Related
I am in desperate need of help you guys! I screwed up so hard that I don't even know where to begin...
THE SITUATION:
-Right now when I go to turn on my phone, it will only stay on the current SAMSUNG GALAXY S I9000 screen (the very first screen when booting your phone) and it keeps flashing in and out.
Before trying to use Odin to put back the original Kernal on my phone, it was just stuck as the SAMSUNG GALAXY S I9000 screen, still wouldn't start. <I followed this website step by step>
http://www.samsunggalaxysforum.com/...-to-a-stock-rom-after-installing-darky's-rom/
BEFORE ALL OF THIS EVER HAPPENED:
I finally rooted my phone and manage to download Clockworkmod recovery on my phone and then used it to flash Darky's 10.2 custom ROM. Everything turned out great except at the beginning of the boot, the screen turned all rainbow coloured, completely distorted, and it continued to do that. I then tried to go back to Recovery mode to do the Voodoo lagfix but I couldn't even get into the recovery mode anymore, it either wouldn't let me, or it did but the screen didn't go to it properly (more likely the first one). I read somewhere that if you reflash your phone again, it should make all the tweeks go away. So I tried that from the Darky's tools menu and ever since then, I've been stuck with the Boot Screen this whole time...
I already bricked my phone once, and that was before the Flashing Boot Screen.
I really need help you guys, I would at least like to have my phone back to the original basis, at least! Your help would be greatly appreciated!
THANK YOU
P.S. (i'm not that great at all this phone tweeking, but I've succeeded in doing it up until yesterday)
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
gfacer said:
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
Click to expand...
Click to collapse
Yes, I can get into download mode! (thank you for reading my post).
If it's not too much to ask, could you maybe find the ROM that would be good for me to flash, considering my situation?
I want to be sure that it's what the top tech guys would recommend
A link would be appreciated
thank you again!
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
gfacer said:
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
Click to expand...
Click to collapse
So in essence all I have to do is flash the Darky ROM V10.2 with Odin using the Download mode on my phone and it should be okay?
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well...I did everything you said. The ROM is on there alright, it flashed and everything (And I know this because now when the boot screen STILL FLASHES, the darkcore & darky's rom logo are on it too).
THIS TIME AROUND:
The stock recovery seems to work...
any ideas??
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Alright I'll try and reflash the same one using a different version of odin the. I'll let you know what happened
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
tried ezodin, flashed it, and i still get the exact same thing I've exhausted every single possibility there is!!!
I really need help on this, my warranty is not gonna do anything because i have the phone rooted..
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
gfacer said:
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
okay that could be useful data potentially (let's hope it won't have to be).
If you didn't see my reply from the other thread, here it is:
Once I rooted my phone, I automatically went from Stock Froyo to Darky's 10.2 extreme edition. It worked and everything except for that color disfiguration and the clockworkmod recovery not working.
It's weird because after I flashed my first darky's rom, i checked the phone and it said that the firmware version was 2.3.X (I believe X may have been 4). So from what you're saying, I don't exactly think it has anything to do with the fact that I went straight from froyo stock to GB darky ROM.
So are you saying that I should flash darky's 9.3 for Froyo and THEN flash the latest version?
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Ok, so just to be 100% on this
-I should flash Darky's 9.2 froyo onto my phone,
-then I should flash regular GB onto my phone (Not sure about the bootloader part though, if you could clarify that)(Also where would I get JUST a stock GB ROM?)
-then I can flash a custom GB ROM?
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
roma17 said:
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
Click to expand...
Click to collapse
I think you are right but other than trying again and again, which I've done before -though now I know why I had too - I am out of suggestions. Good Luck and if I have a brainwave I'll let you know.
Sent from my GT-I9000M using XDA Premium App
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
gfacer said:
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
Click to expand...
Click to collapse
Okay, basically at this point, I just want my phone to work I've tried what you said. I remember that before rooting my phone initially I was running Froyo 2.2.1. So I found the ROM for that ( http://www.samfirmware.com/WEBPROTECT-i9000.htm ) Just like you said. I downloaded from the *Provider Samsung Galaxy S i9000 heading and picked the I9000BOJS5 ## from February 2011 because I think somewhere around there I updated my phone to Froyo. Flashed it, did everything, still no luck.
I've had a recent hunch though. When the bootscreen boots up, it keeps saying i9000 only, when before it used to say i9000M at least for a little bit (yes my phone is i9000m). Is there a stock froyo rom that's specifically designed to go with the i9000m model? Or are they just all the same?
Never give up
-Thank you so much
So if I reinstall the stock ROM from another Galaxy Ace (same one this thing shipped with), the phone doesn't boot, at all.
I put Cyanogen back on, and it boots fine, but my data connection never works and my voice/messaging connection constantly craps out and I need to reimage again. (Weird...if I go back to a working image, then reinstall my current one, it works fine.)
I'm at a loss...but I'm only one step away from returning it anyway.
IrishRed said:
So if I reinstall the stock ROM from another Galaxy Ace (same one this thing shipped with), the phone doesn't boot, at all.
I put Cyanogen back on, and it boots fine, but my data connection never works and my voice/messaging connection constantly craps out and I need to reimage again. (Weird...if I go back to a working image, then reinstall my current one, it works fine.)
I'm at a loss...but I'm only one step away from returning it anyway.
Click to expand...
Click to collapse
U mean currently u r on cm7 & want to flash a stock rom, but u get bootloops rite?
Sent from Galaxy Ace GT-S5830 using Jusada's awsum ICSunday2 + Slaidmod script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
domnic79 said:
U mean currently u r on cm7 & want to flash a stock rom, but u get bootloops rite? [XDA RULE]
Click to expand...
Click to collapse
Something like that, only it doesn't loop. When I load up a stock rom, it simply hangs at he startup "Samsung Galaxy Ace" screen.
after installing your stock rom wipe your cache and dalvik it will work , if not , use odin and flash a different stock firmware first may be KPN or KPH
Irishred is that the stock koodo 2
3.4 rom? I've been looking everywhere for that, could you post a link maybe as I'm sure there are others looking for this also.
Thanks
Sent from my SAMSUNG-SGH-I997 using XDA App
Well, if you can't flash the stock rom, there's only one thing to do then.
Use ODIN. T_T
It'll push your recovery back to the stock crap too, but then again, there's no reason why it shouldn't work, anyway.
there might be case that it works but you are too lazy to find solution for it to work
what problem you have when you flash stock roms with odin??
You have to flash via Odin, because your internal memory was formated to ext and the stock rom uses a different (I don´t really know which is used by stock rom, but you can google it.)
GerasVille said:
You have to flash via Odin, because your internal memory was formated to ext and the stock rom uses a different (I don´t really know which is used by stock rom, but you can google it.)
Click to expand...
Click to collapse
This is what I was suspicious/worried about. Okay...now to learn to use Odin.
I just found this on sampro.pl I'm at work now so I can't download. Have a look
hotfile.com/dl/137128537/a629597/GT-S5830D_TLS_S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4.rar.html
Sent from my SAMSUNG-SGH-I997 using XDA App
EXT format issue ?
Just a thought...
I once installed a Cyanogen rom on a Galaxy S that changed something in the memory - and stock rom was not working afterwards. I had to go back to Cyanogen. Too bad if you're planning on selling it in stock rom condition.
The only way back was to find a stock rom that contained the whole package - including correct pit file, pda, modem and a repartition of memory.
Flashed via Odin.
Is it a one file/multiple files package? Kernel update?
I hope any of this is can help you solve the problem.
It is a one file package. Password is sampro.pl. It is multi-csc for koodo & telus. Mine loaded up telus so i had to change it. It works great. I will go back to myth ics rom. Its just nice to know that if I need to return to stock I can.
Sent from my SAMSUNG-SGH-I997 using XDA App
Spider9909 said:
It is a one file package. Password is sampro.pl. It is multi-csc for koodo & telus. Mine loaded up telus so i had to change it. It works great. I will go back to myth ics rom. Its just nice to know that if I need to return to stock I can.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Wow, been looking for this
Will give it a try, Thanks!
Edit: Works great, all back to stock Koodo (temporarily). Thanks again for posting Spider, XD
just to add...
I experimented with a few custom ROMs but they rendered some functionalities un-usable. I tried to recover from a full system and data backup which failed.
From that: 1)Followed instructions from androidadvices.com (androidadvices.com/update-samsung-galaxy-ace-s5830-xwks9-gingerbread-235-firmware/-- page 2) But used stock ROM for Koodo (GT-S5830D S5830DTLKI4) from spidre9909's post;
-- a download link to ODIN is included...
2)Rooted the phone and re-installed Clockwork;
3)Restored my full backup created just before my trials with custom ROMs
Now I am back! At this point, follow unroot procedures — if you want to…
Hope this helps...
DXKPB is the firmware I know that includes data.rfs (which means your /data would get formatted with rfs, and that means stock ROM will love your phone again)
Sent from my GT-S5830 using Tapatalk
how long does this process normally take flashing by odin
meckino2002 said:
how long does this process normally take flashing by odin
Click to expand...
Click to collapse
5-7 minutes
domnic79 said:
U mean currently u r on cm7 & want to flash a stock rom, but u get bootloops rite?
Sent from Galaxy Ace GT-S5830 using Jusada's awsum ICSunday2 + Slaidmod script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
Click to expand...
Click to collapse
thanks
IrishRed said:
So if I reinstall the stock ROM from another Galaxy Ace (same one this thing shipped with), the phone doesn't boot, at all.
I put Cyanogen back on, and it boots fine, but my data connection never works and my voice/messaging connection constantly craps out and I need to reimage again. (Weird...if I go back to a working image, then reinstall my current one, it works fine.)
I'm at a loss...but I'm only one step away from returning it anyway.
Click to expand...
Click to collapse
it's interesting you mention that your wireless connection doesn't work properly. I flashed the newest firmware (something from vietnam I think) and the same thing ... my connection keeps waffling back and forth from H to 3G to nothing at all.
I don't know where I started but I've ended up recovering from the dreaded:
{Phone} -/!\-{PC}
situation by loading I897UCKB1-homeBinary.tar into all slots in ODIN w/ Bootloader mode enable.
I used the volume buttons + plugging in USB to get into download mode as it was literally the only thing left.
Now I can only load DIRECTLY into the recovery menu without even putting a combo.
I JUST reflashed with Speedmod [speedmod-kernel-i897-k13c-500hz] as it was the only CWM shell I could get to work. The one in the Cyanogenmod wiki is really the drunk driver that led me here some 14 hours ago. And when I say work I mean i ca reach the recovery shell, because CWM actually was just glitching the living hell of my screen with lines of all colors and dots everywhere.
I want ANY ROM AT ALL FLASHED. The original was 2.1. All I have is CM7.zip and GoogleApps.zip in my internal memory. I can't mount my ext-sd at all, as it just gives an error. What do I do now?
Sorry for the spelling and poor in advance, it's 4AM and I haven't slept in 3 days.
I've tried LOADS and would just really like to have a relatively functional phone.
Go here and try flashing to stock. http://forum.xda-developers.com/showthread.php?t=1300843
I suggest kk4 one click with bootloader re partition
Sent from my SGH-I897 using xda premium
Thanks! I'm grabbing:
"i897uckk4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe.zip"
now. Weird how that was just THERE and my sleep was nowhere to be found hiding underneath it. I'll report back asap.
The garbled boot screen you saw was due to having mismatched bootloaders. The guide specifically says you must be on gingerbread to follow the guide. So either use a non-gingerbread kernel, or upgrade to GB
Sent from my CM9 ICS i897 Captivate
Working perfectly. Took the CornKernel_UCKK4_v706 Kernel so I could customize a bit more. Rooted. And installed rom manager.
Now it is time to step up ICS
Sent from my SGH-I897 using xda premium
me too used "i897uckk4_Odin_One_Click_CONTAINS_Bootloaders_Re-partition_Full_Wipe.zip" now i want a network unlocked and stable ICS or GB ROM let me know with instructions and if i did something wrong how can i revert back to the ROM (i897uckk4_Odin_One_Click_CONTAINS_Bootloaders_Re-partition_Full_Wipe.zip) i've installed
Try serendipity VII , I flashed it earlier and I think its the best stable and fastest rom I used. Its awesome, and you can customize it so much. Link is in my sig.
Sent from my Serendipity VII flashed Captivate using xda premium
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
IdleKing said:
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
Click to expand...
Click to collapse
Please read the instructions in his post
You are on 2.3.6
1. Install Mobile Odin
2. Flash REPACK_LP1 CF
3. Let Rom Boot
4. Go to CWM and flash LiquidSmooth
5. Wipe Data, Wipe Dalvik/Cache
NoRmAlY_CrAzY said:
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
Click to expand...
Click to collapse
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
IdleKing said:
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
Click to expand...
Click to collapse
not really answering the question xD Are you ok GB or ICS right now?
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
IdleKing said:
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
Click to expand...
Click to collapse
As the install guide says you are meant to flash the repack and then go into recovery and flash the rom. You will likely need to flash a gb kernel via obin and then do as hia install guide says
Sent from my GT-N7000 using xda premium
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
IdleKing said:
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
Click to expand...
Click to collapse
Well i am not 100% sure, tbh your safest route would be to re flash a stock gb rom then root it and then try again just to make sure theres no issues, in which case you can download a gb rom from the sticky in the dev section (make sure its a older rootable image!) and flash using odin while your phone is in download mode
please start at http://forum.xda-developers.com/showthread.php?t=1424997 then/or http://forum.xda-developers.com/showthread.php?t=1329360
i am hoping of course, that you can still somehow manage to get into download mode.
I has almost the same issue! I am running speedmod kernel and i want to put back the cf-root 5.3 kernel so I flashed the tar which was included the zimage via mobile oding and after reboot the phone gave me a blank screen and no recovery! only downlaod mmod where I can manage to flash speedmod again via pc odin...
why is that happend?
Come on mate have you even read the opening page for the liquid smoother rom on all opening pages it tells you to the letter how to install and yet you don't follow it and wonder y you have a black screen. Have you installed clock work recovery after rooting your note if not search how to install cwm on you tube cursed4eva is a brilliant guy who spells it all out for you- . Please don't use the fact you a noob as an excuse as I'm probably newer than you but can read and follow instructions to the letter as the developer knows best.
W00t! The phone came back to life! Thanks alot.
Now, what i dont understand is that repack_lp1 thing. I downloaded I9220LP1-N7000-ICS-REPACK.tar ... now do i flash this one using mobile odin? Will this install the CFM?
Look for cursed4eva on YouTube watch the video were he shows you how to install clockwork then read the op of liquid smooth rom simple !
Please do some more research before randomly flashing files without having any knowledge as to what they do.
Before you start fiddling with repacks and leaked ICS based roms, read this: http://forum.xda-developers.com/showthread.php?t=1633938
If you still think it's a good idea to flash anything based on the leaked ICS builds, go to the thread of the rom you want to flash and read the instructions. Again, read the instructions and then to be sure read the instructions once more.
Then follow the instructions step by step and you're good to go.
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem. However you should follow the instruction from their website.
tknguyencsu said:
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem.
Click to expand...
Click to collapse
This snippet of information can only further confuse a man who's mustering the courage to step into the unknown. Don't post stuff like that in threads like this. You can tell that to me or any other vet, and we'll know what you're talking about. OP won't.
tknguyencsu said:
However you should follow the instruction from their website.
Click to expand...
Click to collapse
Now THIS is what he needs to hear.
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app