Database Develop

Overclocking kernel for CM 5.0.7/8?

Hello,
I´ve searched for a overclocking kernel for the latest CyanogenMod to increase cpu clock up to 652Mhz (or at least: to try it). I have found the "UNIVERSAL OVERCLOCK for ANY ROM-- Wifi Fixed Version 2.0.1".
It works, but wifi won´t start anymore. Are there other kernels to try?

The only one I've seen and tried is on droidbasement site, I think.

matrixritter said:
Hello,
I´ve searched for a overclocking kernel for the latest CyanogenMod to increase cpu clock up to 652Mhz (or at least: to try it). I have found the "UNIVERSAL OVERCLOCK for ANY ROM-- Wifi Fixed Version 2.0.1".
It works, but wifi won´t start anymore. Are there other kernels to try?
Click to expand...
Click to collapse
Same thing happened to me with that kernel... thatnks to a Nandroid backup I was able to go back to normal. Still looking for a god multitasking kernel.

I'm not sure why you're having a WIFI issue.
I am using a 5.0.8 ROM with the 2.0.1 OC Kernal on my MyTouch3G and it is working perfectly.
I also tried it with multiple Donut ROMS and it works perfectly. Maybe try a full wipe a reflash? Or maybe try a CyanogenMod Rom to test.

[kernel][290911] NeoBlaze Kernel for stock/MCR - Now works on Gingerbread

NeoBlaze Kernel for stock/MCR
Click to expand...
Click to collapse
​
Information about kernel, really, this contains everything (almost)
This is based on the newly released LG v10e kernel sources. Now works on both Froyo and Gingerbread stock and MoDaCo based ROMs. Will not work with CyanogenMod based ROMs.
There are 2 versions now, ext3, and a separate ext4 version. Make a backup before flashing especially the ext4 version, in case if it goes wrong.
Features:
- EXT4 built in (finally)
- OC/UV support, overclocking upto 1400 mhz - use pimp-my-cpu (other apps may not work)
- SDRAM, VDE and GPU overclock
- Voodoo Sound
- BFQ I/O scheduler
- SLQB Memory Allocator
- CIFS, TUN
- few other little tweaks inc some designed to improve battery life
- new wireless.ko module
Credits
- Cpasjuste for work on oc/uv, and learnt a lot from his posts etc.
- Beene for some of the tweaks to improve battery life
INSTALLATION
- Be sure to REMOVE "boot settings" from Pimp My Cpu before installing the kernel to reset default values.
1. reboot to CWM
2. Clear cache
3. Advanced, clear Dalvik
4. install zip from SDcard
5. Reboot
DOWNLOAD
make sure you back up before installing, just incase something goes wrong..
280911 - froyo & gingerbread (doesn't change mount)
280911 - EXT4 FROYO
- Fixed bfq i/o scheduler
- stock voltage at boot (1000mV)
- halt avp when entering suspend
210911b - EXT3 (froyo & gingerbread)
210911b - EXT4 FROYO ONLY
- now works on gingerbread ROMs (thanks to koush, benee and rusty for their work on AnyKernel flasher) (also heads up to TopoGigi for first running it on 2.3)
- touchscreen tweaks, battery tweak
- fixed touchscreen bug
150911
- BFQ now default I/O scheduler
- OC/UV is back
- default clock speed 1015MHz, 950mV
130911
- Added BFQ I/O Scheduler
- Tegra2 specific compiler optimization
- Added SLQB Memory Allocator and made it default allocator
- lowmemorykiller: only check cache for thresholds (Brian Steuer)
- CIFS, TUN
120811 - normal version
120811 - lower OC values
- removed USB accessory (wasn't working properly anyway)
- enabled RNDIS
- fixed init.d permissions (hopefully will solve bootloops)
- added a version with lower oc value - upto 1200Mhz
090811
- Voodoo sound added (thanks supercurio)
070811
- change to UV/OC values
- SDRAM, VDE and GPU overclock (thanks vork and morfic)
- fix for proximity and accelerometer sensor
- USB accessory mode enabled
050811b
- optimised app killing (thanks beene)
- 8 step clock speeds and volts - same as in vorkkernel (hopefully will fix some of the bootloops)
- overclock upto 1400mhz
- compiled with toolchain 4.4.3
040811
- included init.d (thanks ilos for the heads up) - should fix some of the bootloops
030811
- initial release
My Github here
NB: I was building this as part of my learning process, and thought I would share it since V10E kernel doesn't have ext4 support yet. Please take it easy on me, i'm still learning
If you like it dont forget that 'Thanks button'

Thanks!
I will test it!

will this work on fr19???

Thanks a lot for the kernel. Flashed some moments ago and so far no issues.
System feels very smooth, 3g, wifi and bt are working fine.

Kickasskev said:
will this work on fr19???
Click to expand...
Click to collapse
Yes it will, but always good to back up just in case.
Sent from my LG-P990 using XDA App

I have flashed it on my djdroid 0.6 and it works very well atm...
OC is max @1.2ghz.
Thank you Imperticus!

What tool can I use to convert ext3 to ext4?
BR.

flashed on stock V10e => stuck on LG logo ( with progress bar )

ilos said:
flashed on stock V10e => stuck on LG logo ( with progress bar )
Click to expand...
Click to collapse
That's strange, because this is based on the stock v10e kernel. I've only tried it on Modaco based ROMs. Sorry, I can't think of a reason... I'll look into it. Did you manage to flash any other ext4 kernels?

yukkio said:
What tool can I use to convert ext3 to ext4?
BR.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1137218

that's a problem i have each time i try to flash a custom kernel on a stock rooted rom that's happened since v10b ( c , d , etc.... ) same problem with cpajuste kernel , mck kernel.... Paul from Mocado doesn't known where is the problem too...

ilos said:
that's a problem i have each time i try to flash a custom kernel on a stock rooted rom that's happened since v10b ( c , d , etc.... ) same problem with cpajuste kernel , mck kernel.... Paul from Mocado doesn't known where is the problem too...
Click to expand...
Click to collapse
Thats very strange. is that specific to you?
Sorry to say, but is Paul can't find the problem, then I surely won't.

i'm not the only one , take a look here : http://android.modaco.com/topic/340...-ocuv-kernel/page__view__findpost__p__1705341

ilos said:
i'm not the only one , take a look here : http://android.modaco.com/topic/340...-ocuv-kernel/page__view__findpost__p__1705341
Click to expand...
Click to collapse
From what i read so far, seems like a few models can't support kernels that has overclocking over 1200mhz. is that what you experienced?

Imperticus said:
​
This is based on the newly released LG v10e kernel sources. It will only work with stock/Modaco based ROMs. Will not work with CyanogenMod based ROMs.
Features:
- EXT4 built in (finally)
- UC/OV support, overclocking upto 1300 mhz - use pimp-my-cpu (other apps may not work)
- deadline I/O scheduler
- few other little tweaks inc some designed to improve battery life
- new wireless module
- more to come..
Credits
- Cpujuste for work on oc/uv, and learnt a lot from his posts etc.
- Beene for some of the tweaks to improve battery life
DOWNLOAD
make sure you back up before installing, just incase something goes wrong..
NB: I was building this as part of my learning process, and thought I would share it since V10E kernel doesn't have ext4 support yet. Please take it easy on me, i'm still learning
If you like it dont forget that 'Thanks button'
Click to expand...
Click to collapse
sorry if you think im picky but is this right, whats highlighted in red above???
Under Clock/ Over Volt
should it not be
Over Clock/Under Volt

Kickasskev said:
sorry if you think im picky but is this right, whats highlighted in red above???
Under Clock/ Over Volt
should it not be
Over Clock/Under Volt
Click to expand...
Click to collapse
I'm sure you know when i meant - corrected 1st post

Imperticus said:
I'm sure you know when i meant
Click to expand...
Click to collapse
hehehe i did say i was being PICKY, but thanks it's does work on FR19

it's says on the first post it goes up to 1300mhz, but on the pimp my cpu it only goes to 1200mhz.
Am I just being picky again???

Kickasskev said:
it's says on the first post it goes up to 1300mhz, but on the pimp my cpu it only goes to 1200mhz.
Am I just being picky again???
Click to expand...
Click to collapse
That my friend is what we call a bug lol..the kernel itself has capacity to go to 1300mhz, but for some reason doesn't show up here. I'm working to fix that.

thats no problem, runs great anyway cheers

CM9

Hello. Loving the nightly builds. When will we get the over clocking function back? I miss the extra 300MHz I used to get.

Rooted phones can have that feature by using market apps . There are quite a few overclocking apps out there .

I used to use Antutu but this does not work. I'm sure they disabled the ability in the builds.

Maybe just flash another kernel? eg. Devil2 or Icy Glitch

I guess I could. I'm a little hesitant too change from the defaults. In the earlier builds OC was enabled and fine for me. Just wondering if it was set to be re-enabled.

You can flash Devil kernel 0.67b and OC via NStools.

[Kernel/Recovery][P75XX] A1 Kernel V1.9/TWRP2.6.3.0

:good: First of all :good: Thank you for your patronage!!! :laugh::victory:
Before you do anything: This is purely at your own risk and I will not be responsible for anything that happens to your tablet. I flashed it on mine at my own risk.
Compatibility Information: There are 2 different versions. 1 for stock and 1 for Cyanogenmod. Even though the kernels are intended for the 3G tablet it will work just fine on a WiFi only tablet (like mine). This makes the build process less messy.
**Sources Fully documented v1.9 beginner friendly sources now available including the build script. If more explanations are required, please say so. However, remember that the explanations are not intended to be a blind step by step instructions of going from samsung source to A1.
TWRP V2.6.0.0: Please read: do not worry about any kind of "E:A: Render Error". This is a side effect of removing some image files to save place on the recovery image so it will fit on the 5MB. The error simply means it failed to show (render) and image file that it is looking for. This is not harmful at all. If you can't flash the recovery please try the dd method.
V2.6.0.0 3G Download
V2.6.0.0 Wifi Download
V2.5.0.0 3G Download
V2.5.0.0 Wifi Download
TWRP V2.6.3.0: There are no more E:A Render errors. All graphics that were removed are there. Also, the recovery will install supersu if no root is detected. That feature has also been restored. The kernel has been stripped of anything not recovery related to shrink it down. It also has selinux support which allows the "set_metadata" zip installation to work. The download is in the attachments below.
Changelog:
Changelog:
Voodoo sound <-- new to version 1.0
USB charging enabled as well as charging from other chargers *** fixed V1.5.4 thanks to pershoot
Overclock to 1.2GHz <-- new to version 1.2
NTFS modules enabled, ondemand default frequency scaler, noop default disk io scheduler <-- new to version 1.2.1
GPU overclock from 333MHz to 400MHz. <-- new to version 1.3
Overclock to 1.4GHz <--new to version 1.4
Support for Current Widget <-- new to version 1.5
CIFS enabled in kernel config, 1.4GHz attempted stability fix (thanks to jaswinky) <--new to version 1.5.2
Wifi driver compiled as module <--new to V1.5.3
More voltage anomalies fixed, updated battery driver to pershoot's 3.1 <-- new to V1.5.4 and V1.5.5XE
Fixed charging boot bug <--new to V1.5.6SE
(In case you were wondering 1.5.7 had an issue in it.)
Disabled frequency lock, added 1GHz default max (you can change it to 1.2GHz or 1.4GHz after boot), 216MHz default min CazeW's suggestion <--new to 1.5.8SE+XE
Enabled pershoot build/vfp optimization commit, added 150MHz minimum frequency <-- new to 1.5.9SE+XE
Boot script support (put yours as /data/local/a1init.sh) <-- new to V2.0
Smarter ram disk that only initializes 3G on 3G tablets<-- new to V2.1
1.5GHz && 1.6GHz OC available, cifs utf8 kernel module available <-- new to V2.2
Support for CM9 <-- new to V2.2CM
Enabled xbox controller module as xpad.ko <--new to V2.2.1
NTFS moved to kernel module instead of built in, CIFS moved to kernel module instead of built in, enabled option.ko and usb_wwan.ko for connection of 3G dongle, all nls charsets/codepages built as modules <--new to V2.2.2
V1.6.3 is pretty much V2.2.2 but without my custom ram disk. I've also tried a boot script method proposed by Toldo but haven't had time to test it yet. Please flash the CM9 stock kernel or Samsung stock kernel before trying V1.6.3.
Applied git patch to disable mmc_cap_erase <-- new to V1.6.4
Voltage control, cifs built in again <-- new to V1.7
Galaxy Tab 8.9 specific fix <--new to V1.7.1
Cyanogenmod charging mode fix <--new to V1.7.2
Galaxy Tab 8.9 specific feature <--new to V1.7.3
CM10 compatibility fix, enabled Samsung's powersaving governor <--new to V1.7.4
followed pershoot's "-defconfig: jb: unset TEGRA_CONVSERVATIVE_GOV_ON_EARLYSUPSEND" change to fix odd 450MHz capping issue <--new to V1.7.4b
Copied in pershoot's keyboard dock driver <--new to V1.7.5
801MB RAM enabled <-- new to V1.8
Rebased on pershoot's November 17 source <--new to V1.8.1
Back to samsung base, follow pershoot's suggestion of Nexus7 mtp drivers to fix mtp, enabled zRam <--new to V1.8.2
Reduced RAM to 785MB to prevent intense 3D games issue, enabled KSM (check in settings --> performance --> memory management)
(CM Version only) works on CM10.1 <--new to V1.8.4
Incorporated touchscreen death fix. Thank the user who reported it. <-- new to V1.8.5
Used part of pershoot's kernel config to get data usage working in CM <--new to V1.8.6
Added CM's version of the ROW (read over write) disk IO scheduler for GT-I9300<-- new to V1.8.7
Added XDA's grzwolf's solution to the hsic wakeclock problem <--new to V1.8.8
Added frandom kernel module <-- new to V1.9
Credits:
Supercurio: voodoo sound
Pershoot: voodoo port, usb charging, flashable zip, OC template, current widget setup
XDA forum's CazeW: used your replace suggestions to patch up wm8994_voodoo.c and wm8994_voodoo.h so it will compile properly, and finding the missing link for 1.4GHz OC, and disabling frequency locks
Task650: providing a nice, clean deodexed rom for me to try this on
XDA forum's RaymanFx: OC instructions
Me: GPU OC
XDA forum's jaswinky for valuable hints and checking my work over.
Xoom ICS kernel: for getting an approximate idea of voltages
(If I missed any credits, please forgive me as this is my first attempt at any kind of development)
XDA forum's motley for voltage control
XDA forum's Unknownzd for mmc_cap_erase patch
XDA's grzwolf for the hsic wakelock fix

Great to see someone else kernel developing, could be the start of something here... Lol, I wanna give this a try but I think It'll stop 3G working if I flash the 7510 kernel.
Sent from my GT-N7000 using Tapatalk 2

RavenY2K3 said:
Great to see someone else kernel developing, could be the start of something here... Lol, I wanna give this a try but I think It'll stop 3G working if I flash the 7510 kernel.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Care to try the 3G version I just uploaded? I don't own the 3G version but I followed the same idea for compiling the 3G kernel.

Welcome, nice of you to come to the party
Is there really no one that can test and leave test reports? If i would have been on sammy rom i`d been all over this.
Good luck dev

Flashed, wifi,3g and voodoo working,
well done.... Will test more for you and report back
Sent from my GT-P7500 using Tapatalk 2

kashortiexda said:
Flashed, wifi,3g and voodoo working,
well done.... Will test more for you and report back
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for your bravery!

Working on my 7500 even feels a little quicker too

Dang, you move quick, I've installed it but, how did you get the voodoo app to recognise the device as supported?
Scratch that, it was me being an idiot
Sent from my GT-N7000 using Tapatalk 2

Works fine on my P7500.( Voodoo, 3G and Wifi) Good work, Thnx!

3g + 1.1
all working great, including usb charging, 3g, wifi, and voodoo whilst device ON....finally !

Awesome. After flashing kernel, my useless wall chargers work. It is very smooth too. Great job.
Sent from my GT-P7510 using xda premium

Finally, the modified kernel!
Voodoo works perfectly.
It can even overclock the CPU to make and perfect kernel.
Maybe 1.6GHz.: D

XTeK2 said:
Finally, the modified kernel!
Voodoo works perfectly.
It can even overclock the CPU to make and perfect kernel.
Maybe 1.6GHz.: D
Click to expand...
Click to collapse
Overclocking abilities is quite a tall order for my current "skills". After looking at the instructions on how you would do it, the process looks much much more involving than just a manual patch job. Weird thing is that after an initial read through of the instructions it looks like a 1.2Ghz overclock code is in the kernel source but I'm not sure why it's not turned on.

kusgan said:
Awesome. After flashing kernel, my useless wall chargers work. It is very smooth too. Great job.
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
I was quite surprised to discover that the charger that comes in the box of the galaxy tab 10.1 actually sends some kind of "green light" to the tablet to begin charging. If the tablet gets the box charger it actually records "samsung charge !!!r" before activating the charging. If any other charger is connected the tablet records "invalid charger !!!" and disables charging in the next line of code. I just changed it so that it will record "other charger" in stead of invalid and enable charging after recording. (yes, the original code had those exclamation marks after charger).

is it ok with task ics rom ?

zerong said:
is it ok with task ics rom ?
Click to expand...
Click to collapse
You mean the task650 one? Of course it is! That's the only stock ics rom I've ever flashed on my tablet. I credited task650 in my first post for providing a clean deodexed rom to test on.

AAccount said:
You mean the task650 one? Of course it is! That's the only stock ics rom I've ever flashed on my tablet. I credited task650 in my first post for providing a clean deodexed rom to test on.
Click to expand...
Click to collapse
Yes task650 ! all is ok with your kernel ? i dont know if i have to wait a pershoot kernel for stock ics rom in order to enable voodoo sound and overcloking !

zerong said:
Yes task650 ! all is ok with your kernel ? i dont know if i have to wait a pershoot kernel for stock ics rom in order to enable voodoo sound and overcloking !
Click to expand...
Click to collapse
Yes, everything seems to be ok with the task650 rom. There is no overclocking available currently but voodoo is working.

Can i return to stock kernel if all isnt good? So where can i find a ics stock kernel ?

zerong said:
Can i return to stock kernel if all isnt good? So where can i find a ics stock kernel ?
Click to expand...
Click to collapse
From the nandroid backup you make before flashing anything.
I don't think a package has been made yet for ICS boot.img.

[KERNEL][CM10] CM10 kernel for ICS bootloader (RAM hack,OC)

This kernel is no longer being updated. Please refer to kowalski kernel thread for CM10 ROMs.
Presenting CM10 kernel built from source with ramhack and OC/UV support by wkpark
Only for the new (unlocked ICS) bootloader!
This is RC's kernel, with patches by wkpark for ramhack and OC/UV. Supports OC upto 1.5 GHz.
Thanks to them for all their work. Also, thanks to pengus77 for bringing CM10 to the new bootloader
Built using my guide over here
Uses spica's HP supersonic toolchain
Works with CM10/MIUIv4 ROM on new bootloader only
Download links:
New and recommended powersaver version!
Includes pengus77's wifi drain fix (All credit to him for that)
Non-OC, to increase battery life and stability
RAM hack values 24 MB, 32 MB, 48 MB for increased smoothness
New experimental governors are absent in this ROM, which is meant to be a stable version for daily usage. The new governors have not been properly tested yet and are unlikely to be used by most of the users. They may be included in later builds after more testing. If you want to use them, flash the experimental kernel on the previous page.
This is the version recommended for daily usage. Try the 48 MB one first, and if camera gives problems, then try a lower RH value.
Download link for stable, powersaver version
Link to latest experimental version
Download link for older experimental versions
This is the link to my folder with all kernels for the new bootloader so far, in case you want to try some other version. Ramhack values are mentioned in the file names, and if it supports OC (not every phone will like OC) it is also mentioned in the file name.
Thanks to RC and wkpark, this would not be possible without them.
Warning:
I am not responsible if anything goes wrong with your phone.
If your phone does not like OC/UV, or freezes when overclocked, reduce the max frequency or dont use the OC version of the kernel.
If apps like camera give problem, try to use a version with reduced ramhack value.
To be flashed over the ROM without wiping data. Wipe only cache and dalvik cache
If you are having problems with the new kernel and wish to revert back to the stock kernel, flash your ROM again
Credits:
arcee and the rest of the CM team. Its their work it is based on
Donate to RC
wkpark for cracking the bootloader, new his patches, without which, there would be no ramhack or OC/UV
Donate to wkpark
pengus77 for bringing CM10 to the new bootloader and wifi battery drain fix.
This wouldn't be possible without him
spica1234 for his wonderful HP Supersonic toolchain
benee for his anykernel updater for star, and for all his work
Other devs for all their work (PM me if I forgot someone!)
Source: https://github.com/rugglez

Changelog:
29/12/12:
New version built with spica's supersonic HP toolchain
Integrated pengus77's latest (v3) wifi drain fix + bsod fix
27/12/12:
Experimental version released with new CPU governors (smartass v2 and hotplug), and simple I/O scheduler (default is still cfq), max frequency=1.2 GHz
Power saver version released without OC or new governors, and with pengus77's wifi battery drain fix
26/12/12:
Initial release
Max clock frequency is 1.5 GHz

Trying the 32mb oc kernel, seems ok so far, will report back any oddities,
I'm on penguss cm10.

i tested..............

Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Regards,
Orgler

Thank u guy's! i will try new_CM10_kernel_1225_32M_OC.zip and report back!

angel_boulevard said:
i tested..............
Click to expand...
Click to collapse
And....?
orgler said:
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Click to expand...
Click to collapse
You could try it with cm10.1 but im not sure if it would work. Take a backup first. Wifi drain patches will be included with his permission and when he feels it is the right time (after the testing phase and all)

thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time

included wireless.ko is the one patched by pengus? thank you in advance
edit: just checked, it's not the patched one

First impressions are good! Not much room for UV as 1ghz is already at 1000mV which is quite low already I think? But that is not important, just an observation.
Thanks Rugglez. Been waiting a while for an OC kernel on CM10 and no call bug either. This is the future for our phone I think.

I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
I just checked with "CPU spy" and yes it is hitting 1.5Ghz even though I have it set lower than that.

Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
anjo88 said:
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
Click to expand...
Click to collapse
Thanks for the idea, will add it.

rugglez said:
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
Thanks for the idea, will add it.
Click to expand...
Click to collapse
So we waiting to test

Can you put in the next update some more CPU governers and I/O scheduler?

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Took one pic and gallery FCed and phone soft rebooted.
With OC 32mb kernel camera and video recording is working.
Sent from my LG-P990 using xda premium

lgnd said:
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I do a OC with default cm10 function and on antutu say 1200!

Sorry for being off topic. I really salute new generation of developers for optimus2x who never let us feel our main devs/modders have left. You guys are doing a fabulous job. Thanks to you all.

Gps does not working.
Tested with igo and maps.
Sent from my LG-P990 using Tapatalk 2

rugglez,
Please add pulse boost and hotplug governor. Thanks.