Related
Hi,
I decided to post here two kernel updates I mainly use or have used on my Legend. They are nothing special (not overclocked), with several additions and changes, just something I want to share with the Legend scene. They corespond to two different (stock) extraversions:
2.6.29-5f084974
Based on stock HTC kernel version 13be9c9c available from their Developer Center. The kernel is perflocked by default (123-246 MHz screen OFF , 246-600 MHz screen ON, 123-600 MHz scaling for ondemand governor). Modules (drivers) included:
aufs.ko (overlay file system driver)
cifs.ko (CIFS file system driver)
cpufreq_conservative.ko (conservative scaling governor)
cpufreq_interactive.ko (interactive scaling governor)
cpufreq_powersave.ko (powersave scaling governor)
lzo_compress.ko (lzo compressor)
lzo_decompress.ko (lzo decompressor)
perflock_disable.ko (forcibly disables perflock)
ramzswap.ko (Compcache driver)
sdio.ko (TI SDIO driver)
squashfs.ko (SQUASHFS 4 file system driver)
tiwlan_drv.ko (TI Wlan driver)
tun.ko (TUN/TAP driver)
ext4.ko (ext4 file system driver)
jbd2.ko (ext4 dependency)
lockd.ko (NFS)
nfs.ko (NFS)
sunrpc.ko (NFS)
2.6.29-8d705e0d
Based on CM's 2.6.29.6 GIT with some additions from Alex's GIT. Specs are the same as for above version.
UTF-8
As an option, I also prepared two kernels same as above but with UTF-8 NLS support set as default.
Installation
Just flash the update via ClockworkMod... it will run over your previous kernel and modules.
Note
These kernels are ment for those using stock based ROMs (like chefs using stock ROMs as a base) and are missing support for things mentioned above (nfs, aufs, cifs, tun, interactive governor...). Those using CM based ROMs don't need any of these... CM already has kernel with all support mentioned above.
Warning!!!
Please read the whole post before you download (it's really not so long)! Do not apply these updates if you don't know what they actually do!
Hello,
this one : 2.6.29-8d705e0d doesn't work with Azure Nightly 8.
The touch screen don't work !
vadatte said:
Hello,
this one : 2.6.29-8d705e0d doesn't work with Azure Nightly 8.
The touch screen don't work !
Click to expand...
Click to collapse
Build 8 quite bogus, random reboots and non working TTS
have you tried with build 7?
I have similar problem with Azure Nightly 7 and Kernel 2.6.29-8d705e0d
Touch screen don't work !
Probably I should've mentioned that these kernels have been primarily ment for stock based ROMs.
I don't get it guys... I believe I mentioned in 1st post that second kernel is based on CM's so why would one ever want to us my kernel with CM... CM already has the right kernel with all the modules and statically built support for anything I mentioned above.
If you guys are trying nightlies expect problems but most important learn how to debug them. If you just write that it doesn't work, you basically did nothing to help solving the problem or improving things.
One more thing... did you guys try dumfaq's OC kernels with those CM nightlies?
Sent from my HTC Legend using XDA App
BlaY0 said:
If you just write that it doesn't work, you basically did nothing to help solving the problem or improving things.
One more thing... did you guys try dumfaq's OC kernels with those CM nightlies?
Click to expand...
Click to collapse
With Azure Nightly 7 the phone starts correctly, I can not use the touch screen (it's impossible to navigate with my fingers )
And no I don't try dumfaq's OC kernels with cyano nightlies.
I would like to say something:
If you don't have any idea what these kernels actually change, then don't use them. There's no point in going "Duuh, BlaYo made a kernel, it must be awesome! I'll use it", when you don't know the advantages of using them. This kind of thing goes for a lot of stuff on these forums. If you don't understand what it does, or if you wouldn't know where to start with debugging errors, then either don't use it, or do research and make an informed decision on whether you actually need it.
And this goes for yez nightly users, too: nightly builds are almost never better than the stable. If you want CM, use Azure, not the nightlies. Unless of course your doing real testing, debugging and then feeding it back to CM developers.
Exactly!
Sent from my HTC Legend using XDA App
BlaY0 said:
Exactly!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
We live and learn.
Request: nls_utf8 module please.
Hello BlaY0, Thank you for you posting the kernel.
I am enjoying cifs with your 2.6.29-5f084974 on Azure, thank you!
Would you please add one more module "nls_utf8"? This helps converting filenames written in lot of languages other than English.
That can be arranged. But I have a question for you. What's keeping you from compiling it yourself? Since you know what those modules are for, I'd suspect you have done it before... at least for x86 architecture?
Thank you for your reply!
I am sorry, I've not tried it yet, only read FAQ #2 in "CifsManager" created by f3d0r.
forum.xda-developers.com/showthread.php?t=756158
Q: I mounted my favorite share successfully but files with special characters are not displayed correctly.
A: Try to use a kernel with explicit UTF-8 support or try to find/load the kernel module nls_utf8.ko via a simple init script.
Click to expand...
Click to collapse
May I try it with your help?
Hi BlaY0, please hold my request.
I found your message at "[Q] Custom Kernel" thread. I will try by myself with kyosa's config. Thank you!
Check this one too...
I added nfs support to 1st one and ext4 to both. I also prepared optional kernels (same versions) with UTF-8 NLS support set as default.
My two cents:
For a few of these it doesn't really make sense to compile them as modules. tun, lzo, utf_nls don't really bloat the kernel or negatively affect performance for example.
I know... I just put them here because you can freely extract them and use them with plain (not modified) stock kernel. That's why I'm using stock kernel extraversions and not my own.
As for NLS it is already statically compiled (not as modules) in those two kernels...
Hi BlaYo, Thank you for your new kernels! "5f084974" kernel and modules worked perfectly with Azure1.01! I can now read any filenames on my file server. I am so happy!!
Ah-- Yes, last weekend I gave up. I could not make wifi active...
(Of course, I re-compiled tiwlan_drv.ko) So I gratefully accept your favor.
Hello Ali ba!! Thank you, I found "nls_utf8" was already enabled in your nightly build. (I saw in config.gz) I am sorry I've not test them yet. I will test and report about this!
All,
I decided to create an open thread for DEV's from both XDA and Android Forums and where ever else, so we can all communicate back and forth on CM products for our phones. Since I know we have many sister phones which all basically have the same hardware I think it's time we all come together to help one another. Here is the known list of our sister phones.
- Motorola TRIUMPH
- Huawei U9000 IDEOS X6
- Viewsonic Viewpad 4
- Cherry Mobile Magnum HD A400
- Spice CSL Mi 410 - Slim
- WellcoM A99
- CSL Blueberry Mi 410
- Olive Smart VS300
- Axioo Vigo 410
- Huawei Ascend X
To start off the thread I will be answering a question from
http://forum.xda-developers.com/showpost.php?p=31460961&postcount=51
g60madman said:
X6 DEV's,
I see that rcset forked over our device files from MTDEV-CM10 right now rukin is using his own branch called rukin check in there for current updates, our main branch jellybean is still going through some growing pains. Also not sure if you guys have seen but QUALCOMM released updated egl drivers for Jelly Bean. For what it's worth I replaced all our Video drivers from QUALCOMM for CM9 with their ICS update for arm7 and it made a huge difference in performance. Our original egl drivers from CM9 came from edowar's github so it maybe worth to update all your CM9 ROM's and test that out. Just wanted to pass this on to all you devs. Since our phones are so similar I think it's worth the continued communication between devs
Click to expand...
Click to collapse
Arya_3RDNumber said:
Thanks g60madman,,thats great info for devs,,sure JB will more completely than ICS which stunning many devs
Sent from my Spice Mi-410 using Tapatalk 2
---------- Post added at 07:36 PM ---------- Previous post was at 07:35 PM ----------
Ah,,I forget something,,is proximity sensor could be fixed??need it for brightness setting
Sent from my Spice Mi-410 using Tapatalk 2
Click to expand...
Click to collapse
My pleasure
Yes our proximity sensor/light sensor seems to be working fine in CM9 for the Triumph, I have not tested this in CM10 yet. I notice it works as long as you turn it on by going to Settings < Display < Brightness and check mark "Automatic Brightness". Also while on a phone call when you pull the phone from your face the screen also turns on.
Based on edowar's github I see he is coping over the sensor file
https://github.com/edowar/android_device_fb0/blob/ICS/device_fb0.mk#L246
The other thing to look at is TickerGuy's original commit to android_frameworks_base for CM7
https://github.com/tickerguy/android_frameworks_base/commit/8e748c9a692eb82a9374af398ecea63c7b1944df
It looks like it was included in CM9 by matera
https://github.com/MTDEV-CM9R2/andr.../android/server/PowerManagerService.java#L315
Also the other thing you may need to do is hack on the kernel as well, here is Tickerguy's original commits for light sensor and changing the LUX values to handle the difference in direct sunlight outdoors and also the lower light of being inside.
https://github.com/tickerguy/WX_435_Kernel-Tickerguy/commit/cc6431239094150c6d4d854afcb47ff5a4c19d7c
These changes have also been included in our 2.6.32.59 kernel which Mantera patched for CM9/CM10
https://github.com/MTDEV-CM9/MTDEV-KERNEL-CM9/blob/ics/drivers/i2c/chips/ltr502als.c
As for the proximity sensor not working while on a phone call I patched this in our CM7 Kernel 2.6.32.9 from mantera
[urlhttps://github.com/MTDEV-KERNEL/MTDEV-KERNEL-CM7/commit/96f11d9478c8043095a8b77e20414d91dd2742ce[/url]
This is also patched in our current ICS kernel as well 2.6.32.59
https://github.com/MTDEV-KERNEL/MTDEV-KERNEL-CM9/blob/ics/drivers/input/evdev.c
If you have any other questions please feel free to use the thread
good to see triumph developer in here,,
i don't know there is will be a problem or not when triumph still using .32 kernel base and our gsm phone using .35 kernel in almost our lattest rom.. even we know our diferent is just in ril libs.. may be you can try to compile .35 kernel for triumph from TJ or EDOWAR source.. but you have to port andro-id rc3.nb0 first as base..
Sent from my FIH-FB0 using xda
Good day FIH-FB0 devs Sir g60 and Sir aben.
It seems like this is the first time the head devs of the GSM and CDMA units of FB0 come in contact.
Maybe you two should communicate often, but so as not to infringe your right of choice you are free to do otherwise. Just an unsolicited suggestion anyway.
I just would like to ask what is hacking a kernel, or parts of it, in the context of sir g60's post above?
I would like to compile kernels too.
Thanks.
(⊙o⊙)
---------- Post added at 12:34 PM ---------- Previous post was at 12:25 PM ----------
um, one more thing.
i think, in the spirit of a formidable alliance between GSM and CDMA devs, we should first be unanimous on what kernel version to put forward.
There are only two choices at the moment:
a. 2.6.32
b. 2.6.35
As the two of you are head devs, i would like to suggest that you two make a decision on this matter, but again feel free to do otherwise.
Thanks.
^▁^
abenagiel said:
good to see triumph developer in here,,
i don't know there is will be a problem or not when triumph still using .32 kernel base and our gsm phone using .35 kernel in almost our lattest rom.. even we know our diferent is just in ril libs.. may be you can try to compile .35 kernel for triumph from TJ or EDOWAR source.. but you have to port andro-id rc3.nb0 first as base..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
abenagiel, yes we have been working on the kernel source. Mantera was able to get it to boot once but as of right now it's not working. I updated all our kernel sources and newly modified build script today and set it up under a new organization https://github.com/MTDEV-KERNEL/
aeoi said:
Good day FIH-FB0 devs Sir g60 and Sir aben.
I just would like to ask what is hacking a kernel, or parts of it, in the context of sir g60's post above?
I would like to compile kernels too.
Thanks.
Click to expand...
Click to collapse
If you would like to get involved in modifying your kernel we have some instructions on setting up your build environment using Linux 10.04 at http://mtdev.us in the wiki area. Also you can download the build kernel script we have created at https://github.com/MTDEV-KERNEL/MTDEV-BUILD-KERNEL and then you can download your kernel by tjsyte at https://github.com/tjstyle/android_kernel_fih_msm7x30. Make sure to read the instructions in the README as you will need the config in the kernel directory.
Thanks sir g60.
^▁^
I thinks g60madman you only should port recovery V5.0.0.2.7 when you want to use kernal V.35..
Man I wonder if that all it is. I will check this out tonight!
Sent from my Nexus 7 using Tapatalk 2
g60madman said:
Man I wonder if that all it is. I will check this out tonight!
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Gud luck man,hope you will get it...
GPS?
elol said:
Gud luck man,hope you will get it...
Click to expand...
Click to collapse
elol,
How is the overal GPS lock speed on CM9? I was checking some permissions and I simply guessing, however I assume your GPS locks are really slow or non existent? Let me know as I may have a fix for you guys.
g60madman said:
elol,
How is the overal GPS lock speed on CM9? I was checking some permissions and I simply guessing, however I assume your GPS locks are really slow or non existent? Let me know as I may have a fix for you guys.
Click to expand...
Click to collapse
Bro GPS get locked very smoothly over all CM9 rom without an issue.... thanks for the offered help
vivekb said:
Bro GPS get locked very smoothly over all CM9 rom without an issue.... thanks for the offered help
Click to expand...
Click to collapse
Just a hunch, was looking at your permissions for the kernel and while gps works for you, when we made changes based on your kernel permissions our GPS stopped working.
Sent from my Nexus 7 using Tapatalk 2
g60madman said:
elol,
How is the overal GPS lock speed on CM9? I was checking some permissions and I simply guessing, however I assume your GPS locks are really slow or non existent? Let me know as I may have a fix for you guys.
Click to expand...
Click to collapse
See this link myb this will help you..
http://forum.xda-developers.com/showthread.php?t=1266525
elol said:
See this link myb this will help you..
http://forum.xda-developers.com/showthread.php?t=1266525
Click to expand...
Click to collapse
Thanks elol I sent this to my other team member that has been fixing gps.
HEX-RAYS
Dev's I wanted to share a tool that has been helping us a bunch lately that I found here on xda
http://www.hex-rays.com/products/ida/support/download_demo.shtml
This tool allows you load lib files and finds which files should be associated with it. Recently in making changes to our CM7 ROM we have increased our egl from 11fps to 19fps by using the Sharp Gingerbread libs. Prior to this tool we where never able to use these libs as we didn't know which libs where dependent on others. Anyways I wanted to pass this along. Also while this it's listed as a demo version the demo portion only works on ARM technology so for us developers of Android this is basically a full version for us! It's nice to know that sometimes open source gets a break :laugh:
CM9 Major Improvements!
Dev's,
I have added in the Code Aurora Qualcomm libs which I found from TwistedUmbrella and also Lloir's git hubs. Here is the commit I added
https://github.com/MTDEV-CM9/vendor/commit/0970ca0a148088ffcb945549689d7cc317ebedbe
Disregard the first four files of the commit as they are Triumph specific files.
cm/prebuilt/common/bootanimation/vertical-480x800.zip - CM10 Boot animation
motorola/triumph/proprietary/hostapd - Triumph specific file
motorola/triumph/proprietary/hostapd_cli - Triumph specific file
motorola/triumph/proprietary/sensors.triumph.so - Triumph specific file
The remaining code, and lib's should do wonders for your CM9 ROM and really give it a face lift in terms of speed and overall performance!!!
g60madman said:
Dev's,
I have added in the Code Aurora Qualcomm libs which I found from TwistedUmbrella and also Lloir's git hubs. Here is the commit I added
https://github.com/MTDEV-CM9/vendor/commit/0970ca0a148088ffcb945549689d7cc317ebedbe
Disregard the first four files of the commit as they are Triumph specific files.
cm/prebuilt/common/bootanimation/vertical-480x800.zip - CM10 Boot animation
motorola/triumph/proprietary/hostapd - Triumph specific file
motorola/triumph/proprietary/hostapd_cli - Triumph specific file
motorola/triumph/proprietary/sensors.triumph.so - Triumph specific file
The remaining code, and lib's should do wonders for your CM9 ROM and really give it a face lift in terms of speed and overall performance!!!
Click to expand...
Click to collapse
thanks man.. i will take alook the commit,,
#oh its 3.30am on my country,, i'm very sleepy
Question
Hi to all
I have downloaded the 20121013 CM9 rom for motorola triumph.
Can I just replace the lib files of any of our cm9 roms from MT rom to improve performance.
If it is possible, which are the main lib files which I should replace?
Please help
If you look at the GitHub link I posted all the files are in the system folder. You can download the zip from GitHub and pull out all the files you need. If look at this file it will tell you which files you need and what folder they go into.
https://github.com/MTDEV-CM9/vendor/commit/0970ca0a148088ffcb945549689d7cc317ebedbe#L43R185
The way to read the XML is after the : it will tell you the folder
:/system/etc/firmware/a225_pfp.fw
So that says a22_pfp. fw goes in system/etc/firmware.
If you have further questions please feel free to post
Wi-Fi Hidden Network?
I was going to ask, do you guys have any issues with connecting to hidden networks with Wi-Fi? Just wanted to check, as I added in edowar's updated wi-fi settings and I can not connect to hidden wi-fi, just wanted to check.
i've managed to track down a custom rom (didnt care for it) for my mid7048 and am currently working on my own based off the stock rom. But, the kernel that comes stock does not allow charging through the usb port (i know i know) the custome one does but is in the zip. My question is what would be the file name of the kernel? Also, how would i go about adding overclocking? Any help would be appreaciated and credits would be given. This is a great littletablet but has seen next to no development.
Thanks in advance.
Sent from my MID7048 using xda premium
Brother , copy BOOT.IMG and modules (if exists) from custom kernel .zip file and i know nothing about overclocking of a kernel .
Good luck
DONT FORGET TO PRESS THANKS BUTTON ,if I had helped you a bit
Click to expand...
Click to collapse
Hi Guys,
I have managed to compile our ICS kernel with Linaro 4.7 and make it bootable after too much trouble.....
The kernel is compiled with o3 optimization
Toolchain used from made by Christopher83
http://forum.xda-developers.com/showthread.php?t=2098133
The kernel is tested with Nooby's v30b repack....
The kernel is build from original source i.e it has the first LED not working issue during Boot....
I would like to hear if there's any improvements or its just the same....
It was learning experience for me build a kernel .....
I do not guarantee of providing timely improvements or etc
I do not have a github etc...
can someone help me with that....i want to start it from zero ....with original source and will put patches on it...
I am attaching the patch as a zip file,..is a normal zip file with all the code necessary to compile the kernel with linaro,,,
it also has code of rmcc patch
O3 and linaro equals hard to debug bugs and no performance improvements.
Can you make one kernel for ligux rom?
Enviado desde mi Optimus Black
dflt said:
O3 and linaro equals hard to debug bugs and no performance improvements.
Click to expand...
Click to collapse
The O3 flag would not give much improvement over the O2 flag as the optimizations that are brought in are only applicable in a few places and the kernel isn't that computation heavy. I still want to see a O2 and Os comparison, but I don't have time to waste on things like that these days.
As for different tool chains. I have seen a benchmark sometime ago with different kernels compiled with different toolchains. The difference was marginal and seemed to differ with kernels as well as toolchains (Some toolchains just like and dislike some kernels) . Overall Code Sourcery's toolchain did best on average I think.
Post a source, otherwise this thread will be closed. You can use my guide to learn how to do that.
eagleeyetom said:
Post a source, otherwise this thread will be closed. You can use my guide to learn how to do that.
Click to expand...
Click to collapse
I was actually waiting for user replies ..but it seems no one is using my kernel...
Also i am actually busy for some time....will be providing the source either in a zip or setup a git by following your guide
AW: v30c Kernel Compiled with Linaro
eagleeyetom said:
Post a source, otherwise this thread will be closed. You can use my guide to learn how to do that.
Click to expand...
Click to collapse
Just give him some time it's always hard, when you are new to a subject... and hey, if you provide some benchmarks and further improvements, why should noone wanna use it?
Sent from my LG-P970 using xda app-developers app
Hi guys i have provided the patch to compile kernel with linaro in my OP....
regarding performance i didn't observe anything...
2days ago i officially updated my phone from 2.2 to 4.0 v30c because i wanted all my apps preserved.....
and today i experience sdcard unmount....i didnt experience it with my kernel and nooby v30b repack...maybe because i had i freshly installed...not sure....
i have not yet tried my kernel with v30c....because i have yet to patch the bootlaoader and install cwm...as per another threads to do this,,,maybe i will plan to
do this this weekend,,,,
Oh ...i got my phone reset when did reboot in recovery without any recovery with anreboot...and lost all my phone data....all efforts gone to wain...now i have to root and install apps again
Also my ICS version show 30C-SEA and i am from India...
I flashed official v30c and experienc ed sd card unmount. ..then installed v30b unlocked loader ...then installed my kernel and have been testing it....no sd unmount and also frontkey leds works according to settings done.....
Those who still have unmount problem can try my kernel in OP if you are using v20 bootloader. ..and those who use unlocked v30 unlocked bootloader dont use the Kernel attached in OP otherwise bootloop..just reply to me and I will attach the new one....
Sent from my LG-P970 using xda app-developers app
Have some view in attached file but no feedback
Thanks for your work, but I think everybody here need a optimize kernel, because, you know, the stock kernel isn't enough good
no14me said:
Have some view in attached file but no feedback
Click to expand...
Click to collapse
What u want to say???
no14me said:
Thanks for your work, but I think everybody here need a optimize kernel, because, you know, the stock kernel isn't enough good
Click to expand...
Click to collapse
I don't think there's any kernel fully optimized yet..
I asked only for those who get sd unmount to try my kernel. ..no one is forced to use it....
Sent from my LG-P970 using xda app-developers app
rajeshmk2012 said:
What u want to say???
I don't think there's any kernel fully optimized yet..
I asked only for those who get sd unmount to try my kernel. ..no one is forced to use it....
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Just give a try with French v30C's kernel. They fixed ondemand gov. and there isn't any sd unmounting. I'm using it since it went out and hadn't any problems.
Enviado desde mi LG-P970 usando Tapatalk 2
rajeshmk2012 said:
What u want to say???
I don't think there's any kernel fully optimized yet..
I asked only for those who get sd unmount to try my kernel. ..no one is forced to use it....
Click to expand...
Click to collapse
I see a attached file have some download, but no one give the feedback that with your kernel is the sd fixed or not. Because I don't have that issue.
About the optimization, just is my suggestion
diazao said:
Just give a try with French v30C's kernel. They fixed ondemand gov. and there isn't any sd unmounting. I'm using it since it went out and hadn't any problems.
Click to expand...
Click to collapse
+1.
I just got sd unmount with my kernel after a week's use....
I will wait for v30d sources
Sent from my LG-P970 using xda app-developers app
Hi,
wer can i find the Adagio Kernel? the link in the first post seem to doesn't work
thanks
I dont want to interrupt your hard work but look here, may find something interesting (google translator needed) :-
http://lg-p970-shuajibao.shuajizhijia.net/
There are monthly updated ROMs and Kernels, you might be interested in.
Due to very little internet package I cant test them. If you find any ROM/Kernel useful please inform us all.
Q&A for [kernel] F_kernel 4.4.x ROMs NO F2FS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [kernel] F_kernel 4.4.x ROMs NO F2FS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi Fred,
only one information for you. Your kernel 1.2.3 work great with 1200 MHz and SlimKat. Please don't stop development! There are any people who are using SlimKat and Oc-Kernel! And only with your kernel bluetooth work.
Greetings from Germany
K.
Thanks
hi Fred,
thank you for your kernel.
so far so good for me.
CyanogenMod S3 Mini by NovaFusion with F_Kernel 1.2.3 (I'm looking for the swap feature)
EDIT: USB tether not working. and can't connect device to PC as mass storage (only charging).
_Kosmas_ said:
Hi Fred,
only one information for you. Your kernel 1.2.3 work great with 1200 MHz and SlimKat. Please don't stop development! There are any people who are using SlimKat and Oc-Kernel! And only with your kernel bluetooth work.
Greetings from Germany
K.
Click to expand...
Click to collapse
hello,
I do not intend to stop development but version 1.2.3 works good
I just make a 1.2.4 version with just added patch Lockscreennotification and golden-guys RTC kernel changes
Arusar said:
hi Fred,
thank you for your kernel.
so far so good for me.
CyanogenMod S3 Mini by NovaFusion with F_Kernel 1.2.3 (I'm looking for the swap feature)
EDIT: USB tether not working. and can't connect device to PC as mass storage (only charging).
Click to expand...
Click to collapse
Thank you for report,
the swap not work apparently since v1.2. In 1.1 is ok
However, I currently do not know what is the cause of this problem.
For USB tether, work on OmniRom and work probably on slimkat (by android-andy) because the basic kernel is by OlivierG96 in these two ROMs
in CyanogenMod and other ROM the base of kernel is by Novafusion and not work exactly same, So is this can be the cause of these disorders.
Fred6681 said:
hello,
Thank you for report,
the swap not work apparently since v1.2. In 1.1 is ok
However, I currently do not know what is the cause of this problem.
For USB tether, work on OmniRom and work probably on slimkat (by android-andy) because the basic kernel is by OlivierG96 in these two ROMs
in CyanogenMod and other ROM the base of kernel is by Novafusion and not work exactly same, So is this can be the cause of these disorders.
Click to expand...
Click to collapse
thanks for your response Fred
now I will try the v1.1 on CM11 NovaFusion
Hello Fred6681,
it´s possible for you to integrate the zzmoove governor in your kernel? This governor brings a lot of possibilities to save battery and have enough performance :good:. It would be a great thing for this people who need working bluetooth and used a not based ROM by NovaFusion.
Greetings and maybe thanks in advanced!
K.
_Kosmas_ said:
Hello Fred6681,
it´s possible for you to integrate the zzmoove governor in your kernel? This governor brings a lot of possibilities to save battery and have enough performance :good:. It would be a great thing for this people who need working bluetooth and used a not based ROM by NovaFusion.
Greetings and maybe thanks in advanced!
K.
Click to expand...
Click to collapse
I made , I would put has arrangement in the evening
Changelog
Thanks a lot :good:. Just download and will report
Greetings K.
Edit: I had a reboot while screen off . I will try screen off settings 200-500 MHz.
Very good job
l8190 with vanir 4.4.4 from 24.11. works perfect. 1A I like it. It works with min. 100 and max 800 perfect
greetings
update I use the zzmove with deadline on 100 and 700 Mhz. It works now almost 23 hours and save a lot of battery. Very good job. I like your kernel
GOOD job
Nice Kernel!! but i only can reach 1150Mhz hope you guys can Do some changes in voltage
Nice kernal...
galaxy i8190l problem rom
hopefully someone can help me! I am new to this and want to copy the rom gt- i8190l a phone to another. but do not know how I can do it correctly when loading the rom because I want to replace the cell does not link the change of company . . . . ie I get all logos telcel but ask me pin because the other was Iusacel
anyone can help me correct my mistake ?
I cant install NovaThor Settings! Always get the message "Aplication not instaled"
Anyone can help me with this?
Flashing Kernel
I cant install NovaThor Settings.apk, it always says aplication not installed.
I've already flashed the kernel. Anyone can help with this please?
i dont know why but everytime i install this kernel on cm11 cm12 PA CARBON im gettinh system bootup and after android is upgradin it laod up page that encryption failed reset and after resteting phone error continues
A newbie question. Must perform the wipe before flash this kernel? Use last update of SlimKat
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
Edited: sorry I forgot to quote, and double post.
Problem
Hi I want to know why not let me install this kernel 1.3 on my rom in my little SlimKat 0.9. I must make corresponding wipes? Try without wipe and will not let me install this kernel.Alguien could give me a help?
dm1980 said:
Hi I want to know why not let me install this kernel 1.3 on my rom in my little SlimKat 0.9. I must make corresponding wipes? Try without wipe and will not let me install this kernel.Alguien could give me a help?
Click to expand...
Click to collapse
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
i8190n SlimKat9.0(Android-Andi)
Fred'sKernel1.3(Fred6681) SuperSU2.46(ChainFire)
Naimlaaa said:
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
Click to expand...
Click to collapse
ok now I will try as you say me. Thank You
---------- Post added at 02:51 PM ---------- Previous post was at 02:46 PM ----------
Naimlaaa said:
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
i8190n SlimKat9.0(Android-Andi)
Fred'sKernel1.3(Fred6681) SuperSU2.46(ChainFire)
Click to expand...
Click to collapse
It differs from the mobile version? I have gt-i8190l
gacias for the help