Will Devil kernel work with docs master v5? If so which build of devil?
I am testing for the kernel dev. Just wait there are some bugs that need to be fixed first...
I'm confused isn't Devil kernel i9000 only? Unless someone is porting it.
Thanks b-eock. Will keep checking that thread.
It is compiled from THS kernel source. So I am testing it right now. It should be around soon.
Good reviews on 1.1.6 i see. Hope that means bugs are worked out? Running glitch b5 on captivate and this kernel is taunting.
Related
Hi everybody,
I'm still on CM6, mostly because i want 720p recording, and i have to say that IR kernel give me about 30% more battery life compared to stock CM6 kernel.
Unfortunately I'm not able to use any of the last IR kernels.
If I try to install any of the 2.6.38 based kernel i get a bootloop, so I'm using the last based on 2.6.37 (31 march). With this kernel my battery life is very good, but I can't connect my N1 via USB... the notification does not appear... I think it's a bug.
The kernel I'd like to use actually is the last one at the time of this writing: 2.6.38.4_AVS-CM6_CFS_20110424_1137.ZIP
But even if it is marked as for CM6, i get a bootloop...
Anyone have the same problem? What is the best/last IR kernel for CM6?
Thank you very much and... sorry for my English
Zener79
Use 2.6.35 kernels, they're the last for Froyo, if I remember right. Look at the kernel version explanations in iR's thread, you'll see.
I'm using IR Kernel based on 2.6.37 and it's working fine, except for the USB problem.
What I don't understand it's why for each kernel release the developer still upload kernels for CM6 even if we can't use with Froyo...
I mean...
2.6.38.4_AVS-CM6_CFS_20110424_1137.ZIP it's supposed to be for CM6 and
2.6.38.4_AVS-CM7_CFS_20110424_1139.ZIP it's supposed to be for CM7
but the one for CM6 doesn't work with CM6...
Unfortunately I cannot post on development section, otherwise I would have asked him on the right thread http://forum.xda-developers.com/showthread.php?t=653598
Z
Where can i find 2.6.35
Jack_R1 said:
Use 2.6.35 kernels, they're the last for Froyo, if I remember right. Look at the kernel version explanations in iR's thread, you'll see.
Click to expand...
Click to collapse
Im looking for 2.6.35 but i can not find it.
Do you have the location please ?
Im using a gingerbread v20e rom right now and on stock kernel my boot time is about 1 min max, iv recently installed neoblaze and my boot time is over 4 mins.
Can someone give me a list of kernels that will work with my rom so i can find the best one? the search function is pretty useless because without knowing the name of the kernel ill never find it.
Rom: [[ROM] New Rom 2.3.4 GB v20E (24-08-11)
Baseband 0405
GRJ22
Imperticus said:
KERNELS
1. vorkKernel for CM - By Benee & co.
Link : http://forum.xda-developers.com/showthread.php?t=1059910
2. SwiftExtreme for stock/MCR - By fajared
Gingerbread : http://forum.xda-developers.com/showthread.php?t=1264135
Froyo : http://forum.xda-developers.com/showthread.php?t=1223846
3. NeoBlaze for stock/MCR (Froyo and Gingerbread) - By Imperticus
Link : http://forum.xda-developers.com/showthread.php?t=1200726
4. EternityProject Kernel - By kholk
Link : http://forum.xda-developers.com/showthread.php?t=1029799
Click to expand...
Click to collapse
Taken directly from the {Start here} Thread in the dev section. Not sure which of them that will work on v20e. But surely some of them wouldn't mind that you test and maybe report back your experience in each thread.
Cant really think about any other kernels right now ether for that matter.
lintz said:
Taken directly from the {Start here} Thread in the dev section. Not sure which of them that will work on v20e. But surely some of them wouldn't mind that you test and maybe report back your experience in each thread.
Cant really think about any other kernels right now ether for that matter.
Click to expand...
Click to collapse
hmm so just neoblaze and swiftextreme, neoblaze seems to take forever too boot when i have that on my phone but swiftextreme is OC to 1.2ghz on boot...dont like that. Not much to pick from.
Edit that's a rom not the kernel...its impossible to find anything in this forum wheres the thread for the swiftextreme kernel only.
Hmm he have 4 stand alone kernel links but only seems to be oc kernels 2 are 1,2Ghz and the other 2 are 1,4Ghz.
They are at the bottom of each rom ver. Right bellow the rom download link.
Yeah noticed soon after posting they didn't work had to restore a backup.
Seems only neoblaze works with this rom but it causes some unwanted loooooong startups so looks likebill have to stick with the stock kernel till i get a response on that issue.
Sent from my LG-P990 using XDA Premium App
eraldo said:
hmm so just neoblaze and swiftextreme, neoblaze seems to take forever too boot when i have that on my phone but swiftextreme is OC to 1.2ghz on boot...dont like that. Not much to pick from.
Edit that's a rom not the kernel...its impossible to find anything in this forum wheres the thread for the swiftextreme kernel only.
Click to expand...
Click to collapse
CMIIW : swift extreme just for froyo.. on GB you must use swift ROM if you want to use swift extreme kernel..
Hello
I am looking for a kernel compatible with Team ICSSGS RC4.2 rom. I tried Semaphore kernel but the phone reboots randomly and give me a headache. So I am looking for a stable kernel that works good that Team ICS rom. One with BLN and overclock.
Thanks!
eyriiii said:
Hello
I am looking for a kernel compatible with Team ICSSGS RC4.2 rom. I tried Semaphore kernel but the phone reboots randomly and give me a headache. So I am looking for a stable kernel that works good that Team ICS rom. One with BLN and overclock.
Thanks!
Click to expand...
Click to collapse
I used Semaphore ICS 0.9.1 and it was stable no reboots with ICSSGS 4.2
I can not recall if that version has BLN
If you do not want to go back to Semaphore I believe that Devil is another choice
eyriiii said:
Hello
I am looking for a kernel compatible with Team ICSSGS RC4.2 rom. I tried Semaphore kernel but the phone reboots randomly and give me a headache. So I am looking for a stable kernel that works good that Team ICS rom. One with BLN and overclock.
Thanks!
Click to expand...
Click to collapse
Why would you even want one?? Team ICS 4.2 is well outdated, there are much much better ICS Roms out there now. I'll admit it was good when it came out compared to the rest but its not been updated for months so id be checking out the better new roms instead of looking for a kernel for Team ICS
eyriiii said:
Hello
I am looking for a kernel compatible with Team ICSSGS RC4.2 rom. I tried Semaphore kernel but the phone reboots randomly and give me a headache. So I am looking for a stable kernel that works good that Team ICS rom. One with BLN and overclock.
Thanks!
Click to expand...
Click to collapse
Hi,
I used ICSSGS RC 4.2 with Semaphore ICS 1.1.1, and is very stable. Another alternative, which is also very stable the Devil Kernel.
Sten1234 said:
Why would you even want one?? Team ICS 4.2 is well outdated, there are much much better ICS Roms out there now. I'll admit it was good when it came out compared to the rest but its not been updated for months so id be checking out the better new roms instead of looking for a kernel for Team ICS
Click to expand...
Click to collapse
Hello,
If you are looking for a stable ICS ROM Team ICSSGS ins great ans runs absolute stable. Hand as far as I know the devil is working very close with Team ICSSGS and for me it works perfectly.
CU
tenos
Gesendet von meinem GT-I9000 mit Tapatalk 2
Use one of the older semaphore kernels. Team icssgs is a great rom but as it hasn't been updated in a while so there are some issues with the newer kernels. I used 0.9 which was great with this rom.
Sent from my GT-P7500 using Tapatalk 2
i use devil kernel
Just wondering if the Linero Code optimizations would have any impact on the captivate and if so, are any ROMS going to be implementing them?
From what I understand the Linaro optimization is a kernel mod not a rom tweak. With that being said Icy Glitch uses an older version of Linaro and he is looking at updating it to the newest version but had problems downloading the source. AOKP has their default kernel as Icy Glitch so maybe in the next update, but not really sure.
This has been a hot topic after the video of the new optimization that was posted.
That is a bit depressing if true.
It was my understanding that it was an optimization to the operating system itself. I really wish they would clarify these things in articles.
Oh well...
fryboy3k said:
From what I understand the Linaro optimization is a kernel mod not a rom tweak. With that being said Icy Glitch uses an older version of Linaro and he is looking at updating it to the newest version but had problems downloading the source. AOKP has their default kernel as Icy Glitch so maybe in the next update, but not really sure.
This has been a hot topic after the video of the new optimization that was posted.
Click to expand...
Click to collapse
Where did you hear this about glitch?
Sent from my SGH-I897 using XDA
Read the OP for the icy glitch thread under development, it shows 4.4 linaro was used i believe. In the AOKP thread sixstrings replied to a question about linaro.
Sent from my SGH-I897 using XDA
I believe Linaro optimizations is both kernel (toolchain) and rom modifications. Glitch does use a older version of said toolchain and I know that DerTeufel1980 and Stratosk where messing with it. Feed back about the actual kernel optimization has been very mixed. i9k semaphore alot of ppl say its amazing. Other devices say not big difference. All I know we have to be patience and wait until your great devs get it set up (all of it) right and really see if this works
I will try to compile the kernel 3.1.10 for galaxy mini.
I wanted to have a very detailed guide. since they are in the early stages.
[email protected] said:
I will try to compile the kernel 3.1.10 for galaxy mini.
I wanted to have a very detailed guide. since they are in the early stages.
Click to expand...
Click to collapse
good luck, but you only cluttering dev section with that... post "i will do" in general
my computer is suddenly broken, can someone fill this kernle using this config file (do not change the config file) and uplodarlo in men flashable zip so that I can test it?? please file config name
cyanogenmod_tass_defconfig
Good jobs man
GT-S5570 with Forum Runner
Please make it first n try to make sure it working before u create new thread..
many people already say want to make this , make that but
they just keep silent without any news ..
i not judge u but i feel boring when people keep say / ask same thing everyday
and not make some research about it..sorry if i hurt u feeling but as the one of xda dev members , i think i should inform u..
Peace & have a nice day ....
Wtf? U have almost said this in 10-12 post spamming around in all threads!.
Sent from my GT-S5570 using xda premium
What's the point? It's 100% it won't boot. Samsung hasn't released 3.x with changes needed for Mini's drivers... You have to forward port a lot of things.
Yeah it is like try running ics kernel on defy (which have kernel from froyo). That's why i think kernel 2.6.35.14 have some bugs and the 2.6.35.7 doesn't have.
@TheWhisp you tested on Cm10 which kernel is more stable 2.6.35.7 or 2.6.35.14 or you just tested cm10 with the 2.6.35.14?
gabrielking9 said:
Yeah it is like try running ics kernel on defy (which have kernel from froyo). That's why i think kernel 2.6.35.14 have some bugs and the 2.6.35.7 doesn't have.
@TheWhisp you tested on Cm10 which kernel is more stable 2.6.35.7 or 2.6.35.14 or you just tested cm10 with the 2.6.35.14?
Click to expand...
Click to collapse
2.6.35.7 kernel was made by Maclaw, and I don't see the point on restarting a older kernel (they will have to backport the same and probably other things again) as 2.6.35.14 is stable enough.
a 3.0 kernel won't be bad, but look at other Galaxy legacy devices forum (I think it was Galaxy i5500 or something like that), they have been working on a 3.0 kernel for a while and it doesn't even boot, they are making progress, but they have to change a LOT of things (partition scheme is a example, this means it won't be compatible with Odin anymore). It's pointless.
The development of the 3.1.10 kernel release Pottete expect between 15-20 days.
In the meantime, I was wondering, since I am very busy could fill kernel 2.6.37.6 based on this (CM9) http://forum.xda-developers.com/showthread.php?t=1804646 and last config TheWhisp JB in order to have a more updated kernel, also enter toolkit linato When completed please post the kernel of quests theater
If u ar determined to create 3.x.x kernel I suggest u take reference of CYANMOBILE LATEST STABLE kernel its already a version 3.3.3 kernel.
Anindya JV said:
If u ar determined to create 3.x.x kernel I suggest u take reference of CYANMOBILE LATEST STABLE kernel its already a version 3.3.3 kernel.
Click to expand...
Click to collapse
Such kernel does not exist! Squadzone rename his kernel like this when he compiled it. So please don't say something like this. Kernel 3.x.x exist onlt for high end device like gs3 or others.
Sent from my GT-S5570 using xda premium
lightstar3103 said:
Such kernel does not exist! Squadzone rename his kernel like this when he compiled it. So please don't say something like this. Kernel 3.x.x exist onlt for high end device like gs3 or others.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Sorry,I didn't know that.
THANKS FOR THE INFO BY THE WAY.