Database Develop

Ics team nyx 4.0.4 camera

I can't record or play videos on my phone since i flashed this firmware and while flashing it it rebooted like 20 times i removed battery and charged it and did couple things with it so it started flashing. What should i do? Re-flash or something? (1,2 Ghz...

go in recovery,wipe cache,wipe dalvik cache,factory reset and reflash the rom.if dont work put the phone in download mode and install with odin an official fimware.if you have galaxy s plus (19001)go here:http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Gingerbread_2.3.6.download odin and ops from here:http://uploads.ro/dl2/meOnrKNeKbeD-fa62.now connect the phone in download mode on pc,unzip odin+ops,open odin select onepackage press ops in odin and select the unziped ariesVE,after press one package(select integrate package..)and select .md5.tar(fimware from downloade link).if you dont have samsung galaxy s plus and dont follow corectly the steps you can brick your device.im not responsable for you hapen!,i try to help you.

uNb0rN1 said:
go in recovery,wipe cache,wipe dalvik cache,factory reset and reflash the rom.if dont work put the phone in download mode and install with odin an official fimware.if you have galaxy s plus (19001)go here:http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Gingerbread_2.3.6.download odin and ops from here:http://uploads.ro/dl2/meOnrKNeKbeD-fa62.now connect the phone in download mode on pc,unzip odin+ops,open odin select onepackage press ops in odin and select the unziped ariesVE,after press one package(select integrate package..)and select .md5.tar(fimware from downloade link).if you dont have samsung galaxy s plus and dont follow corectly the steps you can brick your device.im not responsable for you hapen!,i try to help you.
Click to expand...
Click to collapse
i tried the first thing doesn't work, where can i get stock rom? thanks

endrit9 said:
i tried the first thing doesn't work, where can i get stock rom? thanks
Click to expand...
Click to collapse
put in download mode how i say and install an official rom with odin.after you will flash again recovery and update again to cm9

[Q] Stuck on Samsung Logo after Stock ROM

Hello Everybody.
Time ago I had one Galaxy SCL, and I replaced it with my Note 7000. I ve tried to flash a ROM but I have now the Samsung logo on the screen and the phone dont boot.
I have a GNote from Spain, free (No network op), Rom 4.0.3 default, updated from the same device 2 months ago...
Here the things that I made to the GNote:
Root--> I found I file called "Root_SuperSU.0.95.Only-signed". Copied into a external SD Card, Installed It, check with app "Root Checker" Succesfully. I gained Root Access
-Installed CWM, and installed into flash, so I can boot (Vol up, home, power) with CWM.
-Located a ROM called "ICS_Stunner_Beta4_final", copied into SD Card, reboot phone into CWM, wipe all -->data, cache, dalvik, battery. Installed from SD, reboot -->FAIL -->First Logo came up, then the options and the back buttons remain highlighted forever-->No reboot, no shutdown, nothing. I can shutdown the phone but I'm in a bucle...
-I can start the phone with downloading mode, and recovery mode (without CWM only default), I decided to install a Stock ROM, from your forum http://forum.xda-developers.com/showthread.php?t=1424997 , taking the one from Spain (Movistar). -->STUCK on SAMSUNG LOGO.
-I can access again to download mode and recovery mode, but I dont know what should I do know...
I read the forum with similar questions but useless because they are in different situation I think. Different ROM or default settings or modifieds Kernels...
Some one can guide me, in order to recovery the Gnote?
Thanks in advance,
PD: Sorry for my English, hope that you can understand it perfectly. ^^

.. from the same forum.. download a GB rom 2.3.6.. open pc odin and select the tar.md5 file in the pda tab of odin. dont change anything else. put the phone is download mode .. connect to pc and start the flash.. once success.. hold power + home + vol Up... go to recovery mode. do a wipe data factory reset. then reboot the phone. check what happens then
by the way how did u install CWM ?

nokiamodeln91 said:
.. from the same forum.. download a GB rom 2.3.6.. open pc odin and select the tar.md5 file in the pda tab of odin. dont change anything else. put the phone is download mode .. connect to pc and start the flash.. once success.. hold power + home + vol Up... go to recovery mode. do a wipe data factory reset. then reboot the phone. check what happens then
by the way how did u install CWM ?
Click to expand...
Click to collapse
Hi. Thanks for your answer. I download CWM, Installed to recovery from the first option of CWM....
Now... Im scared... Ive search for the 2.3.6 GB ROM, but I cannot find the stock ROM.. Also I dont know if I can use any 2.3.6... Because I found a post of Dr. Ketan but I dont know which is my actual kernel....
Thanks.

doesnt matter.. u can download any rom like this one
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
---------- Post added at 01:02 AM ---------- Previous post was at 01:00 AM ----------
u downloaded cwm from where ? from the clockworkmod site?

nokiamodeln91 said:
doesnt matter.. u can download any rom like this one
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
---------- Post added at 01:02 AM ---------- Previous post was at 01:00 AM ----------
u downloaded cwm from where ? from the clockworkmod site?
Click to expand...
Click to collapse
CWM directly downloaded from Play Store.
Downloading the ROM now... I will flash it and answer with (good) news.
Thanks again N91 ^^

Liptikal said:
CWM directly downloaded from Play Store.
Downloading the ROM now... I will flash it and answer with (good) news.
Thanks again N91 ^^
Click to expand...
Click to collapse
I'm downloading again from the mirror. The first file that I downloaded is password protected...

ya i guess the password is sammobile.com..or samfirmware.com.... its in the thread

nokiamodeln91 said:
ya i guess the password is sammobile.com..or samfirmware.com.... its in the thread
Click to expand...
Click to collapse
samfirmware.com is the correct password.
Tks again! Flashing now....

OHHHH! My 7000 back to life again!!! Ohhh! You are the master! I love you!!! I'm so so thankful for your help.....
Now I will read more before do any changes....
Thanks again!!
Regards,

Oh great..
congrats

[Q] GT-S5830i Stuck in Boot Loop

Hi, I have a GT-S5830i which i was using Route 66 app on when it froze. I had to take the battery out to try and reboot the device. Since then it is just stuck in a boot loop:
Samsung blue swirling graphic
Samsung logo
I have tried:
to connect the device to my pc via Samsung Kies, and I get "No SIM card inserted. Unable to continue communication"
in Android System Recovery <3e>
reboot system nowwipe data/factory reset
apply update from sdcard (S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar)
wipe cache partitionto restore to factory reset
to restore via ODIN3 v1.87
None of these have any effect.
Any advice greatly received.
Dai

This : S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar is an odin flashable package not an update package.
If yu can't flash it with Odin you need to split it with SplitFUS

daigriff said:
Hi, I have a GT-S5830i which i was using Route 66 app on when it froze. I had to take the battery out to try and reboot the device. Since then it is just stuck in a boot loop:
Samsung blue swirling graphic
Samsung logo
I have tried:
to connect the device to my pc via Samsung Kies, and I get "No SIM card inserted. Unable to continue communication"
in Android System Recovery <3e>
reboot system nowwipe data/factory reset
apply update from sdcard (S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar)
wipe cache partitionto restore to factory reset
to restore via ODIN3 v1.87
None of these have any effect.
Any advice greatly received.
Dai
Click to expand...
Click to collapse
u need to split the tar file using splitfus and then flash via odin in download mode
search XDA for more help or reply here.
CLICK THANKS IF I HELPED

Styrke said:
This : S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar is an odin flashable package not an update package.
If yu can't flash it with Odin you need to split it with SplitFUS
Click to expand...
Click to collapse
I downloaded the SplitFUS file but when i try to run it i get cygwin1.dll missing.

well i once bricked my s5839i and i flashed 4 files i think i downloaded the original frimewares and flashed them via odin( seperate files )

http://forum.xda-developers.com/showthread.php?p=30731352
In that post is the unbrick provedure and in that post post are splitted firmwares
http://forum.xda-developers.com/showthread.php?p=33630622
Tested and worked
Sorry for my bad english

daigriff said:
I downloaded the SplitFUS file but when i try to run it i get cygwin1.dll missing.
Click to expand...
Click to collapse
dude u need to install cygwin and samsung drivers too...
follow the video tutorial by feetsonfire CLICK HERE

[Q] Stuck on Samsung Logo

Hey Guys,
Last time i bricked my phone by installing other model custom rom then i got my motherboard replcaed by samsung service centre.
However i got Froyo 2.2 Os and i thought of upgrading to GB but when i upgraded it my SGM got stucked on Samsung Logo without recovery.
I cant enter Recovery but i can go to download mode and i even tried many firmwares like XXKPI, DDKQ7 but no luck.
Any Help on how to do it? Should i Flash CWM and try to go into recovery and wipe cache/data?
Please reply as soon as possible

Bro! Why not making a little effort to search a bit b4 you post. You can find plenty of similar threads here only.
Sent Via XDA™ Premium

Galaxy_Rohit said:
Bro! Why not making a little effort to search a bit b4 you post. You can find plenty of similar threads here only.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I did Searching in forum but i couldnt get a fix
-Sorry For my Bad English

what do u have?
5570 or 5570i ...?

shwe said:
what do u have?
5570 or 5570i ...?
Click to expand...
Click to collapse
5570

OPS:- TASS_v1.0.ops
If your firmware is one package(i.e. if it contains a single ".tar.md5" file) then you need to place it under one package in Odin.
& if its full package(i.e. if it contains four files) then place the files under correct field like this:-
BOOT:- APBOOT……..
PHONE:- MODEM……
PDA:- CODE……………
CSC:- CSC……………….
Place ops file under OPS field.
Recheck the steps & also recheck ops filename. Wrong name produces undesirable consequences.
Hit "Start". Wait for 5-10 mins.
Done.
Now, if u face bootloops problem, then pull out & re-insert the battery, press HOME+POWER buttons together to open stock recovery mode (Now navigate up/down using volume+/- keys, & press HOME key to make selection, & POWER key for previous menu.)
*Select wipe data/factory reset->Yes
*Then wipe cache->Yes
*Then select reboot system now.
Congrats!!:thumbup: Now, you will have a fully working original Galaxy Mini.
Hope this helps...!!!
Sent Via XDA™ Premium

Galaxy_Rohit said:
OPS:- TASS_v1.0.ops
If your firmware is one package(i.e. if it contains a single ".tar.md5" file) then you need to place it under one package in Odin.
& if its full package(i.e. if it contains four files) then place the files under correct field like this:-
BOOT:- APBOOT……..
PHONE:- MODEM……
PDA:- CODE……………
CSC:- CSC……………….
Place ops file under OPS field.
Recheck the steps & also recheck ops filename. Wrong name produces undesirable consequences.
Hit "Start". Wait for 5-10 mins.
Done.
Now, if u face bootloops problem, then pull out & re-insert the battery, press HOME+POWER buttons together to open stock recovery mode (Now navigate up/down using volume+/- keys, & press HOME key to make selection, & POWER key for previous menu.)
*Select wipe data/factory reset->Yes
*Then wipe cache->Yes
*Then select reboot system now.
Congrats!!:thumbup: Now, you will have a fully working original Galaxy Mini.
Hope this helps...!!!
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried Pulling out battery and going into recovery mode but still no luck then i tried flash CWM through odin and it works and i got into recovery but however after wiping data/cache/battery stats/dalvik and after rebooting i get Samsung Logo for 7-8 sec then i get battery charging logo..

Have you tried all steps above?? Try ALL of them first. This method has saved many phones. Infact, it's the only working way.
As far as I know, CWM works only if gingerbread is successfully installed. It doesn't work on Froyo. & since you are saying that you've flashed CWM & its working…, then maybe you can flash a custom rom(for your device specific model) to bring it back on track. But **DO IT AT YOUR OWN RISK**.
Sent Via XDA™ Premium

Galaxy_Rohit said:
Have you tried all steps above?? Try ALL of them first. This method has saved many phones. Infact, it's the only working way.
As far as I know, CWM works only if gingerbread is successfully installed. It doesn't work on Froyo. & since you are saying that you've flashed CWM & its working…, then maybe you can flash a custom rom(for your device specific model) to bring it back on track. But **DO IT AT YOUR OWN RISK**.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I Wonder why i cant install Gingerbread?
I Have flashed GB many times and why now.
The only thing i can flash is Froyo :S

If it works fine on Froyo, it will work for sure on gingerbread. Maybe ur gb package got corrupted.
Sent Via XDA™ Premium

Galaxy_Rohit said:
If it works fine on Froyo, it will work for sure on gingerbread. Maybe ur gb package got corrupted.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
The only hope i have is to go to SSC and get it updated :/

flash the firmware which contains arm11boot and data.rfs files

dheeraj (dhlalit11) said:
flash the firmware which contains arm11boot and data.rfs files
Click to expand...
Click to collapse
can u tell me any firmware who have these files?

[Q] Need PIT file for S6500 (not 'd')

every one give me a PIT file for Galaxy mini 2 s6500 (not s6500d)
i try with "JENA_Secure_NonNFC_1109.zip" and it not work for me

more info
detail for "it not work for me":
my phone is loop in booting when i use ODIN with: "JENA_Secure_NonNFC_1109" PIT file + my stock rom
I think the problem is not in my stock rom because in past, i used this stock rom (not with "JENA_Secure_NonNFC_1109" PIT file) and it worked

askereverywhere said:
detail for "it not work for me":
my phone is loop in booting when i use ODIN with: "JENA_Secure_NonNFC_1109" PIT file + my stock rom
I think the problem is not in my stock rom because in past, i used this stock rom (not with "JENA_Secure_NonNFC_1109" PIT file) and it worked
Click to expand...
Click to collapse
Install cwm on phone, and wipe data and system and cache.
Then flash s6500 stock rom with odin in pda column. Stock rom, it have partition file inside..i guess, it will be flashed.

MaDaLiNoSt said:
Install cwm on phone, and wipe data and system and cache.
Then flash s6500 stock rom with odin in pda column. Stock rom, it have partition file inside..i guess, it will be flashed.
Click to expand...
Click to collapse
thank for support me. BUT:
after repartition with that "unsecure_non_nfc" PIT by ODIN, I face with these problem:
1- I can not enter normal boot (loop)
2- I can not enter recovery mod (i use volumdown + vollumup + home + power but there is nothing happen). I flash CWM by ODIN but there is no change
3- I only can use DOWNLOAD mod
I dont clearly understanding about "partition, PIT, ... in android" , but I think the problem is "partition crash"
please continue help me

askereverywhere said:
thank for support me. BUT:
after repartition with that "unsecure_non_nfc" PIT by ODIN, I face with these problem:
1- I can not enter normal boot (loop)
2- I can not enter recovery mod (i use volumdown + vollumup + home + power but there is nothing happen). I flash CWM by ODIN but there is no change
3- I only can use DOWNLOAD mod
I dont clearly understanding about "partition, PIT, ... in android" , but I think the problem is "partition crash"
please continue help me
Click to expand...
Click to collapse
Just look around in this forum ..there are 2-3 threads with how to fix recovery if is not shown or get ramdump.
And please explain more about 1) no normal boot...did you stuck on : samsung logo / galaxy mini 2 / boot animation.

MaDaLiNoSt said:
Just look around in this forum ..there are 2-3 threads with how to fix recovery if is not shown or get ramdump.
And please explain more about 1) no normal boot...did you stuck on : samsung logo / galaxy mini 2 / boot animation.
Click to expand...
Click to collapse
OK thank you so much
+ In the evening, the loop is: boot animation (I see anmation). But in the night, when I try flash CWM by ODIN (then I still can not enter recovery), the loop is: samsunglogo -> galaxymini2-> samsunglogo -> .... (I did not see animation) :laugh:
+ when I try re-partition (still with the "unsecure_non_nfic" PIT file) by ODIN, the ODIN show error: "re-partion operation falled" and my phone show: "secure check false: 0x95"

+ and now, when I try flash stock rom (not include PIT file) by ODIN the loop is: animation again
I feel my phone rom is now so mess

askereverywhere said:
+ and now, when I try flash stock rom (not include PIT file) by ODIN the loop is: animation again
I feel my phone rom is now so mess
Click to expand...
Click to collapse
Ok you really need to force recovery to wipe data &system ..but please DO NOT EVER TRY AFTER REPAIR .PIT FILES!
MAKE SURE THAT YOU ALREADY FLASHED CLOCKWORKMOD RECOVERY!
1) remove battery and put in again in phone
2) go to download mode, but do not skip first screen
3) Logical: Pressing down button will reboot phone...but down + up + reboot = recovery
so...press vol down and vol up..and just hold it until you will see cwm logo ( please flash cwm 6.0.3.3 !)
Repeat: first press vol down and then wol up ! at but faaasstt!
4) CWM is now booting...wipe system and data
5) reflash stock rom...without any pit file!!!!!!!! (don't every try againg to use .pit! )
If your problem is not solved repeat all steps many times!!! TO RECOVER MY PHONE I NEED 1-2 HOURS!

MaDaLiNoSt said:
Ok you really need to force recovery to wipe data &system ..but please DO NOT EVER TRY AFTER REPAIR .PIT FILES!
MAKE SURE THAT YOU ALREADY FLASHED CLOCKWORKMOD RECOVERY!
1) remove battery and put in again in phone
2) go to download mode, but do not skip first screen
3) Logical: Pressing down button will reboot phone...but down + up + reboot = recovery
so...press vol down and vol up..and just hold it until you will see cwm logo ( please flash cwm 6.0.3.3 !)
Repeat: first press vol down and then wol up ! at but faaasstt!
4) CWM is now booting...wipe system and data
5) reflash stock rom...without any pit file!!!!!!!! (don't every try againg to use .pit! )
If your problem is not solved repeat all steps many times!!! TO RECOVER MY PHONE I NEED 1-2 HOURS!
Click to expand...
Click to collapse
OK thank you so much, I will try :silly:

askereverywhere said:
OK thank you so much, I will try :silly:
Click to expand...
Click to collapse
Problem is solved?

MaDaLiNoSt said:
Problem is solved?
Click to expand...
Click to collapse
Oh my god, it work :good::good::good::good::good: haha thank you so much, happy to see myphone work again
(but in fisrt screeen of DOWNLOAD mode, it should be: vol up + vol down + [home])
after wide data,catch,.. the loop was disapear and I can enter RECOVERY mode with normal way. Can you teach me some knowleage why bootting is effect by wide data,.. (i think bootting is only effect by boot.img)
:highfive:

@MaDaLiNoSt .. What is "Secure check fail 0x95" ?? I get that message too in Odin when I tried to flash the Pit File ..I hate it .. And I can't Even flash stock rom with odin .. I've tried several time .. It always failed in "Fat.bin" ?? Im not really sure what that is ..

the chossen one
Ezzam_Itachi said:
@MaDaLiNoSt .. What is "Secure check fail 0x95" ?? I get that message too in Odin when I tried to flash the Pit File ..I hate it .. And I can't Even flash stock rom with odin .. I've tried several time .. It always failed in "Fat.bin" ?? Im not really sure what that is ..
Click to expand...
Click to collapse
replace me manage the threads :laugh:

Ezzam_Itachi said:
@MaDaLiNoSt .. What is "Secure check fail 0x95" ?? I get that message too in Odin when I tried to flash the Pit File ..I hate it .. And I can't Even flash stock rom with odin .. I've tried several time .. It always failed in "Fat.bin" ?? Im not really sure what that is ..
Click to expand...
Click to collapse
OK
1) WHY DO YOU FLASH PIT FILES??
Pit files are used when on your screeen appear partition fail ! Else is not useful!
2) Secure check fail is:
-Phone doesn't need pit at this moment
-you renamed the file
-file was damaged
-file is incompatible with firmware
-odin is outdated
-antivirus conflict while reading file
If you fail in fat.bin
-your rom is not compatible
-phone /system damage (need wipe and reflash)
-rom is wrong builded
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
askereverywhere said:
Oh my god, it work :good::good::good::good::good: haha thank you so much, happy to see myphone work again
(but in fisrt screeen of DOWNLOAD mode, it should be: vol up + vol down + [home])
after wide data,catch,.. the loop was disapear and I can enter RECOVERY mode with normal way. Can you teach me some knowleage why bootting is effect by wide data,.. (i think bootting is only effect by boot.img)
:highfive:
Click to expand...
Click to collapse
Yeah, i forgot to tell you about +home button

MaDaLiNoSt said:
OK
1) WHY DO YOU FLASH PIT FILES??
Pit files are used when on your screeen appear partition fail ! Else is not useful!
2) Secure check fail is:
-Phone doesn't need pit at this moment
-you renamed the file
-file was damaged
-file is incompatible with firmware
-odin is outdated
-antivirus conflict while reading file
If you fail in fat.bin
-your rom is not compatible
-phone /system damage (need wipe and reflash)
-rom is wrong builded
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
Yeah, i forgot to tell you about +home button
Click to expand...
Click to collapse
I tried to flash PIT bcause I got problem with internal storage in KITKAT rom .. But nevermind .. Im satissfied with CM10.1 :angel: ..
Now about the failure in "Fat.bin" .. I've checked it just now .. In Download mode it said "Secure Check Fail : ID 0xc" .. what is that ?? Im very sure my phone model is GTS-6500D .. But in Download mode It was GTS-6500 !! And the baseband is clearly diferent from the one in "about Phone" setting .. But I still can use it tho ..

Ezzam_Itachi said:
I tried to flash PIT bcause I got problem with internal storage in KITKAT rom .. But nevermind .. Im satissfied with CM10.1 :angel: ..
Now about the failure in "Fat.bin" .. I've checked it just now .. In Download mode it said "Secure Check Fail : ID 0xc" .. what is that ?? Im very sure my phone model is GTS-6500D .. But in Download mode It was GTS-6500 !! And the baseband is clearly diferent from the one in "about Phone" setting .. But I still can use it tho ..
Click to expand...
Click to collapse
AS I SAID... you flashed an wrong rom.. you need to flash an s6500D rom not s6500. I never see an error in odin! Because I know what I am doing.

MaDaLiNoSt said:
AS I SAID... you flashed an wrong rom.. you need to flash an s6500D rom not s6500. I never see an error in odin! Because I know what I am doing.
Click to expand...
Click to collapse
Will try something else .. Thanks for your reply !!