I'm a new owner of the Rogers Optimus 3d. (although I have had other android devices before) I need to use auto proxy to setup my mobile web access so I need to be able to have root. I've tried using Froyo (and some of the Froyo roms here) and although they were an improvement I would like to go to gingerbread. Tried flashing 21a baseband but it seems to be hunting for a signal a lot more (it goes from e to 3G to h constantly) then sometimes I lose signal altogether. I'm just curious if other Rogers owners have run into similar problems and what you have done to solve it. I remember reading somewhere some people were having luck with the brazil baseband (20a I believe) .....but I can't seem to find any links that I can download it from.
By reading all the forums I've learned a lot but I havent seen many Rogers users around so I'm unsure if that's why I'm having problems. Is the Rogers hardware different at all?
Thanks in advance
there is a gingerbread rogers rom and a Brazil rom. Both not rootable.
Thanks, I guess I was mistaken I thought that the brazil own was root able.
Related
Hey everyone,
I recently purchased a Samsung Galaxy S from Sasktel sometime in mid-october. This is the first android phone I've ever had, and after a few days i decided to try to root it. The rooting process went fine and I had absolutely no problems with my phone. However, i eventually decided to try a custom ROM. I went with Darky's Raw Steel Edition from this forum but after i successfully installed it (v2.2) I could no longer connect to the data network. I could still make calls and receive texts, but any sort of internet connection wouldn't work. When version 3.0 of the rom came out I installed it but had the same problem. I thought my best option at this point would be to just restore to the stock 2.1 firmware. I wasnt exactly sure what my phone had been on when i bought it, but i decided that I9000XWJM9 from samfirmware would be my best bet. I flashed with odin, and now I have no network connection at all! Does anyone know what my problem could be? Thanks so much to anyone who can point me in the right direction!
Find your apn settings from your provider or google it and it is is this forum aswell where theres list of them just enter your apn settings for your provider manually.
Go to www.tweaker.com and get the settings for ur network
Sent from my GT-I9000 using XDA App
Thanks for the help! However, I'm having some trouble finding the APN settings for sasktel, if anyone could post a link or something that would be great. And gadgetcheck, I think you gave me the wrong link, it takes me to like a media site with nothing about APN settings as far as I can see.
http://tweakker.com/
I am really sorry man!
I actually miss tiped the url in my last post.. Now this url will help u out...
If u need more help mention me http://twitter.com/gadgetcheck
Sent from my GT-I9000 using XDA App
the SaskTel i9000m stock firmware is JH2. If you're going to use a custom rom, use Doc's. That's what I'm currently using, no issues whatsoever (also on SaskTel in Saskatoon ) If you need the apn settings, let me know, and I'll just copy them out for you, but I'm pretty sure Doc's rom already has them, as I never had to add them. Though maybe they just carried over from my JH2 install?
Hey!
Soo I'm a total noob and i've looked around but can't seem to find this problem. I flashed a stock 2.3.3 for the samsung Galaxy S I9000M. My phone is originally from bell and I couldn't go on the market and sms that where sent to me shows that it was sent 4 hours ago. I bought it off some guy who unlocked it for me. I'm on the Fido network.
So I got a friend to flash it for me and it's on 2.3.3 I9000xxjvk. And now I can't get the 3G to work and it says i'm roaming. Mind you the market works now and sms shows the right time.
I know it has something to do with the modem. My friend suggested the SP6160_ARIES_DB221110 from :http://forum.xda-developers.com/showthread.php?t=876391
Now I have odin and the AIO Vibrant Toolbox installed. But i have no idea how to flash that modem. And I don't feel like bricking my phone thats barely a week old.
Please can someone tell me if this is the right modem and a step by step guide for a noob like me to install the modem.
p.s. I have the correct Fido APNs. it's the same one i used when i had it one 2.1
These links will help you out.
http://forum.xda-developers.com/showthread.php?t=1018414
http://forum.xda-developers.com/showthread.php?t=1015710
Basically you need a Bell Modem. JL2 or KCI will do.
Have you turned OFF Mobile Roaming in the settings .
jje
omgf Thanks soo much
http://forum.xda-developers.com/show....php?t=1018414
helped soo much
you guys are life savers.
well thats weird.... Now i can't search anything on the market, says it's not in the market.... But before I could. i can still download it if i find it on my pc through android market.
Now i can't even download from the pc site. and when i go on my phone it tells me
Warning: : your device might not be compatible with android market. Contact your device manufacturer for information.
This is frustrating. I flashed the JL2 modem, should i try the KCI?
shigoobee said:
Now i can't even download from the pc site. and when i go on my phone it tells me
Warning: : your device might not be compatible with android market. Contact your device manufacturer for information.
This is frustrating. I flashed the JL2 modem, should i try the KCI?
Click to expand...
Click to collapse
I'm not having any problems with the market, though in the past I did install eris market fix. Give it a shot.
I have a CDMA Milestone on a small local carrier (Bluegrass Cellular), and flashed the C 1.43 baseband (stupid mistake!). My carrier uses the C1.07. I found the .SBF file and flashed it using RSD Lite. I now have the correct baseband and 2.1 Android installed, but apparently the settings for the EVDO are wrong. Is there any way to find and change these settings? I took it to see if Bluegrass Cellular could do anything with it and they seem to know less than I do. I told them that it had previously been rooted, and they just assume that's what caused the problem. The phone, texting, and everything else works fine-just not the mobile network. I hope I haven't made a $300 mistake! Any ideas?
I'm in the same boat so if anyone has a solution or a stock Bluegrass sbf it would be much appreciated.
I'm with bluegrass also and am trying to avoid this very dilemma. Did it mess yours up when you flashed a ROM or how?
Sent from my A854 using XDA App
Try flashing another rom, another version ?
Since phones now have USB, i don`t think u can brick it...
And since nobody got a solution, u should keep trying til u find a solution or someone post it here ;D
Hi, just to put this out there, I have searched, read, searched and read for the past 3 nights, and have not been able to find a solution...
I have a T-Mobile t879, which I unlocked to use on my At&Tplan (sorry, TMobile Service is horrible down here). I can only use edge for my data.
I know that the Phone's hardware should be able to use 3g, as the specs show it to have the same bandwidth capabilities as the i717.
I've tried downloading every AT&T modem on this site, and lost all network capabilities, so I'm back on the stock t879 modem. Is there any app, mod or settings I could use to access faster internet on AT&T's network?
BTW - I am using AOCP JB Rom, but if 100% Necessary, I will revert to the stock ROM. Had the same problem before installing JB rom.
platano622 said:
Hi, just to put this out there, I have searched, read, searched and read for the past 3 nights, and have not been able to find a solution...
I have a T-Mobile t879, which I unlocked to use on my At&Tplan (sorry, TMobile Service is horrible down here). I can only use edge for my data.
I know that the Phone's hardware should be able to use 3g, as the specs show it to have the same bandwidth capabilities as the i717.
I've tried downloading every AT&T modem on this site, and lost all network capabilities, so I'm back on the stock t879 modem. Is there any app, mod or settings I could use to access faster internet on AT&T's network?
BTW - I am using AOCP JB Rom, but if 100% Necessary, I will revert to the stock ROM. Had the same problem before installing JB rom.
Click to expand...
Click to collapse
I have had an opposite problem. I have the I717 which runs on edge when I put my t-mobile sim in. I tried using t-mobile modems(found on the xda i717 development forum) but that never really worked. When the t879 came out, I was happy to finally have a official modem that would work, but it turn out not to work for me. So I am using a i717 with t879 stock rom and a tmo modem on t-mobile which runs on edge and sit in my desk.
Did you try all the at&t modems in the I717 development forums(http://forum.xda-developers.com/forumdisplay.php?f=1496)?
You could also try loading the stock I717 rom which should work since I loaded the stock T879 rom on my I717.
I717 - THE ALL IN OnE STOCK ROMS/Kernels/Modems: http://forum.xda-developers.com/showthread.php?t=1647756
If nothing works, my suggestion is to sell or trade your T879 for an I717.
Once in a while, I still look and play with my I717 hoping it will work on tmobile hspa+
Hi everyone.
I'm a bit stuck here, and I have googled quite a bit, but seem to come across conflicting information.
Basically I bought a PAYG S3 LTE on EE UK that had official status, and wanted to unlock it to the 3 network. The only way I found to do it for free was to downgrade the ROM to 4.1.1 and use the hidden menu hack and so just decided to take it to the local phone shop and let someone do it properly.
But when I got it back, it turns out that he actually did the 4.1.1 hack himself and has rendered the phone 'modified'. I was a bit miffed as I wanted to keep it on 4.3 and get OTA updates.
So my question is, can I flash a stock 4.3 ROM back to the phone, and if so, will it keep the network unlocked for my 3 sim? Also, will I be able to root 4.3?
I do apologise if these are pretty obvious questions, but like I say, I just have seen many people saying different things.
I've also flashed a few phones of my own, so I'm not a complete newb in that respect.
Any info will be much appreciated.
Cheers.
Download your corresponding 4.3 firmware from: http://sammobile.com/firmwares/
And just flash it with Odin