hello,
i need some ideas, after i changed my digitizer the screen works perfect with one small important little problem, the buttons from the digitizer are acting like a part of the screen and not like buttons. so basically i don't have any buttons.
any ideas ? i've opened it 3 times i didn't found anything wrong with it. one the digitizer it was wrote milestone, not a853 or something else.
thanks for help
Related
I need some help/questioned answered and am hopeful someone here can help
I am trying to replace a broken touch screen on an att tilt but when I replace it with a new screen and turn on the phone, the touch screen doesnt work. Is there something special I need to do? ie software update/hard reset? Or on the touch screen there is the flexable cable the wraps around to the back of the lcd with 4 connectors, is there a special way of attaching it? ie glue? it looks like the old one was just held done with tape, but I did the same thing and am wonderingh if it is connecting. I can upload photos if you dont understand what I talking about.
Please someone/anyone help. all suggestions are greatly welcomed.
I am in a little bit of a rush so I dont know if I explained everything clearly, I hope so
replace lcd
Hi, I replaced mine and there is just a ribbon cable that plugs in...it can be kinda tricky but basically you just line it up and slide it in...Theres a couple of threads on here with detailed instructions you can find by using the search, thats how I learned how to do mine. The only thing I had to do afterwards was the touchscreen alignment function that you normally do when first installing the OS because it seemed my touchscreen was slightly off..after that it was fine.
Hello, I am a true noob so please forgive me if I sound dumb.
I had a broken screen so I bought a new one on Ebay. I changed it perfectly, it looks good but now when I touch the screen it acts like I touched the top left corner (in portrait)no matter where on the screen I touch (so it opens up the "Start" menu). In landscape it acts like I touched the top right so it opens up the drop down menu with all the running programs.
I would really appreciate some help. I try re-aligning the touch screen but it does not recognize any touches at all. I have to soft reset the phone to get out of the re-align program.
I don't want to hard reset because I have read many cases where the phone gets stuck in align program as it is trying to setup and they have to install remote access or something to get around it.
I would like advise on whether it is the new screen or the phone. Is there something I can check for inside or should I send the screen back for a replacement.
Thank you for your help.
Having replaced the touch screen in a Palm with success, I would say that...
You either have a problem with the connector for the screen, recheck the connection
Someone sold you a bad screen.
Something else is wrong with the device.
At this point I don't know that in your position I wouldn't do a hard reset. What is the worst thing that can happen? The device is already broken in it's current state.
Good luck.
Thank you
Thank you very much for your help. I will try the connector. if it does not look damaged then I will return the screen.
Did you replace just the screen itself, or the screen and the digitizer? More than likely your digitizer is broken aswell. If you replaced them as a set, request a new one from wherever you got it, and if you just replaced the LCD, then you need to buy a digitizer aswell.
ashasaur said:
Did you replace just the screen itself, or the screen and the digitizer? More than likely your digitizer is broken aswell. If you replaced them as a set, request a new one from wherever you got it, and if you just replaced the LCD, then you need to buy a digitizer aswell.
Click to expand...
Click to collapse
Well, I only received the screen. I cant figure out where the digitizer is on the tilt so I don't know if I changed it or not. Does any body have any picture??
I think I read somewhere that it all comes as one piece(the screen and digitizer), but I can't confirm it.
Indeed they most of the time do come as one peice, so if your connection is good on the mobo, then I would say that the digitizer you recieved is bad. The digitzier is the super thin peice of glass that covers the LCD screen.
Hello, from some time, the digitizer of my g1 is acting weird, the bottom right part is not sensitive at all, and sometimes the screen gives to the os a completely wrong input, so the screen flicks by itself
Anyone knows what can cause this?
Thanks
Tipika said:
Hello, from some time, the digitizer of my g1 is acting weird, the bottom right part is not sensitive at all, and sometimes the screen gives to the os a completely wrong input, so the screen flicks by itself
Anyone knows what can cause this?
Thanks
Click to expand...
Click to collapse
well my G1's sensor act different whenever I connect it to (not compatible) charger (i.e. Blackberry's OR Motorola's)
Can't say it's due to fall of your G1 (my G1 fall a hundreds of time & still no problem but just accelerometer got screwed )
It possibly can be cause of you HARD PRESSED that part somehow somewhere .......
OR concern some repairer to get it fixed (i.e. Change digitizer)
Best of Luck
my G1 was destroyed in a crash, so I buy new plastics+keybord+slider (all plastic parts) to assemble the hardware in the new cover.
All is going well, but after the boot I notice that the touchscreen is unusable... if I touch the screen it begin to slide or press random points that I didn't touch, for some seconds...
The touchscreen is going crazy!!
I tried to open again the G1, reconnect the cables of screen/touchscreen and restart android.. but I have the same issue..
What the hell is happening?
The touchscreen panel seems ok, it doesn't have deep scratches, and it seems that the fall has not damaged visually the touchscreen.
It is a link problem or touchscreen, or what??? Someone know?
I don't know what to do.. buy a new touchscreen for 20€?? I spent 20€ for the plastic, if I don't solve I would change device.. but the qwerty device in europe are not so good
I'm waiting for milestone3, or a samsung/HTC qwerty device with dual core and screen> 3.7"
Please help I don't want to bury my G1
EDIT:
I found this video that show a similar issue on the motorola milestone.
It is really similar to my isssue..
http://www.youtube.com/watch?v=_PNuXREuDxA
I'm thinking that perhaps touching the back of the touch panel I spoiled something, or something like that (perhaps I have to clean the back of touch panel with somthing?)
I'm going to try something, all reply are appreciated.
I find solution (hope)
The problem is the bus cable of touchscreen that is damaged.
I bought a new cable, I hope to solve this problem.
Sorry for this useless thread
Samsung ace s5830 new digitizer screen acting CRAZY Samsung
Hi!
I have a BIG problem.
I changed the Digitizer on my phone, becouse the original Digitizer was broken, the phone worked just fine for about 5minutes. After that like the digitizer going crazy random typing, after i shutdown phone and remove the flat cable of digitizer. everything is good. But if i put it back, Like a ghost having its fingers on the phone writing dialing going into menues and much more in a fast speed.
So what is the problem just digitizer or something else.
TIA
Boris
borism25 said:
Samsung ace s5830 new digitizer screen acting CRAZY Samsung
Hi!
I have a BIG problem.
I changed the Digitizer on my phone, becouse the original Digitizer was broken, the phone worked just fine for about 5minutes. After that like the digitizer going crazy random typing, after i shutdown phone and remove the flat cable of digitizer. everything is good. But if i put it back, Like a ghost having its fingers on the phone writing dialing going into menues and much more in a fast speed.
So what is the problem just digitizer or something else.
TIA
Boris
Click to expand...
Click to collapse
I have the same problem after digitizer change. Anyone know solution for this ? Thanks
Norcio82 said:
I have the same problem after digitizer change. Anyone know solution for this ? Thanks
Click to expand...
Click to collapse
i get new digitizer and everything is working.