With Mobile Odin Lite you need to flash the kernel and so it directed me to the thread on here.
So I downloaded the kernal from the thread on here and tried to Flash with Rom Manager.
But Rom Manager can't flash it because it boots into 3E recovery.
So I put the kernal on my sd card, went into 3 finger CWM recovery and tried to flash it manually. But it said installation aborted.
So is there any way I can overcome this problem? I need it, of course, to flash the ics leak today?
Thanks for any help!
Brazen9000 said:
I need it, of course, to flash the ics leak today?
Click to expand...
Click to collapse
What are you on about here? You don't need any specific kernel to be able to flash ICS. It contains its own kernel in the Rom.
However, I would advise you not to download the ICS Rom from sammobile and flash blindly, because you'll lose root (if you have it). Better to wait for one of the Devs (probably chainfire) to double-check if the already rooted ICS CF kernel can be used for the new leak or not.
More than likely, they will create a repack of the ICS Rom, containing the root kernel inside. Now, you should download this repack and flash it using Mobile Odin.
So forget about flashing any kernels in advance, just sit tight and wait.
Hope this helps.
Thanks. You can flash from Sammobile and not lose root if you use mobile odin. I'm trying to use mobile odin lite but with lite you need to flash a mobile odin kernal before you can use mobile odin. I cant flash that kernal and need help as to how as then i can flash ics without loosing root or hassle.
chasmodo said:
What are you on about here? You don't need any specific kernel to be able to flash ICS. It contains its own kernel in the Rom.
However, I would advise you not to download the ICS Rom from sammobile and flash blindly, because you'll lose root (if you have it). Better to wait for one of the Devs (probably chainfire) to double-check if the already rooted ICS CF kernel can be used for the new leak or not.
More than likely, they will create a repack of the ICS Rom, containing the root kernel inside. Now, you should download this repack and flash it using Mobile Odin.
So forget about flashing any kernels in advance, just sit tight and wait.
Hope this helps.
Click to expand...
Click to collapse
chainfire repackage the ics leak and put out the download link for it
Related
Can someone give us the instructions for flashing official ics with root access from leak ics without brick fear.? Thanks in advance
Moved To Q&A
Please post questions in the Q&A section
andreasarxon said:
Can someone give us the instructions for flashing official ics with root access from leak ics without brick fear.? Thanks in advance
Click to expand...
Click to collapse
Flash a stock GB rom with PC Odin and update OTA.
andreasarxon said:
Can someone give us the instructions for flashing official ics with root access from leak ics without brick fear.? Thanks in advance
Click to expand...
Click to collapse
You need to flash a stock Gingerbread rom from PC Odin. Then you can either wait for an official OTA update in your region, or download and flash the German ICS update that's been posted in the general section. Flash that through PC Odin. To get root, flash the LPY CF-Kernel that's in the development section. Flash the kernel through mobile odin. The lite version will work as you don't have root already and you don't need the everroot option. But I suggest you support the developer of that app, and buy the pro version, who gave you the rooted kernel in the first place
http://forum.xda-developers.com/showthread.php?t=1646023
What I recommend, based on what I did:
- Download the leaked German official ROM (about 600-700Mb), .tar.md5 file and put into your phone's sd-card.
- Install Mobile Odin Pro from Play Store (need to pay. there's free version too, but I suggest you pay for Pro, safer).
- In M. Odin, open the .tar.md5 file, and press flash. (if you don't mind wiping, best to also check the wipe options).
I didn't wipe, and then it couldn't boot.
So I booted into recovery, and wiped data/factory reset and cache, then it booted fine.
Still had root.
Then I installed CF-Kernel. Go to the Dev thread and scroll down till you see the GT...LPY version and download that zip. Unzip to take out the .tar file, copy to sd-card.
Use Mobile Odin to open it, and then flash. It will flash the kernel, and then you will have ClockworkMod recovery so that you can backup/restore ROMs again.
(Note: You can actually do the above in one single step, but opening the CF kernel file after you open the ICS file, so that everything else points to the ICS file except the kernel points to CF Kernel.)
Hit the THANKS button if this helps any of you!
Hi all, just need sme advice as I've done a lot of reding tonight but still unsure how to proceed.
I have a UK Galaxy Note, originally unlocked stock Samsung.
It currently has the original chainfire repack of the I9220 chinese leak (http://download.chainfire.eu/146/CF-Root/SGN/CF-Root-I9220_ZC_OZH_LP1-v5.2-CWM5.zip) from this thread: http://forum.xda-developers.com/showthread.php?t=1500186
I'd like to flash the official N7000OXALPY ROM on it now.
My question is, can I use mobile odin to apply the german ICS ROM directly?
I believe I may need to flash a GB ROM first? If that is the case could I do this via mobile odin?
Unfortunately I don't have a nandroid of the GB ROM i was on before to restore (I've learnt my lesson!).
Thanks!
Check this link http://forum.xda-developers.com/showthread.php?t=1535025
AND
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
Here is what i did. I flashed N7000CPWLB2--United Kingdom (Carphone Warehouse) using PC Odin, download link from http://forum.xda-developers.com/showthread.php?t=1424997. I then root and used PC Odin to flash the german ICS. I did full wipe afterwards in recovery. You don't get CMW with this approach but i don't need it.
With regards to the second link, do I have an i9220 bootloader now from the chainfire repack? (not sure how to confirm this).
I'd like to follow the instructions from dr.ketan but bit unsure if it's safe?
If you have flashed LP5 Repack then you have i9220 bootloaders ! If you have flashed the LP1 repack then you are without those bootloaders
Hackerboi, its the LP1 ROM. Does that mean I can use dr.ketans guide directly to flash the official ICS via mobile odin, or should I still flash a GB rom with odin first?
I was on TMT 1.0, what I did was flash a direct rootable ROM using PC Odin, root the ROM, flash stock LPY ROM using the instructions on http://forum.xda-developers.com/showthread.php?t=1424997 and that's it.
le3ky said:
Hackerboi, its the LP1 ROM. Does that mean I can use dr.ketans guide directly to flash the official ICS via mobile odin, or should I still flash a GB rom with odin first?
Click to expand...
Click to collapse
Flash NOTHING from Repack, be it with Mobile Odin or CWMR.
Use PC Odin to get to GB first. Then you can proceed to ICS.
http://forum.xda-developers.com/showthread.php?t=1633943
Thanks for all the help guys, successfully on the official rom now.
I did the following:
1. Flashed CPW rootable old gb rom using PC odin.
2. Rooted using zergrush
3. Flashed new ICS rom and chanfire kernel using mobile odin
le3ky said:
Thanks for all the help guys, successfully on the official rom now.
I did the following:
1. Flashed CPW rootable old gb rom using PC odin.
2. Rooted using zergrush
3. Flashed new ICS rom and chanfire kernel using mobile odin
Click to expand...
Click to collapse
Just did that exact same way myself - I always flash back to stock with PC Odin, and then re-root. Takes longer, but less hassles!
I am running stock 4.0.4 with hydracore kernel.
I am getting the OTA update but cannot install.
how can i get back to the stock kernel without flashing the stock rom via pc odin ?
You got 2 options...
1. Download the stock ROM on your PC and extract the kernel (zImage) and flash it after
2. Download Chainfire's stock CF-Root kernel from this link- http://forum.xda-developers.com/showthread.php?t=1331784 and find the kernel that matches your ROM (on your region.
nokiamodeln91 said:
I am running stock 4.0.4 with hydracore kernel.
I am getting the OTA update but cannot install.
how can i get back to the stock kernel without flashing the stock rom via pc odin ?
Click to expand...
Click to collapse
Download stock kernel for your rom from here and then flash using mobile odin or K-tools. I have done it many times using mobile odin and it even retains root.
But there is still no guarantee of OTA, I was on stock LR6 with stock kernel with mods and OTA failed everytime, now flashed GB and updating to LR6 via kies to use OTA.
letters_to_cleo said:
You got 2 options...
1. Download the stock ROM on your PC and extract the kernel (zImage) and flash it after
2. Download Chainfire's stock CF-Root kernel from this link- http://forum.xda-developers.com/showthread.php?t=1331784 and find the kernel that matches your ROM (on your region.
Click to expand...
Click to collapse
Hi,
i have the tar.md5 file on my pc.. i opened it with 7zip and i see the zimage. do i flash it in the pda tab? will it increase counter
nokiamodeln91 said:
Hi,
i have the tar.md5 file on my pc.. i opened it with 7zip and i see the zimage. do i flash it in the pda tab? will it increase counter
Click to expand...
Click to collapse
or can i flash the zimage from mobile odin?
Most often it will.. since your using PC Odin.. but there's nothing impossible as long as you root your phone back and use ChainFire's TriangleAway app to remove the counter back to 0.
EDIT: Yes, MOdin can flash Zimage as well.. try to look for some of the answers here as well -->>http://forum.xda-developers.com/showthread.php?t=1713289
Flashing anything which is stock should not raise custom count, same way as flashing stock firmware using pc odin doesn't. but why take chances when you can flash it using mobile odin or K-tools easily.
I even once flashed stock kernel using Doomlord's tool (used in CF root kernels to root and flash , it didn't raise the custom count.
Just put zimage on root of SD and flash by MO or ktools, easy. Modin can handle zimage and tar both.
jeetu1981 said:
Download stock kernel for your rom from here and then flash using mobile odin or K-tools. I have done it many times using mobile odin and it even retains root.
But there is still no guarantee of OTA, I was on stock LR6 with stock kernel with mods and OTA failed everytime, now flashed GB and updating to LR6 via kies to use OTA.
Click to expand...
Click to collapse
I used mobile odin and used the tar.md5 in kernel... flashed and it wen back to the stock kernel but the OTA still failed... then did a restore of complete rom from odin.. sacrificed root and mods.. but finally the OTA installed and happy that i did.. love the new launcher
nokiamodeln91 said:
I used mobile odin and used the tar.md5 in kernel... flashed and it wen back to the stock kernel but the OTA still failed... then did a restore of complete rom from odin.. sacrificed root and mods.. but finally the OTA installed and happy that i did.. love the new launcher
Click to expand...
Click to collapse
Yes, that's why I said no guarantee of OTA even after flashing stock kernel, I was on stock kernel already and never flashed custom but still had to flash GB from odin for OTA
I already have a custom rom installed but I'm going to sell my Note... So I want to make it official but rooted...
I cant find any thread for it. A near official rom I found is CleaNote rom but I want a fully offcial rom like on Samfirmware but rooted.
I dont want to download via samfirmware because then I will have to though whole process of rooting again and then triangle removing mod etc...
its just a one step method for rooting ics these days.
Download the rom of your choice
download philz kernel as per rom
boot into recovery
install zip
done
you have root, and cwm and safe kernel
No triangle, no counter
There is a prerooted gb rom but i dont think there is a prerooted ics cause its not safe to stay stock after you get rooted
So as nokiamodeln91 said,download a stock ics rom and flash philz kernel
Thanks guys!
I hv downloaded the Stock rom from Samfirmware in ZIP format... As my phone is rooted, can I use mobile ODIN to flash that zip and Philz Kernel OR should I use cwm recovery to flash both.... (Im asking ths bec what if the phone reboots immediately after installing rom via cwm.... it wont gimme a chance to install philz after rebooting because stock rom also installs stock kernel)
Use pc odin to install the stock rom and then philz from recovery... Or u can use mobile odin aslo. If u already rooted, mobile odin may give the option to inject su, and u may have root as well after the rom install.
cwm u can't flash stock
You cant use cwm to flash a stock rom
You can use either pc odin or mobile odin to do so
I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on LINK ....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for replying. Good to know that that thread is safe, but what do you mean by flashing a safe kernel? Those terms mean nothing to me.
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
mistajoe83 said:
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
Click to expand...
Click to collapse
tried a few usernames dint work. tried the Samsung too, na.. then nokia to the rescue.
Sent from my GT-N7000 using xda premium
mistajoe83 said:
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
Click to expand...
Click to collapse
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
hiddepolen said:
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
Click to expand...
Click to collapse
yes you can flash any ROM using ODIN safely without bricking your device.
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock to what you flashed.the kernel the firmware the csc the modem..all as stock provided....
1.If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug..
Warning :
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
let say you want to flash Latest JB Rom but you are on ICS stock.
first thing you need to do is root your device ...install CWM.. Flash safe kernel
http://forum.xda-developers.com/showthread.php?t=1329360
let say ive rooted... installed CWM with safe kernel...
what i always do is everytime i want to flash new rom whatever rom it is...i flash Speedmod 3-15 (safe kernel) and go to Advance>reboot recovery and flash any rom i want so that im on the safe side without worrying what kernel im on.
2.If you flash GB than your kernel will be GB kernel which is safe to wipe..
if you want to flash custom rom from gb then you root your device and installed CWM and Flash since GB kernel is safe.
but.. let say u flashed ICS and wanted to go back to GB. then you are not safe anymore,,, that is why i always flashed Speedmod kernel 3-15 (safe kernel) and reboot recovery (by going to advance>rebootrecovery) and flashed any rom... that way im always sure that im in safe kernel when flashing Rom
mistajoe83 said:
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock..If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug.. if you flash GB than your kernel will be GB kernel which is safe to wipe..
Click to expand...
Click to collapse
Thanks so much, you are an incredible help. Slowly, I begin to understand everything !
hiddepolen said:
I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
Click to expand...
Click to collapse
You can download any stock rom you want from searching it on the forum then you can flash it through ODIN using your computer