Database Develop

Cannot install custom kernels

Whenever I tried to install CF - Root (For JVT Firmware) or Speedmod through Odin, it installs but quickly says fail which then leads to the
Phone.....!.... Computer image. For me to fix the issue, I have to re-flash the ROM.
Is there anyway to install Kernels without having Odin to say fail?
I heard on one website that they say it may be Bootloaders that are causing the issues.

u have a bad connection to pc. maybe cable or phone plug

pch.radu said:
u have a bad connection to pc. maybe cable or phone plug
Click to expand...
Click to collapse
I agree on that since I try the connections on my computer and Odin doesn't pick up on COM 1 untill I plug one in a specific USB port it works....
Funny thing is, the connections I haven't had a problem for flashing either JVT through One Click Hemindall or manually on Odin but for Kernel, it always fails.

try that... http://forum.xda-developers.com/showthread.php?t=1347899.
You can put kernel on sdcard and flash it this way.

spamtrash said:
try that... http://forum.xda-developers.com/showthread.php?t=1347899.
You can put kernel on sdcard and flash it this way.
Click to expand...
Click to collapse
My phone isn't rooted. Tried to install CF - Root before but it failed.

Market, pro version, contains root...
Sent from tam-tam drum

Another question,
Could this be a simpler way to flash the root files or Kernel in?
Go to my Android 3e Recovery and flash them via SD card?
Or is CWM really neeeded to do this?

Again, mentioned by me soft contains CWM ...
Sent from tam-tam drum

spamtrash said:
Again, mentioned by me soft contains CWM ...
Sent from tam-tam drum
Click to expand...
Click to collapse
Sorry, couldn't understand what you were saying in the last post.
By software you mean CF-Root or the custom kernels?
Sorry for being a noob here....
But those softwares can't be installed VIA Odin, because it pops up FAIL.

[Q] Lost my root and CWM after updating

Dear All
I Lost my root and CWM after updating my SGN stock rom
I have now the following Version (in Pic)
What to do to root this update and get CWM with it?

thermax04 said:
Dear All
I Lost my root and CWM after updating my SGN stock rom
I have now the following Version (in Pic)
What to do to root this update and get CWM with it?
Click to expand...
Click to collapse
You always loose root after flashing stock firmware! Should have flashed it with MobileOdinPro.
If you want root again, downgrade to a directly rootable rom (all versions till KL7) and reroot it with CFRootIntitialFlasher by Chainfire, thread http://forum.xda-developers.com/showthread.php?t=1331784

gee2012 said:
You always loose root after flashing stock firmware! Should have flashed it with MobileOdinPro.
If you want root again, downgrade to a directly roorable rom (all versions till KL7) and reroot it with CFRootIntitialFlasher by Chainfire, thread http://forum.xda-developers.com/showthread.php?t=1331784
Click to expand...
Click to collapse
I have the same problem with thermax, and I still can't reroot it even after downgrading it.
any solutions?

ax-ed said:
I have the same problem with thermax, and I still can't reroot it even after downgrading it.
any solutions?
Click to expand...
Click to collapse
What is Thermax?

i have the same problem "like" thermax(thread starter)
sorry, bad english

you will need to use odin to flash an older stock rom, root it then use mobile opdin to flash the latestst stock version

gee2012 said:
What is Thermax?
Click to expand...
Click to collapse
He means that he has the same problem like me (my name is Thermax04)

Richy99 said:
you will need to use odin to flash an older stock rom, root it then use mobile opdin to flash the latestst stock version
Click to expand...
Click to collapse
I have flashed to KL3, but i failed at rooting it.
idk why, but the doomlord zerg v4 i used to root before won't work.

Just pick and download a stock rom from here (till KL7) http://www.sammobile.com/firmware/?page=3. Flash with Odin and reroot with InitialCFRootflasher http://forum.xda-developers.com/showthread.php?t=1331784 and you`re done
---------- Post added at 02:01 PM ---------- Previous post was at 01:59 PM ----------
ax-ed said:
I have flashed to KL3, but i failed at rooting it.
idk why, but the doomlord zerg v4 i used to root before won't work.
Click to expand...
Click to collapse
Do you have usb-debugging enabled and ticked unknown sources in applications?
---------- Post added at 02:03 PM ---------- Previous post was at 02:01 PM ----------
Just read this thread http://forum.xda-developers.com/showthread.php?t=1331784 once or twice and follow it to the letter and it can`t go wrong

I have ticked both, done the instruction precisely(very short steps), and still fails
after the zerg phase, it says
/dev/block/mmcblk0p5 : cannot open for write: Permission denied
---cleaning up
---rebooting
and it is still unrooted

gee2012 said:
You always loose root after flashing stock firmware! Should have flashed it with MobileOdinPro.
If you want root again, downgrade to a directly rootable rom (all versions till KL7) and reroot it with CFRootIntitialFlasher by Chainfire, thread http://forum.xda-developers.com/showthread.php?t=1331784
Click to expand...
Click to collapse
I was on rootable stock rom JPKK2 before and managed to root it and flashed the cwm, then I upgraded to LA1 rom, should I downgrade it or what? it is not clear to me since Iam new with Samsung

thermax04 said:
I was on rootable stock rom JPKK2 before and managed to root it and flashed the cwm, then I upgraded to LA1 rom, should I downgrade it or what? it is not clear to me since Iam new with Samsung
Click to expand...
Click to collapse
So reflash KK2 with Odin and reroot it! and after that if you want to update stock firmware use Mobile Odin to flash and keep root and CWM

gee2012 said:
So reflash KK2 with Odin and reroot it! and after that if you want to update stock firmware use Mobile Odin to flash and keep root and CWM
Click to expand...
Click to collapse
If I reflash KK2 would it keep all my stuff (contacts, apps, settings) or it will be as format?
Is there any other easier methods to root the LA1 or wait for it?
Iam new with Samsung and Odin, and read somewhere that mobile Odin will intact the 0 flashing (or something means that)
And also read that all flashing can be done via windows Odin (easier for me to deal via pc than mobile screen size)

thermax04 said:
If I reflash KK2 would it keep all my stuff (contacts, apps, settings) or it will be as format?
Is there any other easier methods to root the LA1 or wait for it?
Iam new with Samsung and Odin, and read somewhere that mobile Odin will intact the 0 flashing (or something means that)
And also read that all flashing can be done via windows Odin (easier for me to deal via pc than mobile screen size)
Click to expand...
Click to collapse
No LA1 cannot be rooted directly unless you don`t care about raising the binary flash counter. I think KK2 is a wipe rom so yes you will losse everything on your internal disk, so copy the entire disk with windows task manager and put it back after you flashed KK2.
Odin can only be used with stock firmware, kernels or csc files, not custom files.
And try to read up about rooting, flashing and such things. There are threads enough around here.
Good luck

gee2012 said:
No LA1 cannot be rooted directly unless you don`t care about raising the binary flash counter. I think KK2 is a wipe rom so yes you will losse everything on your internal disk, so copy the entire disk with windows task manager and put it back after you flashed KK2.
Odin can only be used with stock firmware, kernels or csc files, not custom files.
And try to read up about rooting, flashing and such things. There are threads enough around here.
Good luck
Click to expand...
Click to collapse
according to what I understood from you so far:
1 - I will reflash the Original stock rom KK2 by PC Odin
you said that KK2 will wipe my mobile and I should make a backup for my internal disk, So, Sorry to ask: what is this (windows task manager) and how to use it?
2 - I will root the KK2 same way I did last time
3 - I will flash the new update LA1 via Mobile Odin and it will keep my root and CWM
Does Mobile odin come in free or paid?

thermax04 said:
according to what I understood from you so far:
1 - I will reflash the Original stock rom KK2 by PC Odin
you said that KK2 will wipe my mobile and I should make a backup for my internal disk, So, Sorry to ask: what is this (windows task manager) and how to use it?
2 - I will root the KK2 same way I did last time
3 - I will flash the new update LA1 via Mobile Odin and it will keep my root and CWM
Does Mobile odin come in free or paid?
Click to expand...
Click to collapse
1. yes reflash KK2 using PC odin, I dont know wether KK2 is wipe version, if it is wipe, even you won't lose data on internal SD card, no meaning to take backup with window. If you want to backup your installed app + data, you must have Root.
alternatively you can choose non wipe version to reflash (e.g. KL3 india) it won't delete anything.
2. You have to Root Your relashed ROM (you can find how to Root guide on my signature)
3.Mobile Odin Pro is paid. Dont want to pay for mobile Odin Pro/ unable to purchase it, you can get Root + CWM, then update LA4 using CWM ( you may get installation guide link from my signature)
I will recommend to read all 4 links(first 2-3 post) on my signature,you will find answer of most of your questions

what if i tried to root my new ROM (LA1) using doomlord rooting kit, failed, and then downgrade it to KL3?
can i still use the doomlord easy rooting kit?
i tried this few times yesterday, but it still won't get rooted.

Ok, I reflashed by PC Odin my original stock rom KK2, and it was not wipe, I found everything is intact
But when I tried to root + recovery like before, did not work although I get on the screen (all done) but after reboot no root or CWM
I reinstalled Kies but still alot of errors when trying to do the rppt only or root+CWM
What should I do?
is there any way that I can wipe my phone and start as fresh as I can? what I did is :
boot to recovery and chooses wipe cache partition and Factory reset, it is all or there is something else can be done?
Edit : The wipe did it, and I have root and CWM now

Rooting problem
ax-ed said:
I have ticked both, done the instruction precisely(very short steps), and still fails
after the zerg phase, it says
/dev/block/mmcblk0p5 : cannot open for write: Permission denied
---cleaning up
---rebooting
and it is still unrooted
Click to expand...
Click to collapse
Turn off your antivirus temporarily as it removes some components of your rooting tool which causes the error message.

ax-ed said:
what if i tried to root my new ROM (LA1) using doomlord rooting kit, failed, and then downgrade it to KL3?
can i still use the doomlord easy rooting kit?
i tried this few times yesterday, but it still won't get rooted.
Click to expand...
Click to collapse
Yes you can use doomlord method after downgrade.
check USB debugging on, close any PC sync SW, close Firewall, close antivitus. Try another PC.

[Solved] Reset binary counter and remove yellow triangle without a jig when bricked

Please read this first:
I was able to reset the binary counter and remove the yellow triangle by using the method described in #13 of this thread, but you should understand that my phone was already soft-bricked. As you will know from reading posts #18 and #21, that the Angelom kernel 1.2 should be used to reset your binary counter and remove the yellow triangle, ONLY WHEN your device is ALREADY bricked, otherwise you may brick your working device. Be cautioned.
Original post:
I have been struggling for two days now with an issue of some kind of brick. Without going into whether it is a soft brick or a hard brick, this is how my situation is:
- I can boot into download mode
- I can boot into stock recovery mode
- I am unable to flash any ROM as all of them get stuck at factoryfs
- I flashed several kernels, stock as well as custom, and the latest kernel I flashed was a CF kernel
- After flashing the CF kernel, I saw the yellow triangle at the Samsung boot prompt and the flash counter increased by 1
- I flashed a stock kernel over the CF kernel which made the yellow triangle go away, but I still have the flash count increased
I do not wish to go for any trial and error methods now, so I am thinking of sending my Note to Samsung for repairs. Can someone help me with resetting the flash counter to 0? I do not wish to sound impatient, but I really do not have much time to wait for the JIG solution, so if someone can help with resetting the flash counter without using JIG, it would greatly help.
I have insurance on my phone and I bought the phone a week ago. Please also let me know if I can use my insurance if Samsung decides to charge me. Ideally, I would like a replacement, as it is a confirmed bug from Google that caused my phone to be bricked, and also since I have had the phone only for a week, but I don't know how to convince the seller I need a new phone, as they will try to get it fixed and return the same back.
Is there anything else other than the flash counter that I should wipe/reset before sending it to Samsung? I took a Nandroid backup of a stock odexed GB ROM last week which is under a folder called "CWM". Is the CWM folder in the internal storage (USB storage) or the external SD card? If it is in internal, how do I wipe it? My phone doesn't have any battery so I can't check the location of CWM folder myself.
Thanks.

If you can still enter download mode, there is hope to flash a stock rom.You need the pit file,matching your device version(16 or 32 gb). Also a bootloader wouldn't hurt to have around.
I got 3 errors when i first tried to flash my note,but i solved it with the pit file.Just google for it.

kimitza said:
If you can still enter download mode, there is hope to flash a stock rom.You need the pit file,matching your device version(16 or 32 gb). Also a bootloader wouldn't hurt to have around.
I got 3 errors when i first tried to flash my note,but i solved it with the pit file.Just google for it.
Click to expand...
Click to collapse
I have tried flashing stock ROMs but none of them came with a PIT file or a bootloader. I have tried installing a stock bootloader too, by itself, but nothing allows me to go beyond factoryfs. Are you saying flashing a stock ROM with a matching PIT can make the difference?

There's a sticky thread in Development called
How to reset your counter.

chasmodo said:
There's a sticky thread in Development called
How to reset your counter.
Click to expand...
Click to collapse
Thanks, I know about it, but I do not have the time to buy the JIG, wait for it and try it out on my device, if that's what you refer to. I am in a time crunch as my 15 days of purchase of this phone will be complete next week, and beyond that I wouldn't get any special privileges from the seller. This is why, I am looking for a method that involves flashing using Odin or stock CWM. It's a long shot, but I am hoping someone can help.

Jig is the only way for you to reset the counter on a bricked phone, sorry.

Wasnt there a kernel that Angelom did to reset the flash counter on his superbricks with Team Rocket ICS?
Maybe dig up the old thread in the dev section and check. It was a quick and dirty to reset counter and make it official again.

hkgrob said:
Wasnt there a kernel that Angelom did to reset the flash counter on his superbricks with Team Rocket ICS?
Maybe dig up the old thread in the dev section and check. It was a quick and dirty to reset counter and make it official again.
Click to expand...
Click to collapse
Yes, you are right! I completely forgot about that.
To the OP: I will give you the download link if you can wait till tomorrow.
I am abroad ATM.

incisivekeith said:
I have tried flashing stock ROMs but none of them came with a PIT file or a bootloader. I have tried installing a stock bootloader too, by itself, but nothing allows me to go beyond factoryfs. Are you saying flashing a stock ROM with a matching PIT can make the difference?
Click to expand...
Click to collapse
Yes, it can be done.
Use the pit for your version (16 or 32 gb).

kimitza said:
Yes, it can be done.
Use the pit for your version (16 or 32 gb).
Click to expand...
Click to collapse
Thanks hkgrob, Chasmodo and kimitza. I appreciate it.
So do I need to just flash the 16 GB (I have 16 GB Note) PIT file using Odin and that should reset the flash counter? Just want to make sure I am doing it right.
Edit: I just flashed the 16 GB PIT file using 1.85 PC Odin along with a stock kernel, but the counter has not reset. Also, there is no kernel file, that hkgrob mentioned, in the zipped attachment.
I am not able to find the kernel through search. Could someone upload the kernel which would reset the counter? I will try again after that. Thanks.

incisivekeith said:
Thanks hkgrob, Chasmodo and kimitza. I appreciate it.
So do I need to just flash the 16 GB (I have 16 GB Note) PIT file using Odin and that should reset the flash counter? Just want to make sure I am doing it right.
Click to expand...
Click to collapse
No, flashing pit file will not reset your counter. Angelom 1.2 kernel will, but as I said
I will give you the DL tomorrow (if someone else doesnt post it first).

chasmodo said:
No, flashing pit file will not reset your counter. Angelom 1.2 kernel will, but as I said
I will give you the DL tomorrow (if someone else doesnt post it first).
Click to expand...
Click to collapse
Yes, that's what I figured. I found a link to this kernel in this thread and downloaded it, but it's an ICS kernel, which is also supposed to reset the counter. Is this the one you talk about? And, if it is the right kernel, I guess I should flash it with the PIT file with PC Odin. Correct?
I am on stock GB recovery - for your information.
If anyone else can post the kernel before Chasmodo does, that would be great. Thanks.
A little diversion: For some reason the stock recovery shows there are no files on my SD card, while other recoveries do. Is this supposed to be this way? With stock recovery, I am unable to access anything on my SD card.

I will post this as a separate thread, as it does not fit as an edit in my previous post.
I found this thread, and got encouraged to flash the ICS kernel which the OP in that thread also found. Flashing the ICSTest kernel by Angelom rebooted with a yellow triangle at the Samsung prompt and booted into touch CWM. I rebooted the phone using the reboot option on CWM. With the reboot, the triangle is gone and the binary counter says "No." So, I think mission accomplished for now.
Will there be a way Samsung to tell now if I ever flashed custom recoveries, ROMs and kernels or that phone was rooted before the Google-admitted bug screwed everything up?

incisivekeith said:
I will post this as a separate thread, as it does not fit as an edit in my previous post.
I found this thread, and got encouraged to flash the ICS kernel which the OP in that thread also found. Flashing the ICSTest kernel by Angelom rebooted with a yellow triangle at the Samsung prompt and booted into touch CWM. I rebooted the phone using the reboot option on CWM. With the reboot, the triangle is gone and the binary counter says "No." So, I think mission accomplished for now.
Will there be a way Samsung to tell now if I ever flashed custom recoveries, ROMs and kernels or that phone was rooted before the Google-admitted bug screwed everything up?
Click to expand...
Click to collapse
Just flash a stock kernel now, and they probably won't be able to tell that you ever used any custom stuff.

No need to removed the counter & triangle, just send it back to SSC, they will fix it for you, because they already know the reason you send it back, cheer up!

amytjia said:
No need to removed the counter & triangle, just send it back to SSC, they will fix it for you, because they already know the reason you send it back, cheer up!
Click to expand...
Click to collapse
I am guessing you work for Samsung.
Chasmodo, I have already flashed a stock kernel and am trying to use adb, but I am almost certain I will send it to Samsung. Adb results in "/bin/sh...:No such file...(2)".

chasmodo said:
Just flash a stock kernel now, and they probably won't be able to tell that you ever used any custom stuff.
Click to expand...
Click to collapse
Hi chasmode
I am on ALBA ICS XXLPY V2.2 right now. Can i flash this with pc odin to reset binary to 0.
And yes then this ICS kernal will affect the current rom I am running.

samtani776 said:
Hi chasmode
I am on ALBA ICS XXLPY V2.2 right now. Can i flash this with pc odin to reset binary to 0.
And yes then this ICS kernal will affect the current rom I am running.
Click to expand...
Click to collapse
No. Angelom 1.2 will reset your counter, but it will also give you a hard brick in
no time at all. It is to be used to reset the counter only in cases where a hard brick is already there, sorry.

Thanks a lot. Bookmarked this page in case if I need it in future.

chasmodo said:
No. Angelom 1.2 will reset your counter, but it will also give you a hard brick in
no time at all. It is to be used to reset the counter only in cases where a hard brick is already there, sorry.
Click to expand...
Click to collapse
Is that true that flashing the Angelom 1.2 will hard brick a phone if it's not already bricked? Is that kernel not useful for any ROMs? I am curious because if that's true, I will change the title of my thread.

[Q] Bricked LPY without wiping?

Hey guys,
I hope you can help me. I am aware of the ICS Kernel Bricking bug, and the faulty chip with the faulty firmware, as described on the xda portal, and I read all the stickies. Nevertheless I want to ask you for your opinion on this matter, to prevent turning my note into a brick
So thats what happend last night:
I was on LPY for about 1 month (since released) with root, stock kernel. Before I was on GB DarkyRom 3.3. Everything went normal until I made 2 changes the last hours:
1. I modified the build.prop with this tutorial:
http://forum.xda-developers.com/showthread.php?t=1687156
2. I installed Super Video (like popup player on the galaxy s3) and had several freezes when I started to watch 2 videos. So I took out the battery like 4 times.
Phone booted normally. So I locked the screen, and went to a party.
Then I realized that within 2 Hours the battery got from 50% to 15%. I was too busy to look at betterbatterystats, so I just rebooted the phone with the stock Power Menu.
Now my phone won't boot anymore. It stucks on "Samsung Galaxy Note N-7000" Screen.
As I said, I have not wiped, or do anything with cwm or 3e recovery. However, I can get into DL mode and 3e recovery.
What can I do now? Flash LPF? Reflash LPY?
I read somewhere by someone, that it could be, that even without wiping, the phone can get brick at anytime... Did that happend to me?
I haven't tried to flash anything else, because I wanted to share this with you and get your opinion.
Thanks in advance
k!DDa

So now donot try anything.I suppose you were in darkyrom 3.3 re.If so,you should have known about the counter.So flash it and you will be fine.I again say it will increase counter if you use 3.3 re.
If you don't want the counter,flash a stock gb rom/stock-rooted gb rom.I prefer 3.3 re because it is a wipe rom

Hi vijai2011,
thanks for your answer but I was on darkyrom BEFORE I switched to LPY (that was just a side note^^)
> the last month, including today, I am on LPY, which isn't booting anymore.

k!DDa said:
Hi vijai2011,
thanks for your answer but I was on darkyrom BEFORE I switched to LPY (that was just a side note^^)
> the last month, including today, I am on LPY, which isn't booting anymore.
Click to expand...
Click to collapse
thats not a problem.you can try.

wow you're fast^^
okay but isn't it possible to revive my note? e.g. just flashing a non wipe ICS version via PC ODIN (I do not care about the counter or triangle)
like criskelos ICS No wipe http://forum.xda-developers.com/showthread.php?t=1609252

the inability to boot you describe sounds like something a corrupted build.prop might cause so it's probably nothing to worry about. you'll need to restore your build.prop somehow, probably by flashing something in Odin

ok thanks, I will try. but one good and one bad thing:
I saved the original build.prop before
But on the internal SD card and not my external ^^

If you want to be absolute sure Flash a stock ICS (a full wipe version) rom from pc odin. If all goes well there is no brickissue for you. Then you root using Dr Ketans method.
Sent from my GT-N7000 using xda premium

k!DDa said:
wow you're fast^^
okay but isn't it possible to revive my note? e.g. just flashing a non wipe ICS version via PC ODIN (I do not care about the counter or triangle)
like criskelos ICS No wipe http://forum.xda-developers.com/showthread.php?t=1609252
Click to expand...
Click to collapse
No problem.As I said already its better to go for a wipe rom because of the repartition thing...

one last qustion,
I decided to reflash LPY. But it has only an tar.md5 file. I cannot use MobileOdin. Can I just put it in PDA at PC Odin? (Rename it before to .tar?)
The last 20 firmwares I flashed hadn't that extension.

k!DDa said:
one last qustion,
I decided to reflash LPY. But it has only an tar.md5 file. I cannot use MobileOdin. Can I just put it in PDA at PC Odin? (Rename it before to .tar?)
The last 20 firmwares I flashed hadn't that extension.
Click to expand...
Click to collapse
yes that will work fine, but don't rename it. it works as .tar.md5

yes put the md5 in the pda section and flash with pc odin as normal

Thanks guys my phone is booting again

[Q] newbie - HELP PLS - bricked?

Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty

strangermyself said:
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
First you should t have flash abyss through odin since now you are not rooted and do t have the warranty too, the counter of flashes increased to 1 (look at the download mode small text), for rooting you can use chainfire's tool (in the cf-root kernel thread look for it in devolepment section) next get a stock rooted kernel and flash using the tool (read instructions).
For now use pc odin 1.87 and get a firmware 2.3.6 use the pc odin select the file on PDA and flash it, make sure phone is charged 100% and press start, if it doesn't work then uninstall drivers, reboot machine, reinstall them and kill kies process if present in task manager and then goto download mode connect USB and open pc odin wait for the port to be ready aka green and select file then start.... you should be fine its a soft brick afterall.
Sent from my GT-N7000 using Tapatalk 2

Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.

strangermyself said:
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
Click to expand...
Click to collapse
When connected to charger make sure phone is off the battery meter will show as soon as you connect, case it doesnt leave it for like 3 hours is fine... next about that ROM redownload. The package cleanup you temp directories in PC and try again if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2

REVERSiN said:
... if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?

strangermyself said:
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444

Whiskeyjack4855 said:
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
Dude its a GB rom not superbrick bug in it and he didn't mention LPY yet.
Sent from my GT-N7000 using Tapatalk 2

strangermyself said:
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
Click to expand...
Click to collapse
Sorry for tea doubled post its a dumb app X's
You wipe using the CWM file in the Iss root section, and a normal recovery wipe would do too (aka restore defaults)
Sent from my GT-N7000 using Tapatalk 2

Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help

strangermyself said:
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
Click to expand...
Click to collapse
If you have the stock recovery, restore default wipes everything.
If you have stock re every and want CWM temporary just to wipe goto n7000 devolepment and check how to root by dr.ketan and get files there
If you have CWM then wipe data, wipe cache, wipe dalvik.... and try. Old download another firmware like kk5.... something else not the new LC1 LX1 releases.... (Latest GB) get an old one to get root easly
Sent from my GT-N7000 using Tapatalk 2