hola.
in the mini imei 000000000 I get, I ask the unlock code, and also to get * # 7465625 # I get the error "sorry com.android process has stopped ..." and no mobile network available or if you like with your original sim ... help
you try put it into download mode?
whether
you try to flash a rom with stock ? if not try this if the phone put into download mode is good put an stock rom and all be ok after good luck ^^
spawk said:
you try put it into download mode?
whether
you try to flash a rom with stock ? if not try this if the phone put into download mode is good put an stock rom and all be ok after good luck ^^
Click to expand...
Click to collapse
If IMEI turns to that there goes your ability to use Odin.
Think you should plan a trip to customer care center near you !!
That should solve the problem
Atleast solved mine ^^
yes i can put into download modes, i change teh rom but i have the same problems ..."mobile network not aviable"...imei 00000000....
test this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with selected option in odine this will clear but flash with official rom from samsung good luck ( stock rom )
Related
hi guys
iam on stock no root 2.3.6 baseband lc1 kernel lc1 buildnumber lc1
N7000 not purchased in india..pcode shows "KOR" in the end
can i install this
N7000DDLP8-------4.0.3-----------2012 May-----------N7000ODDLP5-------------India----- -------------------------------Download Install N Root
and wat does this mean - check for CSC (*#272*IMEI#) if not INU, set it.(this is for indian user, if your ROM is different, it shud be accordingly)
du i have to du anything here??
is it ok to go ahead...coz iam unable to update via kies and ota?
Its perfectly fine for you to install this via PC Odin.
Do it. However ur gonna realise its not such a major improvement to GB. Rather go with CM9 ics rom
Sent from my GT-N7000 using XDA
here it is,
1) Open your dial screen and type *#06# this will reveal your IMEI number. Note it down somewhere
2) Now in your dial screen type *#272*IMEI# (where IMEI will be the no. you got in 1st step)
Since your CSC code is set to KOR, scroll down and select INU and click on install. After installation, restart your phone, recheck step2 to confirm if CSC is set to INU, and proceed ahead with PC ODIN.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thank you soo much
I have a problem. My camera doesnt work, and it looks very weird.
Im on Dark Knight 5.5
So is it easy to fix it?
Any help?
Thanks in advance
Try reflash rom without wiping anything, just go install zip from sd card and select the DK zip.
What exactly do you mean by it looks very weird? So it doesn't work at all or..?
Yeah, i might try reflashing the rom, but how about if I replace the camera.apk?
Heres a screenshot of camera.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Warning Camera failed!
Hi There...Please help!!!!!!!!!!!!!!!!
I'm a newbie, so I'd appreciate your patience...and please talk in lay-mans terms also, I seriously haven't a clue!
OK, here I go. I have a hand me down Samsung GT-1900 which I am enjoying, but sadly the camera doesn't work. I managed to go into camera setting and reset it and hey presto, I had a camera for a while. But now it's gone back to saying 'Camera failed' and won't allow you into settings like last time. Is there anything that I can do without having to take it in for repairs? I'll list the details like the others seem to do, but let me know if I've missed something
Firmware version - 2.2.1
Baseband version - I9000XXJPY
Kernel version - 2.6.32.9 [email protected] #1
Build number - FROYO.XWJS7
I have updated it with Samsung Kys already...
Thanks a million......................
..............All the best!!!
Ps- I don't know what you guys mean when you say 'flash' it.....so back to basics if poss!!!
hi
i am having issue with my galaxy s6 edge G925T phone was working properly battery got runt out so after when i charged and did power on after phone is not powering on and got bootloop
i found a post regarding this on xda forum followed that all method as they mentioned but unsuccessful
before i had the same model and got the same issue after when i flashed compatible kernel on g925t problem was sorted out , but with this phone same model when i flash kernel to get it out from boot loop then
the kernel doesn't get flashed and i get the following message as in the pictrue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same thing happened to me flashing a Tmobile rom. To prevent this you need to go through the setting and allow unlocked bootloaders (or something like that, currently flashing my phone to look it up) but this will prevent this lock from triggering. How I got past this? Odin'd back to stock and flashed everything again.
Bro phone doesn't go to main windows how I can go to setting it's only stuck on bootloop
Have you tried flashing the stock image in odin?
Stock rom from sammobile?
Yeah, you'll need to get familar with the hardware keys and how to boot into download mode with them. Typically I'd link you with instructions but I think googling it yourself will do you some good. Do some research and be sure to answer nicely to those who offer help.
I have an old Galaxy S3 GT-I9300 device
it got bricked and the charging port is broken .
the recovery will not open and will go back to splash screen
to charge the device i use a battery charger dock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how can i flash and unbrick it?
please help...
musicmate said:
As far as you described the circumstances, there is no Option to Unbrick it.
But Why?
Except from the Recovery Mode there is the Download Mode to Flash Software/Tools (e.g. Bootloader, Recovery, ROM):
-> One Option ist to access the I9300 via Download Mode and ADB/Odin, but without a working USB-Port... .
-> Another Option is to access via Wireless-ADB (Network-IP-based ADB), but to activate it, you'll have to get into the ROM's Settings (Developers-Options). Therefore you'll need an working ROM, which didn't seem so... .
-> Last possible Solution: Get in touch with Microelectronics and solder a new Micro USB Port to your Phone.
Otherwise you'll now have new opportunities to use your I9300 as:
Decorative Night Light/ Paperweight/ Doorstopper...
(Annotation: The Battery Charging Dock won't help, 'cause it's construed for standalone loading accumulators.)
Click to expand...
Click to collapse
mega oof
i hope put this to work today
AmberKat said:
mega oof
Click to expand...
Click to collapse
i hope put this to work today, and post here for you and others
board swap it
Hello,
I try to flash this image to my phone with TWRP.
[N960X]+Superstable+UI2.5+V13.zip
After reboot itself this error message came up, and wont boot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unable to enter recovery mode too.
I think is dead
Is it possible to reapir somehow?
I have riff box, but if i need any tool please let me know. Or any soultion
Thank You very much
I think your device could pretty easily be fixed by just reinstalling the stock ROM through Odin.
Follow these simple steps:
Download stock ROM from SamMobile. Here is a direct link to your device. Simple select the right firmware for your phone and download.
Download flashing tool, in this case, Odin. Make sure to download it from a reliable source as 3rd parties sometimes do include viruses.
Boot your phone into download mode by pressing the Volume down and Bixby button at the same time as you plug in the USB-c cable.
Use Odin to flash all the stock firmware files except for the HOME_CSC one.
Congrats you have successfully recovered your phone. Now give yourself a well-deserved pat on the back.
Also, please place your thread in the right forum in the future. That way you can get help much quicker.
If this answer did help you, please mark it as the solution as it help people in the future.