Related
I want to Flash Team ICSSGS [Android 4.0.3] (Link to ROM Thread) but I am not for sure what Bootloaders or Kernel I need to use.
I currently have:
Firmware Version: 2.2
Baseband Version: I897UCKB1
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
WindRunnerXC said:
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
Click to expand...
Click to collapse
So that ROM I listed in my OP comes with its own Kernel?
And is there a particular Bootloader I should use?
If there is, may you please link me to it?
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
capocaccia said:
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
Click to expand...
Click to collapse
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
froyo will still boot. GB BL are backwards compatible and the ISCSGS script should allow it to flash over any ROM
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
mrnapolean1 said:
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
Click to expand...
Click to collapse
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
gugman said:
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
Click to expand...
Click to collapse
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
gugman said:
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
Click to expand...
Click to collapse
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
capocaccia said:
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
Click to expand...
Click to collapse
i see. okey, thanx a lot again. will be able to flash in about an hour and will let you know
after flashing all went good and phone booted with no problem, except that i don't have a wi-fi, it is connected after typing my password in, wifi icon is on home screen, but could not enter any website or connect to my google account. any ideas?
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
so after flashing that file my phone gives me screen like this
Power Reset or Uknown Upload Mode
and it is stucked. so may i pull the battery off and go to recovery mode again and go back to my previous room? should i perform system format in this case?
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
with keys+power button combination i've been able to exit that screen and reinstalled 4.0.3
do you know safe way how do i go back to SimplyStock KK4 V1.0? should i first flash CornKernel_UCKK4_v603 with odin? but is it safe to do over android 4.0.3?
sorry for bothering you, but i am kind of stucked
---------- Post added at 02:52 AM ---------- Previous post was at 02:33 AM ----------
ok, in the end managed to boot the phone with working wifi but still would like to know how to flash back to SimplyStock KK4 V1.0, just in case ;-) if that won't be problem for you. thank you !!!
IMHO the best way to go from gingerbread to ics 4.0 is to
- in the development section download stock kk4 without bootloaders, unless you dont have them http://forum.xda-developers.com/showthread.php?t=1300843
- then download a kernel of your choice probably cornkernal and put it on your internal sd card
- download ICS latest build and gapps and put them on your internal sd
- oneclick odin the stock kk4, let it boot up completely
- power off and install kernal via odin without aut reset
- boot into recovery, factory/data reset, clean cache, clear dalvik, install latest ics, then install gapps right after,
- reboot system and youre done.
IF you want to go back to your other rom the simplest way is to just kk4 fresh install, install kernal via odin, then isntall your rom.
I always keep all my contacts synced with gmail, and titanium backup any game data or app data i need, and reinstall apps through the market.
hope this helps
capocaccia said:
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
Click to expand...
Click to collapse
Now can I go strait from Froyo to the ROM i listed in my OP?
okey, so at the end i decided to switch Doc's Master ICS and so far so good thank you all again for your support !!!!
mrnapolean1 said:
Now can I go strait from Froyo to the ROM i listed in my OP?
Click to expand...
Click to collapse
I gone ahead and flashed ICS onto my phone. It is working good but the Hang up button does not work. In order to hang up, i have to lock it and unlock it.
Now i did a Backup of Froyo from within CWM. if I do have a problem, can i go to DWM and restore the backed up Froyo?
i have a problem with my galaxy note, i was using isc stunner rom and everything was working fine. My battery got drained and the powered off, so i charged it and turned it on , the phone got stuck on the bootscreen. It does not boot up, so i tried to reflash the same rom but didnt work, i wiped my memory card but no luck. Now whenever i try to flash a rom cwm gets stuck on installing update. Please help me and reply asap!
go to download mode and flash a stock kernel. search in this forum how to do that.
Take out the external SD card
download AbyssNote 4.2 kernel and place it on your external SD Card
Also download the Rom you want to install and put it on your external SD card.
reboot to CWMR
go to install a zip from SD card --> select AbyssNote 4.2 zip and flash it
go back to CWMR's root menu --> advanced --> reboot recovery
you'll find yourself in AbyssNote's Touch Recovery
factory reset --> wipe cache --> wipe dalvik
flash the Rom of your choice
I tried to flash abyssnote kernel but when i flash it the installation is stuck on 'Installing update' and it just stays there and never progresses in any way.
so yeah whenever i flash the kernel im stuck on 'installing update'
any fix for this bros?
You lost root mate..
There is a thread with "Stock Prerooted GB ROMs", go there and download any one and flash it using PC Odin..if flashing with PC Odin succeded but yo0 still get bootloop reboot to recovery and do a factory reset/data wipe, it'll boot without issues
Then go to Chainfire's thread and get the CF Root kernel for the ROM you just flashed, because the prerooted ROMs don't have CWM recovery..fladh that kernel using "already rooted.bat" method described in post #2 in Chainfire's thread..
You'll end up with stock rooted GB and CWM recovery..from there you choose what you eant to do
probably best starting from scratch again and installing a gb from via odin
matius44 said:
You lost root mate..
There is a thread with "Stock Prerooted GB ROMs", go there and download any one and flash it using PC Odin..if flashing with PC Odin succeded but yo0 still get bootloop reboot to recovery and do a factory reset/data wipe, it'll boot without issues
Then go to Chainfire's thread and get the CF Root kernel for the ROM you just flashed, because the prerooted ROMs don't have CWM recovery..fladh that kernel using "already rooted.bat" method described in post #2 in Chainfire's thread..
You'll end up with stock rooted GB and CWM recovery..from there you choose what you eant to do
Click to expand...
Click to collapse
This works and is triangle free too. I did the same to avoid any more flashing/erasing with the potentially dangerous ICS repack kernels.
Links for convenience:
1. Odin flash a prerooted rom from here:
http://forum.xda-developers.com/showthread.php?t=1535025
2. Flash a CF-rooted kernel from here:
http://forum.xda-developers.com/showthread.php?t=1331784
Sent from my GT-N7000 using xda premium
Stuck on boot - please help.
matius44 said:
You lost root mate..
There is a thread with "Stock Prerooted GB ROMs", go there and download any one and flash it using PC Odin..if flashing with PC Odin succeded but yo0 still get bootloop reboot to recovery and do a factory reset/data wipe, it'll boot without issues
Then go to Chainfire's thread and get the CF Root kernel for the ROM you just flashed, because the prerooted ROMs don't have CWM recovery..fladh that kernel using "already rooted.bat" method described in post #2 in Chainfire's thread..
You'll end up with stock rooted GB and CWM recovery..from there you choose what you eant to do
Click to expand...
Click to collapse
I have a similar problem. After installing Stunner ROM on my note, it work for a bit, but then I don't remember what I did, it is now stuck on boot screen. I can't do anything except boot into recovery.
Did I lose root? How exactly can I fix it. I read the post you referred to, but I can't do anything when I execute Odin with my Gnote N7000 connected to my PC. Can you tell me how exactly I have to do? Please provide the exact link for any software I need to download.
Please reply ASAP,
Appreciated.
You have to be in downloadmode to b able to work with PC Odin
( Device off ->Volume down + Home + Power.)
same here but when factory reset,wipe cache and dalvik cache.
all is working fine.
Nirak said:
You have to be in downloadmode to b able to work with PC Odin
( Device off ->Volume down + Home + Power.)
Click to expand...
Click to collapse
Thank you! Yes now I have communication to the phone using Odin! ) But I 'm still trying to figure out what exactly I need to do to get back on stock GB and then go from there (ie. what file(s) I need to flash back to stock GB. My original GB version was 2.3.6). If you know, could you please provide me the link(s) to download those files. I did tried "wipe data/factory reset, wipe cache and dalvik cache" in recovery as the other gentleman suggested but did not work. So I guess I do need to flash back to GB .
Thanks a million
---------- Post added at 08:57 AM ---------- Previous post was at 08:48 AM ----------
Ayush770 said:
same here but when factory reset,wipe cache and dalvik cache.
all is working fine.
Click to expand...
Click to collapse
I tried it (ie. "wipe data/factory reset, wipe cache and dalvik cache" in recovery) but didn't work .
I would try to re-flash it with odin
alinoa said:
I would try to re-flash it with odin
Click to expand...
Click to collapse
The question is what file(s) do I need to re-flash it with? I tried to find the thread "Stock Prerooted GB ROMs" suggested by matius44, but I found a ton of threads related to it that I 'm having a hard time to figure out which is the exact one(s) for my Note.
I was in a boot loop recently. I just flashed a stock GB rom via PC Odin, and reset to factory/wipe cache in stock recovery. Booted up after that. Important part is get GB on there and do the resets. Then you can worry about root, etc.
Geekybiker said:
I was in a boot loop recently. I just flashed a stock GB rom via PC Odin, and reset to factory/wipe cache in stock recovery. Booted up after that. Important part is get GB on there and do the resets. Then you can worry about root, etc.
Click to expand...
Click to collapse
Oh thanks! Can you provide a link where can I find the stock GB rom for my note. I have the Gt-N7000 model and my original GB version was 2.3.6. This is all I remember - can't remember what kernel, baseband etc.
You can flash any stock GB rom you want. Just choose one from dr.ketans thread in development section
Thank you
TY for this granular info.
vincelee007 said:
Oh thanks! Can you provide a link where can I find the stock GB rom for my note. I have the Gt-N7000 model and my original GB version was 2.3.6. This is all I remember - can't remember what kernel, baseband etc.
Click to expand...
Click to collapse
This is the thread with the pre rooted GB roms:
http://forum.xda-developers.com/showthread.php?t=1535025
Though it doesn't really matter which one you choose (as long as it has your preferred language code in it), i can imagine that you want to do it 'the right way'.
Take a look over here to maybe get it more clear for you:
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
The roms mentioned on sammobile are also in this thread:
http://forum.xda-developers.com/showthread.php?t=1424997
this one btw contains much more useful information.
Nirak said:
This is the thread with the pre rooted GB roms:
http://forum.xda-developers.com/showthread.php?t=1535025
Though it doesn't really matter which one you choose (as long as it has your preferred language code in it), i can imagine that you want to do it 'the right way'.
Take a look over here to maybe get it more clear for you:
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
The roms mentioned on sammobile are also in this thread:
http://forum.xda-developers.com/showthread.php?t=1424997
this one btw contains much more useful information.
Click to expand...
Click to collapse
Thank you so much!, bro. Now that I 'm clear I just picked a rom from 'bodivas's post' and re-flashed it back to stock and everything works like a champ now! Just didn't know i could have used any of those - thought I had to match exactly the specific versions of kernel/baseband/country etc. etc.. hahaha.... Next I 'll work on the ICS again. And thanks & credit for everyone who have helped.
Hello,
I'm new at flashing but I recently bought a Samsung Galaxy Note, which already had Stock ICS on it.
Android Version: 4.0.3
Baseband: N7000XXLPT
Kernel: 3.0.15-N7000XXLPY-CL474507
Got brickbug confirmed that I am running a dangerous eMMC chip firmware. I bought this Note from eBay and I'm guessing the previous owner did a reset. It is still working and I had no trouble with it, so I guess I got lucky.
Since I would like to return to a safer kernel and install Paranoid Android I read myself into some threads but would like someone to review what I've gatherd:
Flash save kernel for ICS, for example speedmod kernel with PC Odin.
Device should reboot into ICS with new kernel.
Flash Gingerbread stock ROM for my country (germany) for example this one:
N7000XXKJ4 ------ 2.3.5 2011 october-------- N7000OXAKJ4 ------------------Germany (Debitel)
Device should restart wirh Gingerbread and an old Gingerbread kernel(?)
Root and install CWM using Dr. Ketans guide and batch file.
Follow instructions to install Paranoid Android v0.4 from CWM
I have some questions for this as well:
Speedmod kernel flashes CWM with it. Does that mean it flashes the kernel and the recovery partion, too? As I understood, the CWM works from inside the initramfs, which I thought got flashed with the kernel on the /system partion (or maybe the /boot partion) but not on the /recovery.
Does CWM disapear, when I flash another ROM?
I am pretty sure, that I am running a free (= open) Version of ICS on the phone. When I install a Stock Gingerbread ROM with a Carrier afterwards (like above the Debitel company), do I have to expect weired stuff?
I am running Win 7 64bit, and I would run Odin v1.85 with admin rights. Kies ist installed. Odin found the device, too.
Thanks in advance,
gador
Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.
azzledazzle said:
Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.
Click to expand...
Click to collapse
So I guess, I can go ahead and they're no fatal flaws in my procedure?
(And flashing stock ROMS overrides /recovery as well?)
Check the videos in ky sig once
Just to be safe
Erm, All ROMs are different so double check in the OP but you wont lose CWM if you switch between custom ROMs, Only a full firmware flash via ODIN will replace recovery. However there are many variations of CWM, All however do the same job
the instructions above are correct, But seem to be a more complicated way of doing it, It says to flash a safe ICS kernel, THEN flash GB ROM in ODIN ??? That makes no sense.
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !
azzledazzle said:
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !
Click to expand...
Click to collapse
would it then be necessary at all to install the SpeedMod kernel? I included it above to make sure, the kernel is safe, but when the Gingerbread Stock ROM overrides the kernel, do I have to flash the kernel afterwards?
I suggest you stay stock and dont do any factory reset or data wipe.
Then READ and read a LOT of the topics here.
All these suggestions of flashing this and that comes with a risk. And it does not mean that if it works for others will work the same way for you.
Sent from my GT-N7000 using xda app-developers app
Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN
azzledazzle said:
Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN
Click to expand...
Click to collapse
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2
mrcarlxx said:
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'd say no. I mean, as I understand it, you're flashing the device in download mode. There is no need for a root user.
So, against my inner "good angel", who told me to wait for a new official firmware release, I went ahead and flashed away.
It all worked and here is what I did:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restarted and got lots of force close issues.
Flashed the Gingerbread Kernel SpeedMod from here ("speedmod-kernel-n7000-k2-12-Odin.tar")
Rebooted, continued to have force close issues.
Rebooted into Recovery (which is now CWM, due to Kernel update)
Wiped cache, dalvik cache and did a factory reset
Rebooted into a fully working Gingerbread OS
Placed PA v0.4 and GApps onto my SD Card (from here)
Rebooted into CWM Recovery
Applied PA v0.4 from SD-Card
Applied GApps from SD-Card
Wiped Dalvik Cache, Cache and did a factory reset
Rebooted into a workind Paranoid Android OS.
Although the SpeedMod Kernel got overridden by PA, I still have CWM Recovery.
Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(
mrcarlxx said:
Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(
Click to expand...
Click to collapse
Well, the SpeedMod Kernel not only gave me CWM, but also root. According to PA Thread Install instructions, you would need to root your device prior to installing PA.
Yes, after flashing the SpeedMod Kernel, I got the yellow triangle, but since I bought this phone on eBay, without any bill to confirm warranty, I didn't really care about it.
I did not get a yellow triangle after flashing the official Stock ROM!
So I would hazzard to guess that this would not void warrany. (Also, in Download Mode, there was the little text saying: "Custom Binary: No" after flashing the Stock Gingerbread ROM)
So, if I were concerned about warrany, I would have a second look at Dr. Ketans guide, which describes the CWM+Root procedure without increasing the binary counter (at least I think so).
This way, you could get root and CWM after flashing to Stock Gingerbread.
I just had the problem, that Gingerbread wouldn't allow me to go into the Settings Tab to activate Debbuging, which you will need for Dr. Ketans method. (All processes were getting force closed)
If it is possible to wipe the caches and factory reset the phone with stock recovery, I think it would work. It should look like this then:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restart to Recovery. Wipe Dalvik Cache, Cache and do a factory reset (You just flashed Gingerbread Stock, which should have given you a safer kernel)
Restart
Activate USB Debugging and untrusted sources.
Follow Dr. Ketans Guide on how to Root+ get CWM
Continue from step 8 above.
Since I consider myself a complete noob to the flashing business, someone should propably confirm, what I've just written. I wanted to be on the safe side and therefore flashed a known safe kernel again over Gingerbread, just to be sure (and to get root+CWM)
Hope that helped.
Well mine didn't :-(
I'm now cursing after my planned upgrade failed :-( I'm stuck at the yellow triangle boot screen wondering what to do
My sequence was
a) Unpack SGN, and it upgraded to ICS
b) read about all the dire warnings on ICS - and curse!
c) figure out how to flash speedmod and get root via the temp CWM - and I was pretty happy about this for a few days..
d) battery life seemed poor - so I wondered if the Abyss kernel would help
e) Went into Recovery - which appeared to be CWM (volume & on/off to navigate) and flashed the Abyss kernel and performed a wipe (assured that my SGN was safe with speedmod)
f) Now stuck at the yellow triangle boot screen - wondering what to do?
My recovery seems to be the touch screen version now - when I can get into it.
Suggestions please?
(My old nexus One wasn't this tricky!)
---------- Post added at 10:25 PM ---------- Previous post was at 10:02 PM ----------
Wll I reflashed speedmod with Odin - and at least it looks like its booting!... anxious minutes later.... well I/m back. I don't know what i did wrong - but |I don't want to repeat that in a hurry.
I'll wait for CM9 to come out with an approved kernel before messing further!
Update: Solved
Thank you for everyone's reply and help.
What worked for me:
Downloaded Mobile ODIN v3.10
Downloaded Goku v1.5-10 TAR (Kernel-Goku-V1.5-10.tar)
Flashed firmware with Mobile Odin with MD5 signature check
Can now boot into recovery
Currently on:
CM9 Version 9-20120515-Nightly-n7000
Build date Tue May 15 23:06:26
Kernel version 3.0.30-CM-q6804ca8
I cant seem to get into recovery while using any of the ICS roms. I've tried several CM9 bulds, Kindgroid, Stunner and a few others. I doesn't matter if i try to access it through the hardware keys (press and hold the Volume UP+Home+Power) or through one of the software options (reboot into recovery). After the samsung logo apears the screen will turn black. I'll have to restart the phone with the power key.
Everything else seems to be fine. I can get into download mode just fine. I have no problems downgrading to a gingerbread rom from pc odin or mobile odin. Also theirs no problem for me getting into recovery from any of the gingerbread roms I've tried.
I first noticed this while I was on ICS stunner. It was the build with the affected kernel. Everything was running smooth for me. Recovery and everything else seemed to be working fine but when i started reading posts about the brick scare i became afraid of doing anything else on that kernel.
I followed Entropy512's advise:
If you are running an affected kernel:
STOP USING IT IMMEDIATELY. FLASH A SAFE KERNEL USING ODIN/HEIMDALL.
DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
I flashed his DAFUQ releas using mobile odin while still on stunner. Everything seemed to go smooth. After flashing I checked under setting -> about phone -> kernal version and his kernel was properly displayed. I tried going into recovery but the screen would turn black after the samsung logo.
I've must of done something wrong while flashing Entropy512's kernel because ever since I flashed his kernel I havent been able to get into recovery while running an ICS rom.
TL;DR
Cant access recovery from ICS roms but recovery works fine while on gingerbread roms
Did you try before flashing ics do a 3 wipes first while in girgerbread for a clean installation?
jonpaslim said:
Did you try before flashing ics do a 3 wipes first while in girgerbread for a clean installation?
Click to expand...
Click to collapse
Yeah it was one of the 1st things I tried when I encountered the problem.
Can anyone confirm if the recovery is stored in the same place for both ics and gingerbread? I feel like I might have damaged some sectors and might have some bad blocks. Everything else seems fine though.
runnin4mayor said:
Yeah it was one of the 1st things I tried when I encountered the problem.
Can anyone confirm if the recovery is stored in the same place for both ics and gingerbread? I feel like I might have damaged some sectors and might have some bad blocks. Everything else seems fine though.
Click to expand...
Click to collapse
How about 4 wipes including format/system and also use jbroid even though your not installing a kernel but rom still use it.
Flash stock GB rom. Reroot it and then check everything is working fine? If yes then flash ICS rom.
Sent from my GT-N7000 using XDA Premium App
Thanks for everyone's reply
I've tried jbroid and formatted system but it didnt help. Like I said... everything is fine on GB, recovery and everything else. I've been back and forth several times already. Everything seems to be working fine on ICS too. I just can't access recovery no matter what I do while on ICS. I'll try wiping 4 times from gingerbread this time.
runnin4mayor said:
Thanks for everyone's reply
I've tried jbroid and formatted system but it didnt help. Like I said... everything is fine on GB, recovery and everything else. I've been back and forth several times already. Everything seems to be working fine on ICS too. I just can't access recovery no matter what I do while on ICS. I'll try wiping 4 times from gingerbread this time.
Click to expand...
Click to collapse
In the system setting of the phone there is back up and reset and there you can format usb storage, this will format your internal sd, this is in ics setting i forgot about gingerbread. You can do this while in gingerbread to be safe, format your internal sd.
jonpaslim said:
In the system setting of the phone there is back up and reset and there you can format usb storage, this will format your internal sd, this is in ics setting i forgot about gingerbread. You can do this while in gingerbread to be safe, format your internal sd.
Click to expand...
Click to collapse
Yes.. I've tried that before installing my current ICS rom. Actually I formatted both the internal and external SD while still on GB. I'm still wondering if the recovery stored in the same partition space in both GB and ICS. I can't understand why I can access CWM recovery on GB but not while I'm on ICS.
i too have the same problem even though i can access cwm manually cant install any zip file but if i use abyssnote kernell everything works fine the problem started when switched over to ics from gb
runnin4mayor said:
Thanks for everyone's reply
I've tried jbroid and formatted system but it didnt help. Like I said... everything is fine on GB, recovery and everything else. I've been back and forth several times already. Everything seems to be working fine on ICS too. I just can't access recovery no matter what I do while on ICS. I'll try wiping 4 times from gingerbread this time.
Click to expand...
Click to collapse
Wiping more than once is pointless... I don't know where people get silly ideas like "wipe 3 times".
When you switched to something else, did you flash it using CWM or Odin?
Try flashing a different kernel using Odin. I have seen that in rare cases on some devices, doing something like the following:
Flash one kernel from a recovery
Reboot directly to recovery using CWM's Advanced menu
At this point, the device will be stuck either always booting to recovery or never booting to recovery
Flashing a kernel with Odin/Heimdall - NOT "Mobile Odin" (I hate that name because it's completely different from Odin) or CWM often breaks these loops.
problem accessing recovery
hi today i solved my problem of not unable to find cwm in programs and flashing zip files from recovery while on ics. first i flashed abyssnote kernell then rebooted into recovery did all the three wipes and in addition formatted data, system and cache. then used jbroid kernell cleaner. installed fusion rom flashed green theme rebooted at last could see cwm in programs can flash any zip file now
Thank you sir for your swift action.
deepalakshmidas said:
hi today i solved my problem of not unable to find cwm in programs and flashing zip files from recovery while on ics. first i flashed abyssnote kernell then rebooted into recovery did all the three wipes and in addition formatted data, system and cache. then used jbroid kernell cleaner. installed fusion rom flashed green theme rebooted at last could see cwm in programs can flash any zip file now
Click to expand...
Click to collapse
How did you flash abyssnote kernel without being able to enter recovery?
Edit: Solved my problem. Updated 1st post
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
can you try go back to stock GB rom.. then upgrade to ICS and root using Dr Ketans method and then install Hydracore
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
jeetu1981 said:
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
Click to expand...
Click to collapse
Hot damn you guys are quick!
Silly me! :silly:
If I install any GB kernal can I then install CM10?
S-pen said:
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Alba Donzo said:
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
S-pen said:
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
Click to expand...
Click to collapse
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
So the official CM10 kernel is a gb kernel? Because remember that is what I'm currently on.
And just to make sure I got you... wipe everything, install kernel (I don't understand what you mean by "go straight to rom flash"), but then not "reboot system", instead "reboot to recovery", then install CM10 rom?
Also, when you say a "full wipe" do you mean that it will erase everything like a factory reset and delete all my apps and everything else? And is there anyway to install CM10 without doing this or is that the only way?
Cm10 kernel is a jelly bean kernel, so gb rom will not run under it.
Full wipe does mean erasing everything. Coming from gb, there is no other way to install, you need a full wipe, remember, you're updating two full revisions of the os, so it's not surprising a full wipe is needed. If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Sent from my GT-N7000 using xda premium
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Click to expand...
Click to collapse
How original was that....
Sent from my GT-N7000 using xda premium
SpyderTracks said:
If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Click to expand...
Click to collapse
Once again, my phone is already rooted... I have mentioned this several times.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
Click to expand...
Click to collapse
You telling me that I can safely go straight to JB from my current GB rom and kernel?
I already have a "nightly" JB rom on my SD card, so just to be clear, all I do is go into CWM recovery, do a "full" wipe (how do I do that by the way?) and install the JB rom from zip?
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
AA1973 said:
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
Click to expand...
Click to collapse
Great! I am downloading the GApps for JB now. How do I install them? I understand that this is also done through CWM recovery, but how do I instal them? do I install the JB rom and reboot to recovery and then just install GApps from zip before rebooting system?
Also, does the full wipe have to be done in CWM recovery, or can I just do the normal wipe on the phone menu before entering recovery?
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
AA1973 said:
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
Click to expand...
Click to collapse
OK install ROM and then install GApps straight away, got it.
Just about the wipe, is it a simple one button wipe that wipes everything, or are there several things that I have to wipe independently? This is the part I'm not too sure about.
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
AA1973 said:
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
Click to expand...
Click to collapse
That's fine. I'll go into recovery and have a look. Thanks for the help that you did give anyway.
It worked! I have been messing around with my new Note on Jellybean and looking through all the settings. It doesn't have project butter (or at least the project wasn't very successful), but still miles ahead of Touchwiz.
Just want to extend a big thanks to everyone that has helped me out. Much appreciated.