Related
Hey guys
So I am currently running 2.3.3 on my N1. I manually flashed the update from Here. I used the "Modified GRI40".
So after update, I noticed that my adfree wasn't working. Running the app, it tells me my host file is up to date. However, no ads are being blocked. Same after uninstalling and re-installing the app. So then I decided to try to copy the host file over manually using adb.
I run adb and get root prompt. Then I mount /system as rw using
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
It appears to work. So then I try copying the host file to /system/etc using
Code:
cp hosts /system/etc
Then I get the following error.
"write error: No space left on device"
But i do, over 30mb of free space.
So I don't know what the issue is. Im thinking that maybe /system isn't being mounted as RW so it is giving the error??
Any help would be much appreciated.
Thanks!
Did you check the /system free space, or /data?
Try doing a df -h from the terminal to verify that you do, indeed, have free space on /system as well as /data, as Jack_R1 mentioned.
codesplice said:
Try doing a df -h from the terminal to verify that you do, indeed, have free space on /system as well as /data, as Jack_R1 mentioned.
Click to expand...
Click to collapse
Well looks like somehow I don't have any space left. I went to go download a terminal application from the market but it errored saying no space left.
So now I can't even install new apps.
However, under settings->storage it says I have 28MB of free space left.
Any ideas?
Sent from my Nexus One using XDA App
Reboot, wipe Dalvik cache.
Go to Manage Applications, clear browser cache.
If it restores you some space - great, proceed with what codesplice suggested above.
If it doesn't - backup, wipe and reflash.
If no backup installed - you're out of luck.
Since you seem to have adb functioning, you can run adb shell df -h to get a readout of your available space on your different file systems. This could help troubleshoot the issue.
Additionally, rather than doing a long manual "mount" command, you could simply do an adb remount to automagically remount all file systems in read/write mode.
The indication under Settings --> Storage indicates free space on /data, I believe, and gives no indication of /system (where you're trying to copy the hosts file).
Another thought (sorry this isn't really coherent at this point...): What if you were to remove your default hosts file and then push the new one?
Code:
> adb remount
Remount succeeded
> adb shell rm /system/etc/hosts
> adb push hosts /system/etc/hosts
> adb shell chmod 644 /system/etc/hosts
codesplice said:
Another thought (sorry this isn't really coherent at this point...): What if you were to remove your default hosts file and then push the new one?
Code:
> adb remount
Remount succeeded
> adb shell rm /system/etc/hosts
> adb push hosts /system/etc/hosts
> adb shell chmod 644 /system/etc/hosts
Click to expand...
Click to collapse
Well that's thing, that is why I started this thread because I was trying to use ADB to push a new hosts file but got the no space error. So I already tried that.
Sent from my Nexus One using XDA App
I was asking if you had specifically tried removing the old one and replacing it rather than just overwriting.
Oh I see what you mean. But no I have not, let me give it a shot.
**Nope didn't work. I still got the same error, no space left on device.
Have you had the opportunity to do adb shell df -h yet?
codesplice said:
Since you seem to have adb functioning, you can run adb shell df -h to get a readout of your available space on your different file systems. This could help troubleshoot the issue.
Additionally, rather than doing a long manual "mount" command, you could simply do an adb remount to automagically remount all file systems in read/write mode.
The indication under Settings --> Storage indicates free space on /data, I believe, and gives no indication of /system (where you're trying to copy the hosts file).
Another thought (sorry this isn't really coherent at this point...): What if you were to remove your default hosts file and then push the new one?
Code:
> adb remount
Remount succeeded
> adb shell rm /system/etc/hosts
> adb push hosts /system/etc/hosts
> adb shell chmod 644 /system/etc/hosts
Click to expand...
Click to collapse
No to hijack this thread, but I just wanted to ask, does "adb remount" require root?
Brownbay said:
No to hijack this thread, but I just wanted to ask, does "adb remount" require root?
Click to expand...
Click to collapse
yes, without root access to the filesystem, adb remount will fail.
So when I try adb shell df -h, I get:
"-h: No such filesystem or directory"
You don't have busybox. Try running "adb shell df", maybe it'll still give some info.
Ok when I ran adb shell df I got a listing of filesystems. /system says size 145M and used 145M. So apparently it is full.
How could that be though?
It could be that you have some bad blocks on your /system partition (you can generally only check by doing a wipe operation in recovery and then viewing the log). These bad blocks could take up space that would otherwise store your system data, and could push you over capacity.
Or you could just have some extra bloat related to that ROM. You could drive to remove some of the applications on /system that you don't have use for (the Amazon MP3 thing, for instance). I'd suggest using Titanium Backup to do this, but you can also do it by manually using the adb shell.
Alternatively, a full wipe and clean reinstall may help make sure you don't have anything left over taking up space.
I'm thinking about just flashing a new ROM altogether as I am also having issues with the battery. Under usage, Android OS now shows somewhere around 35% of the usage. This only started happening after updating to 2.3.3.
I've always ran stock ROMs, so I haven't played with any of the custom ROMs out there. Are there any ROMs you recommend for a first timer?
*Sidenote* So a nandroid backup is a complete backup of the system state correct?
So after flashing a ROM, I can just restore the nandroid backup and my phone will be exactly as it was with the old ROM and user data?
decoyjoe said:
I'm thinking about just flashing a new ROM altogether as I am also having issues with the battery. Under usage, Android OS now shows somewhere around 35% of the usage. This only started happening after updating to 2.3.3.
I've always ran stock ROMs, so I haven't played with any of the custom ROMs out there. Are there any ROMs you recommend for a first timer?
*Sidenote* So a nandroid backup is a complete backup of the system state correct?
So after flashing a ROM, I can just restore the nandroid backup and my phone will be exactly as it was with the old ROM and user data?
Click to expand...
Click to collapse
I've been really impressed with the Kang-o-rama ROMs. Basically prettied-up versions of Cyanogen. The latest release is a beta based on CM7, so still has a few issues. The prior release (KOR 1.1Final) is still quite solid.
And yes, a nandroid backup creates a copy of your current disk image, which can then be restored at any time to revert back to a previously-working configuration (great for when you break stuff!).
decoyjoe said:
I'm thinking about just flashing a new ROM altogether as I am also having issues with the battery. Under usage, Android OS now shows somewhere around 35% of the usage. This only started happening after updating to 2.3.3.
I've always ran stock ROMs, so I haven't played with any of the custom ROMs out there. Are there any ROMs you recommend for a first timer?
*Sidenote* So a nandroid backup is a complete backup of the system state correct?
So after flashing a ROM, I can just restore the nandroid backup and my phone will be exactly as it was with the old ROM and user data?
Click to expand...
Click to collapse
Exactly Remember to wipe before restoring
Oh and that brings up another thought.
So if before I flash a new ROM, I do a Titanium Backup and then flash the ROM...
Would I then be able to restore that Titanium Backup made on the previous stock ROM to restore all my apps and user data?
I have been experimenting with my new droid/milestone the past couple of days, odd problems which I am past now but still curious about.
Firstly after flashing the 2.1 sbf with rsd it will autoboot and screen slider will be there, then when I reboot, screen slider will be missing. This only happend when I flashed an sbf from the sbf site(2.1 uk version, not service), doing a factory reset didn't have any problem -could reboot as many times and slider would be there.... then suddenly after factory boot it would dissapear after first boot. Anyway solved this problem by installing screen mode widget after first boot after flash, solved problem, but still weird. Fixed this now but still curious about it.
Next, nandroid backup is missing from recovery menu, I have rooted and can execute root commands after typing "su" via Android Terminal emulator, so pretty sure is rooted. So why no nandroid? I thought I could do nandroid backup after rooting.
Next busybox won't install, tried the app, did the "searching system" for over an hour(not exagerrating), eventually gave up and uninstalled.
Trying to do a "manual busybox install" now, using this guide:
Busybox How-to? - Android Forums
Can't execute commands via usb/adb in recovery mode as the other guy suggested so been trying these commands both with terminal emulator on phone, and usb-debugging mode with windows shell. Using these I can go "su" and type "ls" to see files on my droid phone....but when I try to "mount /system" or /sdcard from windows I just get a print about mount options, when I try to "cat /sdcard/busybox > /system/xbin/busybox" I get a "file is read only" error.
I would like advice on how to install busybox, I would like to do it manually(because the app seems to not work for me, remember I waited over an hour while it "searched") and I want to learn to manually do stuff anyway. I tried to chmod /system/xbin too, but that didn't seem to change it from read only.
Also any thoughts on why nandroid backup is missing from my recovery menu even though my droid is rooted. I thought it was meant to appear.
I am still learning and researching, and appreciate any links or tips.
droidtech1 said:
Next, nandroid backup is missing from recovery menu, I have rooted and can execute root commands after typing "su" via Android Terminal emulator, so pretty sure is rooted. So why no nandroid? I thought I could do nandroid backup after rooting.
Click to expand...
Click to collapse
This is odd. Which OpenRecovery did you install? Androidiani? GOT? Or the "original" OpenRecovery? Are you aware, that you come into OpenRecovery by starting Recovery Mode and apply update.zip?
droidtech1 said:
Next busybox won't install, tried the app, did the "searching system" for over an hour(not exagerrating), eventually gave up and uninstalled.
Trying to do a "manual busybox install" now, using this guide:
Busybox How-to? - Android Forums
Click to expand...
Click to collapse
Using the app from the market worked like a charm for me. No idea, what might have gone wrong for you...
droidtech1 said:
Can't execute commands via usb/adb in recovery mode as the other guy suggested so been trying these commands both with terminal emulator on phone, and usb-debugging mode with windows shell. Using these I can go "su" and type "ls" to see files on my droid phone....but when I try to "mount /system" or /sdcard from windows I just get a print about mount options, when I try to "cat /sdcard/busybox > /system/xbin/busybox" I get a "file is read only" error.
Click to expand...
Click to collapse
For remounting, try "mount -o rw,remount /dev/block/mtdblock6 /system" and for undoing this, use "ro" instead of "rw".
droidtech1 said:
I would like advice on how to install busybox, I would like to do it manually(because the app seems to not work for me, remember I waited over an hour while it "searched") and I want to learn to manually do stuff anyway. I tried to chmod /system/xbin too, but that didn't seem to change it from read only.
Click to expand...
Click to collapse
You should download busybox and put the "busybox"-file in the directory /sdcard. After that do:
Code:
# su
# mount -o rw,remount /dev/block/mtdblock6 /system
# cp /sdcard/busybox /system/xbin
# cd /system/xbin
# chmod 755 busybox
# ./busybox --install
# mount -o ro,remount /dev/block/mtdblock6 /system
One thought at the end: How did you root?
I rooted by flashing "vunerable recovery" using RSD lite, copied milestone-root.zip to sd card, renamed it update.zip, rebooted into recovery mode, flashed update.zip from there.
I didn't realise I had to install something like open recovery, think because I remember not having to do that on my pulse? Anyway will try and install one of those now.
Thanks those commands at the end helped, actually managed to copy busybox to /system/xbin, however the 2nd last one "./busybox --install" gave me a load of errors -all being no such file or directory, for example "/usr/bin/wc: no such file"
about 30 of those path errors. Maybe the command path "./busybox" needs to be something else?
ah, okay. sorry, I thought you already installed an openrecovery. for many cool features you will need it (e.g. nandroid, for overclocking it's not a must but a nice-to-have). please don't use GOT, it's rather old already. androidiani is okay, I think.
I think your previous attempts to install busybox via the app etc. mixed up some internal links in the device. please reboot and try again (the above steps except the "cp ..."). seems like the app tried to install busybox to /usr/bin but failed... I hope this failed attempt will be fixed by a simple reboot. otherwise it would be great to have the output of:
Code:
# su
# ls /usr/bin
No I re-flashed my main sbf and also did a factory reset to do a clean start, only thing since that full wipe I have done is rooting in the method I described, installed the screenmode widget, textedit, and android terminal emulator.
I have no such file /usr, are you sure I should have this in droid/milestone?
Here is my full output of my root system using ls:
tmp
pds
cdrom
sqlite_stmt_journals
config
cache
sdcard
d
etc
system
sys
sbin
proc
init_prep_keypad.sh
init.rc
init.mapphone_umts.rc
init.mapphone_cdma.rc
init.goldfish.rc
init
default.prop
data
root
dev
perhaps "/usr" is a sub inside one of the above folders? I tried using "find" to find it but that command dosn't seem to work since it won't even find the ones I can see with ls
I found it, /usr is inside /system... so if busybox was moved to /system/xbin, I'm guessing the ./ means install it to the parent directory which was /system which /usr is also in.
The errors I got said no such file "/usr" so It seems like it is trying to install to the wrong directory.... perhaps the command should be "busybox --install" or "/busybox --install" I don't want to experiment and mess things up before your opinion on this.
*edit almost forgot, output of /system/usr is
keychars
bin
srec
keylayout
share
output of /system/usr/bin is
panic_daemon
gki_pd_notifier
nvm_daemon
clean_dex.sh
brcm_guci_drv
bplogd_daemon
This is really strange. Maybe your busybox-file is corrupt.
Where did you download the busybox-file?
Which sbf did you flash?
So for explanation-purposes: When you put an executable or script file in any directory, you can execute it by first making it executable ("chmod 755 /system/xbin/busybox"), changing to that directory ("cd /system/xbin") and then executing it by adding "./" in front of it. The dot slash always stands for the _current_ directory. The _parent_directory has two dots "../".
If you want, you may try:
# /system/xbin/busybox --install
instead of
# ./busybox --install
Or maybe try this one:
# /system/xbin/busybox --install -s /system/xbin
Last time, I installed busybox into the directory /data/busybox, which worked brilliantly, but this path turned out to be unpractical. So I wanted to reinstall it in a different directory. I removed everything from /data/busybox including the directory itself and tried to start the whole procedure with /system/xbin. But that time it protested, that there were no files in "/data/busybox/...". Conclusion: The last busybox-install affected the second one. When I remember correctly I rebooted after that and used the app from the market *g*
My main sbf I flashed was android 2.1(uk version).
I downloaded busybox 1.17.2(won't let me post url here), was from droidforums dot net.
I don't remember if I tried all of his commands, but the last one on that forum seems to have worked.. I think......... it was:
"busybox --install /system/xbin/"
After remounting with your commands and typing the above command, I didn't get any errors, I synced and rebooted and now when I "ls /system/xbin" it shows a bunch of files/names which look like busybox commands. When I type "busybox" it outputs a bunch of commands too... so I am guessing this means it has succesfully installed? I can't say I tried these before attempting install so I have no comparison but I assume I would have a different output if busybox wasn't installed.
So assuming it worked, why would
"busybox --install /system/xbin/" work, and
"/system/xbin/busybox --install" not?
I also managed to install open recovery and do a nandroid backup succesfully
I have another short question, not specific to android but happens in all terminals I use, windows and linux alike. Sometimes I cannot execute commands anymore and it just becomes text in the terminal(just re-echo'ing my text output, without executing any functions)... can't remember specifically when it happened on my windows or linux pc shells, but on my android it happens whenever I have to give "SU" permission to the terminal, I have to quickly close the terminal and reload it again to get su access. I'm sure there is a name for this "state" where you are locked out of using commands in the shell and just typing text but I can't find a way to get out of it(without closing and re-opening terminal), there must be some key combination to be able to execute commands again in the current terminal session. If you have any idea what I am talking about?
Thanks for all your help so far.
droidtech1 said:
My main sbf I flashed was android 2.1(uk version).
Click to expand...
Click to collapse
Don't want to try one of the 2.2?
droidtech1 said:
I downloaded busybox 1.17.2(won't let me post url here), was from droidforums dot net.
I don't remember if I tried all of his commands, but the last one on that forum seems to have worked.. I think......... it was:
"busybox --install /system/xbin/"
After remounting with your commands and typing the above command, I didn't get any errors, I synced and rebooted and now when I "ls /system/xbin" it shows a bunch of files/names which look like busybox commands. When I type "busybox" it outputs a bunch of commands too... so I am guessing this means it has succesfully installed? I can't say I tried these before attempting install so I have no comparison but I assume I would have a different output if busybox wasn't installed.
Click to expand...
Click to collapse
Yes, this sounds very much like installation was successful.
droidtech1 said:
So assuming it worked, why would
"busybox --install /system/xbin/" work, and
"/system/xbin/busybox --install" not?
Click to expand...
Click to collapse
typing "busybox" without the path in front of it worked, because busybox is in the directory /system/xbin, which is already in your $PATH-variable (try "echo $PATH"). So the command interpreter (shell) will automatically look up "busybox" in /system/xbin.
I had a look at the busybox syntax and it's actually
Code:
busybox --install [-s] [INSTALLDIR]
So you have to put the directory you want to install in at the end. That's what your last command makes use of
droidtech1 said:
I have another short question, not specific to android but happens in all terminals I use, windows and linux alike. Sometimes I cannot execute commands anymore and it just becomes text in the terminal(just re-echo'ing my text output, without executing any functions)... can't remember specifically when it happened on my windows or linux pc shells, but on my android it happens whenever I have to give "SU" permission to the terminal, I have to quickly close the terminal and reload it again to get su access. I'm sure there is a name for this "state" where you are locked out of using commands in the shell and just typing text but I can't find a way to get out of it(without closing and re-opening terminal), there must be some key combination to be able to execute commands again in the current terminal session. If you have any idea what I am talking about?
Click to expand...
Click to collapse
Sounds like this is just the state, when shell is busy, i.e. when the last process you started is still running and no prompt ($ or #) is displayed. You may kill the last process in linux using CTRL+C, which will hopefully bring back the shell prompt. No idea which shortcut replaces this on the milestone/droid. I never use any android terminals, but only the ADB-Shell: http://developer.android.com/guide/developing/tools/adb.html
I'm learning to build apps for android so I thought having 2.1 on my droid would be better for testing (instead of 2.2). I also have a Nexus-S with 2.3 and a tmobile-pulse with 1.5. So I want to keep the most native version on each phone since most consumers won't install custom roms, although some will get updates anyway.
I use my droid a lot when I am out and use the terminal a lot so having busybox too has given me more to play around with. I actually find my droid much better working on than the nexus s, love the keyboard and dpad.
trying to install the DSPmanager apk i got here.
i've tried in ADB, and it gives an invalid install location error, tried in OI file manager and it gives me a big, happy green arrow and says "application not installed"
running GinSense 0.9
any help would be appreciated.
(sorry if this is the wrong thread)
(and i did search and will continue to do so until/unless i hear back)
EDIT to say - also tried app installer - same happy arrow and not installed as OI manager.
Most likely on your default install location there is no more space left to install the application. You can try to modify that by
Code:
adb shell pm setInstallLocation 2
from your PC having connected your phone in debugging mode.
The different locations are described in more details in this post.
i managed to get it installed with
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/DSPManager.apk /system/app
i don't understand why neither of my app installers were doing this, but i'm new to this, so maybe i'm missing something. that link looks like some useful info, though. thanks!
Ok, in that way you installed DSPManager on your /system partition. Generally this is read only and there is no space left. Applications normally will be installed on /data, /sdcard or (if supported by to ROM) on /sd-ext.
AndDiSa said:
Ok, in that way you installed DSPManager on your /system partition. Generally this is read only and there is no space left. Applications normally will be installed on /data, /sdcard or (if supported by to ROM) on /sd-ext.
Click to expand...
Click to collapse
i'm running ginsense with S2E, so i assume normally would be on sd-ext.
i tried both using the install feature and just manually placing the .apk in /sd-ext to no avail. i also tried placing it in /data with no luck.
what are the practical differences with putting it in /system? FWIW, it's running fine with it there (both the rom and the app)
i don't know if it makes a difference, but the app is DSP manager
i removed it from /system/app then used ADB shell. i *think* i figured out what i was doing wrong, the command line wanted me to specify an install location, which i wasn't doing. is this a "cleaner" install method?
Code:
adb shell
install /sdcard/DSPManager.apk /sd-ext/app
app shows up in the launcher again.
Typically just doing an
adb install /locationofapkonyourcomputer
Click to expand...
Click to collapse
will do the trick. You don't need to copy the .apk onto your phone just to install it.
As mentioned previously, it may be that your default install location is NOT set to /sd-ext/app and that /data is full.
Ok lovers of the pentest , the time has come, I got to dump my d1 which was not capable of doing this
so I am following this guide wiki.gitbrew.org/wikibrew/Androidebdroid
and I'm pretty sure I've mis-understood them because its not working
since I can't flash their .zip file yet I follow the manual steps
Mount device on computer, extract flashable zip to /sdcard/debdroid
Copy the directories of /sdcard/debdroid to /system (/sdcard/debdroid/bin to /system/bin)
chmod +x contents in the /sdcard/bin (debdroid, debkill, debshell)
everything seems to work no errors or anything then, to run back track I:
Download either the custom .img or the original .img
Create a folder called debian on your sdcard.
in terminal emulator "mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system" (where mtdblock3 is the system block) [I copied this exact command did not get any errors]
Open up /etc/debdroid.conf with your favorite text editor
Find the line "img="/mnt/sdcard/debian/debian.img" and change to "img="/mnt/sdcard/debian/bt5.img", save.
Start up the APK, Deploy, pentest from your pocket.
then after I start up the apk I open a new window in terminal emulator and try and debshell bash and I get the error debshell no such command or something.
What I think I did wrong was I coppied the folders from the zip which were METAINF and System into /system/bin and then I chroot +x the files of the zip that were still on my SD card....thats how I read it anyways...what am I doing wrong and how do I remedy this?
also I am excited to see if droid 4's wifi chipset will support monitor mode and packet injection, If it doesn't I am hoping I will be able to switch the mirco usb port into host mode and buy a usb wifi reciever connecting using a micro to female usb I soldiered
I have Ubuntu working, backtrack is next on my list. However I can say out wifi does NOT support monitor mode. At least not with stock driver. In fact trying to start it reboots the phone . I'll take a look later at your backtrack issue
Nice, I worked out a chroot/vnc environment on my D4 for Backtrack. Does your method boot backtrack natively rather than in a chroot?
I'm in the process of documenting the minor tweaks i used to get things working. I'll link it here once its public if it helps you. Seems like you're already beyond me though.
Nah, still chroot. Ive got it starting on boot though
Sent from my DROID4 using XDA App
Any news about monitor mode in bt5?
Sent from my GT-I9000 using XDA
Here's an old topic from the Droid X, http://www.droidforums.net/forum/project-bootloader-freedom/126350-drivers-droid-x-wifi-driver-info-success.html
I'm not sure if the information will be relevant here, but it sure seems like a good place to start, IMO.
[Project dormant unless someone else picks it up]
NOTE: This is a chroot for the Webtop, not the Android+VNC chroot method.
Hi everyone, this is my first guide (I'm not sure I can call it that yet, or if this is in the right section) so bear with me.
I tried the Debian chroot guide (http://forum.xda-developers.com/showthread.php?t=1093790), and I really liked the idea, but I had too many apt-get issues and it often crashed my Webtop, so I tried building my own Ubuntu Lucid chroot using rootstock, but internet didn't work.
I later saw this: http://forum.xda-developers.com/showthread.php?t=1184161, but the links were dead and the scripts it referenced were out of date. I'll sort of combine the two guides here since Backtrack actually works surprisingly well.
Just on a side note though, I haven't fully tested the Backtrack tools, but the only thing I haven't found to work are the wireless tools.
Let's start!
Required:
-Rooted Atrix (with Blur based ROM)
-LXTerminal installed on Webtop
-Enough free space (around 4 GB just for room)
-7-Zip
-Some Linux/Unix distro native or in a VM
1. Install the easy-signed.zip from the Debian chroot guide:
http://forum.xda-developers.com/showthread.php?t=1093790
but the other files aren't needed.
Make a folder called WebTopMOD (case-sensitive) on either external or internal memory for later.
2. Look here for reference: http://forum.xda-developers.com/showthread.php?t=1184161, but the links are dead. Active links are here:
Part 1: http://www.mediafire.com/?x9cgxzdx84vc6uj
Part 2: http://www.mediafire.com/?xaoidipkg1o7vgo
Part 3: http://www.mediafire.com/?po3nznbxgvdipur
Use 7-Zip to uncompress the three files (called bt.7z.001,002,003) and you'll get a bt.img.
Full bt.img in a zip:
DL from Mega or from Google Drive
3. The image isn't usable in this state yet, since the image is formatted with ext2, and we need ext3.
Copy the image over to your Linux VM or computer on a easy-to-find directory, and open up a Terminal window (usually CTRL+ALT+T).
In Terminal, type this in:
Code:
cd <directory where you put bt.img>
mkdir tmp tmpbt
sudo mount -o loop bt.img tmpbt
dd if=/dev/zero of=linuxdisk count=0 bs=1MB seek=4096 (This is the size of the chroot image you want, in MB)
mkfs.ext3 linuxdisk (just type y when it asks)
sudo mount -o loop linuxdisk tmp
sudo cp -rf tmpbt/* tmp
sudo umount tmp
sudo umount tmpbt
[Sorry, made a mistake twice] Copy the newly made linuxdisk file to a directory named WebTopMOD on your internal memory or sdcard-ext (folder and file names are case-sensitive).
4. Start Webtop, then open LXTerminal, then start the chroot by typing in:
Code:
/usr/sbin/linux
and after it loads for a bit, you'll get an xterm window with the shell for Backtrack!
If you want to quit the Gnome session, closing xterm doesn't work, since by issuing the commands to kill the webtop processes, it also kills the webtop window manager, and if you do close it there's some kind of weird glitch with a small popup window constantly disappearing and reappearing. (It'll be a WIP for now I guess, the only full solution is to reboot your Atrix). It seems to have to do with the way the linux command mounts the chroot disk under loop50, I'll try and make something to fix this later.
-----------------Extras moved below-----------------------
Pictures:
Chromium Running
BT Desktop (Gnome)
BT Desktop with AIW
THANKS TO:
k.taylor89 for the original Backtop Method
SystemR89 for the Debian chroot and scripts to make this work
The original developers of the Backtop chroot image
And any others I may have forgotten!
Extras:
If you want a GUI (Gnome):
k.taylor89 said:
You first need to kill off all the webtop crap do this by typing the following in xterm.
"ps ax|grep awn|awk '{print $1}'|xargs kill"
"ps ax|grep panel|awk '{print $1}'|xargs kill"
Then start gnome by typing "gnome-session" in xterm.
Click to expand...
Click to collapse
If you want to take it step further and start Gnome after bootup, this isn't a full solution yet but you could edit your start-oshwt-1.sh and 2 scripts so that the chroot automatically starts on bootup without anything else in Webtop, and from there start gnome-session. I'm testing that now.
Installing Apps:
Since this is based off of Ubuntu Lucid, you can install anything from the Lucid repos, you just have to fix the sources list since the Backtrack sources don't seem to work.
Code:
sudo cp /etc/apt/sources.list /etc/apt/sources.list.old (Backup just in case)
sudo nano -w /etc/apt/sources.list
Comment out (#) any line with the backtrack servers, and uncomment any line with the Ubuntu repos.
Press Control+X, Y, then Enter, then run apt-get update to update the repos.
Apps like Chromium install and run without a hassle (just run apt-get install chromium-browser), but I actually get the error "Bus error" for some reason when Chromium remains idle, it seems to be an unsolved bug in the version of Chromium for armel devices in the Lucid repos, if anyone else has a fix, please do tell.
First.
I think its only for lapdock ..........
3n3rg1c said:
First.
I think its only for lapdock ..........
Click to expand...
Click to collapse
Oh sorry yeah I forgot to mention that. I mean I guess if you have the mod that lets you use Webtop anywhere, that'll work too.
Hi,
The "Part 3: http://www.mediafire.com/?po3nznbxgvdipu" doesn't work.
Could you fix it.
Thank you.
sintoo said:
Hi,
The "Part 3: http://www.mediafire.com/?po3nznbxgvdipu" doesn't work.
Could you fix it.
Thank you.
Click to expand...
Click to collapse
Oh sorry I copied the link incorrectly, updated in OP.
i've gotten it running on my ubuntop model, when i ran it from the terminal it would not give me any issues when closing it back up. is there a way to only launch the gnome panel? running: gnome-panel in the terminal didn't work
etruj said:
i've gotten it running on my ubuntop model, when i ran it from the terminal it would not give me any issues when closing it back up. is there a way to only launch the gnome panel? running: gnome-panel in the terminal didn't work
Click to expand...
Click to collapse
I'm not sure if there is a way to start just gnome panel because of the way the chroot is implemented, since to run gnome-panel, an X session must already be running within the chroot and I need to figure that out.
My first two times i lUnched the session the wallpaper would flicker and then just the panels would come up. Now i get hit with the errors and loop pop ups. Maybe there is a way to launch the session then kill everything but the panel?
Sent from my MB860 using xda app-developers app
etruj said:
My first two times i lUnched the session the wallpaper would flicker and then just the panels would come up. Now i get hit with the errors and loop pop ups. Maybe there is a way to launch the session then kill everything but the panel?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
The workaround I found worked so far was to modify the start-oshwt-2 script so that it would run a very slightly modified version of the script that automatically starts gnome-session (gnome-panel alone is really stubborn, still haven't figured that out) and doesn't start whatever window manager in WebTop to avoid flickering errors and panel only errors (but of course you don't have access to anything from the actual WebTop, but you could also have start-oshwt open a Terminal window from WebTop too).
Can you attach the script?
Sent from my MB860 using xda app-developers app
etruj said:
Can you attach the script?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Just rename it to linux, and copy it to wherever you like on your Atrix. You can also copy it to a directory within your terminal path.
This isn't my script, it's from the Debian chroot, just modified to automatically start gnome-session (credit to SystemR89)
You might need to chmod +x the file.
Also, if you want to start it automatically from start-oshwt-2.sh, make sure you copy the file to a directory within the terminal path, and add the line
Code:
sfalv -i "linux"
and comment out any other line that starts a different X window manager.
running "sudo gnome-panel" gives me the panel while staying inside the original ubuntop. i think i can just swap out that one line in your script to get it working. thanks! also noticed my chrome crashes after a few minutes, ill post the error code and screen grabs soon but was wondering if you ever experienced anything like it?
etruj said:
running "sudo gnome-panel" gives me the panel while staying inside the original ubuntop. i think i can just swap out that one line in your script to get it working. thanks! also noticed my chrome crashes after a few minutes, ill post the error code and screen grabs soon but was wondering if you ever experienced anything like it?
Click to expand...
Click to collapse
Yes, in fact. It's a bus error, and I tried to fix it, but the fix doesn't work (and it only seems to affect Chromium).
Sorry for bumping such an old thread, but I was wondering if anyone wanted to take this project over, since I don't have an Atrix anymore and don't have anything to work with.
Thanks.