my Mobile Porn Storage Unit
Way to go Marco!! Downloaded and flashed!
Unfortunately this doesn't work on CM11. Tested, and android.phone FCs. :/
Spectral1991 said:
Unfortunately this doesn't work on CM11. Tested, and android.phone FCs. :/
Click to expand...
Click to collapse
If you're using n801x check post #9 http://forum.xda-developers.com/showpost.php?p=55679855&postcount=9
marco9333 said:
If you're using n801x check post #9 http://forum.xda-developers.com/showpost.php?p=55679855&postcount=9
Click to expand...
Click to collapse
I'm using n8000. Tried flashing the related kernel file as well. Still not working on latest CM11.
Spectral1991 said:
I'm using n8000. Tried flashing the related kernel file as well. Still not working on latest CM11.
Click to expand...
Click to collapse
Have you tried to clean Dialer data??
marco9333 said:
Have you tried to clean Dialer data??
Click to expand...
Click to collapse
Couldn't even get there. The FCs happen too quickly. After closing a dialog it immediately appears.
When the message appear do not close the dialog but try to pull down the quicksettings and go to settings from there... If this won't work I'll add a script to kernel zip to clean dialer data (if possible) so you can easily flash directly without further actions
Sent from my Nexus 5 using XDA Free mobile app
Thanks for this Marco, it works great here- Omnirom on a n8013. :good:
Is there any chance you might take over the omnirom development now that iofthestorm is out of the loop? He mentioned he was up for helping someone who was willing to continue the work on it.
Based on Samsung Official source
Thanks to UpInThAir for his work on the S tablet. Most of his stuff is ported from his git.
I changed some stuff to make it work on our Tablet and I added some stuff.
CivZ-P900 Lollipop Kernel Download Folder.
Stock lollipop kernel
KERNEL FEATURES source.
Install with custom recovery
[*]KNOX removed (container service, SecureStorage)
[*]SELINUX protection included but set at Permissive = No problems wit apps like Paragon and Titainium. and Viper4Android.
When you want to use Viper4Android you must block/disable the Samsung default player and block/disable the SoundAlive app
[*]INIT.D Support
[*]ARCH controllable
[*]SPen BOOSTER CONTROL @ bonuzzz
[*]INTERNAL & MEMORY VOLTAGE CONTROL @ Andreilux & halaszk
[*]MEMORY Frequency up to 933MHz
[*]OVERCLOCKING & VOLTAGE CONTROL CPU & GPU @ Andreilux & halaszk (CPU:200MHz up to 21000MHz / GPU: up to 677MHz)
[*]BFQ SCHEDULER ADDED
[*]WOLFSON DAC SOUND CONTROL ( Speaker and Headphone equalizer) @ Andreilux & oloendithias
[*]DYNAMIC READ AHEAD
[*]SAMSUNG DYNAMIC HOTPLUG CONTROL @ oloendithias
[*]EXTRA TCP WIFI CONNECTION OPTIONS
[*]SCREEN mDnie control @ Andreilux & Xluco
[*]NTFS READ WRITE SUPPORT (with paragon)
[*]WQ_POWER_EFFICIENT
[*]COMPILED WITH GCC 4.8 Google
[*]Frandom
[*]GPU Qos control, added control in synapse @ UpInTheAir
Extra Driver (device) support compared to the default kernel
[*]HID_LOGITECH/LOGIRUMBLEPAD2/LOGIWHEELS/HID_WIIMOTE/HID_WIIMOTE_EXT/XBOX_PAD/............
[*]USB_DUN_SUPPORT
[*]USB_OTG
[*]CIFS
[*]FULL CONTROL WITH SYNAPSE APP (Thanks to Andreilux for the app and UpInTheAir for most of the layout)
Some screens of the Synapse:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[*]etc.........
Changelog KERNEL:
16/07/2015 Rev1.1 Released
16/07/2015 Rev1.2 Released
Update GPU mif /int
Rev1.5 Released 03/sept/2015
Frandom added
Crypto Neon support added
L2TP support activated in the kernel
Compiled on GCC 4.8 Linaro
Writeback support added for smoothness
etc.........
Rev1.6 Released 05/sept/2015
Not released as this was tester.
Rev1.7 Released 05/sept/2015
Clean start from Latest Samsung source
Aim is stability
Powersuspend, Dynamic Fsync and DynamicWriteback removed as they are experimental.
Switched back to the stable GCC 4.7.4 Linaro
VPN bug fixed (tested myself with different VPN providers in system settings of the rom and not a app from the Playstore)
etc.........
Rev1.8 Released 07/sept/2015
Changed some GPU settings for the flickering problem on High CPU load and low battery.
SWAP READAHEAD
ZSWAP WRITEBACK
WQ_POWER_EFFICIENT
COMPILED WITH GCC 4.8 Google
Extra Driver (device) support compared to the default kernel
BRIDGE_NETFILTER
L2TP_V3 & L2TP_IP & L2TP_ETH & PPPOL2TP
CAIF & CAIF_USB
USB_NET_DM9601
DVB_CORE & DVB_NET &DVB_CAPTURE_DRIVERS DVB_STB0899/DVB_STB6100/DVB_STV090x/DVB_STV6110x/..............
HID_PID & USB_HIDDEV
HID_LOGITECH/LOGIRUMBLEPAD2/LOGIWHEELS/HID_WIIMOTE/HID_WIIMOTE_EXT/XBOX_PAD/............
USB_ACM
USB_WDM
USB_STORAGE_REALTEK
USB_DUN_SUPPORT
USB_OTG
USB_MICROTEK
MEMSTICK_SONY
CIFS
HFS_FS
HFSPLUS_FS
BFS_FS
UFS_FS
etc.........
Rev2.0 Released 22/okt/2015
Updated to H4 source & ramdisk
Reverted memory control
XDA:DevDB Information
CivZ_P900_Lollipop Kernel, Kernel for the Samsung Galaxy Note Pro 12.2
Contributors
civato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Rev1.1
Stable Release Date: 2015-07-16
Current Beta Version: Rev1.0
Created 2015-07-16
Last Updated 2015-10-22
Thank you
Sent from my SM-G925T using Tapatalk
Yay viper works again thx again
Sent from my SM-G925T using Tapatalk
Love the rom... however I get a "No UCI support detected" message when synapse starts up
...
Thanks again for your hard work!!!
morpheousrx said:
Love the rom... however I get a "No UCI support detected" message when synapse starts up
...
Thanks again for your hard work!!!
Click to expand...
Click to collapse
The rom @civato made does not come with this kernel. You will not be able to use Synapse until you flash this kernel.
I guess this is only working for P900, not P905?
StigOE said:
I guess this is only working for P900, not P905?
Click to expand...
Click to collapse
It is stated that way in the OP.
Civato,
Thanks for this great kernel and hard work! Installed on my rooted P900 and works so far great. AND it fixes the BT issue with the Logitech keyboard.
Yes. Civato amazing work, logitech keyboard working great with this!
Yes this kernel fix the Bluetooth Problem.
Hi Guys,
Can someone help with a quick install steps list for newbie like me from stock tablet?
I've downloaded both the kernel and source file and put them in the SD card.
I've started under custom recovery mode and selected update from external storage in the menu, and run it for both file but I've got nothing different afterwards and still the famous Bluetooth issue.
Thanks in advance
Cheers
Rev1.7 Released 05/sept/2015
Clean start from Latest Samsung source
Aim is stability
Powersuspend, Dynamic Fsync and DynamicWriteback removed as they are experimental.
Switched back to the stable GCC 4.7.4 Linaro
VPN bug fixed (tested myself with different VPN providers in system settings of the rom)
etc.........
civato said:
Rev1.7 Released 05/sept/2015
* Clean start from Latest Samsung source
* Aim is stability
* Powersuspend, Dynamic Fsync and DynamicWriteback removed as they are experimental.
* Switched back to the stable GCC 4.7.4 Linaro
* VPN bug fixed (tested myself with different VPN providers in system settings of the rom)
* etc.........
Click to expand...
Click to collapse
When you say "Clean start from Latest Samsung source" do you mean the latest 5.0.2 rom P900UEU1COH2_P900XAR1COH2_XAR? Or is this something else entirely? Thank you.
FlyingHorseGA said:
When you say "Clean start from Latest Samsung source" do you mean the latest 5.0.2 rom P900UEU1COH2_P900XAR1COH2_XAR? Or is this something else entirely? Thank you.
Click to expand...
Click to collapse
No you are talking about a rom release, This is a kernel release, those sources you download from a other place.
With custom Kernel I had screen flickering under huge CPU load and low battery, so switched back to custom kernel.
Sry
sent from my NotePro via Tapatalk
Rev1.8 Released 07/sept/2015
Rev1.8 Released 07/sept/2015
Changed some GPU settings for the flickering problem on High CPU load and low battery.
SWAP READAHEAD
ZSWAP WRITEBACK
WQ_POWER_EFFICIENT
COMPILED WITH GCC 4.8 Google
Extra Driver (device) support compared to the default kernel
BRIDGE_NETFILTER
L2TP_V3 & L2TP_IP & L2TP_ETH & PPPOL2TP
CAIF & CAIF_USB
USB_NET_DM9601
DVB_CORE & DVB_NET &DVB_CAPTURE_DRIVERS DVB_STB0899/DVB_STB6100/DVB_STV090x/DVB_STV6110x/..............
HID_PID & USB_HIDDEV
HID_LOGITECH/LOGIRUMBLEPAD2/LOGIWHEELS/HID_WIIMOTE/HID_WIIMOTE_EXT/XBOX_PAD/............
USB_ACM
USB_WDM
USB_STORAGE_REALTEK
USB_DUN_SUPPORT
USB_OTG
USB_MICROTEK
MEMSTICK_SONY
CIFS
HFS_FS
HFSPLUS_FS
BFS_FS
UFS_FS
etc.........
civato said:
Rev1.8 Released 07/sept/2015
Changed some GPU settings for the flickering problem on High CPU load and low battery.
SWAP READAHEAD
ZSWAP WRITEBACK
WQ_POWER_EFFICIENT
COMPILED WITH GCC 4.8 Google
Extra Driver (device) support compared to the default kernel
BRIDGE_NETFILTER
L2TP_V3 & L2TP_IP & L2TP_ETH & PPPOL2TP
CAIF & CAIF_USB
USB_NET_DM9601
DVB_CORE & DVB_NET &DVB_CAPTURE_DRIVERS DVB_STB0899/DVB_STB6100/DVB_STV090x/DVB_STV6110x/..............
HID_PID & USB_HIDDEV
HID_LOGITECH/LOGIRUMBLEPAD2/LOGIWHEELS/HID_WIIMOTE/HID_WIIMOTE_EXT/XBOX_PAD/............
USB_ACM
USB_WDM
USB_STORAGE_REALTEK
USB_DUN_SUPPORT
USB_OTG
USB_MICROTEK
MEMSTICK_SONY
CIFS
HFS_FS
HFSPLUS_FS
BFS_FS
UFS_FS
etc.........
Click to expand...
Click to collapse
Civato can this be dirty flashed over 1.5
Now I'm on 1.8
Everything seems fine. No flickering so far, but with nearly 90% battery. [emoji106]
I will send more feedback this evening with less battery
Nice work! Special THX for fast fix!
sent from my NotePro via Tapatalk
Criminal23 said:
With custom Kernel I had screen flickering under huge CPU load and low battery, so switched back to custom kernel.
Sry
sent from my NotePro via Tapatalk
Click to expand...
Click to collapse
What do you mean by screen flickering? Does the screen actually shut down and (then) you have to (manually) switch it on?
Also since custom kernel created the issue to you, why did you "switch back to custom kernel"?
Stevethegreat said:
What do you mean by screen flickering? Does the screen actually shut down and (then) you have to (manually) switch it on?
Also since custom kernel created the issue to you, why did you "switch back to custom kernel"?
Click to expand...
Click to collapse
No, I don't must switch on manually.
The screen flickers an half second to black and comes back from self -> it flickers
With stock Kernel and also with 1.8 Kernel the problem is gone.
Tested yesterday with 15% Accu. Everything is fine now. [emoji106]
Edit: I mean "switching back to stiock Kernel" sry for irritations [emoji6]
sent from my amazing SGS5 via Tapatalk