Hello !
I have a big problem. I tried installing clockworkmod recovery. I'm standing at Rom manager. I dont know what I clickking. One time 1 click to reboot to recovery and I have a black screen.
I'm rooted a phone, and i downloaded rom manager from filecrop, i think non-trusted.
You shouldn't use ROM manager. If you can get into the downloading mod, flash through Odin. If not, you may have to go get your phone repaired.
Sent from my GT-S5570 using XDA App
Riff j-tag or omnia repair tool will help you (((
Sent from my GT-S5570 using xda premium
You should have read previous posts here before you even tried to use rom manager. A lot of cases already where rom manager bricked their phone. If you can still boot it in download mode, better flash a stock rom thru odin and cwm thru odin as well.. then you can install custom roms..
Sent from my GT-S5570 using XDA App
Thanks every1 for quick reply.
It's my friend's phone. I tried to use CTBeastDroid?'s guide. I copied a file from Dreaming-rc29 and I tried a Power + Home combo it didn't work. Can I do ? Please tell me step by step. I never use SGM. I'm formatted external sdcard by my Captivate(phone, it use for sdcard reader). I had a black screen. And my friend's phone didn't do nothing.
Related
I just got a samsung galaxy SII epic touch. like an idiot I went to this forum to try to root it. Now I can't get back to the hboot menu. It just sais that it is downloading and hangs. How can I undo this??? Since then I have rooted the phone. Please help!
Try installing a rom using odin..guess an official rom will be good..this shud work if the phone can go into download mode..
Sent from my GT-I9000 using XDA App
I wish I could but I cannot get to hboot. Every time I try to get to the boot menu it goes into the download kernal mode which does nothing.
Sent from my SPH-D710 using XDA App
So I cannot flash any roms
Sent from my SPH-D710 using XDA App
But if it goes into download mode, install odin on you computer and you should be able to see your phone?
then you install a rom for your phone trough Odin, i notice that you say you got an SGS II this for instanse is the forum for SGS 1
no hboot
ok. but if I do this will it only root my phone? I have already done that. what I need is to stop the phone from going into this download mode instead of going to the hboot. Now I have a rooted phone that will not go into hboot mode. Is there some sort of startup folder that puts me into this mode? Is there a file that I can delete so I can get into hboot when I reboot?
I have a Samsung Galaxy Tab GT-P1000. Using Odin3 v3.04 I (accidently) flashed the Bootloader with the wrong binary. With the Auto-Reboot option selected on the Odin3, the device turned off and is not turning on again.
Before flashing, my Tab had the official Samsung GB 2.3.3 (P1000JPJPC if I am not mistaken).
Some threads suggest that I charge the Tab using the wall charger for 4 hours, and see if the battery icon appears on the screen or not, then connect the tab to the PC. I did that. I connected the Tab to the wall charger overnight. Nothing appeared on the screen. Then the next morning I connected the Tab to the PC, nothing happened. The PC does not recognize that there is anything connected on its USB port.
The Tab is not turning on. I've tried to press (and long press) almost every combination of the Tab's keys I could think of, but the Tab just won't turn on.
I guess I hardbricked my device (as explained in this thread)
I don't think I'll be able to apply the Unbrickable process explained here.
Having said that, my question is: Is there anything else I can do at home to revive my Tab, or do I need to send it to Samsung repair center?
-Adel
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
You can also send it to mobiletechvideos.com.
priyana said:
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
komplotter said:
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
Click to expand...
Click to collapse
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana,
Thanks for your reply. Yes, as far I could tell from reading up on it, I would guess mine is not bricked.
I can boot to download mode and to recovery - cwm (v3.0.0.5). I have tried downloading Overcome and anything else I thought might work but this is where I get stuck. I've wiped the cache and other things like that described on the net and on videos (actually this is what got me into this in the first place). When I copy a .zip file onto the external sd card and put it in the tab, I can't install the zip from the sd card because it can't find the directory I made. I'll have a look in your signature and see what I can find there but any guidance would be much appreciated.
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
priyana said:
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I managed to get CWM 5.5.0.4 and get ICS installed in my tab by using two files (CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS and P1000XXJQ1_P1000XXJQ1_P1000XXJPZ). I would still like to use Overcome and I have had a brief look at the installation guide. I'll have a more thorough look and then give it a shot. I see that there is a version 4.1.0. Would I use that in that same way as the 4.0.0 ROM, because the Overcome7_ROMv4_Wipe file won't extract (there seems to be a problem with it and I've downloaded it twice).
You don't need the overcome ROM.
Just GB stock safe and overcome kernel.
Sent from my GT-P1000 using xda app-developers app
HELP!!!! My Samsung Galaxy Ace S5830 is in soft bricked mode
After i used odin and it took forever and did not start at all, i removed the usb cable and now when i start up its always an icon of a fone n a triangle wif a ! in it and a computer bside it HELP PLS!!!! HOW COULD I FIX THIS?!?!
did you flash the correct firmware.check your device model and download the suitsble version and try flashing again.if you go to boot screen then remove your battery and goto stock recovery and wipe data and cache.dont panic just search and read you may get a solution.
Restore it then flash it again. That's why you always back up. If you didn't back up download the official firmware then root it again
Sent from my GT-I9300 using xda app-developers app
sajitharsan said:
did you flash the correct firmware.check your device model and download the suitsble version and try flashing again.if you go to boot screen then remove your battery and goto stock recovery and wipe data and cache.dont panic just search and read you may get a solution.
Click to expand...
Click to collapse
thanks for ur help but whn it starts up it gets into tat screen so i could not get into recovery so i cant do anythin
the one click unbrick could help but it could not sense my device so i nid anth idea on how to fix tis thnx
kelvin0gs08 said:
Restore it then flash it again. That's why you always back up. If you didn't back up download the official firmware then root it again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
thnx but my backup frm stock is lost as i lost my original micro sd n the problem now is tat i cant get into recovery mode
What do you mean you can't go to recovery mode?
Sent from my GT-I9300 using xda app-developers app
i have almost the same problem...i can access recovery and download mode and i flashed a lot of gingerbread versions but my phone wont boot up.
when i try to wipe data the phone restarts.
always when i try to start the phone it will boot up into recovery mode.
please guys help us with this problem.
PS:i get this : Can't acces to system/csc/XSK/system
When that happened to me I just Odin flashed it then it was working
Sent from my GT-I9300 using xda app-developers app
[Solved!]
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
http://forum.xda-developers.com/showthread.php?t=731989
Follow this guide after putting your phone into download mode.
Sent from my SGH-I897 using Tapatalk 2
chdiryoung said:
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
Click to expand...
Click to collapse
See this Captivate - PC Connection Issues, Download Mode and Recovery Mode Help thread on more info on how to get the phone to boot into Recovery...http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks, I tried getting into recovery mode using the guide on that thread but no luck. I haven't gotten to try the first guide suggested yet so when I have time I'll try that. Thankfully I can get into download mode fine.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks so much, I'm gonna try that on Monday first chance I get!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
4-2ndtwin said:
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
How long should/could it take Odin to detect/recognize my captivate? I couldn't wait to try the KK4 flash, but I've waited for about 10 minutes and it's not showing anything in Odin.:\
It should only take a few seconds.
See that Captivate - PC Connection Issues...thread i linked u to in my reply a few posts up.
Sent from my SAMSUNG-SGH-I747 using xda premium
Well I've been up all night lol but I got everything to work!! I guess it all just clicked with me and I understood and found all the answers in threads. THANK YOU SO MUCH!! Your link and Odin one click worked perfect. I think I had a problem with the drivers, that's why it wouldn't detect it. I read in another thread it could be that and I tried reinstalling the Samsung drivers but no luck. So I just switched to my windows xp where I'd never used heimdall drivers(I was on my windows 7) and did it on there, worked perfectly! I then went on to reinstall cwm and then cm 10.1.2 and I love it! Now I'm waiting for the Google play store .zip to download so I can flash it onto my i897! THANKS AGAIN!!! :thumbup:
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I installed Hyperion 8 custom rom on my s5570 using CWM, but than I noticed that it's actually for the s5570i. After the installation was done I selected reboot from CWM and now it doesn,t work at all. I tried turning on Download mode but it doesn't work. I tried fixing it with ODIN, wich was recognizing it, but now when I plug it into my computer it doesn't recognize it any more. Any ideas?
Try this simple 2 btn combo "hold power+home" which leads u to recovery mod, then u should flash the appropriate rom for s5570
Hit thanks button if this helped u
Sent from my GT-S5570 using Tapatalk
I know this. This is how I installed the costom rom. The problem is that the phone WON'T go into recovery or download mode - it's dead! thanks anyway
MarianThePC7 said:
I know this. This is how I installed the costom rom. The problem is that the phone WON'T go into recovery or download mode - it's dead! thanks anyway
Click to expand...
Click to collapse
USB JIG/JTAG or Samsung Service Care.
I don't have the tools necessary. Plus that I live in Roumania and i don't think there are many things I can do.
Is there any way I can unbrick it without using a JIG?