I am having difficulties finding ROM twhich is not SODing every 2-3 hours. I have tried:
[CM7][KANG][FEB25] temasek's KANG BUILD P204-69 - FINAL RELEASE
[ROM][MOD] WIUI 2.2.24 Stable (GB) v4 (ICS) b0 - MULTiLanguage
update-cm-7-20120226-NIGHTLY-p990-signed
w/ and w/o Etanas kernels.
With those ROMs I have:
after-call SOD
charging SOD
also there is "SD card not found" bug with CM7 roms/kangs.
Modaco's GR6 looks more stable. SODs are rare but with Spica's kernels it starts to behave similar to CM7.
So if you have stable 2X with no or very rare (rare = max 1 in week) SODs - please tell me - which ROM with which kernel (if any) are you using? Any other mods/settings/apps?
Thank you!
SoD ???
Sent from my Optimus 2X using XDA App
nexus2515 said:
SoD ???
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Screen Of Death
deff_ins said:
I am having difficulties finding ROM twhich is not SODing every 2-3 hours. I have tried:
[CM7][KANG][FEB25] temasek's KANG BUILD P204-69 - FINAL RELEASE
[ROM][MOD] WIUI 2.2.24 Stable (GB) v4 (ICS) b0 - MULTiLanguage
update-cm-7-20120226-NIGHTLY-p990-signed
w/ and w/o Etanas kernels.
With those ROMs I have:
after-call SOD
charging SOD
also there is "SD card not found" bug with CM7 roms/kangs.
Modaco's GR6 looks more stable. SODs are rare but with Spica's kernels it starts to behave similar to CM7.
So if you have stable 2X with no or very rare (rare = max 1 in week) SODs - please tell me - which ROM with which kernel (if any) are you using? Any other mods/settings/apps?
Thank you!
Click to expand...
Click to collapse
I use DjangoManouche1.0 with stock kernel and I don't have any SOD
Envoyé 2X plus vite avec mon P990
Screen of death. Screen goes black and you can wake it up unless you remove battery. I have tried couple of roms(stock with spica kernels,cm7,gueste hibryd 3.1)and i didnt have any sods.
Sent from my Optimus 2X using XDA App
Django 1.0 with RC11-R no SOD here
Sent from my LG-P990
Every phone is different... but if your phone is like mine... you can install any GINGER rom based on STOCK rom. Not Cyanogen.
For example, v20q (the last version available).
You must change the baseband too. For example the 725 from v20q.
If you want to change the kernel, the R11-R from spica is great, after that, all versions have problems in some phones.
Regards!
Have you checked that is not related to one of the programs you have installed? I used to have SODs until I removed a battery saver I had installed, that is half a year ago and I haven't had any since then.
Just to be sure in the safe side you might try to use your phone for a whole week w/o any apps and see if that is the case.
BTW, currently I am using CM7 nightly build 204.
Cheers.
I'm on Temasek's kangs with various Vadonka's kernels - for quite a long time. No problms found. I cannot recall problems on other roms either (I used mainly MoDaCo ones).
How about doing the clean install, i.e. do a full wipe, cache wipe, dalvik cache wipe, then install e.g. Temasek Kang #69. Just that - bare system. Then check if your phone is still unstable.
EDITED: the only app that you should install is GetRIL - to get your BB and RIL in sync. BTW, which BB are you on?
Some phones can't handle low frequecies (216MHz), you may change the lowest freq. with setCPU or an other tool like this. Maybe it helps.
nexus2515 said:
SoD ???
Click to expand...
Click to collapse
well this suits best. also BSOD is used very often here to name this problem, but the is nothing blue actually
McGiverGim said:
... For example the 725 from v20q.
If you want to change the kernel, the R11-R from spica is great...
Click to expand...
Click to collapse
BB is one more unsolved mistery - i cant understand - are all 725 the same or is there diference between them? i also tried that 1120 that was posted here on forums - that BB was buggy as hell for me so i went back to 725.
ernestus said:
Have you checked that is not related to one of the programs you have installed?
BTW, currently I am using CM7 nightly build 204.
Cheers.
Click to expand...
Click to collapse
it might be software, but i am not using any battery saving apps. tho im installing the same software after every clean install - so this might be the case.
mipr said:
How about doing the clean install, i.e. do a full wipe, cache wipe, dalvik cache wipe, then install e.g. Temasek Kang #69. Just that - bare system. Then check if your phone is still unstable.
EDITED: the only app that you should install is GetRIL - to get your BB and RIL in sync. BTW, which BB are you on?
Click to expand...
Click to collapse
i am always doing full wipe. im on 725 and im using GetRIL with recomended RIL.
snel76 said:
Some phones can't handle low frequecies (216MHz), you may change the lowest freq. with setCPU or an other tool like this. Maybe it helps.
Click to expand...
Click to collapse
ill check it!
Thanks for the tips guys! First ill check Temasek Kang #69 without soft and will see what happens.
I use an older Temasek with IronKernel00. About 2 weeks old install? Never flashed another Baseband, i think i am on the stock(?) 725.
Not a single SOD. But again, never had a SOD on the stock ROM from LG, even in the Froyo times. Well, had a SOC when the phone were OC'ed to 1.55
Been using Temasek's kang for a while and it is quite stable. I'm on stock kernel as well.
Since you also mentioned that your device sometimes fails to detect your SDcard, I believe it could be corrupted. Have you tried formatting it? (make a backup first).
Sent from a galaxy far, far away...
I have been using the ICS Nova HD from the very start it went aviable for download and no SoD yet.
Hi. I had the same problems as you do when I was using Juice Defender with its profiles.
A month ago I deleted it and started using setcpu and I didn't had any SOD anymore.
Using tamasek's kang 69+ Vadonka's kernel
any more lucky cm7 users?
There aren't "lucky" users, sods are caused mainly by:
-radio errors: the phone shuts-off because baseband encounters a critical error, and kernel goes in panic. This is common in cm7 roms, because ril is closed-source (so radio commands are obtained via reverse-engeenering), so we don't know the exact commands and radio management. A normal phone usage should not encounter this kind of SoD. Juicedefender or Toggle2G tweak continuously radio settings (i.e. internet activation or 2G/3G switching), so in cm7 these app are not recommended.
-kernel panic: phone shuts-off because of a generic kernel panic. The main cause of kernel panic is a bad/aggresive-tweaked custom kernel, or UV/OC. An unknown cause of kernel panic happens sometimes during phone charging.
I DON'T RECOMMEND UNDERVOLTING, a lot of phone could not manage that. I had a lot of SoDs because of that.
If I wrote something wrong please correct me.
Inviato dal mio Smartpad810c usando Tapatalk
I haven't had any SOD yet. Use my 2X since last April.
Been on Stock, Modaco Fr19, Gueste v2.2, Gueste v3.1, Gueste v3.2 and am on Temaseks last KANG.
Tried different Kernels as well.
CM7 is highly recommended to be used with BB and RIL 218. Maybe this is the source of your problems.
If your Phone gets this SODs that often, I would revert to stock and return it.
Chances are high, that you will get a newer and bug free specimen.
if you use cm7 kang #69 and with etana kernel, i suggest you change the minimum value to 324 MHZ since it doesn't give me SOD at all. with my pimp my CPU configuration like this:
default: 324-1100MHZ.
idle / screen off: max & min 324 MHZ.
i don't Undervolt since it will give problem with my device. i guess i have the crap one can't undervolt
CM7 is highly recommended to be used with BB and RIL 218. Maybe this is the source of your problems.
Click to expand...
Click to collapse
nah, i use the BB and RIL 0725 SEA
thanks for your advices. will check frequencies at start - then ill will start to mess with BBs and RILs.
I have found that this might be bb related issue soding my phone all the time. With 1120 and 1120 ril my phone is stable. No sods in week. I flashed back to 725 and i had 2 sods in one day. Also i had difficulties to find correct ril as with a lot of 725 rils i did had other problems. For know im using system in my sig and i am quiet happy.
Related
My optimus is on order (best i could get through work!).
The idea is to flash Root - Flash CM7 and have a nice speedy phone
Seems the steps are quite easy
- Root
- Install Rommanager
- Flash CLK recovery
and install a rom the usual way (format - flash zip - go go)
I'm a bit confused atm - seems there are CM7 nightlies which haven't been updated and 2 alternative CM7 versions in the android development subsection.
Was thinking about trying the
temasek's KANG BUILD + CM7 Kang kernel
Looking for vanilla CM7 really - used it on a desire S (got stolen..) and an HD2 (temporary device).
Most of all i'd like ICS but seems the optimus 2x isn't that far yet
There are indeed two cm kangs in the dev section, from Temasek and koboltzz. So you can choose between them. Also, these kangs are far better than the official cm nighties and the latest stable. So, in fact you can choose between the two, or official cm of course.
Sent from my LG-Stone from the Prehistory....
Naaaahh... Just kidding!
CM7.2 Temasek KANG P204-30
Ironkernel (Vadonkas KANG)
You should use the latest Temasek kang imo, these are kangs more up-to-date because the normal CM7-nightlies are not going to be updated anymore. (before ICS)
I have used almost every single rom on XDA on my Optimus 2X, and I must say that the temasek kang (i'm at build 27) + Vadonka's kang kernel is the best combination I have had so far. It's super-smooth, stable and amazingly fast. Compared to the stock LG-firmwares it is a very noticable difference, especially because stock LG-roms have serious memory leak issues which causes huge slowdown after using your phone for a few days without rebooting. (this is very annoying)
CM7 is also much faster with browsing, the stock browser on CM7 is a lot faster than the android browser on LG's roms. (don't know why). Moreover the multi-tasking with latest CM7 kang+vadonka kernel is very good, memory management is excellent.
You should also look at the Baseband (BB) that you have on your O2X. You could update your O2X with LG's updater, which updates to 725 Baseband
You should remember: Cyanogenmod7 (CM7) does not change or flash your baseband. RIL and BB are different, CM7 only contains a RIL, which is a small part of the firmware that can easily be changed by using the Android App GetRil from the market. Most of the time a matching RIL-BB is the best. ( So BB 725 with RIL 725). All CM7 roms contain the RIL 218 so you might need to update your RIL with the GetRil app (1 minute, very easy app)
It's recommended to use baseband 725 with RIL 725 or RIL 218 (both seem to work fine, you should try by yourself)
It seems like you are already experienced enough, to flash your O2X, it's not very difficult.(optional:update to latest LG rom for latest Baseband)
Then: Root(see post on this forum, oneclickroot etc. doesn't work). This method also includes ClockWorkMod recovery, so all you need to do after this is copying the CM7 Kang (+kernel if you want) to your Phone, reboot into recovery and flash.
Both kangs are quite good, and I don´t know if u wanna consider miui, but I like it quite a lot. u might wanna check out vadonka´s o ironkernel with those. the first one has a little more battery life.
No miui for me
Thanks for the information!
Lets hope we get Tegra2 ICS drivers fast! Flashed a beta on my current HD2 and i really like it!
Could only get 1ghz singlecores which do have ICS beta's or this Optimus 2x which has a dualcore and a far more powerfull GPU - lets hope the gamble pays off
sander-m said:
Then: Root(see post on this forum, oneclickroot etc. doesn't work). This method also includes ClockWorkMod recovery, so all you need to do after this is copying the CM7 Kang (+kernel if you want) to your Phone, reboot into recovery and flash.
Click to expand...
Click to collapse
Hello!
Latest version of SuperOneClick should work...
http://shortfuse.org/
But it isn't a big advantage over the linked method as posted by TrymHansen, since he needs to install CWM anyway...
Medizinmann said:
Hello!
Latest version of SuperOneClick should work...
http://shortfuse.org/
But it isn't a big advantage over the linked method as posted by TrymHansen, since he needs to install CWM anyway...
Click to expand...
Click to collapse
Aha sorry, good to know
if you want to use CM7 then you should flash the kang either temasek one or koboltz up to you. since CM7 doesn't release the nightly, maybe they just release straight to CM9 don't know.
but there is still another rom such as miui, and stock rom which is already tweaked and there are many kernels for this phone both for stock and CM and miui
see the development section and happy flashing
I think MIUI ROMs are great!
You should also check out wajk's MIUI ROM. Its really great!
http://forum.xda-developers.com/showthread.php?t=1388502
He got some goodies from CM7 and put it in,
Medizinmann said:
Hello!
Latest version of SuperOneClick should work...
But it isn't a big advantage over the linked method as posted by TrymHansen, since he needs to install CWM anyway...
Click to expand...
Click to collapse
SuperOneclick (latest) worked only kinda for me.
It did in fact root the phone but only until reboot.
It did however give me the chance to install CWM and then CM7.
But if you're using SuperOneClick then it doesn't matter. I mean just install CM7 straight off and then have CM7 flash CWM.
That's how I did it the second time and it felt like the easiest way.
// Stefan
just use any guide, and it should work fine
Hi guys,
Currently i just rooted my phone and successfully install CM7 KANG by Koboltz (sorry if i spell it wrong ) ..many thanks bro for the KANGin... It really smooth and trouble free from my experience using it for 2 weeks now
Now I really want to take my O2X to the next level by try to install custom kernel on it .. and my choice is Vadonka's kernel http://forum.xda-developers.com/show....php?t=1427646
However i always failed to install the recent Update 2012.01.17 .. any version i tried I always got bootloop on CM7 logo...always stuck there and wont go in to the system.
The only Vadonka's kernel i managed to install successfully is LGE-KaNG_120109 its super smooth and stable but i got a bug that i cant play my PES 2012 on it -- PES always stuck on konami logo and then force close.
anybody have the same problem with me ?
Is there any way i cant play PES 2012 on that kernel (LGE-KaNG_120109).. or is there any settings that i need to change ?
And are there any way to know what causing bootloop on Vadonka's newest kernel ? -- maybe is there something i need to do to diagnostic this maybe ?
(yes i did all the clean / wipe stuff before and after installing) but still it bootloop on CM7 logo on newest kernel.
other than that Vadonka has created or KANG one of the best kernel i think for o2x -- at least that is what my friend said
but still thanks to Vadonka
Thanks in advance for any help guys
UPDATE:
I tried Vadonka's latest Update 2012.01.18 but it still give me bootloop on CM7 logo.
I did try to use init remover by Vadonka to remove init script
I did try to disable compcache in CM7 setting
I did wipe cache and dalvik
Still i'm not able to boot
Try temasek's kang (link in signature) maybe this will work.
I see, I will try temasek's KANG... been actually thinking ti change rom but still learning about this rom and kernel stuff.
Thanks for the advice
Sent from my Optimus 2X using XDA App
Installing Vadanko tweaks failed for me aswell :-(. My battery drain is ridiculous (think I'll just have to settle with a spare battery)
I'm running Temasek kang and it is quite good.
Sent from my Optimus 2X using xda premium
Temasek rules!...
I use "CherryPics" Kernel (for CM7/Kang) with it
May be a driver/hardware module that causes your phone to hang and some other versions? (these parts are very "ROM specific" or Kernel inclusions...)
Yes I did try to use Temasek's kang #50 now, but still unable to use Vadonka's latest kernel.
Well on the good side, Temasek's kang #50 is bullet fast and rock stable for me. .. and after applying androidon tweak its just like bullet covered in butter.
I must say many thanks to Temasek, AndroidON and surely CM team and every other coder.
But I still kinda curious to try Vadonka's kernel....hope better luck next time
Sent from my Optimus 2X using XDA App
Hmm... There was a guy who had just the same problem as you, he couldn't boot any kernel versions after 9 January, so maybe you could try this version... Try searching for it at vadonkas thread.
SP1996AC said:
Hmm... There was a guy who had just the same problem as you, he couldn't boot any kernel versions after 9 January, so maybe you could try this version... Try searching for it at vadonkas thread.
Click to expand...
Click to collapse
Vadonka's kernel on 9 January is working fine, but still got several apps wont run on it .. one example is PES 2012, which always freeze and yhen fc.
I see that he is building new kernel (ETaNa).. wonder if this one might work ? I mean is it completely new? Cause I see its said that the installer will recognize something
Sent from my Optimus 2X using XDA App
I don't know if it is completely new, AFAIK, he only give it a new name...
Same issue here, after the jan09 version, i got a bootloop. Etena version same issue.
I would like to ask if I install custom kernel that is released by vadonka (the latest one is 30 Jan). Is there any problem if I flashed hybrid revolution v3.1 with the latest one??
Flewoutthecuckoonut said:
I would like to ask if I install custom kernel that is released by vadonka (the latest one is 30 Jan). Is there any problem if I flashed hybrid revolution v3.1 with the latest one??
Click to expand...
Click to collapse
I'm not sure about this but afaik vadonka made a lot of tweak along with his kernel and that might conflict with tweak in gueste rom .. please correct me if I'm wrong.
I think its better to wait kernel only installer from vadonka or you can try temasek kernel only.
I would like to try gueste 3.1 rom but maube I'll wait for it this weekend.
Sent from my Optimus 2X using XDA App
You can try out IronKrnl . The 32MB version has been stable for me for the last two days . And I have infact patched IronKrnl with Vadonka's init.d AIO tweaks and trying that out now . Vadonka's kernel was fast when I had it on my O2X but I experienced frequent FC's with the phone radio so I reverted back to stock CM7 kernel and patched IronKrnl . Having said that I think Vadonka's kernel is likely to be newer and more optimised if it gets stable
Always take a Nandroid backup of the existing stock & stable image before flashing a new kernel . It saves a lot of a headache . And to flash a totally different kernel I would recommend you to revert to stock and then flash the new kernel . The faster way would be to revert only the boot.img file but that might leave behind some stray settings .
also i have problem with the newest etana kernel by vadonka, it makes the cpu getting hot , and dont know why
Try to flash back prior to installing vadonka's kernel. Apparently there are some issues with his current kernel that I've experienced as well so it's better off with the stock kernel.
Currently I'm stick with Temasek kang #55 and with default kernel. Its been very stable and smooth for a week now, and u don't even have charging BSOD again since I set the screen awake while charging.
Latest Temasek kang #58 is out now, and I have yet to decide if I want to use it or use Gueste 3.1
Anyone tried gueste 3.1 from CM 7 without data wipe? ? ( only cache and dalvik wipe) cause I don't want to install all my programs from scratch. Is it even possible, since gueste 3.1 is also based on CM 7 ?
Sent from my Optimus 2X using XDA App
Hi,
I've been using Gueste 3.2 hybrid revolution for a day now, and i muat admit this is the smoothest rom i ever use in my entire o2x life.
The stock lg launcher is covered with butter. I even try to install go launcher ex, and ita still very smooth like never before.
Then i say many many thanks to Mr. Temasek for his Kang efforts and Mr. Stefan for this smooth rom.
My other experience today is for the pimp my cpu app always ask for super user privilege ... I always set to allow and tick on the remember box ... but it always keep asking.
For that i maybe a noob because i don't know how to sett the proper super user... but no impact on performance whatsoever until now.
Anybody know how to use pimp my cpu ? or atleast make it not keep asking for super user privilege. ?
I'm currently using Temasek Cm 7 kernel + voodoo sound dated 7 feb 2012 .. downloaded from Temasek mediafire.
Thanks in advance
Sent from my Optimus 2X using XDA App
bekaman said:
Vadonka's kernel on 9 January is working fine, but still got several apps wont run on it .. one example is PES 2012, which always freeze and yhen fc.
I see that he is building new kernel (ETaNa).. wonder if this one might work ? I mean is it completely new? Cause I see its said that the installer will recognize something
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Hi everybody!
Has been solved the problem with some apps and the etana kernel??
Thanks
My english is very bad because i´m spanish and i don´t know very well english :S
Hi elmenda,
I don't have any problems with my current setup (check the sig)! I haven't tried PES2012 though.
Bienvenido
Thats is very strange because I've got Etana_Hoc_lite_otf kernel and is impossible to install any pirate apps
I'm not the only who has these problem, because i've read the same error in other thread
Enviado desde mi Optimus 2X usando Tapatalk
Since i've been on CM7 with Temasek's kang i've been using Etana kernel. I've found myself wanting to play Plants vs Zombies and Draw Something among other games.
Are there any CM7 kernels that can play those games properly perhaps with ramhack and power saving tweaks enabled? Does Temasek's CM7 kernel kang play those games or does everyone stick with stock kernel?
I'm on cm7's stock kernel. And I can play PVZ fine.
I suggest you try stock.
----------
Sent from my Optimus 2X
Yeah i'm using it and it works fine. Does temasek's kang kernel work too? I might add Voodoo sound as something i'm after.
Sent from my Optimus 2X using XDA
I tested temasek's kernel kang PvZ and draw something work there. Also got Voodoo on it . I'm still interested in something with ramhack or power saving if the other things i'm after work. If someone could recommend would be appreciated
Sent from my Optimus 2X using XDA
New Etana Kernel Versions have some issues with the r/w permissions in /system
PvZ, Shadowgun, Tapsonic, all good with cm7 stock kernel.
Sent from Hogwarts using my Tapatalk Owl named Optimus2x
Yea i'm sticking with temasek's kanged kernel. I tried ironkrnl and imperticus which the latter has no ramhack and still can't play those games.
Sent from my Optimus 2X using XDA
Can't flash last Vadonka's
Hi everyone,
I believe Etana v3.0.y (OC version) is absolutely the best kernel for CM7 I've tried so far.
But today... I just couldn't flash the last version (15 APR)!!
The process stopped saying that my ROM was unsupported. I'm on Temasek's last kang (89) and I just don't believe that all of a sudden this rom is not supported anymore...
Can anyone give me an advice about this trouble ? What's happening?
Thanks in advance
Nicola
I had that come up trying to change kernels. I think it has to do with the system not writable on the current 3.0 kernels. It wouldn't even let me format system in CWM but flashing temaseks kang would then let me format system. Also reflash temaseks kang after formatting system as well as gapps.
Infy_AsiX said:
I had that come up trying to change kernels. I think it has to do with the system not writable on the current 3.0 kernels. It wouldn't even let me format system in CWM but flashing temaseks kang would then let me format system. Also reflash temaseks kang after formatting system as well as gapps.
Click to expand...
Click to collapse
Ok, so do you think I have to reflash the kang and then try to reflash the kernel ?
I really don't want to format the system; if it's not possible, I think I will stay with the 12 apr. version as long as Vadonka will fix the trouble: by the way It's not that bad ...
Yeah you don't need to format system. I read you need to when changing kernels because some change it. Since your upgrading it won't affect you.
Sent from my Optimus 2X using XDA
Infy_AsiX said:
Yeah you don't need to format system. I read you need to when changing kernels because some change it. Since your upgrading it won't affect you.
Sent from my Optimus 2X using XDA
Click to expand...
Click to collapse
Thank you so much. It worked for me.
Etana .32 for stability.
And if you want new experiments, you can use etana 3.0/ imperticus 3.0 kernels
Sent from my LG-P990 using Tapatalk
Hi folks,
Running CM7.2 on my phone but I need some advice on a good kernel to use with it.
I installed 2.6.32.59-ETaNa_LOC_LITE_OTF this afternoon but it has made me phone awful to use.
From standby the screen takes ages to switch on... so long that I think I mispressed the button so press it again so by the time it comes on, it switches straight back off again.
Also the phone is very sluggish to use.
Sometimes it won't even come out of sleep at all and I have to pull the battery...
Can anyone suggest another kernel that I could try please?
Just use the cm7 kernal. If you want voodoo sound look in temaseks unofficial builds.
The standard kernal is very stable...
Sent from my Optimus 2X using XDA
Ironkernel was a good alternative but I don't know if is regulary updated you can check setiron g+ page
Sent from my Optimus 2X using Tapatalk 2
Probably there is something wrong in your rom..unfortunately etana is the kernel updated most frequentely than the others..at this point you can use the cm7 kernel, swiftextreme or ironkernel but they are very old respect etana..have you tried the v3?
This is another vote for the stock kernel. If you want to see if you can make it faster, you can try the snappy mod. It's inside Temasek's mediafire folder.
my P990 with MIUI 2.4.13 with out any problem. When I flash the CM 7.2.0 stable (wiped data and cache), everything is good and very fast ( i really love the speed of CM ), it can't wakeup..........
Sorry for my bad English and could anyone please tell me what problem and how to solve? Many Thanks.
manshum said:
my P990 with MIUI 2.4.13 with out any problem. When I flash the CM 7.2.0 stable (wiped data and cache), everything is good and very fast ( i really love the speed of CM ), it can't wakeup..........
Sorry for my bad English and could anyone please tell me what problem and how to solve? Many Thanks.
Click to expand...
Click to collapse
In cm settings - performance raise the min frequency from 216 to 316 or 324 mhz.
Maybe this will help you.
Sent from my LG-P990 using XDA
Well if you are using the oficial CM7.2 Stable, unfortunatly you cannot edit the CPU governors nor u can OC/UV.
Maybe reinstall the CM7.2 Stable with full wipe (dalvik included) don't forget BACKUP before anything else
I.m.Tuga said:
Well if you are using the oficial CM7.2 Stable, unfortunatly you cannot edit the CPU governors nor u can OC/UV.
Maybe reinstall the CM7.2 Stable with full wipe (dalvik included) don't forget BACKUP before anything else
Click to expand...
Click to collapse
im using cm 7.2 stable and i was able to change the min frequency to 300 mhz using antutu cpu master
lopiop said:
im using cm 7.2 stable and i was able to change the min frequency to 300 mhz using antutu cpu master
Click to expand...
Click to collapse
Indeed you are right! didn't thought about Antutu!!
Neither way i would try to reflash....
that issue is not normal, if you like good batery performances like me than increasing minimum CPU frequencys is not the way to go....just sayin'
thx for all reply
I try a full wipe with wipe dalvik, reflash the cm and set the min cpu speed to 456 but no luck... my P990 still sleep of dead...
manshum said:
thx for all reply
I try a full wipe with wipe dalvik, reflash the cm and set the min cpu speed to 456 but no luck... my P990 still sleep of dead...
Click to expand...
Click to collapse
i suggest u send ur phone to lg if its still in warranty or maybe go back to stock rom
same here
i had this too. but only one time and without doing anything it is gone
I.m.Tuga said:
Well if you are using the oficial CM7.2 Stable, unfortunatly you cannot edit the CPU governors nor u can OC/UV.
Maybe reinstall the CM7.2 Stable with full wipe (dalvik included) don't forget BACKUP before anything else
Click to expand...
Click to collapse
I'm not using cm7 anymore but are you sure?
If I remember correctly then it was possible to raise values. It's just not possible to overclock with the default kernel.
@op: try the Etana 2.6 kernel from vadonka. Maybe it will work better on your phone, worth a try.
If it's still problematic you could try to give each mhz step +25mV.
Sent from my LG-P990 using XDA
I can't find the old ETaNa 2.6 kernel so I flash the latest ETaNa v3.0.35 OTF-OC-1504MHz kernel with CM7.2 but my P990 still sleep of dead.
after the try of flash CM7.2, I try to flash the MIUI 2.4.6 (kernel 2.6.32-45), it work and no sleep of dead and than I flash the ETaNa v.3.0.35 kernel, it sleep of dead again......
anyway, Many Thanks of all help on me. I think my P990 need to stick on MIUI and wait for CM9 with video acceleration ( i need PPSteam )
updated: I flashed this two rom "[ROM] Rebuild of V20S Gingerbread Update + Tweak Pack V1.1" (kernel 2.6.32) and "[ROM][CM9][JUN14-Build78] Dominationand", the P990 sleep of dead, only MIUI not sleep of dead on my device.... what MIUI do something on my P990?.... so funny...
manshum said:
I can't find the old ETaNa 2.6 kernel so I flash the latest ETaNa v3.0.35 OTF-OC-1504MHz kernel with CM7.2 but my P990 still sleep of dead.
after the try of flash CM7.2, I try to flash the MIUI 2.4.6 (kernel 2.6.32-45), it work and no sleep of dead and than I flash the ETaNa v.3.0.35 kernel, it sleep of dead again......
anyway, Many Thanks of all help on me. I think my P990 need to stick on MIUI and wait for CM9 with video acceleration ( i need PPSteam )
updated: I flashed this two rom "[ROM] Rebuild of V20S Gingerbread Update + Tweak Pack V1.1" (kernel 2.6.32) and "[ROM][CM9][JUN14-Build78] Dominationand", the P990 sleep of dead, only MIUI not sleep of dead on my device.... what MIUI do something on my P990?.... so funny...
Click to expand...
Click to collapse
It's here: http://etana.donka.hu/?dir=kernel/2.6.32.y
Vadonka has the 2.6 kernel in the third post of his thread.
I would recommend the 1204021107-ETaNa_LOC_LITE_OTF.zip one.
As I said a +25mV could help you, if the bsods are voltage related.
i flash the 1204021107-ETaNa_LOC_LITE_OTF.zip and try to add the voltage but the antutu just let me -25mV ( can't +25mV)... anyway, same result, my P990 still sleep of dead :silly:
after clean install the MIUI, it run so fast, so i will stik with MIUI and wait the official LG android 4.0 release ( maybe next next next ... years )
Many Thanks
manshum said:
i flash the 1204021107-ETaNa_LOC_LITE_OTF.zip and try to add the voltage but the antutu just let me -25mV ( can't +25mV)... anyway, same result, my P990 still sleep of dead :silly:
after clean install the MIUI, it run so fast, so i will stik with MIUI and wait the official LG android 4.0 release ( maybe next next next ... years )
Many Thanks
Click to expand...
Click to collapse
System Tuner from the market can +mV
Sent from my LG-P990 using XDA
I try to flash the V20F KDZ and the P990 still sleep of dead...
finally, i take my P990 to LG service center and the engineer replace the main board ( the phone warranty will expire on 17 July, very lucky )
now the P990 with V20F stock rom so far so good
Many Thanks again for all