Hello,
I don't know what happened but the other day something really bad happened.
After unlocking my HTC HD7 really well (see here), my girlfriend also got he same phone that came with the same SPL and everything,
Went throught RSPL and HSPL fine, but when attempting to write a custom rom (latest from ansar, like I did to mine), at 5-6% throwed a write to flash error [226], and the only way to get out was getting out the battery
I tried a few more times without any luck, always stuck at 6% on the laptop and 5% on the phone, until once when I took the battery out, the phone didn't start again, no response on anything, battery, power plugin, button combination ...
What could go so wrong? I thougth that when having done RSPL and HSPL, installing ROMS couldn't brick the phone
I can change the phone once, but now I'm really scared even updating mine in the future
What does make the [226] errors? I searched a lot but found nothing, some people says the radio is to high? some the drivers
And what does going the phone from working in bootloader to brick? Maybe u have to wait some time before taking off battery after the write error [226] to make sure?
if you freshly dld the rom i suggest you to reload it from internet, then do a defrag to have your files cleaner than possible...hope you didn't do wrong with H/RSPL it could be harmful
Related
First off, anyone on this forum who has contributed anything, I am have the deepest respect for, and my favorites will get donations as soon as I have money. Ok enough a$$ kissing.
So here is my problem:
I flashed it's right's TNT 6.1 19919 after hardspling. After many problems, like pseudo-hard resetting (turning off, losing all but 6% battery, and changing the date back to what it was originally i.e. 1/27/06) while in a phone call and doing the same while using the wifi, i hard reset and still the same problems occurred. so I undid the hardspl, so now i am back to 2.25.001 in the bootloader but when i connect it to the computer (winxp) to flash the original rom (cingular 2.25) it freezes at 91%. If anyone has had this problem occur or knows the solution as to get ANY rom back on it, IT would be greatly appreciated.
Also after doing some reading I tried to flash wizard love 2.26 to it and that freezes at about 50-60%. so I am stuck and it is really annoying.
Full 8 hour charge, restart computer, different usb port. Same happens: Error 302 Update Error
Hum... maybe when you reCID locked it, you put a CID that's not for that official ROM you're trying to flash. The misbehavior of the phone is due to the ROM you had, not the CID Unlock. If I'm not mistaken, you can hardSPL it again, from bootloader. Then you can try and flash any other ROM you wish. Give my ROM (WM5SE rev5 - if your phone can handle 240MHz - or rev4) a go, after you have CID Unlocked your phone.
My phone can take up to 273 but, all the roms i flashed were g4 safe.... because the ipl spl never changed and i checked them in shell tool . it gives me a update error 302 which wizard love documentation says that the "phone needs a new rom code" which implies that it needs to be taken to cingular, and i dont think i can lie that well. how would one "accidentally" put their phone into bootloader?
theblackhandx said:
First off, anyone on this forum who has contributed anything, I am have the deepest respect for, and my favorites will get donations as soon as I have money. Ok enough a$$ kissing.
So here is my problem:
I flashed it's right's TNT 6.1 19919 after hardspling. After many problems, like pseudo-hard resetting (turning off, losing all but 6% battery, and changing the date back to what it was originally i.e. 1/27/06) while in a phone call and doing the same while using the wifi, i hard reset and still the same problems occurred. so I undid the hardspl, so now i am back to 2.25.001 in the bootloader but when i connect it to the computer (winxp) to flash the original rom (cingular 2.25) it freezes at 91%. If anyone has had this problem occur or knows the solution as to get ANY rom back on it, IT would be greatly appreciated.
Also after doing some reading I tried to flash wizard love 2.26 to it and that freezes at about 50-60%. so I am stuck and it is really annoying.
Full 8 hour charge, restart computer, different usb port. Same happens: Error 302 Update Error
Click to expand...
Click to collapse
You have posted present IPL/SPL 2.25.001,is it 2.25.001 or .0001 ?
As you removed 'HardSPL',did you reflash the appropriate IPL/SPL regarding your phones official bootloader IPL/SPL...?
You shud do the 'HardSPL' again and either do the removal of HardSPL again correctly as instructed in the sticky ' How to remove HardSPL' or Flash any other Rom to recover.
Cheers!
no it was 2.25.001 just a typo. i think i will try these suggestions when i get home and i will post my findings.
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
I don't know if I can help you but will try since this forum has helped me.
My P3600 is basically screwed. It's a walking zombie brick phone.
Why zombie? Because I bring it back from the dead everytime!
I dropped my phone quite badly twice in a day a few days back,
Next day I woke up... my pocket alarm had hung and I had to hard reset because a soft reset brought about the Tri-colored bootloader screen.
After that, everything was GONE... so I decided I might as well load a new up-to-date ROM. Was using Akeo's rom happily before that.
Did the usual SPL routine, new radio, new OS rom.
Installed new stuff...
But then phone would continually enter bootloader screen most of the time when I did a soft-reset. Except that it would have a terrible error message that only gave me the option of trying to restart without changes or basically reset everything to original settings (or something like that which meant everything is gone again). With the error message in place... nothing would work.
Could not reset into normal bootloader. (without the error message)
Windows mtty.exe method could not connect. (it would under normal bootloader)
Activesync was obviously disabledsync.
Flashed radio, spl and OS roms repeatedly using Des' SSPL and Olio's HardSPL 1.20 and 1.30 to no effect. It would always come back with that error on a random reset.
Then I read about the method of flashing with SD card. But this didn't solve my problem... it would come back still after a reset.
Mtty.exe from Windows XP to format nand and mark bad blocks etc.
Nothing found.
Finally, I almost gave up.
Then out of desperate measure.
I decided to leave a copy of a TRINIMG.nbh in the SDcard for GOOD!
It's basically an SPL image. Done with the NBHutil.
Used it to split out the HardSPL 1.30 spl.nb and merged it with the splash.nb and sub-splash.nb from my current OS rom.
Everytime I reset... there's still a chance it will enter bootloader mode with that horrible error message. But in such a situation... I now simply choose not to reset settings to default and instead simply pull out the battery.
Then plug it back in and power it on again. 80% of the time... it boots back into Windows mobile like normal on the first try! No loss of settings... nothing nasty. Back to normal! The other 20% of the time? I just pull out the battery and power it on more times! Till it works! Hasn't failed me yet in 5 days. Mind you, I was bricking it twice a day before this. That's progress!
I simply use SPL backup to make a full backup anyway whenever I install any new software etc, contacts etc.
Give it a shot.
I don't know why it worked for me...
Maybe I have bad sectors or something where the SPL is.
Whatever it is... the SDcard's TRINIMG.nbh works as my SPL now.
Think of it as a case of a bad bootup sequence on an old dos system needing a backup msdos bootdisk to do the trick!
Good luck!
Hi, first of all let me begin by saying that I have spent a long time reading around through the guides and forums about flashing rom/radio to my Rohdium but still face problems. I have successfully flash my old TyTN II and Orange E650 but am at a loss as to why Im struggling this time round!
I flashed the Hard SPL which went 'fairly' smoothly, got there in the end after having problems on WIndows 7 64bit and then succeeded using Xp 32. However when trying to flash a new rom and/or radio I am greeted with an error, that being Error 284. I have tried like I say on Win7 64, Xp32 and when the error pops up my phone gets stuck on the process bar and forced to pull battery out. I then put it back in and it freezes on bootloader. The RUU software trys to recover but it is a loop of the same thing happening (attempts and then crashes). The only way to get out of this mess was strangely reflashing HardSPL which recovers it and allows me to boot to Windows. I have tried flashing a radio and/or rom whilst in sync within windows, I have tried flashing when manually forcing the phone to enter bootloader, I even paid the £10 to get the unlocker which would patch the special radio but that even returns the same error. I have the sim card out and storage card, battery charged over 50%. I even tried the Mtty program (sorry if mispelled, at work now and can't fully remember name!) when it was stuck at bootloader and using the "boot" command it boots as far as Touch Pro 2 logo but then doesn't progress, then i resorted to reflashing HardSPL which allowed me to boot properly. I just don't know what else to try!
Like I said Im sorry if this is obvious to someone but I have tried alot!
Many thanks in advance if someone could help!
* Update: Just tried flashing a radio on my works computer (XP 32) and it flashed no problem!? Wonder why my operating systems had an issue?
** SOLVED! ** - got home and randomly tried again on Win7 64 without using my USB extension cable and plugged into a different USB port directly and it worked! Faulty cable maybe, bad luck, who knows, it works!
Thanks.
Sound like maybe your RUU/update utility may have gotten corrupted. I would try to re-download the rom you want to flash over to your home pc again and try to re-flash.
If that doesn't work, you can always flash your rom through the storage card.
hmmm yea thats possible, will try when I get back in couple of hours thanks! Just seemed weird how nothing was working, different roms (cooked roms or shipped roms) and even the security/sim unlocker that I purchased......mystery!
USB cable tends to go bad easily! That might be the reasion why!
i usually put new Roms on my devise so this isn't new to me one day i was putting a new ROM on it and it said it completed successful but when i turned my phone on it was stuck in bootlader screen even when i loaded the ROM through the SD card pls help
Was it the same ROM every time? Einstein said that the definition of insanity was repeating the same thing over and over again and expecting a different result.
Try re-downloading the ROM, or flashing a different one.
i made sure to try out many things hears what i did i
tried using multiple roms
tried the stock rom
and now i think im just gonna leave it on bootlader screen till the baterry runs out and try again but i dought itll work i need a way to relod the botlader if that posible
Unless you have another way to recharge that battery, I wouldn't recommend letting it drain all the way. I have seen several threads started by people who did this and then could not get the battery to charge in the phone without a jump start from an external charger.
Edit:
Did you task 29 between each ROM flash?
Hamsteriel said:
Unless you have another way to recharge that battery, I wouldn't recommend letting it drain all the way. I have seen several threads started by people who did this and then could not get the battery to charge in the phone without a jump start from an external charger.
Edit:
Did you task 29 between each ROM flash?
Click to expand...
Click to collapse
Task 29 shouldn't be necessary...
To the OP, download a different ROM, on a different computer and with a different internet connection if possible. You never know (I had to do this once cuz I kept downloading corrupted ROMs).
ill try using my laptop and incase that dosnt work how do u do a task 39
nuts this is giving me so many prob i get it to load the new rom and it sas its sucesful and i see it loadin gon the phone and when it restarts it just goes rite back to bootlader like nothing was laded onto it
um i treid flashing multiple roms on multiple computers and i have a nwe prob god hats me anyway now my phone isnt gets into the progress bar the one that shows u how much of the rom is loaded onto the divice and its just stuck at zero im sry to bother u but this is really becoming frustrating
levytheman95 said:
um i treid flashing multiple roms on multiple computers and i have a nwe prob god hats me anyway now my phone isnt gets into the progress bar the one that shows u how much of the rom is loaded onto the divice and its just stuck at zero im sry to bother u but this is really becoming frustrating
Click to expand...
Click to collapse
If its stuck at zero, pull out battery, try again. Switch USB wires, download a different ROM and make sure you have HardSPL. Its a very simple process actually. Not rocket science... So don't panic
Keep at it, and you will get it.
i tried to restore my hard spl and even that i cant put on
I know you said you tried several roms were any of these stock roms?
You shouldn't need to re-flash Hard SPL.
Try the sd card method instead.