Related
Hey guys, I got an email on my nook the other day, and when I picked it up, I didn't realize I still had it plugged into the charger, so I accidentally yanked it and broke the B&N micro SD cable.
I'm running phiremod, so normally this isn't a problem since I can slow-charge from my PC or car adapter.
The only problem is, charging like this only works once you've loaded the CM kernel. If you try to charge from a dead battery, you can't do that!
Right now, my nook color is dead. I can plug it in and I get the "not enough power to turn on, please wait 15 minutes and try again" message.
My question is, is there any way to charge this sucker (from death) without shelling out another $25 for the charger (and all I need is the cable, but they are almost just as much).
I have it plugged into my PC currently, and it has been plugged in for about an hour, but it still won't power on. If I leave it plugged into the B&N charger with a regular microUSB cable (even all night) it won't charge a drop.
Any suggestions?
Edit:
FWIW, my nook DID turn on after about an hour - an hour and a half of charging with 11% battery and continues to charge via the PC with a regular microUSB cable. It takes a while, but it will charge
Its good that it started working again. I know some things need to use an official charger to come from the dead. If you wanted to see if you could make it charge faster, (both from dead and regularly) you could try a different USB to wall adapter with higher wattage/amperage. Think iPad, XOOM, or Atrix (all high power-draw devices) charger...
Sent from my MB860 using XDA App
Higher amperage will help...but the magic is in those extra long connectors on the stock cable..to fast charge you will prolly need to get a new one.
Just a friendly PSA: lithium ion batteries should not be deep discharged.
I'm going to need a new cable pretty soon. The end that plugs into the Nook has been cracking and falling apart. I'm guessing I'd have to get it direct from B&N?
d00med said:
I'm going to need a new cable pretty soon. The end that plugs into the Nook has been cracking and falling apart. I'm guessing I'd have to get it direct from B&N?
Click to expand...
Click to collapse
You could try this one:
http://cgi.ebay.com/Barnes-Noble-No...?pt=US_Tablet_Accessories&hash=item2eb48a16e6
Just wanted to add: I've been able to bypass the low battery screen. Pop in a bootable Clockwork SD, then plug into the power source. If there's enough power you'll get into recovery. Swap back to your usual SD, and select the reboot option from inside recovery. It'll boot straight into the OS, bypassing the low battery warning.
Sent from my Nook Color!
Call B&N tech support and tell them that you have a bad USB cable. I did, and they sent me a new charger+cable within a week, gratis. YMMV.
i got one at best buy $14.95 OEM
The stock B&N charger is 2 amps (or 2000 milliamps) so any charger with less than that will take longer to charge. USB only supplies .5 amps so takes a lot longer to charge.
The ebay link above is a 1 amp charger.
I had the same thing happen to my Nook, and I've been fairly regular at the local brick and mortar B&N the last month or two (1 hour book read and various purchases and stuff).
So I took the cable in and showed it to them. They took that one and handed me a new cable. 'tis my suspicion that it's a fairly common occurrence with the sample units.
Worst you can do is ask.
d00med said:
I'm going to need a new cable pretty soon. The end that plugs into the Nook has been cracking and falling apart. I'm guessing I'd have to get it direct from B&N?
Click to expand...
Click to collapse
Mine was doing the same thing. Chunks were falling off the end that plugs into the Nook. I took it into my local store and they simply handed me a new one. Claimed it was the first time they'd seen one like that...
byronczimmer said:
I had the same thing happen to my Nook, and I've been fairly regular at the local brick and mortar B&N the last month or two (1 hour book read and various purchases and stuff).
So I took the cable in and showed it to them. They took that one and handed me a new cable. 'tis my suspicion that it's a fairly common occurrence with the sample units.
Worst you can do is ask.
Click to expand...
Click to collapse
I had a really great experience with brick and mortar bn staff. One guy cracked open a new charger and cord and just said to stop by if evertth wasn't totally fixed. I left and now I even have an extra charger!
BN staff = win!
Sent from my ADR6300 using XDA Premium App
Odd, the associate I spoke with said there were issues with some of the cords shipped with the early batches.
Sent from my ADR6300 using XDA Premium App
RickOSidhe said:
Call B&N tech support and tell them that you have a bad USB cable. I did, and they sent me a new charger+cable within a week, gratis. YMMV.
Click to expand...
Click to collapse
I did the same thing and they sent for free no questions asked.
Bought my nook used off craigslist. Called in and got a replacement cable no problem.
cmstlist said:
Just wanted to add: I've been able to bypass the low battery screen. Pop in a bootable Clockwork SD, then plug into the power source. If there's enough power you'll get into recovery. Swap back to your usual SD, and select the reboot option from inside recovery. It'll boot straight into the OS, bypassing the low battery warning.
Sent from my Nook Color!
Click to expand...
Click to collapse
ive been struggling with this for a few days since this whole battery issues have been going around with the late CM 82 nightlys... well. i wanted to make sure that my nook wasnt toast. (i have 3 and 3 different chargers and cables all OEM all new) so just last night right before the "fix" was merged into nightly 91/93.... ill be damned if i didnt do exactly what you said and managed to suck enuff juice out to boot off SD into recovery... however... i thought problem was solved and i let it sit in recovery (plugged into wall) but had i known what i known now... it WONT charge without the CM kernel installed. Now i think i managed to "brick" an unbrickable device. does this make any sense? im not good with words i guess.. but anyway... there isnt enough juice to even get to the "connect charger screen" hell... i bet most people dont know theres actually ANOTHER "connect your damn charge dummy!!!" screen that comes up after the one that says try again in 15 minutes lol. so ya... been sitting on each of my chargers for at least an hour each hoping to get some juice out ... and its a no go. o well.. i got 2 others... but dammit i had that one JUST the way i wanted it. idk why i even went to .32 kernel... it was a nightmare from first boot. (no i did not revert to stock rom first as i hear is what does the trick)
cmstlist said:
Just wanted to add: I've been able to bypass the low battery screen. Pop in a bootable Clockwork SD, then plug into the power source. If there's enough power you'll get into recovery. Swap back to your usual SD, and select the reboot option from inside recovery. It'll boot straight into the OS, bypassing the low battery warning.
Sent from my Nook Color!
Click to expand...
Click to collapse
ive been struggling with this for a few days since this whole battery issues have been going around with the late CM 82 nightlys... well. i wanted to make sure that my nook wasnt toast. (i have 3 and 3 different chargers and cables all OEM all new) so just last night right before the "fix" was merged into nightly 91/93.... ill be damned if i didnt do exactly what you said and managed to suck enuff juice out to boot off SD into recovery... however... i thought problem was solved and i let it sit in recovery (plugged into wall) but had i known what i known now... it WONT charge without the CM kernel installed. Now i think i managed to "brick" an unbrickable device. does this make any sense? im not good with words i guess.. but anyway... there isnt enough juice to even get to the "connect charger screen" hell... i bet most people dont know theres actually ANOTHER "connect your damn charge dummy!!!" screen that comes up after the one that says try again in 15 minutes lol. so ya... been sitting on each of my chargers for at least an hour each hoping to get some juice out ... and its a no go. o well.. i got 2 others... but dammit i had that one JUST the way i wanted it. idk why i even went to .32 kernel... it was a nightmare from first boot. (no i did not revert to stock rom first as i hear is what does the trick)
maybe i should post a warning thread to others to MAKE SURE BATTERY DOES NOT DRAIN COMPLETELY OUT BETWEEN WIPING AND FLASHING FIXED rom.... cuz your nook will NOT charge...... side note... does anyone have any suggestions as far as like a higher rated charger that may force a charge or soemthing? im no electrical engineer so if thats sounds dumb... it prob is. lol
Can you damage a device using higher amperage chargers than supplied with the device (i.e. using nook charger at 2 amps to charge cell phone supplied with 0.7 amp charger)?
wbrands said:
Can you damage a device using higher amperage chargers than supplied with the device (i.e. using nook charger at 2 amps to charge cell phone supplied with 0.7 amp charger)?
Click to expand...
Click to collapse
The tip of the Nook charger won't fit into a standard micro-USB port.
But if you plug a standard micro-USB cable into the Nook wall charger piece, I believe the USB power protocol will automatically modulate down to the highest the device can accept.
Well basically, ive read about mintyboost and stuff like that, but what im wondering is... Can i build one SPECIFICALLY for my captivate? eg, cutting up the USB and soldering wires?
I found a 4 (AA) battery holder just yesterday, and ive been thinking of what to do with it. What other parts/pieces would i need to pick up in order to build this? Is it exactly the same as minty boost with the exception or the usb port?
Please let me know Thanks!
I'm working on this right now. Going to go 4xAA batteries (unless we find some fun LiPo pack on ebay or something we like better, I happen to have a bunch of NiMH AA's right now), and we'll be shorting out pins 2-3 in the female USB to try to force AC mode from the pack. We'll be going into an altoids tin, hopefully. We may, also, go with 5xAA's just to make sure peak voltage stays high enough for long enough, space inside the can will be an issue. I suppose we could actually put two OEM Captivate batteries in there, they'll fit just fine...hmm.
The first version won't allow the batteries to charge from USB, the second version probably will.
When we do it, I'll take pics and schematics and whatnot. The only trick is that the captivate, as far as I understand it, wants 5v at 500mAh to USB-charge or 750mAh w/ pins 2&3 shorted for AC (fast) mode. Again, the final product should also be able to exceed 1500mAh total capacity (the captivate battery capacity), which won't be an issue with high-capacity AA's in place. We will may only get 1-1.5 full charges, but for me it's an "emergency backup" kind of thing, and if we can actually trick it into AC mode, we'll be smooth sailing.
Sounds interesting, good luck on the progress
Sent from my SGH-I897 using XDA App
Minty Boost!
Yeah tommelee! Keep us updated im sure wed all like to know about it.
And as for mintyboost, i like the idea, but i dont want to keep plugging in a USB cable. I just want it to be specifically for the cappy
I came across the following charging stand for the HTC Flyer. What do you think? Would this work with our Nook Colors?
http://cgi.ebay.com/USB-Base-Dock-C...ccessories&hash=item3f0be99c32#ht_2900wt_1375
Well, it might connect but won't give you the fast charging ability of the stock nook cable (which has additional connections for the 3-4 hour rapid charge). Provided that you connected to a 2 amp source, you might get a charge after 8 hours or so, and if you had a 1 amp charge, _IF_ your screen was off perhaps after another few hours (12?).
Phatdawg said:
Well, it might connect but won't give you the fast charging ability of the stock nook cable (which has additional connections for the 3-4 hour rapid charge). Provided that you connected to a 2 amp source, you might get a charge after 8 hours or so, and if you had a 1 amp charge, _IF_ your screen was off perhaps after another few hours (12?).
Click to expand...
Click to collapse
This might actually have fast charge, thank to it being for the Flyer and all. I think this stand would work, but I have no idea how far that micro usb comes up from the bottom. Hate to have you set your Nook down and break it off or something.
Well I took a chance and ordered one from some store in Hong Kong. Will be here in a few weeks and will let you know if it works out!
igolfchip said:
Well I took a chance and ordered one from some store in Hong Kong. Will be here in a few weeks and will let you know if it works out!
Click to expand...
Click to collapse
THat does look really nice. If it works out igolfchip, please let us know!
Nburnes said:
This might actually have fast charge, thank to it being for the Flyer and all. I think this stand would work, but I have no idea how far that micro usb comes up from the bottom. Hate to have you set your Nook down and break it off or something.
Click to expand...
Click to collapse
Well, just to give you some idea of my tests.
Stock charger + cable = 3-4 hours
Stock cable + 3rd party 2amp brick = 7-8 hours.
From that picture it looks like a universal mini usb attachment. I doubt it will give the 3-4 hour charge. It probably will be a 2amp source though.
Phatdawg said:
Well, just to give you some idea of my tests.
Stock charger + cable = 3-4 hours
Stock cable + 3rd party 2amp brick = 7-8 hours.
From that picture it looks like a universal mini usb attachment. I doubt it will give the 3-4 hour charge. It probably will be a 2amp source though.
Click to expand...
Click to collapse
Maybe combine it with this: http://cgi.ebay.com/Barnes-Noble-Nook-Color-filter-plug-USB-charger-/190521989603#ht_3030wt_1163
I haven't tried it, but it would be quite nice if it work.
That might work, I don't know of anyone who's willing to try it out for 7 bux tho.
Phatdawg said:
That might work, I don't know of anyone who's willing to try it out for 7 bux tho.
Click to expand...
Click to collapse
This guy did: http://forum.xda-developers.com/showpost.php?p=13730222&postcount=32 but didn't comment on his/her experience.
That would still mean you need the proprietary cable tho, and that's what keeps on breaking.
I wish a cheap 3rd party manufacturer would pick this item up...I wonder if monoprice would consider making them, or if they are protected by patent and unable to be reproduced because of it.
Phatdawg said:
That would still mean you need the proprietary cable tho, and that's what keeps on breaking.
I wish a cheap 3rd party manufacturer would pick this item up...I wonder if monoprice would consider making them, or if they are protected by patent and unable to be reproduced because of it.
Click to expand...
Click to collapse
Yeah I know what you mean. Just had to call for a replacement today myself.
Probably is a patent issue, but that doesn't stop many manufacturers in China from making cables for Apple products, so I'm sure it's just a matter of time.
EDIT: Not to go too off topic here but I found these three on eBay, all of which state fast charging. Anyone tried them?
http://cgi.ebay.com/2x-Home-AC-Char...Accessories&hash=item4840fd2d20#ht_1417wt_905
http://cgi.ebay.com/Barnes-and-NooK...ccessories&hash=item20bb08ebc0#ht_2022wt_1139
http://cgi.ebay.com/USB-Home-Wall-A...ccessories&hash=item1c1d5bed4a#ht_4300wt_1727
Phatdawg said:
Well, it might connect but won't give you the fast charging ability of the stock nook cable (which has additional connections for the 3-4 hour rapid charge). Provided that you connected to a 2 amp source, you might get a charge after 8 hours or so, and if you had a 1 amp charge, _IF_ your screen was off perhaps after another few hours (12?).
Click to expand...
Click to collapse
So, I tend to charge my devices overnight, so 2 hours or 6-8 hours really doesn't usually matter to me.
I see this dock as being a neat way to use the device at my desk (twitter feed, play music, etc...) as well as a stand to charge with.
Some folks have mentioned that standard MicroSD's don't charge the nook. I have used many different charging cables for my Samsung Captivate and found that the nook charges (and never complained about the time to charge).
Also, I checked out the Flyer at my local Best Buy store. The Flyer has a proprietary connector that is a modified MicroUSB connector. However, a standard MicroUSB also works. Looking at this item, seems that the stand from HK uses standard MicroUSB.
I'm guessing that the biggest issue I could come up with is 'fit' of the nook in this stand. Specifically, do I need to modify the stand so the back of the nook sits flush against the stand and doesn't put too much stress on the USB connector (assuming there's some space between the nook and the stand).
Any update on this?
Sent from my Droid using XDA Premium App
Just got it in the mail - I'd rate it an 8 out of 10.
Will post pics soon, but first impressions:
- Looks really good, blue indicator light when connected / Charging
- Hard to first figure out alignment, then it gets easy
- Fit:
- A little extra room between the back and the stand, not much wobble. Could always use tape or something to close the gap
- A little wiggle between the bottom edge and the stand. Again, some kind of black padded tape would easily resolve and look good. Not sure if I will event attempt as not a hassle yet
No idea on charging times, never been an issue for me as I'll use this:
1) At my desk (put a twitter feed or music on)
2) Overnight charging (3 hours or 6 hours don't really matter to me)
Again, pics to come soon!
Thanks keep us posted.
Does it hold the nook in landscape? I know it wont charge, but curious to know if its capable with the micro USB being there. Maybe add a pic with it in landscape as well.
Thanks
Sent from my Droid using XDA Premium App
Landscape is not advised.... If you can balance the device on there, will scratch up your nook.
Sounds like a good option. Can't wait fto see those pics.
That's excellent news. Can't wait to see the pictures. If you can get an estimated charge time as well, that would be excellent.
Sent from my NOOKcolor using XDA App
I'm excited to see some pictures whenever they get posted, this looks like a good deal.
Add me to the list of those eager for pictures...
Arg.
So my otherwise adorable 1 year old somehow got his hands on my Captivate this weekend. When we finally caught him, he was chewing and slobbering on it pretty much right where the USB port is. After getting the phone back out of his grubby little hands, my wife and I took it completely apart and have had the whole works soaking in rice for a day or so.
When I put it back together, it booted just fine, and everything seems to be in working order. Except...when I plug a cable into the USB port, it doesn't charge, and it doesn't connect to my computer for storage mounting/flashing. This would be a bit of a problem.
I've checked for obstructions in the port itself and there don't seem to be any. I can get by for now without charging because my wife and I have the same phone (so we can periodically swap batteries...), but she's leaving town for two weeks at the end of this week. I really don't want to have to buy a new phone...so any ideas on fixing this would be greatly appreciated.
Sent via Captivate (powered by CyanogenMOD)
Once the USB port is gone its gone, you would need to get an external wall charger for it and a wifi file browser.
there might be some moister in it yet, but generally the captivates had issues with the USB port just flaking out like that. Its a common problem for this phone, and also has happened to mine.
Or you can just pay ~35$ to get it fixed, look in my sig. They are good!
b-eock said:
Or you can just pay ~35$ to get it fixed, look in my sig. They are good!
Click to expand...
Click to collapse
Hmm...I didn't even realize that was an option. I'll be looking into that. Thanks!
They fixed mine and it works great. I would also order a new cable from them for like 7 bucks. It is all well worth it!
interesting, didnt know about that one either
Update:
It's apparently not *quite* as dead as I thought. It's still not recognizing my computer or telling me that it's charging...but apparently it is actually charging my battery. I plugged it into my computer just to see and left it. It never said that the phone is charging, but when I came back a few minutes later the battery meter had gone up, and it's still doing that fairly consistently.
That's at least good news for now. Even if the USB transfer is dead, I'm still OK as long as I can charge. As long as I don't have to use download mode...
That sounds like a bad cable, just buy one of those first, cheaper and easier to check!
b-eock said:
That sounds like a bad cable, just buy one of those first, cheaper and easier to check!
Click to expand...
Click to collapse
It's nothing to do with the cable. We have four USB cables and two different car chargers. It's the same thing with all of them, and they all work perfectly on my wife's phone.
Sent via Captivate (powered by CyanogenMOD)
My first Captivate had a USB port go bad.. I tried 10 different cables and decided for some reason it was a ROM issue and got into download mode.. well let's just say I was buying another Captivate the next day.. lol
I did resurrect it by buying a Captivate with a broken screen on Ebay cheap. Combined the two and it's actually a later production and the GPS works good compared to hardly at all before. M yold screen and new guts.. Now I have a spare phone to try new Roms on without messing up my daily driver.. (Dark Knight 4 atm)
I see broke screen Captivates for $40-80 on Ebay regularly..
My wife also has a captivate with a dead USB port. So I went on amazon and searched for captivate batteries and external charger and found a package that came with 2 extended life batteries and the wall charger that charges one separatly from the phone while you use the other in the phine . Its made by Laza wireless and both batteries and charger was 15.99 and shipped free. Got it in two days and works great and was a whole lot cheaper than a phone.
Sent from my SAMSUNG-SGH-I727 using XDA
Sorry to resurrect such an old thread but, I have had the same problem for months also caused by a toddler sucking on the phone and cables. I swap batteries daily. stock/1800/2430 mah. I am curious if anyone knows of a wireless charging option. I know my wii batteries are inductive and it is just the new battery and charger on a stock remote. is there an inductive charger and battery available for cappy? is wireless charging dangerous to the phone if it wasnt designed with it in mind? for that matter is anything available for anyother phones besides the lumia 920 and maybe nexus I think?
cheapest, best option is to get the USB port repaired by mobiletechvideos.com, imho.
I know of no induction solution for captivate that works without a good usb port.
I figured and also thought the Cappy wouldn't be a device supported by a new battery developer when there is so many newer ones out.
Thx
Sent from my SGH-I897 using xda app-developers app
My dock has been charging my phone perfectly for weeks, the other day I came in and plopped the phone on the dock and nothing.
I checked the pogo pins (of the dock) with a multimeter, they are working. I've tried different power sources for the dock as well (wall adapter, pc, other cables).
I've checked to make sure the pins are making contact with the phone, good solid contact.
I haven't changed anything on the phone recently, any suggestions?
The phone charges fine through USB.
[ANSWERED]
since i apparently posted this on the apple forums instead of xda, all the replies were "shoulda bought apple products"
so anyone having this problem, i solved it by reinstalling a nand backup. apparently it was a software issue. hopefully this saves you from the apple fanboys.
do you have original sony cradle? i had chinese replica and it did not work all times.
glukasil said:
do you have original sony cradle? i had chinese replica and it did not work all times.
Click to expand...
Click to collapse
No, I was too impatient for it and got the goosewhite dock, besides I like the looks of it better tbh. The dock is putting out power, I don't get why it's not charging. its not a complex system at all.
Get the Sony one if you don't want the same issue occurring.
Sent from my C6603 using xda premium
why would changing the dock have anything to do with the problem? when voltage is applied to the pogo pins, the phone does not charge. how would changing the dock i use make a difference in that at all?
i would understand if the pogo pins were putting out less power or no power, but they put in exactly the amount of power going into the dock, they make good solid contact, i've check continuity and its making a solid connection...
Then take the dock apart and see if anything got loose
Sent from my C6603 using xda premium
Rajinn said:
why would changing the dock have anything to do with the problem?
Click to expand...
Click to collapse
Because the one you've bought is rubbish!
I brought this as an alternative to the Sony DK26 because I was sick of opening the flap everytime I wanted to charge my phone. It does fit the Xperia Z and looks nice enough. It also activates the dock mode and the Xperia's smart connect function. This is why I gave it 1 star. HOWEVER, it outputs at 500mA as opposed to the 1800mA delivered by the Sony dock. This means it charges your phone incredibly slowly. I had my phone on the dock charging for 11 Hours and it managed to deliver a battery charge of just 51% which is ridiculous compared to the Sony charger which delivers a 100% charge in 2 hours.
Click to expand...
Click to collapse
- Review
XperienceD said:
Because the one you've bought is rubbish!
- Review
Click to expand...
Click to collapse
+1
I do not get why would anyone go for something cheaper and unreliable. Its like those iPhone users buying cheap non original cables to charge their iPhones, ended up causing the phone to blow up or messed up and blames it on Apple.
and yes you are the owner of the phone and you have the right to buy whatever 3rd party equipment for your phone, but dont expect it to work 100%.
Doesnt make sense if you ask me sir.
It is really hard to determine the main cause of this matter. It could be your phone: hardware or software (i doubt it is this one), or the 3rd party dock.
You tell me which one to throw and buy a new one.
Already told you why I bought it. There's nothing but stupidity in that review as docks do not put out power, they transfer it, the power supply puts out power. As for the amperage, it puts out what you put in. it will do [email protected] if you are stupid enough to put that through it... Assuming the wires don't burn. if you are going to base your assumptions on a review, at least choose one from someone knowledgeable. also, my dock never took 11 hours to charge, not that i ever bothered timing it but it sure as hell wasnt more than 4 hours (and thats giving an a good bit of a safety margin), i'd guess 2 hours 0-100 if i had to.
What I'm telling you is that the phone is not accepting the charge, not that the dock is messed up but the phone. And I wanted to know if anyone had similar issues or suggestions.
I'm glad you have insight on the matter and an opinion, however you are not trying to answer the question. I've already informed you the dock is intact and making a connection. I've checked the voltage of the xperia official charger at the cable at its end: 4v dc, the dock when hooked to that charger is 4v dc tested at the pins. I can put a larger amount through it, and any number of amps. A pogo dock is a very simple device, official or otherwise, the difference is mainly in price and design. The diy thread is a perfect example of that.
@LitoNi
I took it apart, nothing is loose. thanks
Rajinn said:
I'm glad you have insight on the matter and an opinion, however you are not trying to answer the question.
Click to expand...
Click to collapse
It's been answered, you've not bought an official product, that's the problem! Buy cheap unofficial batteries, expect issues, buy cheap replica SD Cards, expect issues, buy cheap unofficial chargers, expect issues, and looks like you can cheap docs to that list too.
XperienceD, please continue answering me with your infinite wisdom you learned from the internet. obviously you know everything about electronics.
btw fixed it, reinstalled my nand backup. software problem ftl.
didnt know this was an apple forum.
Rajinn said:
XperienceD, please continue answering me with your infinite wisdom you learned from the internet. obviously you know everything about electronics.
btw fixed it, reinstalled my nand backup. software problem ftl.
didnt know this was an apple forum.
Click to expand...
Click to collapse
Have same dock and same issue sometimes it doesn't want to charge but I just simply put it out and in and it works after reinserting.
[email protected]
Rajinn said:
XperienceD, please continue answering me with your infinite wisdom you learned from the internet. obviously you know everything about electronics.
Click to expand...
Click to collapse
I'm sharing what some of us have learned here, cheap non official products give issues, accept it or don't.
From me to you.