Factory Reset Not working blank screen! - Dell Streak 7

So I've had Honeycomb 3.2 on my streak for a few weeks now, and it's been working fine. I decided to do a factory reset and start from scratch in order to give the streak to my wife.
For some reason, after I get the boot screen and select factory reset of user data and internal storage, the streak just goes to a blank screen. The keys do light up, but that's it.
Now I can't even go back to how it was or factory reset. Has anyone had this happen before, and how do I fix it?
thanks

Make sure your tablet is charged above sixty percent.

Yeah I read that somewhere. I charged it until the green light came on. I was able to get into recovery mode. The problem is, once there, I click on factory reset, then nothing. Just a blank screen.
Is there another way of restoring the streak?

Yes there is, go to Settings, Privacy, and Factory Reset.

I can't go into android. Stuck at dell logo screen. When I try volume up and power and click on factory reset, it just shows a blank screen.

itsakram said:
I can't go into android. Stuck at dell logo screen. When I try volume up and power and click on factory reset, it just shows a blank screen.
Click to expand...
Click to collapse
In this forum there is a thread titled 514 ROM, this is a complete Honeycomb 3.2 rom. Download the package, save it to an external sd card, rename it "update.pkg" and boot into recovery mode like you did before and choose option 2. This will wipe your tablet and re install Honeycomb.

otnos i really appreciate your help, but the problem is exactly what you just mentioned. when i get into recovery mode, any of the options i pick and press power, the following screen is just blank. nothing happens at all. i can press 2,3,4, or 5 and i just get a blank screen.
can i nvflash the streak and return it to its original state?

itsakram said:
otnos i really appreciate your help, but the problem is exactly what you just mentioned. when i get into recovery mode, any of the options i pick and press power, the following screen is just blank. nothing happens at all. i can press 2,3,4, or 5 and i just get a blank screen.
can i nvflash the streak and return it to its original state?
Click to expand...
Click to collapse
You have two options, NVFlash back to whatever ROM you want to run, or you can flash the stock recovery via fastboot and then load the ROM update.pkg to the external SD and boot into recovery and flash the factory package... (the second way is the preferred way in my opinion)

cdzo72 said:
You have two options, NVFlash back to whatever ROM you want to run, or you can flash the stock recovery via fastboot and then load the ROM update.pkg to the external SD and boot into recovery and flash the factory package... (the second way is the preferred way in my opinion)
Click to expand...
Click to collapse
Yes, I agree.

Related

Bricked?

My hero is stuck on the HTC (white screen) reboot, it keeps looping every 15mins or so, until the battery dies.
I tried to go into FastBoot (which keeps flashing, the screen turns on and off), but I can get it to go into fastboot USB if I hold down the "search" button (and the screen stabilizes too)
I flashed the stock rom, but that doesn't help. I even tried to clear all the data by doing, home + back key.
Did I truly brick the phone? I even swapped memory cards to see if it would help, but no luck there.
Any help would be GREATLY apperciated.
Thank you!
I'm still pretty new to the rooting and flashing stuff (I've had my Hero for less than a week) but I ran into the same problem and was able to get out of it. If you have an external card reader that you can use, it would help greatly, because that's how I was able to add data to the SD card without having to access the phone. Turn your phone off and remove the SD card. Plug it into your reader, then into your PC, and add a custom ROM directly to the root of the card (i.e. - NOT inside a folder) like Fresh 2.3.3 or anything else you want to use (I used Fresh because I couldn't get CM6 to load). Put the card back into the phone and boot it into recovery mode (hold the HOME button whole powering it on). You should be able to access the ROM and flash it from there, just be sure to wipe first and backup at some point. Hope this helps!!
Did you completely wipe the phone (data and dalvik) before flashing a new ROM? If you didn't wipe the top 3 options (data, dalvik, ext3) before flashing a ROM, this may be what's causing your bootloop.
Bricking the Hero is very very very hard. Unless you flashed a GSM radio, you're pretty much safe
Go back into recovery, wipe EVERYTHING (except SD), flash original ROM, it should work.
Where is your dalvik cache btw?
cricketman24 said:
My hero is stuck on the HTC (white screen) reboot, it keeps looping every 15mins or so, until the battery dies.
I tried to go into FastBoot (which keeps flashing, the screen turns on and off), but I can get it to go into fastboot USB if I hold down the "search" button (and the screen stabilizes too)
I flashed the stock rom, but that doesn't help. I even tried to clear all the data by doing, home + back key.
Did I truly brick the phone? I even swapped memory cards to see if it would help, but no luck there.
Any help would be GREATLY apperciated.
Thank you!
Click to expand...
Click to collapse
do the stock ruu and you should be
fine...
@jordanjackthomas
I tried to do what you said, I extracted the zip file and placed its contents in the root of the SD card, but when I tried to boot up into recovery mode, It was still stuck on the HTC screen.
@chromiumleaf
I don't think I have, but how would I be able to fix that issue if I didn't?
@derekwilkinson
Luckily, I have a copy of my SD card, So I still have it, if it would be any use?
@Big-O-Devil
I have been flashing the stock RUU for days now, and its still stuck on the same issue, (i just did it now, just to be sure, again) and will leave the phone on, till it dies basically. that way I know that I know I waited for it to boot...
cricketman24 said:
@jordanjackthomas
I tried to do what you said, I extracted the zip file and placed its contents in the root of the SD card, but when I tried to boot up into recovery mode, It was still stuck on the HTC screen.
Click to expand...
Click to collapse
Don't extract the zip file. Just copy it to the root of your SD card. Hold down the home key + the power key to boot into recovery. If that doesn't work, try to using the volume DOWN button + the power key. Then press home when the screen loads up. I'm sure you know this, I'm just making sure you didn't forget anything.
YoungSinema said:
Don't extract the zip file. Just copy it to the root of your SD card. Hold down the home key + the power key to boot into recovery. If that doesn't work, try to using the volume DOWN button + the power key. Then press home when the screen loads up. I'm sure you know this, I'm just making sure you didn't forget anything.
Click to expand...
Click to collapse
Okay before, when I extracted the zip there was a boot.img file in there, but now i'll download
http://link.geekfor.me/freshhero233
and saved that link, and placed that into my SD Card. [will update this as soon as its done]
Great! Keep us posted
cricketman24 said:
Okay before, when I extracted the zip there was a boot.img file in there, but now i'll download
http://link.geekfor.me/freshhero233
and saved that link, and placed that into my SD Card. [will update this as soon as its done]
Click to expand...
Click to collapse
When you connect your phone to your computer does your computer make some kind of connecting. Noise.?.?.
Sent from my HERO200 using XDA App
YoungSinema said:
Great! Keep us posted
Click to expand...
Click to collapse
It's been about 1hr, and its just been on the reboot loop. I don't think it helped :/
Here is the some of the information thats on the "volume down" screen:
(HBOOT SCREEN)
HERC XC SHIP S-ON
HBOOT-1.47
..
Radio 2.42.01.04.27
@Big-O-Devil
And yes it does, I can see the device in ADB list of devices, but it is "offline"...
Big-O-Devil said:
do the stock ruu and you should be
fine...
Click to expand...
Click to collapse
I'm gonna have to agree with Big-O-Devil here, stop trying to do it through recovery and just use the RUU from HTC/Sprint
@derekwilkinson
I have been doing that, I've tried to use the HTC/Sprint RUU and its still the same. I've been flashing the .5 RUU and .6 RUU, but none of which have helped. They are all still stuck in the reboot loop.
Is my hboot version correct?
My device does this when I boot into hboot..
"It also does a SD card check when it boots up onto this screen, says something like
herodiag.zip
etc etc"
cricketman24 said:
@derekwilkinson
I have been doing that, I've tried to use the HTC/Sprint RUU and its still the same. I've been flashing the .5 RUU and .6 RUU, but none of which have helped. They are all still stuck in the reboot loop.
Is my hboot version correct?
My device does this when I boot into hboot..
"It also does a SD card check when it boots up onto this screen, says something like
herodiag.zip
etc etc"
Click to expand...
Click to collapse
Ok so flashing doesn't. Work... look for the stock ruu program that restores your phone back to the its original 2.1.. it's a program that does everything for you... if it works you are going to have to reroot again and start from the beginning.. let me know......
Sent from my HERO200 using XDA App
pm me i will give the file to you.....
Big-O-Devil said:
Ok so flashing doesn't. Work... look for the stock ruu program that restores your phone back to the its original 2.1.. it's a program that does everything for you... if it works you are going to have to reroot again and start from the beginning.. let me know......
Sent from my HERO200 using XDA App
pm me i will give the file to you.....
Click to expand...
Click to collapse
Yes, I too suggest that you re-root.
chromiumleaf said:
Did you completely wipe the phone (data and dalvik) before flashing a new ROM? If you didn't wipe the top 3 options (data, dalvik, ext3) before flashing a ROM, this may be what's causing your bootloop.
Click to expand...
Click to collapse
cricketman24 said:
@chromiumleaf
I don't think I have, but how would I be able to fix that issue if I didn't?
Click to expand...
Click to collapse
From your recovery menu (holding Home then pressing Power to turn the phone on) there is an option called "Wipe". Select that one, then there are 5 options within that. Do the top 3 of them (data, dalvik, ext3). After that, push your Back button which brings you to the main recovery menu. Then select Flash zip from sd card and go through the process of flashing whatever ROM.zip you have on the root of your SD (the whole .zip itself, don't extract all the files out).
If that still doesn't cure your bootloop problems, then you need to download the stock RUU (you can find it at this post: http://forum.xda-developers.com/showpost.php?p=6686401&postcount=2). This RUU is NOT the same as nfinitefx45's STOCK ROM! You have to run this RUU through HTCSync on your PC. But try the wiping that I recommended above first....then do this RUU if that doesn't work. Know that running the RUU will remove your root access, so you will have to re-root again after it's done.
chromiumleaf said:
From your recovery menu (holding Home then pressing Power to turn the phone on) there is an option called "Wipe". Select that one, then there are 5 options within that. Do the top 3 of them (data, dalvik, ext3). After that, push your Back button which brings you to the main recovery menu. Then select Flash zip from sd card and go through the process of flashing whatever ROM.zip you have on the root of your SD (the whole .zip itself, don't extract all the files out).
If that still doesn't cure your bootloop problems, then you need to download the stock RUU (you can find it at this post: http://forum.xda-developers.com/showpost.php?p=6686401&postcount=2). This RUU is NOT the same as nfinitefx45's STOCK ROM! You have to run this RUU through HTCSync on your PC. But try the wiping that I recommended above first....then do this RUU if that doesn't work. Know that running the RUU will remove your root access, so you will have to re-root again after it's done.
Click to expand...
Click to collapse
+1.. that should do the trick for you... good luck....
I apologize, I wasn't using the correct terms.
I don't currently have the phone rooted, I have used the Sprint/HTC RUU_Hero_C_Sprint_2.27.651.5_R_signed_release(2)
file to "reset"(if you want to call it that) back to stock mode...but that doesn't do anything, it still is stuck in a reboot loop.
So currently, I dont have any options other than the default when I press "home" on the phone while turning it on. It just automatically clears the data when I do that.
@Big-O-Devil - I have used that file in that post before, and It doesn't help the situation. It is also stuck in a reboot loop.
@YoungSinema - If the file is different from the STOCK RUU, the "exe" that runs...then I would love to try that out. I went ahead and sent you the pm just incase.
Try running the RUU again via HTC Sync on your PC while your phone is turned on and during the bootlooping.
chromiumleaf said:
Try running the RUU again via HTC Sync on your PC while your phone is turned on and during the bootlooping.
Click to expand...
Click to collapse
How would I do that, since HTC Sync actually never connects to the phone while the phone is turned on and during the boot loop?
How can i run the RUU via HTC Sync?

G1 will not recover ??

I have G1 sitting around that I never messed with until last night, so if it's bricked, it's not a big deal. The phone will turn on, and loop through the splash screen. The only way it will boot is in safe mode. When trying to do ANYTHING in safe mode (aside from power down), everything will FC. If i go into the recovery menu with the Home plus End key sequence, I get the "can't open cache recovery command". I've tried to install RC33 in that screen, and get "installation interrupted".
The phone was given to me, so I really don't know if it was rooted or what was on it before. I do remember it worked, and just one day stopped working. When it was working I never saw a superuser icon or any other apps you usually see with a root. Thanks in advance for any help.
No one? Is there just a full update I can throw on the SD card and get it running?
Try formatting the sd card fat32, putting dreaimg.nbh(search) on it. Then, put it in the phone and boot with camera+power. Follow the onscreen instructions, and hopefully it'll work.
If it doesn't, not my fault. Good luck!
Thanks Michael, but I did that already and it really didnt change anything. I noticed the recovery menu looks a bit different, and when I go to safemode, the "android" looks different, but thats it. Still cant boot, and still shows there is no recovery in the recovery menu.

[q] need help! Black screen on my verizon galaxy tab 7

I tried a flash and think i messed my tab...now its just a black screen with a faint light in the background like its on but its no images.......my battery icon pops up then distorts away and thats it ....can get into download mode but not recovery.....tried holding all 3 buttons got this lil android dude in the corner with a sign sayin something about power reset but cant select nothing......help me please......
Put it in d/l mode and flash one of the stock roms with Heimdall.
D
i tried a stock flash with heimdall it flashed successfully but i still get the SAMSUNG logo that flashes and go away,buttons light up at the bottom,can go in download mode but not reboot mode,phone stay on with a faint light ,so i assume that its on somehow.....help
Did you follow this exactly?
http://forum.xda-developers.com/showthread.php?t=967175
One thing I missed here before was to wipe data and cache. Otherwise I go into boot loop.
how to get recovery mode
i cant wipe nothing because i cant get to recovery,just download mode
done it step by step
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......
chubbyflood said:
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......
Click to expand...
Click to collapse
Use UnBrickable Mod
http://forum.xda-developers.com/showthread.php?t=1341753
Although you get a black screen on boot, it might still be working....
Chubbyflood,
If you are in the same situation as I am then the tab is still working, you are just getting black screen on boot up. It played tricks on me for ages when I was first rooting by tablet; but it turned out it is just the boot up screen that isn't showing.
This is my situation:
-Press and hold Power button to turn on.
-I see the Galaxy Tab / Samsung initial boot image for about 1 second, and also hear the "boot chime"
-Then the screen goes completely blank (but you can tell it is still on with a little light showing.
-The four "hard button" lights will light up briefly a couple times
-Wait approximately 30 seconds to a minute (to be safe and give the tablet time to boot up - it is actually booting up)
-Tab the Power button once, to turn the tablet off (now the screen is clearly off)
-Tab the Power button again, and the tablet will be up and running as normal.
I am guessing the boot animation / images are failing in some way, but the tablet is booting up as normal.
I've just learned to live with it, because I haven't had a chance to figure out what's going on, but it honestly took me a good hour or so, and a few (unnecessary) flashes, before I realized the thing was up and running fine, it just need to have the button pressed on and off.
One final thing to mention; don't have the tablet plugged into anything. I seem to remember leaving it plugged into the PC didn't help (I think).
Hope that makes sense.
Cheers
Ed.
Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.
Juiced_RL said:
Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.
Click to expand...
Click to collapse
Have you found a resolution to this? Mine tab is doing the exact same thing as yours after the cubed rom.

[Q] Help: Galaxy Mini/Pop won't boot.

I haven't rooted my phone whatsoever or installed a rom or something. One day, it just won't boot. I don't use it all the time, so the battery died. I charged it so I could use it and download an app. When I try to power it on, it will only reach the flashing Samsung logo with the black background and won't go any further so I result to opening the back cover the remove the battery and try turning it on again. Still won't boot. I tried draining the battery, but it still won't boot. Would booting it without the SD card solve this problem? I heard that if I did that, I would have to factory reset it using the hardware keys. I don't want to erase everything in the phone since I'm not able to back it up. Please help. Thanks!
ZAYNlienware said:
I haven't rooted my phone whatsoever or installed a rom or something. One day, it just won't boot. I don't use it all the time, so the battery died. I charged it so I could use it and download an app. When I try to power it on, it will only reach the flashing Samsung logo with the black background and won't go any further so I result to opening the back cover the remove the battery and try turning it on again. Still won't boot. I tried draining the battery, but it still won't boot. Would booting it without the SD card solve this problem? I heard that if I did that, I would have to factory reset it using the hardware keys. I don't want to erase everything in the phone since I'm not able to back it up. Please help. Thanks!
Click to expand...
Click to collapse
You can try to boot it without SD card, but i don't think that's the problem.
I think your only possible solution is to try doing a factory reset. Try to press HOME button and POWER button together until you get to the recovery. Than, depending on the recovery you have, search for a "wipe cache/data" or "data reset".
Another solution might be using Odin, but that's the last one...
frazar said:
You can try to boot it without SD card, but i don't think that's the problem.
I think your only possible solution is to try doing a factory reset. Try to press HOME button and POWER button together until you get to the recovery. Than, depending on the recovery you have, search for a "wipe cache/data" or "data reset".
Another solution might be using Odin, but that's the last one...
Click to expand...
Click to collapse
It did work. I thought of doing that but I waited for my friend so I could consult for another way, but I resorted to a hard reset. Thanks!
sorry for you, you can't get your data back
but to solve this
you can try to wipe everything through recovery mode
(while turn of, home button + power)
if you still can't access recovery mode or still the same after wiping
you must flash your mini
[TUT]Official Gingerbread 2.3.6 09.02.2012 GalaxyMini s5570~ODIN~UPDATED
for later, backup your data app by using Titanium Backup
must root

Possible brick after build.prop edit. Verizon LG G2

Hello,
I've been rooted for a few months now and have never had any problems. I wanted to use that Milk Music app from Samsung so I followed the instructions and was able to get it working on my phone and have been for awhile. I recently decided it would be a good idea to change the build.prop file back to its original state, so I copied and pasted it in using Root Browser. (I had made a backup file stored elsewhere). Once I did that I rebooted my phone for the changes to take effect. After I did that I cannot get my phone to turn back on. It displays the LG animated logo screen and then goes completely black. The light on top of the phone radiates blue/green. I've read through several forums about this issue and have tried everything in order to get it to work and for some reason, using my computer and ADB always gives me an error: device not found. I have installed the drivers and everything. Anyone else run in to this problem before? I would really appreciate it.
If you are on stock rom, just rooted. I would think you should be able to factory reset through stock recovery.
Confirm the process but i think you power completely off. Then hold volume down and power at the same time when you see the lg logo release both buttons then press both buttons and hold them.
Should take you to factory reset.
Not 100% certain but this will probably be your next step if you can't get a computer to see it.
Good luck
2111
The factory data reset didn't really change anything. For some reason I cannot boot into recovery mode either. I can put it in download mode though, but my computer still has a problem recognizing it.
brody_low said:
The factory data reset didn't really change anything. For some reason I cannot boot into recovery mode either. I can put it in download mode though, but my computer still has a problem recognizing it.
Click to expand...
Click to collapse
If you can get into dl mode then you should be able to return it to stock which should reset everything. Returning to stock has its own downside but at least you'll be up and running again.

Categories

Resources