[Q] re-flashing recovery... - TouchPad Q&A, Help & Troubleshooting

Hi,
I've got a gingerbread ROM installed, and am having a problem with CWM.
At the moment, all I get is the options to boot WebOS, boot CM, WebOS recovery, shutdown, or reboot.
I have no options to mount storage or flash files, and have tried to re-flash CWM a number of times with no success.
Does anyone know what I've done wrong?
Also, if I go into the USB mode (power + vol up), on exiting this mode, the Touchpad won't do anything for about 10 minutes plus - just black screen & nothing happens when I press power button, or any other combination of buttons.
Help would be appreciated, as I can't install new roms etc from CWM, which is quite annoying!
Thanks!
EDIT: I've managed to fix this now - sorry for post! Cheers, and feel free to delete this thread.

groves olehred
how you fix this ?

Related

[Q] DOFT or Semi Bricked phone, Download mode possible.

Hey folks, yesterday i accidentally flashed a theme that didnt go well with my rom and now I am stuck on the bootscreen "Samsung Galaxy S" Logo....
anyways, my laptop recognizes the phone and I can also get into the download mode,
what are my options from here?
I need some kind of program like odin right?
- Also semi-flashing-noob here -
any help is GREATLY appreciated!!!
dont panic its no problem.
many of us get boot loops when flashing themes. do you have recovery mode ??
if so, try to flash the theme again, but before rebooting, wipe cache / dalvik cache and see if it boots then.
if not just do a factory reset. that should clear it up.
ODIN should be a last resort, sometimes it is not necessary to use.
thanks for the quick reply,
how do i get into recovery mode? the 3 button combo was volume up + home + power right?
cause i tried various combinations and could only get into the "Download mode"
yes volume up is recovery, volume down is download mode.
if recovery dont work, then you will need to use odin.
you will lose all your data so i hope you made a backup
there is a reset button under the back cover, in the middle of the camera and the speaker. this may fix your problem, but i have never tried it.

[Q] MIUI 2.3.4 for Galaxy S Gone wrong

Hi All - while in the process upgrading from the previous version of MIUI to this latest one, I accidentally selected the 'restart system option after formatting the system, cache and data without flushing the new ROM and now the phone won't boot up. It goes to the main Galaxy S screen followed by Galaxy S Glitch screen then it runs some coding (in seconds so i don't know what is says) and then back to main Galaxy screen in a loop.
What I have tried
> Going to recovery mode with vol up + home + power button (released @ first Samsung Screen) but then it goes back to second Galaxy S Glitch screen in the same loop.
> Going to download mode with vol down + home + power button and it does the same as going into recovery mode.
> Tried to do go into recovery and download mode multiple times using different combinations of vol up, vol down, home and power button without success.
> Read through the threads here but I was not able to find anything with the same or similar problem problem
> I tried to follow the help provided by Thyrador on this forum
http://forum.xda-developers.com/showthread.php?t=1109110 with Odin except using the jig method and no go
> Connecting phone to ODIN keeps on going rebooting in the phone in a loop as well.
I know if I can go into recovery mode I will be able to flush the new ROM but getting there is the problem.
I would appreciate your help with this and hope there is a fixable solution.
IphoneHater007 said:
Hi All - while in the process upgrading from the previous version of MIUI to this latest one, I accidentally selected the 'restart system option after formatting the system, cache and data without flushing the new ROM and now the phone won't boot up. It goes to the main Galaxy S screen followed by Galaxy S Glitch screen then it runs some coding (in seconds so i don't know what is says) and then back to main Galaxy screen in a loop.
What I have tried
> Going to recovery mode with vol up + home + power button (released @ first Samsung Screen) but then it goes back to second Galaxy S Glitch screen in the same loop.
> Going to download mode with vol down + home + power button and it does the same as going into recovery mode.
> Tried to do go into recovery and download mode multiple times using different combinations of vol up, vol down, home and power button without success.
> Read through the threads here but I was not able to find anything with the same or similar problem problem
> I tried to follow the help provided by Thyrador on this forum
http://forum.xda-developers.com/showthread.php?t=1109110 with Odin except using the jig method and no go
> Connecting phone to ODIN keeps on going rebooting in the phone in a loop as well.
I know if I can go into recovery mode I will be able to flush the new ROM but getting there is the problem.
I would appreciate your help with this and hope there is a fixable solution.
Click to expand...
Click to collapse
I have done that a few times and both CWM and download mode should be there.
Make sure everytime you try the 3 buttons you actually remove the battery before trying.
K.
Edit: the coding you are talking about is CWM trying something and that's shy I think it is still there.
Did you just format system?
Sent from my GT-I9000 using XDA Premium App
Thanks for your response
I actually formatted the system, data and cache without flushing the new ROM.
I tried what you said about removing the battery but that didn't show anything on the screen when I tried the 3 buttons. Is that what you meant?
cheers
IphoneHater007 said:
Thanks for your response
I actually formatted the system, data and cache without flushing the new ROM.
I tried what you said about removing the battery but that didn't show anything on the screen when I tried the 3 buttons. Is that what you meant?
cheers
Click to expand...
Click to collapse
What I meant was a bit dumb as since you have a bootoop you would have removed the battery anyway each time to try.
I normally flash the same way like you and I always do a factory reset (which formats Data and cache and I do the system manually. Unless soemthing has gone seriously wrong I don't see why you would not be able to get back to recovery?
I have even done it today actually and managed to go back to recovery.
I would say try and boot into download mode. Did you use Download Mode in the past? Are you sure it is there?
I read somewhere else someone saying that it does not always work the first time. Give it a few tries.
Your last option would be the JIG obviously but hopefully you should be able to get it sorted without.
K.
To tell you the truth I always use an app to boot the phone into recovery or download mode however one of my work colleagues has always being able to reboot my phone into any of these modes using the three buttons - not sure how. I will continue to try anyway.
Thanks again for your response and for give me hope that this has happened to you in the past.
cheers

[Q] Stuck on LG logo after CM7! help!

I recently installed CM7 after rooting my phone with Superoneclick and installing Clockworkmod. However, after installation of CM7, i managed to boot up the system, played around with it and realised that i needed to install the google addon as well. So i rebooted the phone to enter into CWM recovery, however the problem started.
My phone is now stucked on the LG logo screen and would not change. I left the phone in that state till the battery went dead. Recharged the phone and it remained on that screen.
Tried to connect the phone to the PC to flash it with smartflash, but it doesnt work at all. I removed the battery and held the volume down button while plugging in the usb cable. All i see is the phone stucked on the white LG logo screen.
Is there any way that i can reformat the contents of the phone or is my phone certified?
All help would be much appreciated!
Power up directly to cwm by pressing power button and volume down key at the same time.
Once in cwm, full wipe including /system and reflash cm and gapps.
Good luck.
I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?
audilogic said:
I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?
Click to expand...
Click to collapse
Hmm.....if u can't power to cwm directly then perhaps try smartflash to any stock rom.
1. Download any stock rom
2. Start smartflash app from pc
3. In power off mode, just press volume down to boot to software update screen. Start smartflash stock rom.
4. Boot up stock rom
5. Install rom manager and flash cwm from rom manager. (Or download cwm from Rusty! Cwm thread)
6. Boot to recovery
7. Flash cm rom
8. Flash gapps
Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.
yup, tried the exact method that you suggested too. But it doesnt work. Still gets stuck at the LG logo.
Rusty! said:
Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.
Click to expand...
Click to collapse
This method worked! But i have another problem, windows found an APX device, tried to install it but failed. It says driver was not found. Do i have to install a specific driver for this to work? Thanks!
Yes, good point: http://android.modaco.com/topic/335...k-rom-release-v10b-dated-1300166062-15032011/
I have managed to flash the phone and it is back working now. Thank you so much for your help rusty and temasek!
Hi, first post, hope the thread is not too old.
Unfortunately this is my best chance.
I have the same problem on my O1:
Updated from mik's beta 6.5.7 to beta 6.5.8 with the clockwork manager, at the reboot, I was stuck on lg logo.
Unfortunately usb + both volume buttons didn't work.
It remains still at the lg logo.
Pressing home + both volume, it repeately reboots.
In every case I can't go in recovery mode, so I can't wipe the system folder.
Any help will be appreciated,
thank for your time!
PS: sorry, maybe thread in p500, cm7 will be more appropriate.
hold power button + volume down button for 5-10 seconds may work, phone will reboot into recovery mode, then you are able to flash a stock rom or restore your nandroid-backup (if you made one)
good luck, hope it helps you
thanks, I saw a useful post here:
http://forum.xda-developers.com/showthread.php?p=18531050#post18531050
Then I proceded as you wrote.
Now I'm stuck at adroid logo, without the chance to wipe cache.
The recovery does not start: loading bar and then forced reboot...
I don't know what to do
nvflash
maybe you try this link
android.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/
Sorry, i don't get the link working, copy it in your browser, then it should work (i'm posting with my phone that's why the link is'nt correct, but it works with browser, i tried it out)
If the link doesnt work, search 'nvflash lg p990 instructions' with google, you'll see the modaco website with the instructions and the download links
Sent from my Optimus 2X using XDA App
Thank you. A few hours ago, I managed to make it working.
Thanks for your answers, I appreciated.
nvflash is the way to go. Always make sure to use the usb ports on your motherboard (back of your computer) and not some usb hub or so.
Had a black screen for 8 hours, not able to boot, flash, recover or anything.
Changed usb port and I was able to flash the phone again.

[Q] P880 hangs at boot | No S/W update available

Hello,
After rooting my p880, my phone hangs at boot. Just after the boot sound (*pling* ) the phone is hanging. The boot image is still moving.
Things I tried already:
I followed this thread http://forum.xda-developers.com/showthread.php?t=2069723, which tells to do a kdz update. This is not working, as I am not able to get to the S/W upgrade screen. Instead, when I start the phone using the power button + volume down, i get the Android system recovery menu (3e).
I tried to upload a new (cyanogenmod) rom using adb sideload, but that didn't work, as the file I used was damaged (I will retry with new file).
I also did a factory reset and a cache wipe.
Can someone tell me what is best to do?
Kind regards
X-cal
x-calibur1978 said:
Hello,
After rooting my p880, my phone hangs at boot. Just after the boot sound (*pling* ) the phone is hanging. The boot image is still moving.
Things I tried already:
I followed this thread http://forum.xda-developers.com/showthread.php?t=2069723, which tells to do a kdz update. This is not working, as I am not able to get to the S/W upgrade screen. Instead, when I start the phone using the power button + volume down, i get the Android system recovery menu (3e).
I tried to upload a new (cyanogenmod) rom using adb sideload, but that didn't work, as the file I used was damaged (I will retry with new file).
I also did a factory reset and a cache wipe.
Can someone tell me what is best to do?
Kind regards
X-cal
Click to expand...
Click to collapse
you're entering s/w mode wrong. dont press power button. just hold vol down and plug in usb
OOOhhhh noooosss....... That's kind of stupid .
Thanks!

[Q] Doesn't able to get into recovery

Hello everybody,
I'm newbie around here. I like solving my problems but this time I couldn't find any proper information.
History: My phone stopped to save photo after taking. It occurred several times. I was using android revolution hd 6 at this time. Then I've tried to change my rom to 4.2.2. I've got into the recovery and superwiped all the data. Then I've tried to choose 4.2.2 zip file but "back menu button disabled" I've tried several combinations to change it. But it didn't work. Then I thought that if I reboot it, it can be okay. I turned off my phone by removing battery. Then I've waited a little and pressed on power button to use last power inside phone. After all the things, I tried to get into boot menu but power + volume up or power + volume down didnt work. So I'm not able to install new rom.
I've attached some log files for superwipe and recovery. Any help would be appreciated. Thanks in advance. I hope we'll solve this problem.
I was trying different combinations to get into recovery. I didn't understand exactly which combination but now I'm in recovery. Sorry for taking your time.
Since you are rooted, you should have option for soft reboot under settings or developer option.
If you can't find, install app
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
this will allow to reboot directly to recovery from phone
If adb enabled....i think you can connect to pc and give command to reboot to recovery...
if I remember correctly....
adb reboot recovery (but google it before trying)

Categories

Resources