Related
http://www.neopeek.com/en/forum/14-Android-ROMs/364-Xperia-X1FroyoRedux-PortCM6
check this neopeek testers need again....
Installing as I type! Can't wait the original kernel to get the battery related patches!
I am having a wired problem - after a while on standby, upon waking up the phone, it freezes. Clock doesn't advance and phone does not respond on buttons/slider. So I do a soft-reset after which in winmo I get a message sdcard is not formatted, do I want to format it. and indeed file system is damaged. And this happens for a second time in a row now! I havent had problems like that with other distributions, at least ones that require ext2 partition. Anyone have advice?
Sent from my Milestone using XDA App
well, i cant charge
So far, it's perfect. Two issues that need to be resolved before I use it permanently is the charging and the battery drain.
Getting really close!
So far, it's perfect. Two issues that need to be resolved before I use it permanently is the charging and the battery drain.
Getting really close!
Click to expand...
Click to collapse
Ok so far so good! BUT: Would you provide us a lil bit of more info!
Which kernel did you use? Included one (=21/8) or that from SuperFroyo??
vatoloco said:
Ok so far so good! BUT: Would you provide us a lil bit of more info!
Which kernel did you use? Included one (=21/8) or that from SuperFroyo??
Click to expand...
Click to collapse
Sorry, was in a bit of a rush
Working: Marketplace, WiFi, GPS, battery meter, sound, messaging, gmail app, browser, ( bluetooth, I think )
Not: Camera, charging, power management
Used: Only the included files, nothing more.
May anyone please test this kernel?
Test-Kernel
I am awaiting your feedback
Hey guys, my Galaxy S should arrive tomorrow.
@all Developers:
Thank you very much for the good work, keep it up
@the rest:
I wish you good luck, that you can enjoy android on your X1 as i will do it on my new phone.
Maybe i'll look back in here from time to time, to see the progress.
Best regards from germany
See ya!
report?
Total performance is smooth
My location , Wi-Fi, Market , Battery Meter , GMail, Sound, Music is working
other function. i didn't use it.
Overall performance is good, but Force Close dialog is too much show..... when i try to do anything. there's a delay (about 5~10sec?)
All of you guys should really post which kernel you are using. It will be very helpful for the developers!
I am downloading at the moment, will try the kernels and post the results
Original kernel + points about FroyoRedux:
- Charging works (I had it plugged when I launched Android, actually does increase WM battery percentage, too)
- Battery meter shows too much, but I think it will calibrate itself if I finish charging
- Speaker bug is there, headphone plug and unplug fixes that
- A bit faster than CyanogenMod6 with Tremere's kernel
- Nice theme
- Mass storage does not work (should I install a driver or something?)
- Sometimes stops responding to any other key than the top power button = home
- 3D does not work
- Sound and calling work fine, cannot adjust in-call volume (possibly due to the keys not working, but I had this problem with CM6+Trem too)
- Pretty much every app works, YOUTUBE TOO (lags a bit, but works)!
New testkernel:
- Phone reboots when first screen of android comes up
- I just replaced files, it crashed at lockscreen
- Ran a new installation, it crashed at black android system (title) -window
SuperFroyo kernel:
- Fastest one, menu scrolling is pretty nice with this kernel
- 3D does not work, Neocore crashes
- Sound works
- Youtube works, and lags less than with original kernel
- Charging does not work, battery meter shows what comes to it's mind
vatoloco said:
May anyone please test this kernel?
Test-Kernel
I am awaiting your feedback
Click to expand...
Click to collapse
Tried copy/paste of those two files straight into root of SD-card (can only guess as it's not written anywhere). Phone reboots as soon as it comes to PIN-code page. Tried to restart a couple of times but nope.
Tried the SuperFroyo-kernel as well. Much faster in comparison to kernel from tremere's build 21/8.
Else, nothing more to add other then lkoljo wrote.
Big thx!
tried this kernel
xperia-xdandroid-kernel-20100922
Sound didn't work??
I'm useing the test kernel now, and it booted up without any problems
Gonna test Battery life for 2 hours, then switch back to vm to see if it gives good result's
Did you use the test-kernel from scratch. I mean when first booting up? or did you try first included kernel then after booting up you replaced kernel? I ask this because it's just not clear for me: You say it works w/o hassle and others report that they can't even get into the Launcher or that they have a black screen. I am just confused now
I did first use Tremere's Kernel with your build, and then i just copied the test kernel start from vm and booted it up. It's fast and stable it seems, i did use Android in standby mode for one and half hour. Well i did look around in system meny and such tried calling it but no signal just vibrate wich i did turn on. Battery used in android is 20% from fully charged 100% Switch back to vm says 78% so the meter seems almost correct. Tried original charger but it didn't work, Then tried pc usb charging and it seems to work Gonna try Xdandroid's new kernel now released today. Will get back to you tomorrow
I have now tested the new Xdandroid kernel released 23/9/10 for one and half hour now, switched back to vm and guess what?
i had 100% when i started android, used it for one and a half hour and then i switched back to vm it had only used 9% battery
Thats the best result i ever had using android, so hey if only sound/ mic problem gets fixed then this would be great
Grab the new kernel from thier Xdandroid wiki
I have tested 21/09/2010 [Xperia X1][FroyoRedux-Port][CM6] with the latest kernel from xdandroid (23/9/10) and it works very well, stable and fast. And the battery is a big improvment!!
I also overclocked it to 640mhz and the UI is then superfast.
Keep up the good work
winkgw said:
I have tested 21/09/2010 [Xperia X1][FroyoRedux-Port][CM6] with the latest kernel from xdandroid (23/9/10) and it works very well, stable and fast. And the battery is a big improvment!!
I also overclocked it to 640mhz and the UI is then superfast.
Keep up the good work
Click to expand...
Click to collapse
you use zimage to?
FYI: In the next days there will be heavy updates regarding some of my builds. Fixed almost everything I could! Just trying out today some of the kernels released lately and then I think we will have a really really good CM6-Ports ready for all of you! Everything that's working in XDAndroid "Final" should then also work for us! So maybe I will call my builds "Pre-Final". Another thing that I should mention is that user ferlanero from xda-devs has today shipped over his X1 from Spain to Germany (my location). Once I receive it I will be going to try some NAND-related stuff!
X1 from user sequester will be my porting-device to test ports and latest nightlies from Cyanogen
X1 from user ferlanero will be my nand-test-device
Be prepared to get the proposed updates (see above) on this weekend. Again speical thanx to sequester and ferlanero for supporting me! This really motivates me in doing all this stuff!
Yes zimage to at lest i did
Hi,
straight to the point...i want froyo for my galaxy s and a very good and stable lagfix with it but I don't know what ROM and lag fix to choose from and am very "noobiesh" at these kind of things.
Plus:i got voodoo lag fix and its great and I like the color and sharpness tweaks that comes with it so can I use voodoo lagfix with froyo??
So please can anyone tell me what to do exactly without any complicated mumbo jumbo??? DX
Get JPO (the latest froyo) from samfirmware.com, and flash it using ODIN. (use vol down+home+power button when turning on your phone to get it into download mode).
In my opinion, no lag patch is really needed. Lag patches can cause long term maintenance issues anyway still (and you need to take more precautions, such as DEFINITELY keeping a copy of /efs if you use a lag patch). If you are consistently getting excessive lag in late roms, it might be because certain programs you have installed are causing problems (also consider trying launcherpro, or a stock launcher).
If you want a bit more speed, wait for Tayatuma to update his superlite rom, to use JPO rather than JPM, or wait for another AOSP ROM such as Cyanogenmod (AOSP is closer to the experience google wants us to have, rather than Samsung).
Ensure you use a i9000 rom too, and don't accidentally use a i9008 or other model one. Good luck, and remember, this is just my opinion. Also, don't get too caught up in Quadrant. It isn't accurate, and some people here SERIOUSLY (I kid you not), are selecting roms based on a difference of quadrant speed of only a few points (less than 5%).
Hey everyone
Just a simple question; Is the following setup safe for my galaxy s i9000? What I mean is, will the phone face bootloops and other problems soon?? I am currently using it and the performance is....well lets just say unrealistic. Phone boots up and is ready go in less than 15 seconds. The reason why I am paranoid is because im coming from the stock 2.2 Froyo and the performance gain really is unbelievable.
Setup is:
- Stock XXJVT odex
- Dark Core kernel 4.1 for JVT (It has some lagfix activated or something)
- Adernaline Shot v13
- Current governor (through setCPU): Ondemand -> As recommended by Adernaline Shot thread.
I wouldn't worry to much. The performance gain from Froyo Stock to JVT is really impressive!
I had a pretty similar setup for some time at it was running very well. Some random reboots may occur as with all firmwares (Stock and cutom) I have tried before.
Also, I overclocked it to 1,3Ghz with no loss of stability.
Have fun.
Nice and clean setup. You should not face any problem.
Hello!
Just reporting back on this setup....
The performance really is amazing. Phone runs very fast, apps load and close instantly, no heating issues, browsing is incredible, and not to mention this voodoo sound thing that turned the speakers into boom boxes, and massively improved in-call sound and volume. I haven't had any random bootups yet.
However, the only grudge I have is, and hopefully u guys can help me out, that the GPS signal quality is very lame with Google Maps. Also, Google Maps is VERY laggy, sometimes impossible to use because I can't even scroll around or zoom-in/out because it goes down to like 3 fps. It is just shocking that heavy 3D games can be played for an hour without any stuttering or slowing down, yet Google's own application Google Maps barely runs.
I would really appreciate it if you guys can help me out
GPS problems?. Welcome to SGS world.
cabessius said:
GPS problems?. Welcome to SGS world.
Click to expand...
Click to collapse
Lol ya after doing some searching I found that this is a pretty common problem. However, its not the GPS locking that is bothering me; The Google Maps app itself is VERY laggy, im currently on version 6.0.0 and it is unusable for me. Scrolling around and zooming in/out is like 2 frames per second. Do you know why that would be?
Hi everyone
Recently, i've updated my i9000 from cm9 to cm10. But i found it a little bit laggy, there is too much data run in the background and my phone can't just handel it. Some app don't work anymore (i have some message after an unsuccefull update saying "out of memory").
Do i have to wait for further updates or should i go back to the latest CM9 ?
PS: Is there any tips to prevent the shuting down signal problem with the i9000 ?
Hey,
I've had the same feeling about CM10 being laggy on my I9000. Hopefully it's just another bug.
And it is a well known issue that some apps aren't still running yet.
I went back to CM9.1 which runs really smooth. I'm gonna wait for a CM10 stable version and check if it's still laggy.
Sent from my GT-I9000 using xda app-developers app
Yust move apps to SD, CM10 has a new partition layout.. That solve the problem of low space
Try elitemovil rc12.1 which is faster and smooter than stock sgs3
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
You should try the new nightlies, hardly any lag at all.
All jellybean roms get laggy no matter what you do, I tried most of the JB roms and I used HellyBean for a while with super launcher (a custom supercharge for galaxy s) and it kept working fine because somehow by flashing a new rom version often the phone would stay fine (wasn't just wipe cache and dalvik)
But I'm now back to ICS because even if most of the time the phone is doing fine, when you need it the most it starts failing even overclocked at 1.4 and with performance mode and swap, so I will wait 11 days and buy the nexus 4 !
Jelly bean runs fine on my phone to be honest. No lag or nothing. Only ROM that's ever lagged is hellybean.
Sent from my GT-I9000 using xda premium
On X-Bean 3.0 + Semaphore 2.5.0s here. LiveOc 120, ondemand ui, noop/sio, big mem 404mb, rasd 1024. Running smooth & stable here. No lag, reboots etc whatsoever
NIMBAH said:
Jelly bean runs fine on my phone to be honest. No lag or nothing. Only ROM that's ever lagged is hellybean.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
So u r all alone with that!
For me its totally different!
getapatalked
[email protected]@tz said:
So u r all alone with that!
For me its totally different!
getapatalked
Click to expand...
Click to collapse
Try elite v4 before speak
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
[email protected]@tz said:
So u r all alone with that!
For me its totally different!
getapatalked
Click to expand...
Click to collapse
My experience is the exact same as the one you quoted.
I believe the clue to having a stable jb is to avoid most of the non-vanilla settings. I.e people come in various jb threads claiming bugs and unstability, while having oced, deep idle, custom kernels with experimental settings, not having wiped, flashed the wrong package - lots of issues that are experimental and not stock and stable.
The question of what is stable is relative, but I'm convinced that the ability to read, knowledge, proper flashing and simple logic would help avoid 9 out of 10 "unstable" jellybean experiences.
I am aware this might come over as a bit condescending, and I guess that's partially true, but it's not directed at any particular person here.
Sent from horseback.
people, CM10 is the best. I've never had such a great rom, I mean, the SGS I is old, but with CM10, oh boy... I've never had such a good battery life, such a smooth rom, and non laggy ( helly bean was a disaster, it lagged a lot and very few updates).
Well, here is my settings:
-> CM10 latest nightly
-> JB hugemem patch (391mb ram and 720p recording still working)
-> Rom Slimmer
-> Semaphore kernel 2.5.0s:
.......- oc 1140 MHz
.......- SIO
.......- Smartassv2
.......- 512kb read ahead
-> SUPERLAUNCHER + SQLITE
Difusal said:
people, CM10 is the best. I've never had such a great rom, I mean, the SGS I is old, but with CM10, oh boy... I've never had such a good battery life, such a smooth rom, and non laggy ( helly bean was a disaster, it lagged a lot and very few updates).
Well, here is my settings:
-> CM10 latest nightly
-> JB hugemem patch (391mb ram and 720p recording still working)
-> Rom Slimmer
-> Semaphore kernel 2.5.0s:
.......- oc 1140 MHz
.......- SIO
.......- Smartassv2
.......- 512kb read ahead
-> SUPERLAUNCHER + SQLITE
Click to expand...
Click to collapse
i cant believe that so many ppl are busting HB.
laggy disaster?
first of all, HB is a CM10 too.
and beside this HB isnt laggy!
sometimes it depends on the phone, cos a SGS1 is not a SGS1. so many differences available...
best is, just try some JB ROMs and decide for urself!
I never had problems with CM10 . Run smooth .
I think is the best ROM i had experienced on my SGSI .
I installed slimbean (cm10 based) recently on my i9000m and its a tad laggy when I am pushing it but overall its better than the last stock GB rom that I had been on for a long time (got tired flashing this and that). And its stable too. Overall the switch has been nice, for the main reason that I have less of a desire for the SGS 3 (hey there's always the 4 one day right?)
My experience with cm10.1 has been roller coaster. To day it is fast and smooth but yesterday it is leggy and gets stuck. I frequently get popups of applications not responding etc. The i click wait and it gets done.
Before you throw me with rotten tomatoes let me give you the steps that i followed.
Got a brand new i9000 from from a warranty claim a month ago.
Flashed cm10.1 nightly using Cwm after having to work around a few bugs with the new heimdall program not being compatible. But with CWM on I no longer needed the pc.
Download a nightly (26 Feb)
So did a factory reset and wiped everything. Flashed cm10.1 nightly again just to make sure. Then loaded a modem that seems to work for my area. The modem is a XXJVR and is a ICS modem. then flashed Google app for jb 4. 2.2.
Rebooted and logged in. Restored all my sms using sms+ backup and restore
Installed all my preferred application from play Store.
It started nice but soon became slow and large.
So I updated to 10.1m2. Same problem.
At this moment it is workable. It takes about 6 counts to respond to changing from portrait to landscape. If i turn it one the home screen takes about 2 counts to get updated and responsive.
Holding the home button gives you the recent application list. It takes about 2 counts to respond with a vibration and then 2 to 3 more counts before the menu pops up and the list of recent applications have been populate. I don't know if this is normal but 5 counts feels forever when you decide to do something and need to wait for the system to be ready.
I am not over clocking and I am running no custom kernels.
The notification bar at first comes down in jumps. If i do it again it is smooth.
But the biggest frustration is typing. The lag between presses and haptic feedback seems to be random. It is always under a half a second but when you want to type you never know if it got the press or not. Just as you think you need go repress the letter updates.
Battery life is also erratic. Yesterday the phone was uncomfortable hot in my pocket all day. Battery did not make 14h. Today it is cool and it is at 73 % for 9h.
The main battery life is taken by android OS and screen. Not calls or any of the chat apps that I use. Yesterday Android OS took half my battery life.
Going to apps the zoom is jumpy and sliding jumps. If i do it again it is smooth.
And today is a good day.
Any suggestions what I can do to improve the performance? Except getting a new phone.
H
I don't think I can quite relate to that, my phone runs CM10.1 quite well...
Had to be said though that I can feel my phone struggles running it, pushing the limits pretty hard.
My phone has the slow RAM, unfortunately, I'm sure a lot of the people posting stories of glory are ones with the faster version.
That said, I could never in a million years go back to an earlier version, I know my phones limits and work around them without too much trouble, mainly browsing (using Chrome) is the one thing my phone struggles with.
But regarding your erratic phone behavior, have you installed a startup manager and better battery stats?
Android battery stats doesn't always do a very good job of reporting exactly what apps or background processes are draining over time...
Sent from my GT-I9000 using xda premium
jjziets said:
My experience with cm10.1 has been roller coaster. To day it is fast and smooth but yesterday it is leggy and gets stuck. I frequently get popups of applications not responding etc. The i click wait and it gets done. .....
Click to expand...
Click to collapse
It been quite some time now, but have you been able to fix your erratic behaviour? Cause I'm experiencing something similar.
I tried Slim JB & Fishears Rom so far. Right after flashing, without any apps, the roms seem to be running smooth but Slim JB soon became laggy so I tried out Fishears Rom which seemed to behave smoothly even after installing some apps.
But after several month of usage the system slowed down almost as much as it was with Slim JB.
As both of them are based on CM I guess it's a general problem that the SGS 1 just can't handle the new Rom + big amout of apps. Sometimes it runs relatively smooth if I cleared RAM etc and didn't start any apps, but as soon as I for example listen to music in the background everything just becomes laggy :-/
I guess after 3 years my SGS1 is just too old now^^
p-walker said:
It been quite some time now, but have you been able to fix your erratic behaviour? Cause I'm experiencing something similar.
I tried Slim JB & Fishears Rom so far. Right after flashing, without any apps, the roms seem to be running smooth but Slim JB soon became laggy so I tried out Fishears Rom which seemed to behave smoothly even after installing some apps.
But after several month of usage the system slowed down almost as much as it was with Slim JB.
As both of them are based on CM I guess it's a general problem that the SGS 1 just can't handle the new Rom + big amout of apps. Sometimes it runs relatively smooth if I cleared RAM etc and didn't start any apps, but as soon as I for example listen to music in the background everything just becomes laggy :-/
I guess after 3 years my SGS1 is just too old now^^
Click to expand...
Click to collapse
Hi. No I gave up. My first SGS1 was amazing and did not behave like this. I think it had faster ram. Due to some issue it was replaced under warranty. The replacement looks the same but it is very frustrating. I am running stock rom now 2.3.4 with almost nothing installed. But it find that it is a pain. Calling takes long to actuality start to dial. The screens are smooth but when you do things. Like flip between apps or go to dialler it is almost unusable.
I think Samsung release more expensive variations in the beginning and then keep the look the same but drop the cost of the handset to the end.
Hi.
I'm a noob in this custom business and i have a i9000 and i just flashed CM10.1.2 and everything is ok but i want to use igo and after install i get an error about the sd card. How can i use igo?
Hey fellas, new to modding. Have a samsung captivate. Cutting right to the chase.
So i got this phone about 1 week ago. Used the stock ROM (2.3.5) for about 2 days. Then flashed CM 10. Then flashed CM 10.1. Now today flashed "Captivating (Xperia)" ROM. I've been facing one single problem in all the ROMS (That i didn't notice in the stock ROM), the colors are not proper in the custom ROMS. Like, pixelation (on a big level) at the regions where screen's black region meets any coloured region. (I know, difficult to understand & difficult to explain as well, so i've attached 2 images to show it).
I first noticed it on the CM 10 boot animation. It was highly pixelated at edges (both inside & outside the ring). Ugly to look.
& i know that it's not the resolution problem. (My friend is using the SGS 2, flashed CM 10.1 last night, has crisp clear graphics, same res & larger screen than captivate)
It's present EVERYWHERE. In bootanimation, wallpapers, videos, apps, etc. wherever black meets any color.
What is it.? How to fix it.? Is it any soft problem or a hardware problem.?
P.S. Going to setting -> advanced -> Color Tuning -> & setting-
Red - 1.000 (Default value)
Green - 1.000 (Default value)
Blue - 1.000 (Default value)
Red Gamma - -40
Green Gamma - -40
Blue Gamma - -40
does solve it a little, still the problem is there.
Moreover, it doesn't solve the prob of the bootanimation.
What to do.?
I have followed the same path from GB to CM10 to 10.1.
Never had any color shifting or LCD problems in months of use with CM. At one point I get a yellowish tint on a Semaphore kernel. I restored an earlier CM10.0 and the problem never repeated itself.
Do you have the problem on straight, stable CM10.0?
When you got the phone on GB, did it have the Corn kernel? What were the settings in Voodoo color? That might help you understand how to tweak JB settings.
ishandigipunk said:
Hey fellas, new to modding. Have a samsung captivate. Cutting right to the chase.
So i got this phone about 1 week ago. Used the stock ROM (2.3.5) for about 2 days. Then flashed CM 10. Then flashed CM 10.1. Now today flashed "Captivating (Xperia)" ROM. I've been facing one single problem in all the ROMS (That i didn't notice in the stock ROM), the colors are not proper in the custom ROMS. Like, pixelation (on a big level) at the regions where screen's black region meets any coloured region. (I know, difficult to understand & difficult to explain as well, so i've attached 2 images to show it).
I first noticed it on the CM 10 boot animation. It was highly pixelated at edges (both inside & outside the ring). Ugly to look.
& i know that it's not the resolution problem. (My friend is using the SGS 2, flashed CM 10.1 last night, has crisp clear graphics, same res & larger screen than captivate)
It's present EVERYWHERE. In bootanimation, wallpapers, videos, apps, etc. wherever black meets any color.
What is it.? How to fix it.? Is it any soft problem or a hardware problem.?
P.S. Going to setting -> advanced -> Color Tuning -> & setting-
Red - 1.000 (Default value)
Green - 1.000 (Default value)
Blue - 1.000 (Default value)
Red Gamma - -40
Green Gamma - -40
Blue Gamma - -40
does solve it a little, still the problem is there.
Moreover, it doesn't solve the prob of the bootanimation.
What to do.?
Click to expand...
Click to collapse
As for I can see with the pics, your gamma is off the hook. That's not by default though, there's something that was changed. Did you play with Voodoo or color settings before and after flashing?
Did you try going back to stock and reflashing? (clean flash)
Did you try using different color temperature? (cold, warm, normal)
I see you reduced your gamma by quite a lot but there should be a better solution. Unless you have some overpowered digitalizer lol. Which brings me to think, was the screen replaced?
First off, the phone came with the official samsung 2.3.5 gingerbread ROM. At that time, i didn't notice any such issues (so i guess i can conclude that they were absent at that time).
Then i put in the speedmod kernel. Flashed cm10 (stable). Had this colour problem. I've now had this color problem ever since i flashed cm10.
On an unrelated note, m getting very poor battery life. I charge the phone till 100% (I've been leaving it at charging overnight since the last 2 charges, still the problem persists), & i remove the charger at about 7 in the morning. No music. A little (& very light) gaming (temple run, subway surfers, etc) for about 30 minutes total throughout the day. Screen brightness at lowest at max times during the day. very little calling. very little messaging. Oh, & NO cellular data connection (No GPRS, EDGE, 3G or anything for internet). Only wifi. That too for around 1 hour total. & still my battery goes flat to zero in about 12 hours (or even less). Is this normal.? I don't really remember how my battery was at the stock ROM, but it's like this on CM 10. Is this normal at all.? Is there any way to check battery.? Is it just a bad battery.? Or is this just the normal battery life of this phone.? (Cuz i read samsung galaxy S review on gsmarena, which is basically the same phone, & it manages to squeeze out around 3.5 days of battery life under their tests, which include pretty heavy usage with 3g enabled all the time)
& no, i got a new phone. So i really don't think the screen was replaced. Is it possible i was cheated through the dealer somehow.? I got it over at ebay.in.
M gonna flash stock ROM in a few hours. M currently downloading this one. Is this the correct one.?
http://forum.xda-developers.com/showthread.php?t=731989
M confused, in settings now (in cm10), it shows Baseband version - I9000UGKG3. That ain't correct. Right.? How to know which stock rom i have to flash now.? I forgot to check my stock rom's baseband. I have to use the phone in India over the Indian baseband.
EDIT: Oh & i didn't change any settings (or any voodoo settings) for any kernel or anywhere at all. i noticed that colour problem in CM 10 boot animation. Many times. Then played around with display settings in cm10.
ishandigipunk said:
First off, the phone came with the official samsung 2.3.5 gingerbread ROM. At that time, i didn't notice any such issues (so i guess i can conclude that they were absent at that time).
Then i put in the speedmod kernel. Flashed cm10 (stable). Had this colour problem. I've now had this color problem ever since i flashed cm10.
On an unrelated note, m getting very poor battery life. I charge the phone till 100% (I've been leaving it at charging overnight since the last 2 charges, still the problem persists), & i remove the charger at about 7 in the morning. No music. A little (& very light) gaming (temple run, subway surfers, etc) for about 30 minutes total throughout the day. Screen brightness at lowest at max times during the day. very little calling. very little messaging. Oh, & NO cellular data connection (No GPRS, EDGE, 3G or anything for internet). Only wifi. That too for around 1 hour total. & still my battery goes flat to zero in about 12 hours (or even less). Is this normal.? I don't really remember how my battery was at the stock ROM, but it's like this on CM 10. Is this normal at all.? Is there any way to check battery.? Is it just a bad battery.? Or is this just the normal battery life of this phone.? (Cuz i read samsung galaxy S review on gsmarena, which is basically the same phone, & it manages to squeeze out around 3.5 days of battery life under their tests, which include pretty heavy usage with 3g enabled all the time)
& no, i got a new phone. So i really don't think the screen was replaced. Is it possible i was cheated through the dealer somehow.? I got it over at ebay.in.
M gonna flash stock ROM in a few hours. M currently downloading this one. Is this the correct one.?
http://forum.xda-developers.com/showthread.php?t=731989
M confused, in settings now (in cm10), it shows Baseband version - I9000UGKG3. That ain't correct. Right.? How to know which stock rom i have to flash now.? I forgot to check my stock rom's baseband. I have to use the phone in India over the Indian baseband.
EDIT: Oh & i didn't change any settings (or any voodoo settings) for any kernel or anywhere at all. i noticed that colour problem in CM 10 boot animation. Many times. Then played around with display settings in cm10.
Click to expand...
Click to collapse
Oh god I hope I'm not too late. The Odin you've downloaded is a old version and contains froyo bootloaders.
You'll want Odin KK4 without Bootloaders to get back to stock.
If you already flashed the other one, you're most likely back on froyo or Eclair. You'll need Odin KK4 with Bootloaders to get back to stock GB.
As for the dealer, yes, it's possible that the phone isn't actually new or that the screen was replaced.
BWolf56 said:
Oh god I hope I'm not too late. The Odin you've downloaded is a old version and contains froyo bootloaders.
You'll want Odin KK4 without Bootloaders to get back to stock.
If you already flashed the other one, you're most likely back on froyo or Eclair. You'll need Odin KK4 with Bootloaders to get back to stock GB.
As for the dealer, yes, it's possible that the phone isn't actually new or that the screen was replaced.
Click to expand...
Click to collapse
Phew. Thank god i've crossed my FUP limit & have an epic slow internet connection right now.
the file was still downloading. Otherwise i would've flashed with that. Thanks for the warning man.
Anyway, do u think stock ROM will solve the battery problem.?
Saw this page too..
http://forum.xda-developers.com/showthread.php?t=1300843
Do i need to flash "I897UCKK1" "Without Bootloaders" .??
EDIT: Oops. Sorry. Just read your complete message. Downloading that file now. Thanks.
ishandigipunk said:
Phew. Thank god i've crossed my FUP limit & have an epic slow internet connection right now.
the file was still downloading. Otherwise i would've flashed with that. Thanks for the warning man.
Anyway, do u think stock ROM will solve the battery problem.?
Saw this page too..
http://forum.xda-developers.com/showthread.php?t=1300843
Do i need to flash "I897UCKK1" "Without Bootloaders" .??
EDIT: Oops. Sorry. Just read your complete message. Downloading that file now. Thanks.
Click to expand...
Click to collapse
Battery problems are user specific, not ROM specific. I'd highly suggest you get BetterBatteryStats to see what's draining your battery. Also, after flashing, it does take a couple full battery cycle to get the best outta your battery.
BWolf56 said:
Battery problems are user specific, not ROM specific. I'd highly suggest you get BetterBatteryStats to see what's draining your battery. Also, after flashing, it does take a couple full battery cycle to get the best outta your battery.
Click to expand...
Click to collapse
Hmm. Alright. But.. Really.. I've read some reviews.. (& also, i've written my usage above, is that even real.? Cuz a few weeks ago i was on motorola Defy+ & i could easily get 2 days of battery life at heavier usage than my current usage) & according to reviews, m supposed to get even more battery life on captivate.! That's why i was asking. Cuz gsmarena claims it gets 3.5 days of battery life under normal average load (Which m not even putting on it most of the time.!) & with 3g ENABLED.! (which m not enabling at all, infact no data connection via sim, only wifi, that too very less). Still just 12 hours of battery life.
Anyway, flashing stock ROM soon. Will use that for a week i think. To test out my phone. Then will see what to do.
EDIT: Another (& probably the most important) question.! Will the device still stay unlocked after flashing it back to stock ROM (i bought it factory unlocked)
the i9000 baseband is correct for cm10 captivatemtd build. captivate is a variant of galaxy s series, as is i9000.
that isn't to say that you should go flashing an i9000 rom.
captivate lacks several pieces of hardware that are in other galaxy s phones.
ishandigipunk said:
Hmm. Alright. But.. Really.. I've read some reviews.. (& also, i've written my usage above, is that even real.? Cuz a few weeks ago i was on motorola Defy+ & i could easily get 2 days of battery life at heavier usage than my current usage) & according to reviews, m supposed to get even more battery life on captivate.! That's why i was asking. Cuz gsmarena claims it gets 3.5 days of battery life under normal average load (Which m not even putting on it most of the time.!) & with 3g ENABLED.! (which m not enabling at all, infact no data connection via sim, only wifi, that too very less). Still just 12 hours of battery life.
Anyway, flashing stock ROM soon. Will use that for a week i think. To test out my phone. Then will see what to do.
EDIT: Another (& probably the most important) question.! Will the device still stay unlocked after flashing it back to stock ROM (i bought it factory unlocked)
Click to expand...
Click to collapse
Unlock is permanent so you don't have to worry about that.
Getting 3.5 days with data enabled is nearly impossible with how old the phone and battery is. That would mean no sync, extremely low brightness, no widgets, no GPS/location access, perfect signal (4 bars) at all time and absolutely no gaming.
I would personally get about 2.5-3hrs on screen with my cappy, that was with data, sync, auto brightness enabled and medium usage. Back when I didn't have data though (Froyo days, with Firefly ROM), I would get at least 2 days with medium usage.
You gotta keep in mind that if that gsmarena is on a old firmware, he has about a 1/4 of the features CM has right now and well, more features = more battery drain. Also, battery highly depends on your apps/widgets, the more apps that sync, the more drain you get.
One last thing, CM isn't the only 4.2 ROM out there, feel free to try a few of them.
BWolf56 said:
Unlock is permanent so you don't have to worry about that.
Getting 3.5 days with data enabled is nearly impossible with how old the phone and battery is. That would mean no sync, extremely low brightness, no widgets, no GPS/location access, perfect signal (4 bars) at all time and absolutely no gaming.
I would personally get about 2.5-3hrs on screen with my cappy, that was with data, sync, auto brightness enabled and medium usage. Back when I didn't have data though (Froyo days, with Firefly ROM), I would get at least 2 days with medium usage.
You gotta keep in mind that if that gsmarena is on a old firmware, he has about a 1/4 of the features CM has right now and well, more features = more battery drain. Also, battery highly depends on your apps/widgets, the more apps that sync, the more drain you get.
One last thing, CM isn't the only 4.2 ROM out there, feel free to try a few of them.
Click to expand...
Click to collapse
Alright. Right now m back to stock (2.3.5). Will keep this ROM for a few days. Check out the battery life. The max battery life i can get out of it.
& i don't know if the colour problem is still here in this ROM, but.. i really can't see it anymore. So gonna play around with this ROM. Thank you for your help people.
Oh.! Now i understand it.! M getting what is commonly called "Black Crush".!
Here's a video demonstrating it (In galaxy note & comparing it with a normal captivate)
http://www.youtube.com/watch?v=0a8aIGeLERg
That's why my screen colors were problematic.! & maybe still are problematic. Although i don't think m getting the black crush at THAT level. Any way to solve this issue.? :\
ishandigipunk said:
Oh.! Now i understand it.! M getting what is commonly called "Black Crush".!
Here's a video demonstrating it (In galaxy note & comparing it with a normal captivate)
http://www.youtube.com/watch?v=0a8aIGeLERg
That's why my screen colors were problematic.! & maybe still are problematic. Although i don't think m getting the black crush at THAT level. Any way to solve this issue.? :\
Click to expand...
Click to collapse
First time I hear about this so I dunno if there's a fix or not (other than getting another digitalizer).
BWolf56 said:
First time I hear about this so I dunno if there's a fix or not (other than getting another digitalizer).
Click to expand...
Click to collapse
M not gonna get a new digitalizer for it. Definitely not. I bought this phone just for general usage plus listening music. The colour problem has almost vanished ever since i flashed the stock ROM. The battery has also considerably increased.
I will live with the colour problem if i have to. It won't be worth buying a new digitalizer & replacing the old one.
ishandigipunk said:
M not gonna get a new digitalizer for it. Definitely not. I bought this phone just for general usage plus listening music. The colour problem has almost vanished ever since i flashed the stock ROM. The battery has also considerably increased.
I will live with the colour problem if i have to. It won't be worth buying a new digitalizer & replacing the old one.
Click to expand...
Click to collapse
After your testing, feel free to try another custom ROM, maybe other than CM this time and see if you get better results.
BWolf56 said:
After your testing, feel free to try another custom ROM, maybe other than CM this time and see if you get better results.
Click to expand...
Click to collapse
Okay. will do.
just confirmed another thing. I just flashed cm10.1 (directly from stock)
Now, I can see the color prob. only in the videos though. not images. anyway, it's confirmed new w.. the problem is not there on the stock ROM, but present in the cm 10, 10.1, n the xperia ROM.
n I've also noticed changing gamma values (all to -40) will reduce the prob by a large margin. dunno what the issue is here.
anyway, flashing semaphore kernel with voodoo colour settings now. will post the result in a few hours (or maybe tomorrow morning). all of your help is really appreciated.
EDIT: Flashing with the semaphore kernel with voodoo settings made it much worse. It made that colour problem MUCH MORE noticable. I mean i could literally see thousands of flawed pixels in every frame.!
Will stick with CM 10 stock kernel.