Related
Anyone else got this issue and is there a new bluetooth stack or something to resolve it?
When I click the answer button on any bluetooth headset (currently using the iqua solar powered one), the sound is temporarily diverted to by mobile before the bluetooth properly picks up, and also during that slugging moment, any ringtone playing is diverted to the caller's earpiece (i.e. sent out by my mic).
One caller complained it had nearly deafened them.
Anyone able to help?
Having the same issue with my parrot bluetooth and my Tilt
Can someone purrlleeeease help with this issue? I am now scared to answer any calls, lest I get shouted at with, "GOD WHAT WAS THAT NOISE? IT NEARLY DEAFENED ME!"
You really haven't give a lot of info here.
I mean what Rom are you running, what BT hardware and reg tweaks do your use etc.
Info is required to be of any assistance.
Note my signature shows exactly what Rom(s) I'm currently using.
Many thanks. Here are my versions:
HTC TyTN II
ROM: 1.0 Sleuth
ROM date: 08/28/07
Radio version: 1.27.12.11
Protocol version: 22.45.88.07H
Essentially I think a new Bluetooth stack might solve it, but I really wish to avoid losing all data by flashing a new ROM altogether.
A new Bluetooth stack on its own would be wonderful... or a way to restore my data back to a newer ROM. Would Sprite Backup do that if I use Sleuth's WM6.1 ROM?
CJSnet said:
Would Sprite Backup do that if I use Sleuth's WM6.1 ROM?
Click to expand...
Click to collapse
I know the commercial version is supposed to support "Rom Upgrade" support but I'm not sure if that is in the version that is floating around the forums.
What you can do though is make a backup prior to upgrading.
Then upgrade to test if the problem is fixed in one of WM6.1 roms.
Then downgrade and restore your back-up.
Now you will know if there is even a point to expending the effort of trying to extract the BT Stack.
Don't take offense at this next statement but if you put forth that effort it might endear someone more skilled to your cause as you've provided a "Proof of Concept" so to speak.
Okay I have just upgraded to Sleuth's v3 (WM6.1). Sadly the bluetooth issue remains, despite the new Radio version.
If someone calls, and I answer using the bluetooth headset, for 1 second their audio is output to the speaker of the Kaiser. I believe it is during that second that they also hear the end of the ring tone, which is what deafens them.
An unsatisfactory workaround is to use a quite ringtone or vibrate only, but that is hardly ideal. If anyone knows of any other solution or a bluetooth stack that is a bit snappier when answering via headset, it would be great appreciated
CJSnet said:
Okay I have just upgraded to Sleuth's v3 (WM6.1). Sadly the bluetooth issue remains, despite the new Radio version.
If someone calls, and I answer using the bluetooth headset, for 1 second their audio is output to the speaker of the Kaiser. I believe it is during that second that they also hear the end of the ring tone, which is what deafens them.
An unsatisfactory workaround is to use a quite ringtone or vibrate only, but that is hardly ideal. If anyone knows of any other solution or a bluetooth stack that is a bit snappier when answering via headset, it would be great appreciated
Click to expand...
Click to collapse
Same issue here with the same new ROM.
I'm having the same problem. When I push the button on my BT HF it gives a horrible noise to the caller at the other end for a second. In my case I doubt it is ring tone, it doesn't sound anythin like the tone I'm using, it's just like loud crackling or smth.
I can't give you any version numbers cause by TyTN II is sent off to warranty (3rd time already). This time it stopped accepting and making calls while showing 3G symbol. Previously I had band selection on auto and had no problems. Now even after hard reset no calls could be made so off it went again. The first two faults where the speaker and the "Fn" light.
I am having the same problem, the handet is at HTC's repair facility for this and a few nagging issues. I will report what they find.
Mine isn't so much the ringtone it just sounds like a loud static sound. I thought it was the headset but I tried it with 3 different headsets and the Bluethooth in my car and they all have the same problem.
Got my phone back today and I can't say I'm impressed with HTC. First they requested that I send it in the original box then must have thrown it out and sent it in some crap box without enough padding. They didn't even send a note or invoice saying what had been done, which was nothing.
They claim they couldn't find anything wrong and when I called support the guy thought it a joke.
Needless to say it is still deafening and I am pissed.
Same Issue Here... It is almost as if there is a dely in cutting off the WAV/WMA file. Bluetooth Picks up and and both parties get the end of the ring tone.
Had the issued with the origional AT&T rom
Have the issue with Slueth 3.0 and Alex 5.2
If anyone finds a fix please let me know...
I am using PhoneAlarm - Don't know if that is related.
I've had the same complaints from some of my callers, and try to answer between rings as much as possible. The complaints have gone way down. Of course, we shouldn't have to jump thru hoops to answer our phones!
Does anyone have contact info to point HTC to this worrying thread? We need a patch release ASAP. A phone that can't answer calls properly? Yikes.
No issues with my BlueAnt Z9. Have you guys tried different headsets?
I think you may have just been lucky. It is uncommon to A) answer during the ringtone, and B) have the caller complain about the loud noise.
It happens on my Bluetooth earpiece, and Nokia car kit, and JVC car kit. So, it is for HTC to resolve.
I've tried three headsets and it happens on all of them. It happens even when I have the phone on vibrate.
I spent an hour on the phone with HTC support and they are awful, even after telling her that it happens on three different headsets she says that is sounds like a headset issue not an issue with the phone.
When I explained for the third time that I would agree if it happend with one headset but since it happens with all of the headsets it would support my arguement that it is an issue with the phone.
It was like talking to a wall. I wish I had an alternitive to HTC at this point, I love their design and have never had a problem with any of their other phones but this their lack of support is amazing.
I think its with all HTC phones. Happened with my Dash - Wing and now Tilt.
But I've never had anyone complain about hearing music on their end...I can just hear it on my headset for about 1 sec. I've also had my SMS tone play wile on a call and also my VM tone play while on a call and I've asked them if they heard that and they said no.
I also only use noise cancelling headsets.
VooDoo1 said:
I think its with all HTC phones. Happened with my Dash - Wing and now Tilt.
But I've never had anyone complain about hearing music on their end...I can just hear it on my headset for about 1 sec. I've also had my SMS tone play wile on a call and also my VM tone play while on a call and I've asked them if they heard that and they said no.
I also only use noise cancelling headsets.
Click to expand...
Click to collapse
I've never had a problem with any other handset, I've had a Qtek 9100, MDA, O2 Exec, Wing and a Dash.... crap I spent a lot on phones. The only one I've had problems with is the TyTNII.
Same problem here. And sometimes the speaker will very briefly go into speaker mode as I answer! Not good.
Hi!
I have one black X1i SW ver R3AA010, GENERIC_UK rom.
Great phone, but i have problem with the wired factory headset.
If i have call, phone playing ringtone, and i want receive this call, but no effect. Another problem is mic is on the phone enabled, not on the headset - in ear-phone mode.
On another forums reported same problem.
I see now only one solution:
1.,Unplug Headset from phone
2.,Incoming call, after hearing rintone - plug in the headset
3.,Problem is fixed..., but only to next soft reset or next unplug
Is there any registry mod or cab fix to this?
example : manual headset mode on/off
pls help me, thank you
As you mention, the problem has been scarcely discussed in other threads (and forums), but no one's seemed to find a solution. I'm not even aware if the headset problem is a general flaw in X1, or we're just a few unfortunates.
I won my X1 in a competition so I don't think I'm really in a position to be pissed off, but this defect is indeed a MAJOR drawback, and it surprises me it hasn't been criticised more loudly in e.g. reviews and forums.
The problem smells to me like a firmware issue (though I really don't have a clue), i.e. something that our friends at Sony Ericsson (are you out there, guys?) should be able to fix in an update, but they don't.. :-(
Anyway, my workaround is to make sure the headset is 'armed' in advance whenever I want to be prepared for an incoming or outgoing call. E.g. before I hop on my bicycle, I 'simply' make a short call to whatever number, e.g. to my voicemail, and as soon as there's a connection I plug in my headset and hang up. Now the headset works - I test it by pressing the headset button twice, which should initiate redialling the last number used.
In any case, it shouldn't be necessary to make such arrangements! My previous mobile was a crap, crap Nokia - but I miss it because its headset worked like a charm.
In fact, just out of curiosity - if anyone reading this has an X1 without any headset problems (i.e. mic and button not being responsive), please speak up. Maybe we can then isolate the problem.
This is my first, and only a minor, contribution to the forum; I've been a feeder up till now.
I bought a cheap bluetooth headset for my HD2 for use with my motorcycle satnav and also my HD2 - not that I want to take calls whilst I'm riding, but playing music would be a possibility. It was similar to this:
http://cgi.ebay.co.uk/Bluetooth-V2-...e_Phones_Bluetooth_Acc_ET?hash=item3efab16de4
I paired it with my satnav and could hear voice commands and music as expected. I then paired it with my HD2 and could only get calls, no music playing!!!
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
There were three devices paired (HD2, satnav and my car) so next I had to work out which one. I found that if you look at the nickname for each one, it's decoded into english by the Reg Editor (I use CERegistryEditor). Using trial and error I found that changing the setting "Hideconnections" from "0" to "1" did the trick. I can now hear music through the headset!!!
Well chuffed with myself!!!
PS Perform a soft reset after changing it to lock it in otherwise it resets to "0" after a disconnect.
OOPS! because I was looking for Bluetooth stuff I posted this in the wrong area, sorry!!! Maybe a moderator can correct please?
How bizarre it works by default for me......well done on the find though
Thanks...
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
All I can suggest is that - like I did - compare settings with something that does work. Maybe because you have a mono headset (mine is stereo) it's not capable of receiving music?
Hi
I could play music and receive system sound in my Jabra mono bluetooth earpiece if, in HD2, I go bluetooth->advance->Audio and check "play system sounds on remote hands-free device". However, after a phone call, the music and sound will be routed back to the phone speaker, though the earpiece is still connected (you can still make/receive phone calls through the earpiece).
The music and sound can only be routed to the earpiece again after a soft reset.
The other observation is that, if there is pause in between music or sound for a period of about 12 to 15 seconds, the HD2 will "suspend" the bluetooth transmission (beep in the earpiece) and resuming the music will cause the bluetooth transmission to be re-established (beep sound in earpiece). This is causing skipping of the first 1 to 2 second of the music / sound.
Have installed BTaudio V1.0. It is working on my HD2 and will keep the transmission constant and no skipping problem.
However, also needing soft reset after phone call.
Does any one has similar experience ? Is this earpiece/ head set related of is this HD2 related issue ?
No one has simialr experience ? Is there a thread on bluetooth related registry tweaks, I have been searching for it but don't seems to be able to find one. Any help will be appreciated.
anzudragon said:
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
Click to expand...
Click to collapse
+1 as well
I have a Samsung WEP420 mono bluetooth and no success either.
Armes said:
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
Click to expand...
Click to collapse
I don't have that reg key at all! I have a dutch hd2 running stock 1.66. When I try to connect to a parrot party bluetooth stereo box this (most of the time) doesn't work. Once or twice I established a working connection but after trying multiple times with no luck I decided to find a fix for my problem. Now I try to edit my reg with this and it's not there!?
i paired the hd2 with the car kit parrot ck3100... leaving apart that it doesn't connect always... although i have checked in settings to play all phone sounds through BT it doesn't...
i think it's a BT problem of the hd2, or maybe all WM phones... 'cause ițve had issues like this before...
P.S. once it played the music thorugh the car kit... just like this...
I have a problem with my unrooted Xperia Z with a locked bootloader. My main speaker does not work for any media like music games or videos, but works fine for loudspeaker calls. Also the earpiece speaker doesnt work at all. Another problem i found was that my microphone would not work at all unless it was in a call and i was using loudspeaker. The final problem is that when ever i plug in my earphones, google now pops up and sometimes my phone starts playing music automatically throught the earphones, when i remove the earphones, instea of stopping the music continues but the speakers dont work so it just keeps playing them silently. If anyone knows the soultion to this, please respond as ive searched everywhere and i have not found one solution yet.
UPDATE: i used the application soundabout to reroute the audio and the calls are now fine, the only problem is that when i plug in my earphones the google now problem persists. If i plug in earphones with a mic, i dont get any of these problems and everytime i want to use my internal speaker for media, i have to manually re-route the audio to them. Anybody know a solution to these 2 problems?
I do have the exact same problem, I tried different ROMs and Audio Mods (at the moment I've got a stock ROM) without any change.
Did you somehow fix it?
Exact same problem, i run stock android 5.1.1 build 10.7.A.0.222 locked boot loader. Problem suddenly came up last week during vacation, quite some time after I did OTA upgrade to 5.1.1 - so this is not related to ROM updates.
After installing soundabout (thanks for the hint) the rerouting did not work immediately - i had to set phone to earpiece and media to speaker in the app and reboot for it have an effect.
I think the root cause is, the phone thinks there are headphones connected, when there really aren't. If I use the UKW radio app, it starts and shows headphones as output-icon right away - it should actually complain that there is no reception without phones because the antenna (headphone cable) is missing. Since it doesn't complain I guess that's the culprit.
Any hints how to fix that, without using a rerouting app? (kinda stupid, using bluetooth speakers and so on now needs a manual setting change in soundabout).
I have that phone for more than 2 years now and used headphones maybe twice with it, so a busted headphone-jack is out of the question too.
Guys give it a try.
Thanks Ess Arr, that really works!
Hi,
I've bought a "Jabra Stealth" headset and I'm unable to launch Google Now on my Nexus 6 (Android stock 5.0.1, FrancoKernel r8) with the dedicated button although it's a built-in feature of the headset. I assume that this is an issue of compatibility with Android 5.0. Jabra has answered me that I didn't configure vocal commands well but that's false. Has someone encountered the same problem and has a solution for it?
Thanks
xof9999 said:
Hi,
I've bought a "Jabra Stealth" headset and I'm unable to launch Google Now on my Nexus 6 (Android stock 5.0.1, FrancoKernel r8) with the dedicated button although it's a built-in feature of the headset. I assume that this is an issue of compatibility with Android 5.0. Jabra has answered me that I didn't configure vocal commands well but that's false. Has someone encountered the same problem and has a solution for it?
Thanks
Click to expand...
Click to collapse
I have a similar issue. I use a Plantronics Voyager Legend. A couple of issues:
1) press and hold of the action button will bring up "voice dialer" instead of "google now". I dont know if you've ever tried to use voice dialer, but i think its more or less deprecated since the nexus 1 was the new kid on the block.
There is an app for bluetooth on the app store that lets you choose what to launch with that button. however, it didnt work that well for me. lots of lag and it blended together with other bluetooth related issues.
2) Bluetooth never seems to "turn off". I have a smart sensor enabled headset. IE the phone should know if i have the headset on or not, and pipe phone calls and notifications and ringtones to the speaker if i dont have it on and to the headset if i do. instead, the phone constantly pipes EVERYTHING to the bluetooth headset. no fix yet.
3) phone connection to my car's bluetooth makes my audiobook start playing. I have no idea why. it is not a setting in the audiobook app. Seems that the fix is to disable streaming media over bluetooth (contacts/messages only)
From what ive witnessed with issues regarding audio, screen brightness, bluetooth, this is yet another half-baked google product with little to no attempt at a proper follow through. just a crap device rushed to market with tons of potential and a complete crap OS and barely any thought or usability effort put into anything except the home screen.
I also have the N6 with the P Legend. I am having issues where the caller can barely hear me. Do you know if you have this issue at all?
shrimants said:
I have a similar issue. I use a Plantronics Voyager Legend. A couple of issues:
1) press and hold of the action button will bring up "voice dialer" instead of "google now". I dont know if you've ever tried to use voice dialer, but i think its more or less deprecated since the nexus 1 was the new kid on the block.
There is an app for bluetooth on the app store that lets you choose what to launch with that button. however, it didnt work that well for me. lots of lag and it blended together with other bluetooth related issues.
2) Bluetooth never seems to "turn off". I have a smart sensor enabled headset. IE the phone should know if i have the headset on or not, and pipe phone calls and notifications and ringtones to the speaker if i dont have it on and to the headset if i do. instead, the phone constantly pipes EVERYTHING to the bluetooth headset. no fix yet.
3) phone connection to my car's bluetooth makes my audiobook start playing. I have no idea why. it is not a setting in the audiobook app. Seems that the fix is to disable streaming media over bluetooth (contacts/messages only)
From what ive witnessed with issues regarding audio, screen brightness, bluetooth, this is yet another half-baked google product with little to no attempt at a proper follow through. just a crap device rushed to market with tons of potential and a complete crap OS and barely any thought or usability effort put into anything except the home screen.
Click to expand...
Click to collapse
When the caller can barely hear you, check your phone. Sometimes, even though my headset is on, the phone doesn't care and attempts to use the phones speaker or mic.
shrimants said:
When the caller can barely hear you, check your phone. Sometimes, even though my headset is on, the phone doesn't care and attempts to use the phones speaker or mic.
Click to expand...
Click to collapse
That's my current issue...
I can answer the calls with either my truck or ear piece, but both will randomly not have audio. The phone says it's connected BT, but I have to switch the source to speaker or handset and then click back over to BT. The whole time while I'm begging the person on the other end not to hang up and to hold on a second. Not bad when I'm at my desk with earpiece....let's just say it's a bit more nerve-racking on the highway.
scap99 said:
That's my current issue...
I can answer the calls with either my truck or ear piece, but both will randomly not have audio. The phone says it's connected BT, but I have to switch the source to speaker or handset and then click back over to BT. The whole time while I'm begging the person on the other end not to hang up and to hold on a second. Not bad when I'm at my desk with earpiece....let's just say it's a bit more nerve-racking on the highway.
Click to expand...
Click to collapse
Same here. Also have a problem where, when on a call, an incoming call will kill bluetooth. This makes it unusable in my car as it becomes a real safety issue. I have to turn off BT and use the speakerphone which luckily is good enough for the job. Even switching the source and switching back doesn't always work for me.
I regret not sending the phone back for this problem. I'm waiting on v5.1 this month as rumored, hoping that will solve the problem. May just go back to my Lumina 925.
Has anyone tried going into Google settings app -> Search & Now -> Voice and turn on Bluetooth Headset (records audion through bluetooth headset if available).
I have Nexus 5 and Jabra Stealth and I had the same problem. I could solve it thanks to these indications: hackerspace.kinja.com/reassign-your-bluetooth-phone-button-to-open-google-n-1507391132
Same issue with calls not having audio through the car Bluetooth unless I switch to speaker/handset then back. I guess Marshmellow really messed up Bluetooth on a lot of people's phones not just us. Tried different rooms(AOSP, CM, stock) no help even tried updating the radio which helped Bluetooth crashing completely and requiring a restart but the phone issues remain.