Bootloop after installing kernel [solved] - LG Optimus 2x

I got a bootloop on Nova HD RC-12-21 (ICS 4.0.3) trying to install iron kernel 64MB from Aroma Installer. I can't get into CWM even with adb, so I don't know how to install another rom.

are you using cwm-rcovery touch?
see the hints about problems with circular bat mod, cwm touch etc.
did you try full wipe or non wipe?

Not being able to start CWM is weird...
However, you have smartflash and nvflash to those kind of panic situations.

wired indeed - may you post complete versions? just interested in the prob

world_of_ursus said:
are you using cwm-rcovery touch?
see the hints about problems with circular bat mod, cwm touch etc.
did you try full wipe or non wipe?
Click to expand...
Click to collapse
i'm using cwm-recovery without the touch but i'm not sure what version.
i think the problem is the iron kernel (because i've already saw some posts from people with problems with it. But all of them was able to start cwm.
i wiped data/factory and cache.
LarsPT said:
Not being able to start CWM is weird...
However, you have smartflash and nvflash to those kind of panic situations.
Click to expand...
Click to collapse
i've tried to use nvflash and nothing happened.

If you really can't enter CWM (how it's even possible after flashing system/boot partition?) the only thing you can do is reflash recovery or/and system+boot with smartflash. Somewhere on this forum you should easly find required files with how-to's.

giisele said:
i've tried to use nvflash and nothing happened.
Click to expand...
Click to collapse
Flash stock ROM (any V20*) using smartflash.
Root it with SuperOneClickv2.3.3
Install CWM 5.0.2.7-R2
And try flash Nova HD agian.

NicomUA said:
Flash stock ROM (any V20*) using smartflash.
Root it with SuperOneClickv2.3.3
Install CWM 5.0.2.7-R2
And try flash Nova HD agian.
Click to expand...
Click to collapse
When i try flash stock rom with smartflash, occurs this following error:
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.3 Sec :PSI RAM writing start
00:12.3 Sec :Timeout error is occured
00:12.3 Sec :error!
with smartflash i've tried differents basebands and got the same results.
and nvflash dont recognize the device at all.

I just solved my problem doing this:
First I flashed a .kdz file (with the stock rom) with the help of this thread, then I rooted with SuperOneClick v2.3.3.0. Instaled CWM 5.0.2.0.
I didn't want to flash Nova HD never again, so I flashed a CM9 Kang and now it's stuck in the second logo

giisele said:
I just solved my problem doing this:
First I flashed a .kdz file (with the stock rom) with the help of this thread, then I rooted with SuperOneClick v2.3.3.0. Instaled CWM 5.0.2.0.
I didn't want to flash Nova HD never again, so I flashed a CM9 Kang and now it's stuck in the second logo
Click to expand...
Click to collapse
If you have flashed ONLY (without any other custom kernel or mods) Owain's newest kang on stock rom AFTER data/dalvik cache full wipe, try to do some reboots (1-5) after waiting at second logo longer then 1min. I have that issue sometimes and android is booting eventually, sooner or later.

i flashed LG's rom .kdz that i found in lg's site when i got stuck in 2nd logo
so i flashed again with CM 7.2.0 and voilá, i have my phone back!
thank you guys

I'm glad you've made it
Could you kindly change the name of the thread and add [solved] at the end of it?

LarsPT said:
I'm glad you've made it
Could you kindly change the name of the thread and add [solved] at the end of it?
Click to expand...
Click to collapse
there you go!

Related

(Q) Need help BADLY

I got some problem with installing a Custom rom...
I allready got root from superone Click, got Titanium Backup working...
then i installed The clockworkmod (external sd) from the tread in the forum.
then i moved the Custom rom MODACO FR17 Fear edition to my external sd..
booted into CMW by holding VOL DOWN + POWER
backup with nand
then wiped data and Cache
then installed the Custom rom and it went fine it took 3-4 min and then it said ok
I rebooted and i just hanged on the LG LOGO for 10-15 min.
removed the battery and still the same hangs on the LG LOGO
tried flashing it all over but still the same...
i was so lucky that i could restore my backup and now it up running...
can somebody please help me what could have gone Wrong ??
should i try another CWM ??
dk_iceman said:
I got some problem with installing a Custom rom...
I allready got root from superone Click, got Titanium Backup working...
then i installed The clockworkmod (external sd) from the tread in the forum.
then i moved the Custom rom MODACO FR17 Fear edition to my external sd..
booted into CMW by holding VOL DOWN + POWER
backup with nand
then wiped data and Cache
then installed the Custom rom and it went fine it took 3-4 min and then it said ok
I rebooted and i just hanged on the LG LOGO for 10-15 min.
removed the battery and still the same hangs on the LG LOGO
tried flashing it all over but still the same...
i was so lucky that i could restore my backup and now it up running...
can somebody please help me what could have gone Wrong ??
should i try another CWM ??
Click to expand...
Click to collapse
newest CWM is here : http://forum.xda-developers.com/showthread.php?t=1098001
generally, you did everything right, wipe data / cache FIRST in recovery, THEN apply custom ROM
superone Click is not really needed before, but it doesn´t matter ...
you could update baseband first : http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110502/
use Baseband 1035.21_20110405 , Baseband 1035.21_20110502 is buggy !
75markus said:
newest CWM is here : http://forum.xda-developers.com/showthread.php?t=1098001
generally, you did everything right, wipe data / cache FIRST in recovery, THEN apply custom ROM
superone Click is not really needed before, but it doesn´t matter ...
you could update baseband first : http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110502/
use Baseband 1035.21_20110405 , Baseband 1035.21_20110502 is buggy !
Click to expand...
Click to collapse
The CWM your refering to is the one i used ? should i try the one useing INTERNAL SD ?
does it matter that before i used the mentioned CWM above i tried to use the CWM ROM MANAGER from Marked, but it did'nt work, then i installede the other CWM ??
I Allready got the baseband 405 installed
can it have something to do with the custom rom change the fileformat to EXT4 ??
I really dont undestand what went wrong ?? I have been flashing rom since HTC HERO, never had problems not even with SGS
had the same problem that it hange at the LG log, i searched for a recovery solution and i found one in this forum and found a soltution to restore the phone with NVFlash
here is the link :http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
all you have to do is download the 2 files from there, take the battery out of your device, connect it to the computer. hold up and down and power and a device will be recognized by your system (the device disp;lay will stay black)
install the downloaded driver (the device should be recognized by your windows)
then run the bat file from the 2nd download and the device should be restored.
after that it will go into boot loop and you have to insert the battery.
then it should start up like a new device. hope that helps
grognaz said:
had the same problem that it hange at the LG log, i searched for a recovery solution and i found one in this forum and found a soltution to restore the phone with NVFlash
here is the link :http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
all you have to do is download the 2 files from there, take the battery out of your device, connect it to the computer. hold up and down and power and a device will be recognized by your system (the device disp;lay will stay black)
install the downloaded driver (the device should be recognized by your windows)
then run the bat file from the 2nd download and the device should be restored.
after that it will go into boot loop and you have to insert the battery.
then it should start up like a new device. hope that helps
Click to expand...
Click to collapse
I got it up running again by restoring my nand backup, and its working.
but what i would like to is installe a custom rom, would that your are saying help me ??
do i have to root it after doing the above ?
dk_iceman said:
The CWM your refering to is the one i used ? should i try the one useing INTERNAL SD ?
does it matter that before i used the mentioned CWM above i tried to use the CWM ROM MANAGER from Marked, but it did'nt work, then i installede the other CWM ??
I Allready got the baseband 405 installed
can it have something to do with the custom rom change the fileformat to EXT4 ??
I really dont undestand what went wrong ?? I have been flashing rom since HTC HERO, never had problems not even with SGS
Click to expand...
Click to collapse
you can try and download / install CWM 3028 with ROM Manger, it also used to work for me ...
perhaps the EXT4 conversion didin´t work, who knows ...
you didn´t do anything wrong yet, so keep trying
Just one question, did you wipe the dalvik cache ?
Mike_52 said:
Just one question, did you wipe the dalvik cache ?
Click to expand...
Click to collapse
yes i tried again now... and wiped dalvik cache in advanced. still the same stops on the LG LOGO
one question.. when entering CWM by holding VOL DOWN + Power i have read it should say ANDROID ?? but mine Dosen't say ANDROID , it just goes from LG LOGO into CWM
okay now Im starting all over i think...
I just flashed the O2X with NVflash and beging from scratch
make sure your CWM is updated the first CWM version had issues
Anyway you should post such threads in General, it has nothing to do with dev.
Sorry for placing this tread in the wrong place...
I finally got something working..
CyanogenMod 7 is running and BlazingDragon 1,7 works perfekt..
but still no matter what i do i can't get MoDaCo FR17 Fear Edition to work :-(
dk_iceman said:
Sorry for placing this tread in the wrong place...
I finally got something working..
CyanogenMod 7 is running and BlazingDragon 1,7 works perfekt..
but still no matter what i do i can't get MoDaCo FR17 Fear Edition to work :-(
Click to expand...
Click to collapse
you can try orig. FR17 prebake from Modaco, worked fine for me ... http://android.modaco.com/content/l...ptimus-2x-with-online-kitchen-now-with-oc-uv/
FR17 Fear is using my theme, you can apply afterwards if you like
find in my signature BGB Theme
Have you tried downloading the ROM one more time?
Maybe you got a bad download. you could do a MD5 check on the file to be sure.
cagra said:
Have you tried downloading the ROM one more time?
Maybe you got a bad download. you could do a MD5 check on the file to be sure.
Click to expand...
Click to collapse
Tried that also :-S
the only thing i haven't tryed is Checking the MD5, wich program do you use to check it with ?
Never done a MD5 check my self, but there should be plenty of freeware tools that can do it.
I had the same problem on fear edition. After i got stuck @ logo i just wiped dalvik and cache again 2x and then rebooted and started working fine.
Sent from my LG-P990 using XDA App
peacekeeper05 said:
I had the same problem on fear edition. After i got stuck @ logo i just wiped dalvik and cache again 2x and then rebooted and started working fine.
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
still not working

[Help] Boot Loop everytime I go to recovery

here's the thing..
i'm running on v20g, i rooted it using LG extract and injected CWM, flashed it using smart flash. but everytime i go to Reboot to recovery i always end up on a boot loop.
will someone help me? is there any way to downgrade from v20g to v20o??
please help me, i'm unable to use my phone for about a week now. :crying: :crying: :crying:
try using smartflash.... works for me everytime... and also try flashing the normal cwm not the touch one... might help...
Zaihanzainal said:
try using smartflash.... works for me everytime... and also try flashing the normal cwm not the touch one... might help...
Click to expand...
Click to collapse
you suggest i download the v20o kdz then extract bin/fls files then flash with smartflash? will that work?
yup you can try that, i normally do that when bootlooped or bricked =P
same problem for me
Zaihanzainal said:
yup you can try that, i normally do that when bootlooped or bricked =P
Click to expand...
Click to collapse
still boot loop.
Hey buddy! I have same problem with you! I noticed that when i'm on stock rooted rom i always ended into bootloop going into recovery using either rom manager or quickboot. When i'm on custom rom like marvel, zeus etc. i also ended into bootloop going into recovery but after 1 hr or more, i will turn on the phone and then it will boot into recovery. I have a hard time flashing different custom rom because of this. Its like there is a time out before entering cwm recovery. It also happened to me everytime i used smartflash tool. It takes an hour before my phone got boot. 2 weeks ago someone upload a flashable V20s spain stock rom that has capable of entering cwm recovery after flashing the stock rom and luckily i manage to save it to my computer. I flash it using smartflash tool, after flashing it will reboot and then it will stock into bootloop. I will remove the battery and wait for atleast 1 hr and then i will turn on my phone and it will automatically boot into recovery. I do data factory reset, clear cache 1st then install superuser zip and then after that i flash the custom rom. I suggest that look for a flashable stock rom that has capable of entering cwm automatically after flashing and once you got the cwm do all you want but install first the superuser zip before flashing custom rom.
EDIT:
Here's the link buddy but i don't know if its available to download.
http://forum.xda-developers.com/showthread.php?t=1775994
Sent from my LG-P970 using xda app-developers app

how to go from devil recovery back to cwm

I've recently flashed the devil kernel to mess around with the JB roms. I'm wanting to go back to ICS roms while the JB roms mature. I booted into devil recovery, wipe then installed the CWM zip but says "status 0" aborted.
I've tried doing it through ROM manager but gives me errors that way also.
What am I doing wrong??
blackinches said:
I've recently flashed the devil kernel to mess around with the JB roms. I'm wanting to go back to ICS roms while the JB roms mature. I booted into devil recovery, wipe then installed the CWM zip but says "status 0" aborted.
I've tried doing it through ROM manager but gives me errors that way also.
What am I doing wrong??
Click to expand...
Click to collapse
Your mistake
1) Using Rom manager
2)Devil kernel uses both cwm and twrp recovery no need to "flash recovery" anyways.
If you can still get in to recover just flash what ever ICS rom you want. I'd advice full wipe and formating /system.
Sent from my SGH-I897 using Tapatalk 2
Same Problem, but i tried to flash with devil recovery. First, with cm10 it says installation aborted. Second time with cm9 he rebooted after 5 sec. and now it's in a boot loop.
What can I do to flash cm9 or cm10?
Pad10 said:
Same Problem, but i tried to flash with devil recovery. First, with cm10 it says installation aborted. Second time with cm9 he rebooted after 5 sec. and now it's in a boot loop.
What can I do to flash cm9 or cm10?
Click to expand...
Click to collapse
CM10 and devil kernel don't always get along. Something about the partition layout with devil. Anyway when you tried CM9 and it rebooted it just means it succeeded in flashing the kernel that CM9 comes with. Pull and replace the battery and 3 button combo back into recovery which will probably not be devil anymore. I don't think you have to but I typically go through the wipe procedure again and then you should be able to reflash CM9 without trouble.
m1batt1 said:
CM10 and devil kernel don't always get along. Something about the partition layout with devil. Anyway when you tried CM9 and it rebooted it just means it succeeded in flashing the kernel that CM9 comes with. Pull and replace the battery and 3 button combo back into recovery which will probably not be devil anymore. I don't think you have to but I typically go through the wipe procedure again and then you should be able to reflash CM9 without trouble.
Click to expand...
Click to collapse
I just flashed the cm9 and it didn't work, so I flashed cm10 and it worked apart from the google apps. It says Installation aborted. I tried to install it once again but it didn't help out.
What can I do now?
Pad10 said:
I just flashed the cm9 and it didn't work, so I flashed cm10 and it worked apart from the google apps. It says Installation aborted. I tried to install it once again but it didn't help out.
What can I do now?
Click to expand...
Click to collapse
the google apps package you have... is it the one for JellyBean?
m1batt1 said:
the google apps package you have... is it the one for JellyBean?
Click to expand...
Click to collapse
It's called "gaps-jb-20120726". The link is in the description of the cm10 thread.
Any help?
Help
Those ROMS use a different partition layout. You have to flash an older ROM via ODIN and then you'll be able to go back.
PantherZA said:
Those ROMS use a different partition layout. You have to flash an older ROM via ODIN and then you'll be able to go back.
Click to expand...
Click to collapse
Okay and how can I do that?
:laugh:
Any help?
Pad10 said:
Okay and how can I do that?
:laugh:
Click to expand...
Click to collapse
By utilizing the sticky threads that have all the information you need.
Pad10 said:
Any help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=746

Rooted Stock Gingerbread ROM bootlooping

Using CM10 usually and tried to install tantrums gapps v5.1
On rebooting got blank screen....no way to get into CWM again..
So, tried to install V20S gingerbread rooted ROM...installed superuser...rebooted..
Then also LG logo appearing....nothing happening...
I think bootlooping..
solution plz..
pvsukumars said:
Using CM10 usually and tried to install tantrums gapps v5.1
On rebooting got blank screen....no way to get into CWM again..
So, tried to install V20S gingerbread rooted ROM...installed superuser...rebooted..
Then also LG logo appearing....nothing happening...
I think bootlooping..
solution plz..
Click to expand...
Click to collapse
Try to install again the V20s patched via Smart Flash and after flash when the phone goes to CWM, wipe data/cache/dalwik cache. You should be ok.
All that things did 2-3 times....
Again bootlooping..
Months back I installed this same procedure that time worked successfully...
Now not working..I really don't understand what to do..
pvsukumars said:
All that things did 2-3 times....
Again bootlooping..
Months back I installed this same procedure that time worked successfully...
Now not working..I really don't understand what to do..
Click to expand...
Click to collapse
Try to download my v20s (in my noob how to) and flash this one with SmartflashTool. Then wipe data, cache and dalwik cache!
Hi, already flashed that u said from your thread and did wipes u said, still loop
2 months back, with same files, I have no problem
Now OK, i restored zeus from nandroid backup
But solution needed, as we need it in future for official update
Sent from my LG-P970 using xda premium
I had the same problem too when i switched to cm10 from rooted2.3 and back again.
I managed to solve it by wiping/data in recovery after flashing 2.3.
Sent from my LG-P970 using xda app-developers app
after flashing bin and fls
did you make wipe data and cache ?
if you dont make, phone goes brick... (bootlop)
yes I already did that...on 2 attempts of flashing...but again bootloop
Bootloop
finally nandroid backup of zeus 7 saved me...

[Q] PROBLEM!!! Can't flash anything bellow ics

Hi! I have an lg OB running ics 4.0.4(V30B). The phone it's rooted and I have CWM installed from Rom Manager. I can acces Recovery from Rom Manager and with the phone off ( VOLUME PLUS + G KEY). The problem is that I can't flash any Rom bellow ics (not even with Smart Flash Tools) without getting bootloops. I can flash Roms based on ics and above( IZS,CM10.1,NAMELESS ROM NIGHTLIES 4.4.4).
Could someone help me?
Nobody?
JoKeR[RO-VL] said:
Nobody?
Click to expand...
Click to collapse
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
androcraze said:
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
Click to expand...
Click to collapse
Man I can flash ICS-based ROMs .JB and KK, I can't flash GB stock or GB-based ROMs, not even with SFT.
I think the bootloader it's unlocked because I can acces CWM from switch off phone(key combo)....I am confused because i read many tutorials but they are contradictory
That happends also with me 2 times.
Just flash CWM recovery again.
ptxpaulo said:
That happends also with me 2 times.
Just flash CWM recovery again.
Click to expand...
Click to collapse
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
JoKeR[RO-VL] said:
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
Click to expand...
Click to collapse
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
ptxpaulo said:
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
Click to expand...
Click to collapse
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
JoKeR[RO-VL] said:
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1613183
ptxpaulo said:
http://forum.xda-developers.com/showthread.php?t=1613183
Click to expand...
Click to collapse
Doesn't work and its stuck on lg logo now
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
seby24gl said:
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
Click to expand...
Click to collapse
Did you unlocked the bootloader first? can you put a link with your froyo and SFT?
I am from Romania so I need an Europe Open
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
Thanks bro! Hope it works.
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
JoKeR[RO-VL] said:
Thanks bro! Hope it works.
Click to expand...
Click to collapse
It's not working. Don't know what to try
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
JoKeR[RO-VL] said:
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
Click to expand...
Click to collapse
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
JoKeR[RO-VL] said:
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
Click to expand...
Click to collapse
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
OK I have the terminal emulator on my phone.
I've read the thread and it says "Move this two files, bootloader and recovery to the root of memory sdcard;
Enter in the command line
su
dd if=/sdcard/u-boot.img of=/dev/block/mmcblk0p2
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
And reboot or reboot recovery."
I have downloaded all on my laptop(bootloader recovery and su) but I am confuse....what's with that "su"?
Do I have to put it on the root of the sdcard too?
Sorry for my noob question

Categories

Resources