Please can anybody help me?!!
I used the Chinese ics version, then i tried to go back to stock ginderbread .
but what happened was when i'm trying to flash the stock rom into my note, i stuck factoryfs ,
i tried it over 5 times, but with the same thing..
plz can anybody help me what to do ?
the odin log as below :
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> cache.img
<ID:0/011> factoryfs.img
When you have flashed your note with a stock rom, you loose the CWM.
Put volume up, home, power to go on android recovery (not CWM) and select wipe factory reset.
After it try to flash your note with the LA4 stock rom with Odin
I did this and my note reborn
mkhader said:
Please can anybody help me?!!
I used the Chinese ics version, then i tried to go back to stock ginderbread .
but what happened was when i'm trying to flash the stock rom into my note, i stuck factoryfs ,
i tried it over 5 times, but with the same thing..
plz can anybody help me what to do ?
the odin log as below :
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> cache.img
<ID:0/011> factoryfs.img
Click to expand...
Click to collapse
You sure you have Kies installed on your system ? Or have all the drivers installed if not Kies ??
Make sure the com port is detected and there is no auto find drivers from web service running in your system tray if you are on win 7 system.
Edit : Also let know which stock firmware you are using. Hope you following the guide by Dr Ketan !
Related
I need help PLS!!
I get to download mode but Odin wont get stock here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
Then the screen turns blue or purple. Cant boot into recovery because I have the 3e with no power button.
PlS THX!
Are you starting up Odin before you put the phone into download mode?
I've had Odin stop at various places before. The method that works for me is having Odin up and running, power off phone, remove battery & sim, hold vol up and down, put battery in, plug in usb.
Check this out for more suggestions, http://forum.xda-developers.com/showthread.php?t=819105
darcjrt said:
I need help PLS!!
I get to download mode but Odin wont get stock here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
Then the screen turns blue or purple. Cant boot into recovery because I have the 3e with no power button.
PlS THX!
Click to expand...
Click to collapse
This is normal behavior, you need to let the blue/purple screen go, it will eventually reboot and you will be fine.
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
zacthespack said:
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
Click to expand...
Click to collapse
yes odin said it was successfull..
vijai2011 said:
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
Click to expand...
Click to collapse
yes.. where can i get such an older stock gb rom?
lol4it said:
yes odin said it was successfull..
yes.. where can i get such an older stock gb rom?
Click to expand...
Click to collapse
They in development section.Its a sticky thread.BTW if you dont bother about loosing your sd-card data and about binary counter,flash darkyrom 3.4-RE.Since it repartitions your phone,you must be fine...
i dont care about dat data... backuped everthing..
i just want my phone to work..
lol4it said:
i dont care about dat data... backuped everthing..
i just want my phone to work..
Click to expand...
Click to collapse
Ok thn better flash darkyrom_note 3.4 RE.Its in development section.But it will increase the counter and give yellow triangle for sure...
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
lol4it said:
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
Click to expand...
Click to collapse
Yeah thats the one...
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
theres written in blue RESET in odin.. what shall i do?
EDIT:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
ok finished but my screen is still black Oo
EDIT 2:
said nothing.. i love u dude and i dont care about dat triangle..
my Gt-N7000 has a soft break issue it sticks on firmware upgrade encounterd ....
so i was flashing PhilZ CWM using odin but this what i get
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
Ist this only a recovery or a full kernel?
[SOLVED]
i was flashin a file called "PhilZ-cwm6-DXLSE-OLB-4.93.6.tar"
But i downloaded another called ' PhilZ-cwm6-JPLSB-UAE-4.93.6.tar'
and i worked fine amazing the file is flashed and all is ok ^_^
Hello to all, I have a Galaxy S6 G920AUCU1AOE2 . This have troubles with IMEI (350000000000006) I upgrade this to G920AUCS4CPG1_Recovery (Downloaded from here) with ODIN v3.12 and work OK Thinking what maybe the IMEI trouble Fix , but no , still have bad IMEI .
I need downgrade to G920AUCU1AOE2 , i download files from
https://forum.xda-developers.com/att-galaxy-s6/general/g920aucu1aoe2-odin-files-update-t3116348
but Odin cant install this rom , say:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is possible make an downgrade from G920AUCS4CPG1 (6.0.1) to G920AUCU1AOE2 (5.0.2) ?
I need do this for root my phone , Kinroot..pinpong cant root G920AUCS4CPG1
Regards !
Ok now i can get root , no need Downgrade, i use SM-G920A_ENG_ROOT_6.0.tar with Odin (AD) and Root OK.
Now.. i am trying to restore Imei , how can i do it ?
I try with Samsung Tool Pro 24.3 (I have not the box, just software), but selecting repair say this :
Waiting ADB device... time out
Phone not found
Regard
I bought the phone from a friend and now it is giving me this error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 6639 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
I'm trying to flash pie on to it and I'm using the files from the main thread. Any ideas why the error is happening or how I could fix it?
Thanks
doctor_slim said:
I bought the phone from a friend and now it is giving me this error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 6639 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
I'm trying to flash pie on to it and I'm using the files from the main thread. Any ideas why the error is happening or how I could fix it?
Thanks
Click to expand...
Click to collapse
Wassup Doctor_slim,
Generally when you recieve an error at abl, it means you are attempting to flash firmware with the incorrect boot loader version.
Do you mind posting your current Baseband Version?
Sent from my SM-N960U1 using Tapatalk
"main thread" is very general.
what exact phone do you have?
what exact files are you flashing?
did you read carefully about:
-using Odin and diferent versions (regular and patched)
-which device you have and its current firmware
-what is your intentions appart from just flashing pie.( u or u1 firmware? and latest pie build? or some random old build?)
if you search and read about the above topics, you'd probably succeed.