Related
Not sure if this has already been posted somewhere, but after my experience I figured it might be useful to someone. If it's been posted already ignore this and move on with your day/night
1. flash sbf
2. phone will go in the boot loop of death, thats fine lol.. when rsdlite says 100 percent pull the battery
3. put the battery back in, hold down the home button plus the power button till you see the moto logo followed by the triangle
4. hit search button, your now in recovery
5. do a factory restore
6. once complete reboot phone
7. thank god and swear you wont flash your phone ever again (ofcourse only to do it in a day or so after you have calmed down)
rsdlite and sbf can be found in this thread CLICK
If you made a nandroid backup of 2.1 couldn't you just restore that? I'm pretty sure you can. I remember doing it with the Moto Droid.
taypotts said:
If you made a nandroid backup of 2.1 couldn't you just restore that? I'm pretty sure you can. I remember doing it with the Moto Droid.
Click to expand...
Click to collapse
not sure if you can use bootstrap in froyo, and besides if you ever need to go back to a unrooted state this is the way to go :: cough warranty ::
taypotts said:
If you made a nandroid backup of 2.1 couldn't you just restore that? I'm pretty sure you can. I remember doing it with the Moto Droid.
Click to expand...
Click to collapse
Do not restore a 2. 1 nandroid in 2. 2. The update changes the bootloader and recovery versions which aren't part of the backup. The phone will just hang at the MOTO logo. I learned this the hard way. You have to use the sbf. You can then apply your nandroid to get everything back.
Sent from my DROIDX using XDA App
iB4STiD said:
Not sure if this has already been posted somewhere, but after my experience I figured it might be useful to someone.
Click to expand...
Click to collapse
Could you explain?
I am holding off on switching to 2.2, always do to let everyone else find the bugs.
What was your experience?
bad4u6669 said:
Could you explain?
I am holding off on switching to 2.2, always do to let everyone else find the bugs.
What was your experience?
Click to expand...
Click to collapse
what i meant by my experience was downgrading 2.2 to 2.1, My g/f has the droid x, and i am the one to root or mod her phone for her. She wanted to try out froyo and liked the rom alot. there are little bugs i noticed
1. odd little animation hiccup when scrolling home screens
2. lag in gallery
3. what seemed like market delay (but the market has been slow lately, same thing on my vibrant and g1)
but this is a test build not a "final rom"
Like i said downgrading the phone is a little different than other android phones Ive used and i thought this post may help someone out. Im the type of person who wont mod something unless i know i can get back to where i started and with this sbf and "how to" you wont have to worry about that.
pjsockett said:
Do not restore a 2. 1 nandroid in 2. 2. The update changes the bootloader and recovery versions which aren't part of the backup. The phone will just hang at the MOTO logo. I learned this the hard way. You have to use the sbf. You can then apply your nandroid to get everything back.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
also i believe it updates the radio and kernel.. thanks pj for explaining that
If I wanted to go to 2.1 ,don't see why...at the moment.
Before I do a SBF would it be ok to to do a data wipe and a partition wipe in recovery mode then do the SBF bootrecovery deal???
Thank You
after you upgrade to 2.2 koush has a new DroidXBootstrap.apk out
go back to his website and DL it and reinstall then rerun bootstrap.
after that rom manager can do backups or recoveries.
sucks you all get bootloop with sbf, ive done it twice now and has worked fine
keeps all my apps and stuff
goodluck
pjsockett said:
Do not restore a 2. 1 nandroid in 2. 2. The update changes the bootloader and recovery versions which aren't part of the backup. The phone will just hang at the MOTO logo. I learned this the hard way. You have to use the sbf. You can then apply your nandroid to get everything back.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I'm kinda confused what you mean? I did a nandroid backup of 2.1 with the latest bootstrap and clockworld.
I just remember using a nandroid on my girl's moto droid and I went from 2.2 all the way back to 2.0.1.
when trying to sbf on my Mac I get this -bash: ./sbf_flash: Permission denied? Any suggestions I have been asking for 2 days now hopefully someone can help. Thanks
taypotts said:
I'm kinda confused what you mean? I did a nandroid backup of 2.1 with the latest bootstrap and clockworld.
I just remember using a nandroid on my girl's moto droid and I went from 2.2 all the way back to 2.0.1.
Click to expand...
Click to collapse
I also did the same from my Eris. The major difference is that the recovery on those devices were completely replaced not just patched. When you restore a 2.1 nandroid from a 2.2 droid x the android 3e recovery is not replaced. When the system tries to boot it sees that as an invalid recovery image and won't boot, it just hangs at the moto logo forever. When you upgarde to 2.2 on a Droid or an Eris your still using clockwork recovery or amon ra's recovery and not upgrading to the android 3e system recovery. Maybe it was just a fluke that it didn't work for me but it makes sense as to why it would fail, otherwise we would be able to have a full custom recovery.
dscottjr81 said:
when trying to sbf on my Mac I get this -bash: ./sbf_flash: Permission denied? Any suggestions I have been asking for 2 days now hopefully someone can help. Thanks
Click to expand...
Click to collapse
From my understanding sbf_flash is for linux only. To flash on mac you need to use rsd lite with a virtual windows os.
http://www.droidforums.net/forum/droid-hacks/38671-flashing-sbf-mac.html
i cant get my phone to flash. i have done this 2 before with my droid x on 2.1 but now that i am on 2.2 every time i try to use RSDlite, i connect my phone and select my SBF but the START button will not light up so i cannot proceed. any thoughts.. im running windows 7 64 and i have all the drivers working for my phone.
failed sbf flash
Hey guys, i got an error in RSD that says "Failed flashing process. Failed flashing process. Phone[0000]: Phone is not compatible with muli-interface super-file. (0x703B); phone connected
Any ideas, i'm really new to android stuff, been using WM forever.
Thanks for the help
please ignore me as I can't read apparently
if anyone else sees this remeber to copy the pst_flash file to the Program Files/Motorola/RSDLite directory
tacticalmedicokc said:
please ignore me as I can't read apparently
if anyone else sees this remeber to copy the pst_flash file to the Program Files/Motorola/RSDLite directory
Click to expand...
Click to collapse
thanks. i had the same problem.
Tivo to the rescue! (edit: added numbers to make it easier to specify where to look for users caught in the middle somewhere)
1. You can do one of two things to get back to 5.5.886
You can use RSD Lite to sbf back to stock 886
http://briefmobile.com/droid-bionic-receives-fastboot-recovery-files
Or you can use this One click restore and root to get back to stock 886
http://forum.xda-developers.com/showthread.php?t=1279825
Both of these will erase your data (but not your sd card). There's no way around that.
Because you already updated your radio files and theres no way to downgrade that, the one click root method will not work anymore. There's no stopping that, its already been done.
2. Because of P3droid, however, there is a manual method of rooting that still works.
Follow this link
http://www.mydroidworld.com/forums/...-your-phone-back-upgrade-path.html#post106072
Look at the second post. I tested this method after I, myself, went to 893 and SBFed back to 886. It works.
3. After that you can follow this guide starting from step 5 to get keep root through any upgrade.
http://androidforums.com/bionic-all-things-root/434407-how-flash-893-update-maintain-root.html
4. Then download the 886>893 file from here and put it on your SD card
http://www.mydroidworld.com/forums/...found-update-files-read-before-you-flash.html
5. Boot phone into STOCK RECOVERY (not clockwork mod recovery). When the triangle is up, press BOTH volume keys. Use Volume Down to navigate and Volume Up to select the install zip option. Select the 886>893 file you just downloaded and let it install. It will take a while.
Boot back up after that and you should be rooted and be running 5.5.893
Tivo7 said:
Tivo to the rescue!
You can do one of two things to get back to 5.5.886
You can use RSD Lite to sbf back to stock 886
http://briefmobile.com/droid-bionic-receives-fastboot-recovery-files
Or you can use this One click restore and root to get back to stock 886
http://forum.xda-developers.com/showthread.php?t=1279825
Both of these will erase your data (but not your sd card). There's no way around that.
Because you already updated your radio files and theres no way to downgrade that, the one click root method will not work anymore. There's no stopping that, its already been done.
Because of P3droid, however, there is a manual method of rooting that still works.
Follow this link
http://www.mydroidworld.com/forums/...-your-phone-back-upgrade-path.html#post106072
Look at the second post. I tested this method after I, myself, went to 893 and SBFed back to 886. It works.
After that you can follow this guide starting from step 5 to get keep root through any upgrade.
http://androidforums.com/bionic-all-things-root/434407-how-flash-893-update-maintain-root.html
Then download the 886>893 file from here and put it on your SD card
http://www.mydroidworld.com/forums/...found-update-files-read-before-you-flash.html
Boot phone into STOCK RECOVERY (not clockwork mod recovery). When the triangle is up, press BOTH volume keys. Use Volume Down to navigate and Volume Up to select the install zip option. Select the 886>893 file you just downloaded and let it install. It will take a while.
Boot back up after that and you should be rooted and be running 5.5.893
Click to expand...
Click to collapse
I will give this a try tonight... I hosed up one the Bionic's last night....
I was able to get it back to 866 but lost the root. I tired to re-root it and it failed. So I can not re-do cheesecake and get to [ROM] [R3]BLURR3D V2.0 PBX MOTO Kernel .
Crossing fingers....
~Socks
sockstobed said:
I will give this a try tonight... I hosed up one the Bionic's last night....
I was able to get it back to 866 but lost the root. I tired to re-root it and it failed. So I can not re-do cheesecake and get to [ROM] [R3]BLURR3D V2.0 PBX MOTO Kernel .
Crossing fingers....
~Socks
Click to expand...
Click to collapse
Yeah you wont be able to use the current version of any one click root method anymore because you upgraded your kernel and radio and those cant be downgraded.
The only method I know that works after updating kernel/radio is p3droid's manual method.
What if you flash the original full FXZ file using RSD lite, will that put back the original kernal and radios?
No. It is currently impossible to downgrade kernels and radios.
OK, so question, pardon my newbness, coming from a Thunderbolt and bought the Bionic yesterday, I rooted, flashed bionic bootstrap, and made a backup of my stock rom. Then I flashed Blurred 2.0 which is based on .893. If for what ever reason I need to go back stock, can I do so, or am I hosed?
You can always go back to 886 by flashing the system.img file.
If you're talking about doing that while still running that ROM, I don't think you should. I don't kno what would happen.
You will never be able to downgrade your kernel or radio files though (these keep you from using the root method most people know). P3droid's manual method works though.
Wait, so when I want to sell this phone in a few weeks, can somebody post a method to return back to stock, etc?
Sent from my DROID BIONIC using XDA App on UNL3ASH3D R3BLURR3D V2.0 and will continue to be sent from here until I buy the Galaxy Nexus 32GB
Nvm, I thought I had read that one click restore wouldn't work, but it will
Sent from my DROID BIONIC using XDA App on UNL3ASH3D R3BLURR3D V2.0 and will continue to be sent from here until I buy the Galaxy Nexus 32GB
Tivo7,
i am back to .889 rooted and ready to brick my phone again wow Motorola really trying but thanks to everyone involve we could continue modding our phones with no worries.
thank you again.
I just bootstrapped my backup of my stock .886 back no problem, from blurry 2.0. Booted up fine, everything appeared to be working fine. Then I went back to my back up of blurry 2.0 and it went back fine.
droid3d said:
Tivo7,
i am back to .889 rooted and ready to brick my phone again wow Motorola really trying but thanks to everyone involve we could continue modding our phones with no worries.
thank you again.
Click to expand...
Click to collapse
Just follow my guide and you can get to 893 rooted.
You're welcome.
stevessvt said:
I just bootstrapped my backup of my stock .886 back no problem, from blurry 2.0. Booted up fine, everything appeared to be working fine. Then I went back to my back up of blurry 2.0 and it went back fine.
Click to expand...
Click to collapse
Nice. You can go to 893 with my guide.
Th3ory works on 893.
Thats what I was on,...went from th3ory R3 Blurr3d 2.0, based on .893, back to my stock .886 backup I made in bootstrap, worked fine, and back to the back up of Blurr3y I made in bootstrap again. No problems at all.
stevessvt said:
Thats what I was on,...went from th3ory R3 Blurr3d 2.0, based on .893, back to my stock .886 backup I made in bootstrap, worked fine, and back to the back up of Blurr3y I made in bootstrap again. No problems at all.
Click to expand...
Click to collapse
Cool cool.
stevessvt said:
What if you flash the original full FXZ file using RSD lite, will that put back the original kernal and radios?
Click to expand...
Click to collapse
I was unable to use the original full FXZ. When I tried to go back to stock 886, RAD would fail to flash. I had to use P3's method to get back to 886, and then used his method to root.
This is P3's post...
How to get your phone back on the upgrade path...
http://www.mydroidworld.com/forums/droid-bionic-forum/9800-how-get-your-phone-back-upgrade-path.html
Thanks, but since asking that question Ive nandroided back to stock .886 with a backup ive made. I know the radios and kernals are still .893, but everything worked fine.
stevessvt said:
Thanks, but since asking that question Ive nandroided back to stock .886 with a backup ive made. I know the radios and kernals are still .893, but everything worked fine.
Click to expand...
Click to collapse
Awesome. Good to know.
stevessvt said:
OK, so question, pardon my newbness, coming from a Thunderbolt and bought the Bionic yesterday, I rooted, flashed bionic bootstrap, and made a backup of my stock rom. Then I flashed Blurred 2.0 which is based on .893. If for what ever reason I need to go back stock, can I do so, or am I hosed?
Click to expand...
Click to collapse
If that's all you did you don't have 893 radio or kernel you have to do forever root and cheesecake app to get OTA update blurred 2.0 is based on update but dose not flash kernel or radio
Sent from my DROID BIONIC using xda premium
This saved me. Forever root didn't take when I updated to .893 so I had to do it manually off of a nandroid restore. Thank you so much!
anuraj1 said:
This saved me. Forever root didn't take when I updated to .893 so I had to do it manually off of a nandroid restore. Thank you so much!
Click to expand...
Click to collapse
You're welcome
I just didn't want others to feel all the pain I did on this, so I posted the steps I took to fix it.
This is basically just a guide putting everyone else's guides together in one place.
Hello. First off, I want to thank everyone for their hard work here. I have followed many tutorials and have seen many great conversations to keep noobs like me from making mistakes when trying to delve into the world of ROMs and rooting. However, I did encounter some troubles while installing the ICS rom onto my bionic (running on .902). I think I may have accidentally overwritten the stock rom backup that I made with safe strap or whatever that app is (I'm sorry, like I said, I am a complete noob). Is there a way to restore the phone to stock, as in before I even touched it, even if the backup I made during the process is gone by my mistake?
I'm sure this has been asked a million times, and if so, I apologize, but as I noob, I have no idea how to even begin to search for clues. Walkthroughs would be nice, but links are fine too, since I'm sure there are plenty of the same questions out there.
Thanks!!!
Pete's motorola tools check it out you will find what you need there just google Pete's tool bionic
Sent from my XT875 using XDA App
Also I believe if you disable safe mode it will boot up rooted stock from don't quote me on that I am not for sure. Also I believe there is a unroot method in development not sure if it is for 902 or not though..
Sent from my XT875 using XDA App
Thanks for the info!
No problem here to help
Sent from my AXI0M IONIC using XDA App
R3l3as3DRoot and for3v3r root will take you back to 886
Sent from the Evil Empire
Thanks! Can that be used after the .902 update? Is it possible to do a dual-boot type deal between stock and the ICS version I have installed? I've seen mentions of dual-boot around here, but I can't get a clear grasp on whether it is possible or not, or if so, how to do it. Thank you very much!
Lonepalm said:
Thanks! Can that be used after the .902 update? Is it possible to do a dual-boot type deal between stock and the ICS version I have installed? I've seen mentions of dual-boot around here, but I can't get a clear grasp on whether it is possible or not, or if so, how to do it. Thank you very much!
Click to expand...
Click to collapse
Yeah I'm sure you can.
Get on stock .902(here).
Install SafeStrap.
Backup Stock Rom by Toggling "SafeMode"
Boot up ICS.
When you want to go to Stock .902 undo "SafeMode" and the Stock Rom should boot up on Reboot
Thanks for the answer! Hopefully I can give this a shot soon!
Lonepalm said:
Thanks for the answer! Hopefully I can give this a shot soon!
Click to expand...
Click to collapse
Yeah those instructions above are correct. I just came back from the AOKP ICS Rom to stock. 902. Worked fine. I have all my apps and stuff too.
Sent from my DROID BIONIC using Tapatalk
Don't know what I'm doing wrong here, but when I plug my phone in to my PC, the phone realizes it, but doesn't seem like the PC does. Also, when I open RSD Lite and try to load the file, it doesn't do anything after clicking "Start". Please help me try to diagnose what I may be doing wrong if you can! Thank you!
Lonepalm said:
Don't know what I'm doing wrong here, but when I plug my phone in to my PC, the phone realizes it, but doesn't seem like the PC does. Also, when I open RSD Lite and try to load the file, it doesn't do anything after clicking "Start". Please help me try to diagnose what I may be doing wrong if you can! Thank you!
Click to expand...
Click to collapse
Enable Usb Debugging and Unknown Sources. Download Motohelper drivers
Sent from my DROID BIONIC using Tapatalk
I'm sorry I probably should be a little more specific. I have both of those enabled and I do have the Motohelper drivers installed. I am following the steps here: http://forum.xda-developers.com/showthread.php?p=22758211#post22758211
On step 8, I do not see a file named FXZ or a file with that extension, but I figured it was the file with the name that the zip file had. I chose that file after clicking "..." and hit Start, but it doesn't do anything.
I am running the ICS version cyanogen mod 9.0.0-rc0-droid_bionic-kang build number alpha_2012_02_10
I already have SafeStrap installed (used that to get this rom on). So, looks like I'm stuck on or around step 8 from the other steps posted. Once I can get past that, I can continue with the steps posted in this thread!
Thanks!!!
Lonepalm said:
I'm sorry I probably should be a little more specific. I have both of those enabled and I do have the Motohelper drivers installed. I am following the steps here: http://forum.xda-developers.com/showthread.php?p=22758211#post22758211
On step 8, I do not see a file named FXZ or a file with that extension, but I figured it was the file with the name that the zip file had. I chose that file after clicking "..." and hit Start, but it doesn't do anything.
I am running the ICS version cyanogen mod 9.0.0-rc0-droid_bionic-kang build number alpha_2012_02_10
I already have SafeStrap installed (used that to get this rom on). So, looks like I'm stuck on or around step 8 from the other steps posted. Once I can get past that, I can continue with the steps posted in this thread!
Thanks!!!
Click to expand...
Click to collapse
SafeStrap disables ADB(that Im sure of) which will not let RSD run(im pretty sure) you have to select the xml file
Sent from my DROID BIONIC using Tapatalk
Yes, the XML file is the one I select. However, it will not do anything in RSD. Is there anything I can do to enable ADB in order to let RSD run?
Update: I found a way to do it. I think things are going okay so far. Looks like it is installing. If it does install successfully, I would like to do everything perfectly right going forward.
So, after this is installed, I will want to:
1. Get root access again using Motofail? I assume doing this return to stock will remove root access.
2. Install SafeStrap. Once that is done, I toggle Safemode to enabled, which will backup my stock rom and protect it from being overwritten?
3. Then, flash ICS from the zip files on my sdcard?
Lonepalm said:
Update: I found a way to do it. I think things are going okay so far. Looks like it is installing. If it does install successfully, I would like to do everything perfectly right going forward.
So, after this is installed, I will want to:
1. Get root access again using Motofail? I assume doing this return to stock will remove root access.
2. Install SafeStrap. Once that is done, I toggle Safemode to enabled, which will backup my stock rom and protect it from being overwritten?
3. Then, flash ICS from the zip files on my sdcard?
Click to expand...
Click to collapse
Yes sir.
Sent from my DROID BIONIC using Tapatalk
Hi, when i try to send a text to multiple people with one text message, I'm only allowed to send to 10 people max, is there a way to get rid of this?
Cheers.
Check this thread here
http://forum.xda-developers.com/showthread.php?t=1371755
I believe this could be a limitation of the ROM or the service you are using. Search the developer forum for a ROM that gets past this limit and check with your phone service provider (I read somewhere that Verizon has this limit, but can't vouch for that as I am in different country)
thanks, but I am new to this whole android world, this is my first android coming from a nokia n900.
I have been reading, but it seems I need to root my phone which is now difficult because as soon as I received the phone i updated it and now have the kernel LA6 instead of original LA4 which is more difficult to root.
As for the thread you provided matius44, does the .apk file only work with ics roms or can one install it with just a rooted GB rom.
----
Just so I can be sure, I do want to root, but I'm slightly confused, is it correct in saying that I need to downgrade the fw and kernel to an older stock rootable rom then root the phone? or is this wrong?
Yes- have a look at the developer forum - there are details here...
http://forum.xda-developers.com/showthread.php?t=1329360
and here..
http://forum.xda-developers.com/showthread.php?t=1424997
Dr Ketan is the man!
salespalace said:
thanks, but I am new to this whole android world, this is my first android coming from a nokia n900.
I have been reading, but it seems I need to root my phone which is now difficult because as soon as I received the phone i updated it and now have the kernel LA6 instead of original LA4 which is more difficult to root.
As for the thread you provided matius44, does the .apk file only work with ics roms or can one install it with just a rooted GB rom.
----
Just so I can be sure, I do want to root, but I'm slightly confused, is it correct in saying that I need to downgrade the fw and kernel to an older stock rootable rom then root the phone? or is this wrong?
Click to expand...
Click to collapse
That used to be the case, but there is now an easier way which flashing pre rooted ROMs directly and you're good to go, here is the thread:
http://forum.xda-developers.com/showthread.php?t=1535025
As for the .apk mod, I never tried myself honestly but there are versions for GB and for ICS, any .apk with ZCLP in it's name is for ICS you don't need that, take the other ones
I've tried dr. ketan's way and it didnt work for me, maybe i didnt know what I was doing,
Ill try these pre rooted roms, I just basically flash them to the phone, does all my data in my phone get wiped off clean? if so, what do i use to make a backup.
btw sorry for all these questions.
and thanks in advance.
It's been that long since I rooted my phone I've forgotten how to do a backup without rooting! Titanium backup needs root.
Have you tried booting into recovery mode then doing a backup from the menu that appears (vol up+home then press power until Galaxy Note boot screen appears then let go of all buttons) I'm pretty sure you can backup from there.
salespalace said:
I've tried dr. ketan's way and it didnt work for me, maybe i didnt know what I was doing,
Ill try these pre rooted roms, I just basically flash them to the phone, does all my data in my phone get wiped off clean? if so, what do i use to make a backup.
btw sorry for all these questions.
and thanks in advance.
Click to expand...
Click to collapse
You can have it either ways, wiped clean or not, up to you..
At the pre rooted ROMs thread there is a screen shot showing the three file you will find in the zips and the places they should be put at in Odin, if you do NOT want to wipe your data do NOT choose the CSC file, only flash PDA and phone (modem)
Or you can use Titanium Backup to backup your user apps only, do NOT backup system apps but your settings will be lost of course
Your preference
EDIT: Sorry forgot you don't have root lol! Sorry have no idea how to backup without root, try the poster above me suggested
Congrats Matius! 1000 posts! That is great work!
no you can't backup using that method, it just give me options to reboot, wipe everything off and some other things. all i need to backup is mainly my contacts and some data, ill try kies.
Kies should work. I wish I could remember what I did to create the backup - I've done a quick google and only found using adb and a terminal prompt, which I have never used. A quick search of Google Play shows some that may be worth a try and are free.
Wish I could be more help but for the life of me can't remember what I did that first night with my Note and got it to backup.
Good luck with Kies and enjoy flashing ROMs!
even kies doesnt work. i think astro backup will backup my files, as for settings ill just have to deal with it.
OK - good luck!
BTW - If you get heat issues after flashing - don't panic! Leave the phone off for five to ten minutes to cool down then charge it for an hour with the screen off. I found this was my biggest worry when I started flashing. Got really hot - thought the screen would melt. Now I just use the above process and never have problem.
All the best!
TempusFudgeIt said:
Congrats Matius! 1000 posts! That is great work!
Click to expand...
Click to collapse
Loool I just noticed this! Thanks!
salespalace said:
no you can't backup using that method, it just give me options to reboot, wipe everything off and some other things. all i need to backup is mainly my contacts and some data, ill try kies.
Click to expand...
Click to collapse
Backup contacts with your Google account, most reliable way
thanks all, cant press thanks anymore, 8 thanks limit.
im now on the process rooting, but accidentally added the csc file, oh well..
I don't know if ive rooted, lol.
erm, odin says successful, but nothing seems to be removed, and i mean nothing, everything is still there, even my apps. but i do have two new apps or maybe one not sure. this superuser app, the other is a facebook camera app.
am i rooted? if so... thanks all. now to read through forum to see what the best gingerbread rom is or if ics rom is worth using now.
salespalace said:
I don't know if ive rooted, lol.
erm, odin says successful, but nothing seems to be removed, and i mean nothing, everything is still there, even my apps. but i do have two new apps or maybe one not sure. this superuser app, the other is a facebook camera app.
am i rooted? if so... thanks all. now to read through forum to see what the best gingerbread rom is or if ics rom is worth using now.
Click to expand...
Click to collapse
To make sure you are rooted use a file explorer app (root explorer or ES file explorer)and try to copy a file (pic, video or anything) to /system folder
If it's saved then congrats you're rooted
As the title says, I'd like to root, but with somewhat limited knowledge on the phone and it's processes, and no knowledge of scripting/coding, I want to avoid taking too much risk.
I've been stock with the D3 since I got the phone in 2011, found out we aren't getting ICS, and we aren't getting unlocked by Moto. (pissed off!) >.<
The way I see it I have 2 options, 1) stay stock until my contract is up in march and get a new phone, or 2) Give root a go, and Have ICS ported to me via a Custom Rom, and do more research as I go. (I like being hands-on when it comes to learning).
As to my phone, I am running 906 OTA Stock as it gets .. -_-' I'd like to root using
http://forum.xda-developers.com/showthread.php?t=1686911 <-- ovelayer's method in this thread. (thank you Ovelayer, I can't seem to find that button so I'm just acknowledging you here since I'm new to this kind-of thing).
I just need some clarification
in his thread it says to dl the 1-click .exe, then the Motofail root tool? or is that also a way to root? I got confused with that.
Afterwards, I dl safestrap once I'm rooted? or should I just dl it and put it onto my phone all at once?
Apologies for the noobness. I'd rather be a noob asking questions than a retard who goes ahead and does things and finds out he screwed up too late.
Rooting is done to get superuser permissions within Android so you can install some advanced apps and modify system files which can all be done from within the stock ROM. Rooting then flashing an unofficial ROM is a little more advanced and something I haven't done yet so I can't help you much there. I'm waiting for something a little more stable since my Droid 3 is my main phone. You can read Hash of Codes site (the developer of ICS/JB for the Droid 3) on how to safestrap:
http://blog.hash-of-codes.com/how-to-safestrap/
To root use Motofail. I know it says its for the Droid 4 but the original Droid 3 root exploit was patched with the latest OTA so we have to use the Droid 4 method called Motofail:
http://vulnfactory.org/blog/2012/02/11/rooting-the-droid-4-a-failed-bounty-experiment/
DróidScìon said:
As the title says, I'd like to root, but with somewhat limited knowledge on the phone and it's processes, and no knowledge of scripting/coding, I want to avoid taking too much risk.
I've been stock with the D3 since I got the phone in 2011, found out we aren't getting ICS, and we aren't getting unlocked by Moto. (pissed off!) >.<
The way I see it I have 2 options, 1) stay stock until my contract is up in march and get a new phone, or 2) Give root a go, and Have ICS ported to me via a Custom Rom, and do more research as I go. (I like being hands-on when it comes to learning).
.
Click to expand...
Click to collapse
My D3 has Maverick as non-safe for daily driver and the latest Hashcode for fun. I find that to be the best combination. Once Hash finishes the camera and JB is working reasonable well, JB will be my DD.
I also have an SGS3, TF300T, and a Spica, all of them rooted.
once rooted, make sure you use safe strap. It makes roms easy to try out before having to settle
Sent from my DROID3 using Tapatalk
Alright, so it appears I have been rooted, and still looks like I'm in .906 OTA. It was pretty easy using Motofail, actually. So, now I have Superuser and Titanium Backup(free, for now) on my D3.
Now, you guys mentioned Safestrap? Can you guys give me a suggestion on which one to use? There appear to be a few of them. 1 is SAFESTRAP v2.10 Recovery (Kexec) and the other is a Tweaked version of Safestrap v1.08e (Non-Kex) which one is better, or a better question, whats the difference between the 2?
DróidScìon said:
Alright, so it appears I have been rooted, and still looks like I'm in .906 OTA. It was pretty easy using Motofail, actually. So, now I have Superuser and Titanium Backup(free, for now) on my D3.
Now, you guys mentioned Safestrap? Can you guys give me a suggestion on which one to use? There appear to be a few of them. 1 is SAFESTRAP v2.10 Recovery (Kexec) and the other is a Tweaked version of Safestrap v1.08e (Non-Kex) which one is better, or a better question, whats the difference between the 2?
Click to expand...
Click to collapse
Safestrap 1.08 is the 'normal' ssafestrap
Safestrap 1.08e/f/g is an advanced safestrap with extra features like touch etc but not by hashcode
Safestrap 2.10 is the latest which allows the new kernel with the kexec ICS/JB to be used.
2.10 It appears to also work fine with normal roms so i'd use that
DróidScìon said:
As to my phone, I am running 906 OTA Stock as it gets .. -_-' I'd like to root using
http://forum.xda-developers.com/showthread.php?t=1686911 <-- ovelayer's method in this thread. (thank you Ovelayer, I can't seem to find that button so I'm just acknowledging you here since I'm new to this kind-of thing).
I just need some clarification
in his thread it says to dl the 1-click .exe, then the Motofail root tool? or is that also a way to root? .
Click to expand...
Click to collapse
If you were stock 906, there was no reason to run the 1-click.exe - that's only for people who rooted their phones and deleted bloatware to get the phone back to stock, or people whose phones are bricked somehow. Coming from stock, just running Motofail was enough to root.
I will concur with everyone here that running rooting, installing and running Safestrap, and installing a custom ROM - and leaving your rooted stock alone - is the best way to go. It will be a lot easier to unroot later on if you want to sell the phone, etc.
Alright, Safestrap 2.01 is installed. According to Hash's Blog, I should create a backup when in the Recovery Menu since its my first time accessing the Safestrap Menu. Can I get a little more detail as to how I do this? When I select backup, it asks if I want to backup from Internal SD or External? I'm assuming Internal, but I just want to err on the side of caution and ask those who already know.
DróidScìon said:
Alright, Safestrap 2.01 is installed. According to Hash's Blog, I should create a backup when in the Recovery Menu since its my first time accessing the Safestrap Menu. Can I get a little more detail as to how I do this? When I select backup, it asks if I want to backup from Internal SD or External? I'm assuming Internal, but I just want to err on the side of caution and ask those who already know.
Click to expand...
Click to collapse
It doesn't matter. Choose which has enough space.
DróidScìon said:
Alright, Safestrap 2.01 is installed. According to Hash's Blog, I should create a backup when in the Recovery Menu since its my first time accessing the Safestrap Menu. Can I get a little more detail as to how I do this? When I select backup, it asks if I want to backup from Internal SD or External? I'm assuming Internal, but I just want to err on the side of caution and ask those who already know.
Click to expand...
Click to collapse
It's asking where to backup TO, like the post above me, choose wherever has space. Backups are about 1GB. You may wish to move it to your computer after if you don't have much space on your device. You can always stick it back on your external sd via card reader if needed, but it's really hard to brick while using safestrap
Also one of the most common errors for noobs on safestrap is, the first time you engage safe mode, you must flash a rom. Since its using a different partition for system, it's currently empty and if you switch to safe and try to boot you will get a black screen as you are booting an empty partition. All gingerbread roms are stable but there are no ics roms that are fully functional, although one is in the works
Sent from my XT860 using xda premium
I saw that, and before I rooted, I did a Factory Reset on the phone and formatted my SD card. So I have 11+gig free on Internal and 15+gigs on External.
Now, I just need to learn to Flash RoMs (probably more to it than just hitting a button that says flash .zip) and find some info on the "must-have" apps for a rooted phone.
Well guys, I've successfully installed CM9 Kexec ICS Sept 5th update from Hashcode on my Droid 3! Now, another big question, How will I restore stuff like contact and account info? I've read somewhere around here that Restoring Data from my google account is a bad idea?? Are there other ways of doing so without Titanium Backup, or should I just go ahead and buy the Pro Key? (currently limited funding)
DróidScìon said:
Well guys, I've successfully installed CM9 Kexec ICS Sept 5th update from Hashcode on my Droid 3! Now, another big question, How will I restore stuff like contact and account info? I've read somewhere around here that Restoring Data from my google account is a bad idea?? Are there other ways of doing so without Titanium Backup, or should I just go ahead and buy the Pro Key? (currently limited funding)
Click to expand...
Click to collapse
If your contacts are on your google account they will show up.
What other account info do you mean?
You should go ahead and restore contacts. just go to Settings>Accounts and Sync>Google, then turn contacts sync on.
Endoroid said:
Also one of the most common errors for noobs on safestrap is, the first time you engage safe mode, you must flash a rom. Since its using a different partition for system, it's currently empty and if you switch to safe and try to boot you will get a black screen as you are booting an empty partition. All gingerbread roms are stable but there are no ics roms that are fully functional, although one is in the works
Click to expand...
Click to collapse
I must have made another noob mistake. Everything went well, up until my first startup with the new OS (cyanogenmod9). It has been at the startup screen for over 15minutes right now. I must say, it is one awesome startup screen, with the blue effects and all, but I would love to get to the desktop/homescreen, haha.
If you guys have any advice I would greatly appreciate it. This is a Droid 3, it was rooted a couple hours ago, I did the safestrap as described, created a backup file, etc. My only guess is I jumped the gun by trying this OS on my Droid3 and it may still be under development? FWIW to you, this is the first I've rooted or modded a smartphone in my life, from 0-full speed in a couple hours is what I was shooting for using everyone elses experience.
thanks
Make sure you wiped the data/user settings in Safestrap. You lose your apps & settings but those items from a previous install can cause that type of boot issue.
Sent from my XT862 using xda app-developers app
Phibernaut said:
Make sure you wiped the data/user settings in Safestrap. You lose your apps & settings but those items from a previous install can cause that type of boot issue.
Sent from my XT862 using xda app-developers app
Click to expand...
Click to collapse
thanks. since my last post I used a more detailed how-to, and wiped 3 different areas for data. Now, i had only a black screen (with power, barely lit) and it never even got to the cool blue screen.
I'm currently in safestrap after pulling my battery again, just trying to figure out how to revert back to my standard OS (rooted) and try a ROM like MavRom since it's suppoedly fully capable and stable. I'd love ICS, but I just want a working phone right now
---------- Post added at 10:25 PM ---------- Previous post was at 10:14 PM ----------
good news is, I did enough steps correctly, that I was able to startup in my unsafe mode, and my normal rooted system is functioning fine. That makes me very happy.
This duel boot thing is pretty cool, reminds me of having bootable thumb drives on my old linux system with different OS's. I hope i can get a seperate OS working, however, that fits my needs for a day to day functional phone, without all of Verizon's crap on it
Once rooted use titanium backup to back up apps and data.
Only restore with the same ROM though, the following is in increasing order of risk
restore app only to exact same ROM+version
restore app+data to same ROM+ver
restore app only to update of same ROM
restore app+data to updated ROM version
play chicken with a bus on a highway
restore apps to different kernel e.g. CM7 backup => restore to CM9
check to see what a gun firing looks like down the barrel
restore app+data to different kernel
restore app+data to an older ROM or kernel
do anything at all with system apps+data if you don't know what you're doing