My desktop LAN and wifi are different network. My office network is 192.168.1.x and wifi router WAN IP is 192.168.1.254 and wifi router LAN network is 192.168.15.x
My Note connects to wifi router and gets 192.168.15.2. I got wifi router configured to give static DHCP IP to my phone and it always gets 192.168.15.2. I then added port mapping to forward TCP port 8080 to this IP.
So when I run Kies Air, it displays URL http://192.168.15.2:8080
and from my desktop I type http://192.168.1.254:8080 and IT DOES NOT WORK. As soon as I hit go, URL gets forwarded to http://192.168.1.254:8080/www/index.html (blank screen) which means browser did reach Kies Air service but then nothing goes further.
I had done similar port mapping with other similar kind of apps (AirDroid, LazyDroid App Desktop, Motorola's similar app) and it always used to work.
Laptops in the same n/w (i.e., 15.x) are able to connect to Kies Air without any issue. My wifi router is DLink DIR 655. Any clues?
disable DHCP from your wifi router and let all devices get their IP from your original router. that way, you will be in the same IP range.
Thanks for the reply. Yes that is one solution to set wifi router in AP mode. But problem is we don't have master dhcp server leasing out 198.168.1.x IPs. All desktop are given static IP and there is firewall deciding who is given access to where and to do what.
Sent from GNote.
Related
I heard that you can access you Linksys router using your phone as long as you are connected to you wireless network and have web access. I have been unable to get this to work... Any ideas anyone?
Same way you would for anything, has nothing to do with the Tilt... If you're doing it from the internet, you have to turn on something which is likely called "Remote Administration" or something similar and access your internet IP address in a browser.
From the wireless network itself, just go to the router's IP address in your browser.
if you are at home and connected to your router via wi-fi just open your browser and in the address bar type in 192.168.1.1 (usually the default address for linksys router, otherwise look up correct address for your model). you will be prompted for user ID and password default admin:admin. this is the same way you access your router from your PC. it is also possible to access your wireless router at home when you are away by just using media net (or whoever your carrier is' data connection.) just like khaytsus says, you need to first turn on remote access while connected to your router from home.
Hi this is my first time on a site and I just wonder if anybody can solve my problem!
I,ve read a few posts and set my xda llI so that in connections my network card connects to work!Also have done all the rest and set it to internet just in case as well
My Isp in connections window is on the advanced tab and select networks on the network Management is set to My Isp.
my Wirles Lan Manager is status connected to network
My ssid is the one that all the house computors are set to,my mode is Infratructure and Tx is Auto.My channel is 6
my bssid is 00-18-2D etc etc.
My Mac is 00-09- etc ,etc.
My IP.169.254.168.73
signal quality is good
I,ve been onto the 192.168.0.1 website and added the mac address of the xda lli but when I try to get the internet on the xdalli to connect it justs says default page. I cannot seem to connect. is this normal or do I have to go through O2 to pay for another internet connection besides my home address one.Have I missed something out!Help would be greatly appreciated! thanks
Nilocsss
Hi,
Your IP of 169.x.x.x means that you are trying to use DHCP to get an ip address but haven't been supplied one by your router..
The ip addres of your router is 192.168.0.1, so it may be sensible to setup your router to allow a dynamic address range of 192.168.0.100 to 192.168.0.110 (say) - when anyone tries to connect using a dynamic address (using dhcp), they'll be given an address in this range.
So, initially check if DHCP is enabled.
Do you have a laptop that connects using a dynamic ip address (ie not static - ie not implicitly defined) - if so then DHCP _is_ already working and there's another problem.
If this is the case, I'd initially disable any kind of mac-filtering or security until you get a simple connection going..
Sorry, if this isn't too clear - I'm tired - what router are you using?
Kev
First hand it can depend on your router
I have had problems connecting with Virgin broadband routers for instance.
Have you tried connecting elsewhere?
Also what type of security do you have on your router?
One more thing to try
Check under the "Network Cards" settings when disconnected and select "the internet" from the drop down menu.
Hope this helps
clearing the way so that I understand correctly!
kevcal said:
Hi,
Your IP of 169.x.x.x means that you are trying to use DHCP to get an ip address but haven't been supplied one by your router..
The ip addres of your router is 192.168.0.1, so it may be sensible to setup your router to allow a dynamic address range of 192.168.0.100 to 192.168.0.110 (say) - when anyone tries to connect using a dynamic address (using dhcp), they'll be given an address in this range.
So, initially check if DHCP is enabled.
Do you have a laptop that connects using a dynamic ip address (ie not static - ie not implicitly defined) - if so then DHCP _is_ already working and there's another problem.
If this is the case, I'd initially disable any kind of mac-filtering or security until you get a simple connection going..
Sorry, if this isn't too clear - I'm tired - what router are you using?
Kev
Click to expand...
Click to collapse
Thanks Kev!
My router is a netgear dg834GT.I,ve looked at the range and the range for 192.168.0.1 actually goes from 192.168.0.2 upto 192.168.0.254 so the range should be there. how would I know if the router is DHCP, is there a way of seeing this? The filter would be set up where for the mac address?Is there a way of changing the isp on the phone so that its range is within the 192.168.0.1 range?the only security that I have is the routers own and the avg antivirus.would disabling the avg help!
thanks for your response!
voxshots said:
First hand it can depend on your router
I have had problems connecting with Virgin broadband routers for instance.
Have you tried connecting elsewhere?
Also what type of security do you have on your router?
One more thing to try
Check under the "Network Cards" settings when disconnected and select "the internet" from the drop down menu.
Hope this helps
Click to expand...
Click to collapse
thanks for replying ,my router is a netgear and the security is a wep key which I have disabled and i also tried the drop down menu "the internet" but still nothing! how would I find out on the phone what ethernet card it is running so that I can connect to that .
nilocsss said:
Thanks Kev!
My router is a netgear dg834GT.I,ve looked at the range and the range for 192.168.0.1 actually goes from 192.168.0.2 upto 192.168.0.254 so the range should be there. how would I know if the router is DHCP, is there a way of seeing this? The filter would be set up where for the mac address?Is there a way of changing the isp on the phone so that its range is within the 192.168.0.1 range?the only security that I have is the routers own and the avg antivirus.would disabling the avg help!
Click to expand...
Click to collapse
If you haven't set up mac filtering, then it won't be a problem.. if you have, then there should be an option to disable/remove any you've input - build security up from a working setup.
Have you (can you borrow) a laptop that you can setup wireless with a dynamic ip address and check that connects; if that's okay then the router is setup correctly.
So I the Alpine comes up with "connected to network" but the ip address is 169.x.x.x ..
This means that the Alpine has not been allocated a usable ip-address by the router for some reason and you'll get nowhere until this happens.
Your other PCs.. are they set to dynamic ip addresses - I guess so as you have no room for static addresses. You should probably check they're all dynamic as if (say) you've allocated a static ip address of 192.168.0.2 to one of them and then DHCP tries auto-allocating addresses, I guess there could be a conflict (don't know how clever dhcp is). Usually I would set the DHCP range to 192.168.0.100 -> 192.168.0.200 (allowing 100 different dynamic addresses).
Have you checked that authentication is set top 'Open' and Data Encryption 'Disabled' on the Alpine; and ensure you've disabled (temporarily) all router security..?
Kev
kevcal said:
If you haven't set up mac filtering, then it won't be a problem.. if you have, then there should be an option to disable/remove any you've input - build security up from a working setup.
Have you (can you borrow) a laptop that you can setup wireless with a dynamic ip address and check that connects; if that's okay then the router is setup correctly.
So I the Alpine comes up with "connected to network" but the ip address is 169.x.x.x ..
This means that the Alpine has not been allocated a usable ip-address by the router for some reason and you'll get nowhere until this happens.
Your other PCs.. are they set to dynamic ip addresses - I guess so as you have no room for static addresses. You should probably check they're all dynamic as if (say) you've allocated a static ip address of 192.168.0.2 to one of them and then DHCP tries auto-allocating addresses, I guess there could be a conflict (don't know how clever dhcp is). Usually I would set the DHCP range to 192.168.0.100 -> 192.168.0.200 (allowing 100 different dynamic addresses).
Have you checked that authentication is set top 'Open' and Data Encryption 'Disabled' on the Alpine; and ensure you've disabled (temporarily) all router security..?
Kev
Click to expand...
Click to collapse
Thanks kev for replying.
I have a hard wired lead to the router for one computor and 3 laptops connected by wifi and another computor connected by wifi.
the range or should I say the ip addresses are 192.168.0.3,192.168.0.4
upto 192.168.07.I,m at work at the moment but as soon as I get home tonight I'll set the wep key to disabled is there any other thing on the router that I need to do?
Can't think of anything else...
But at least you know DHCP is working if the other PCs are getting ip addresses okay.
And you know the wireless is working...
So it does look likely that it will be something to do with WEP/WPA encryption... (I guess you've got it setup at home), hence why the router isn't allocating you an ip-address.
If you can't get it going, it may be worthwhile doing some sceenshots of the router configuration pages (or config files)...
What I can tell you is that what you are doing looks correct and you have everything setup so you can go on the internet whilst at home using the Alpine. Mine uses the router whilst at home and GPRS whilst out.
nilocsss said:
Thanks Kev!
My router is a netgear dg834GT.I,ve looked at the range and the range for 192.168.0.1 actually goes from 192.168.0.2 upto 192.168.0.254 so the range should be there. how would I know if the router is DHCP, is there a way of seeing this? The filter would be set up where for the mac address?Is there a way of changing the isp on the phone so that its range is within the 192.168.0.1 range?the only security that I have is the routers own and the avg antivirus.would disabling the avg help!
Click to expand...
Click to collapse
The dg834GT is pretty much the one that Virgin use, like I said in my earlier post.
I have found these particular routers to be a problem (sometimes) with my Alpine.
You should try to update the firmware.
kevcal said:
Can't think of anything else...
But at least you know DHCP is working if the other PCs are getting ip addresses okay.
And you know the wireless is working...
So it does look likely that it will be something to do with WEP/WPA encryption... (I guess you've got it setup at home), hence why the router isn't allocating you an ip-address.
If you can't get it going, it may be worthwhile doing some sceenshots of the router configuration pages (or config files)...
What I can tell you is that what you are doing looks correct and you have everything setup so you can go on the internet whilst at home using the Alpine. Mine uses the router whilst at home and GPRS whilst out.
Click to expand...
Click to collapse
Well Done Kev!
It was the "open"on the phone and putting "open" on the router.I had to intiallely disable the wep key.then when I got connected,I reactivated the WEP key and I could not connect.So on the phone I unticked the automatically connect to my name of my router name and reput in my encryption key again and I was in and On line.Thanks to both of you(Kevcal and Voxshots) for helping me.Definately could not have done it without you Pair.I like the idea of using the screenshots so I,ll post a screenshot of all the settings on the phone and computor so that anybody else will be able to resolve there problems with all credits going to you people on the bottom!
Very happy to have helped and glad you sorted it out
Hi,
I have an interesting problem. I am in Dubai, where the ISP (Etisalat) provides Internet via Fiber-optic cables to my residence. They have this modem which I connect my wi-fi router to.
After connecting to my wi-fi router the usual way, I have to dial-in via a Broadband PPPoE connection, where I provide the ISP username and password. I have to do this every time I connect to the Internet.
Unfortunately, this means I cannot connect my Nexus One to the Internet This is because I am not aware of any app/functionality that enables PPPoE dialing on Android.
I had installed Connectify for Windows 7 that enabled me to share my authenticated Internet connection with other devices (and hence my N1). However, after FR83, this seems to have stopped working as well, for some reason. It is extremely difficult to connect to the shared Wifi created by Connectify, and even after connecting, I cannot browse the Internet.
I have already tried setting a static IP address for the N1, but this did not resolve the issue.
Can anybody offer guidance, ideas? Any help would be much appreciated!
Cheers,
PI
Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.
Thanks, but I wouldn't want to spend more money...
lorin.bute said:
Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.
Click to expand...
Click to collapse
Thanks, but I wouldn't want to spend more money on another router. I have a Wi-fi router already, but I don't know if it has the ability to connect via PPPoE. It's a 3COM 3CRWDR200A-75.
Will try and research if I can enable PPPoE via this somehow.
Cheers,
PI
Protocol Set: Dynamic and static IP addressing, DHCP Server, NAT/PAT (with TCP and UDP), PPTP/PPPoE, CHAP, IPCP, SNTP.
http://www.3com.com/products/en_US/detail.jsp?tab=prodspec&sku=3CRWDR200A-75&pathtype=purchase
There you go.
Set your current router to connect through pppoe and you are ready.
Good luck.
droid does
https://market.android.com/details?id=com.cnddu.wifipppoe&feature=search_result
I believe ur wifi "router" is only a wifi access point...
just download wifi pppoe
elgarteo95 said:
I believe ur wifi "router" is only a wifi access point...
Click to expand...
Click to collapse
More accurately, it is a router that happens to have a wireless interface. Most home wireless routers usually have the functionality of a switch as well (that is, providing multiple connections to the same local network), but they usually include routing capability to move traffic from your local area network to the Internet.
Hi guys. I have not access to market because of my region. Can any body get me the WIFI PPPoE ?
wifi pppoe doesnt work for me
hi everyone,i bought HD7 last night and i have a problem with wifi.i want to connect my HD7 to my wireless routher. i must to set my HD7 IP.i can see HD7 IP but i cant change it.how can i do it? thanks
There is currently no way to set a Static IP address in Windows Phone 7, you'll have to wait for an update to come out that allows this.
not_in_love_en said:
hi everyone,i bought HD7 last night and i have a problem with wifi.i want to connect my HD7 to my wireless routher. i must to set my HD7 IP.i can see HD7 IP but i cant change it.how can i do it? thanks
Click to expand...
Click to collapse
You shouldn't need to manually configure your IP for the phone, the router will most likely assign your phone one if your DHCP is enabled (default on most routers). If you are wanting to connect it to your current home network and you have a wireless router, first you will need to go into the router configuration and set it to broadcast your SSID (if not already enabled). At this time the HD7 cannot connect to hidden networks (I don't see a point in hiding your SSID anyway, use better encryption, and a strong password with numbers, letters[upper and lower case], and symbols[if supported]). You can then use you HD7 to connect to your home network, once connected to your network go back into the router and look at your network. It should list all the devices currently connected to the network along with their currently assigned IP addresses. If you really need to, now that you know what IP address your router has assigned to your phone you can set your router to give your phone a static IP but really as long as you leave the router broadcasting the SSID your phone should have no problem connecting to the WiFi it should save the key and SSID, and it will get a new IP at regular intervals.
You shouldn't need to manually configure your IP for the phone, the router will most likely assign your phone one if your DHCP is enabled (default on most routers). If you are wanting to connect it to your current home network and you have a wireless router, first you will need to go into the router configuration and set it to broadcast your SSID (if not already enabled). At this time the HD7 cannot connect to hidden networks (I don't see a point in hiding your SSID anyway, use better encryption, and a strong password with numbers, letters[upper and lower case], and symbols[if supported]). You can then use you HD7 to connect to your home network, once connected to your network go back into the router and look at your network. It should list all the devices currently connected to the network along with their currently assigned IP addresses. If you really need to, now that you know what IP address your router has assigned to your phone you can set your router to give your phone a static IP but really as long as you leave the router broadcasting the SSID your phone should have no problem connecting to the WiFi it should save the key and SSID, and it will get a new IP at regular intervals.
Click to expand...
Click to collapse
i have an adsl modem that connect to pc through the router,my modem has an IP and my router has another one,my phone get the router IP for Gateway,so i cant reach Internet in my phone,i need to change gateway of my phone to reach to internet and i dont know how to do that
Work WiFi... Our company uses a static IP. Well I can not get my phone to connect to the internet. The phone will connect to the router. It will obtain an IP but it will not connect to the internet. I've gone in changed settings in the phone to static IP.. used the DNS in the router as well as Google DNS and still no luck.. ios devices hook up to this router just fine after changing their static IP settings.. Any thoughts??
Whether you get an internet connection or not - assuming you're using the right password, encryption, mask, etc., is up to the settings in he router. Ask the network admin to set your phone's IP address and MAC address to get a full connection.