Related
What is the ideal case for your Nook Color?
Is it one that is available or not?
What are some of the features you would like it to have?
Do you want a fold case that covers the screen?
Is the micro usb port in a convenient location?
Looking for some ideas. Working on a shell now for a mold. Not sure if anything will come of it but want to see what you all are looking for in a case. Feel free to post your thoughts. Thanks.
I would like to see a one sided hard cover that can protect the screen when not in use and snap onto the rear when in use. Probably use the typical four corner frame system you see in many cases so nothing is obstructed.
Also, have a stand "system" so that when it is snapped to the rear you can prop up the NC. Maybe something like what you see on back side of keyboards. And like some keyboards I've seen, have different levels of lift. One lift level that slightly raises the NC off the surface, for typing and such. Another lift level that is like the leg stand you see on the EVO 4G or Archos 70, for video/picture viewing and the like.
Heh. First post around here. Been meaning to chime in on a thread and this is the perfect one to start. Only because I've been looking for something I described but there is nothing out there yet.
I'm looking for an inexpensive silicone gel skin, something I'd keep on pretty much all the time. I'm also keeping my eyes open for sturdy travel case.
There seem to be choices out there for both, I'm just waiting a bit for more of them to hit ebay.
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
drp1 said:
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
Click to expand...
Click to collapse
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
techboydino said:
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
Click to expand...
Click to collapse
Are you designing desktop/multimedia cases as well? I would love additional speakers on the NC and also a magnetic swivel X mount stand for desktop use.
My ideal case is not available yet. It is an envelope-like case that will allow me to pull the Nook out and use it naked. Something in nice black leather.
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
bugeyed1 said:
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
Click to expand...
Click to collapse
Good Idea, I may try that out.
Im not any sort of professional or anything, but I do have access to some pretty sweet resin's and molding equipment. Carbon fiber is the idea, but the glass mold and how I want to do the front part comes first. Ill keep the thread updated.
ideal nook case
looking for something very close to this case
http://www.amazon.com/gp/product/B0040VNRTG/ref=oss_product
just substituting the swivel belt clip for a kickstand
i like the idea of moving the usb jack to another spot but i think that would add alot of cost and effort to the case build
Rube Goldberg lives; or, is this even possible?
You asked for the ideal, here is mine. Not at all sure it is doable....
1. In the interest of keeping the total package as slim as possible, no back, unless it is necessary to support other features.
2. [Front] cover has a slot for a pad of paper and/or corner slots for index cards.
3. [Front] cover is hinged on the right (I'm right handed and I want to be able to write easily).
4. [Front] cover has a foldover flap to keep the paper or cards from contacting the screen when the cover is closed.
5. The cover can fold 180 degrees so that the cover lies flat against the back of the tablet.
6. The cover can support the Nook as an easel in landscape mode.
7. The cover can support the Nook as an easel in portrait mode - this might involve some sort of short extension legs or other support to raise the lower edge of the Nook an inch or so (and this might help with the need to plug in the USB connector at the bottom).
8. Bonus points for the ability to fold out a handle attached at the lower left corner when in portrait mode, sort of like a hand mirror.
9. And of course it should be strong, light, durable, elegant, and less than $40 US.
I'm ready to order as soon as I see the pictures of the finished product.
Thanks for the ideas everyone. Haven't worked on it in a few due to being out at CES. Unfortunately there were NO cases out there. Working with Speck to find something but tried everything else and could not even find a nice slip cover. Otterbox said they are testing designs so no real info there either.
My ideal case is something like
http://shop.brando.com/samsung-galaxy-tab-case-with-bluetooth-keyboard_p05269c0299d057.html
this.
Bluetooth keyboard case, waiting for bluetooth to work for NOOK!! and I could use it as a netbook and a tablet. IDEAL.
This is my cheap (free) case for my nook color. It’s the zippered case for my trucks instruction manual. The patch covers the ford symbol; if I need to hide it in plain sight I can pull the patch off and leave it in the back seat. It fits perfectly and there is a plastic divider on the inside I can put business cards and a small pad of paper (as others have asked). All I keep in it is a set of skullcandy headphones in an microfiber Oakley sunglass bag for cleaning the screen.
michael
-"I learned a very valuable lesson on my travels, Tucker. No matter how bad things might seem..."
-"They could be worse?"
-"Nope, no matter how bad they seem, they can't be any better, and they can't be any worse, because that's the way things fraking are, and you better get used to it Nancy. Quit yer *****ing."
Perfect case for the Nook Color
Before I bought my Nook, I had a Pandigital Novel that I bought on eBay.
In the same eBay search results page the Novel appeared on was a great case called BookArmor. Although it was $35, I bought it. And I haven't regretted it either.
The BookArmor case comes with a set of velcro-like pads that stick on the back of the tablet and allow it to be fixed to the case. The case itself is laminated steel and plastic covered with textured fabric. It zippers shut and the zipper sides are soft and stay out of the way when the case is opened. You have total access to all side buttons and ports. The inside surface that comes in contact with the screen is covered with a soft foam pad.
When I decided to get the Nook, I found out that the case I had for the Novel is the exact same case for the Nook Color. I really like this case and haven't even considered another one.
For more info go to extremeinkjet.com and click on BookArmor cases in the blue left-hand column. Pick any Delta 6 case ... there is a Nook Color one. Checkout their video at the bottom of the page.
It looks like this case is really popular too ... there aren't any left on eBay and the extremeinkjet site shows all out of stock for the Delta 6 case. Amazon shows one Delta 6 left for the Pandigital (same case) but it doesn't even show up for Nook Color.
I don't know if I'd call it perfect. But, I bought the B&N case with the vertical flap and ribbon with magnet on the end to hold it closed/open. It works well for me.
If they were available in store when I bought my nook, I would have also considered the silicone one. Although, if I went that route, I'd probably prefer the otter box version with the hard resin exterior an rubber liner. I would also have considered the black leather pouch one where you completely remove the nook to use it.
Alas, none of these were available to me when I made my purchase so I'm using what I have.
With either the otter box or the silicone I would gain a thinner form factor. But, I would never be able to completely cover the screen. With the pouch one, I would gain the thin form factor when using and would not add much when transporting. But, it's basically just a branded leather sleeve.
In the end, what drew me to the case that I bought was the vertical flap and ribboned magnet. 1 - with the horizontal flapped ones, the magnet does not flip around to hold the flap to the back of the case so it's open like a book with the flap dangling out the right side. 2 - with the vertical one that I got, you flip the cover over the top, move the magnet to the back to hold the cover in place and you have all your nooky goodness to go to town with!
Just my 2 cents.
jlh8733 said:
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
Click to expand...
Click to collapse
Wow...love love love this idea.
This would be great..a hard protective slide case.
This would definitely be a $$$ maker.
I bought a "Industriell Cover in Storm" cover and it works perfectly, very simple, protects the screen, and it's small.
I'm stealing your "DON'T PANIC" sticker on the back idea. thanks for reminding me.
When I had the Eris I used some plexiglass and a heat gun to make a cradle but with the button placement and shape of the DInc, it was a bit harder to make so I designed a simple holder in SolidWorks to hold the phone vertically. It holds it by the bottom 1" of the phone and has a cut out for the charger. I attached it to my car using 3M exterior mounting tape(great stuff) and it has been working very well for me.
If you want one, just order it from here http://shpws.me/1wfv. However I think there is a minimum order from this place of $25 and takes about 3 weeks to get because they have to put it into their que to print and then it gets shipped from overseas.
I made another one today that is designed to hold the phone horizontally. It has cut-outs for the USB, volume and power buttons. I just designed it today and have not test fit it but it should work without a problem.
I made one thin http://shpws.me/1LD8 and another with thicker walls http://shpws.me/1wo0. The thin walled one works for my vertical holder but it is a bit flimsy so you might want to opt for the thicker one at a slight increase in production cost.
Added more
I have designed two more holders which I have just ordered today and when I get them I will let everyone know how they fit.
The design of these is such that they are to be made from Alumide (http://www.shapeways.com/materials/alumide) and can hold the phone wither you have the standard battery or the official HTC extended battery. These holders only hold the phone by the lower 3/4" vs the previous 1" in order to save in material and therefore cost.
An additional feature that I added to the horizontal holder is a sleeve that should hold, with some glue, the official HTC video output cable.
Vertical Holder $15.52 - http://shpws.me/1LC7
Horizontal Holder $21.03 - http://shpws.me/1LBU
Both together $33.09 (save $3.46) - http://shpws.me/1Ltv
See all the things I have designed here http://www.shapeways.com/shops/tbe
Note: Prices listed are if you get this made in Alumide, you can get this made in a bunch of other materials and can save some money if you get plastic, or if you have the money and want to show off you can get this in silver. These have a wall thickness of 1.5mm/.06in so make sure you choose a material that allows for that thickness.
Note 2: There is a minimum of $25 when purchasing from this site of if you only get one of them, you might want to look at something else. If someone has a special request. I made these for my own use but I am sharing them to the world so that others may benefit.
They came today
I received the two holders in the mail today and they are pretty much perfect. The material is much stiffer than the regular plastic and it has a sparkle to it. I did a test fit with both the standard and oem extended batteries and they both have a nice snug fit. However, if you use a case, then you are SOL. On the horizontal holder, the video cable also slides right in and is snug to where I don't think any adhesives will be needed.
I have posted some pictures on the shapeway website.
Also, if anyone likes it but would like a modification to it, let me know.
For those interested, I purchased the case here for my Focus S.
handhelditems.com/samsung-i937-focus-silicone-skin-case-black-p-178573.html
$3.09 shipped. Use promo code 20samsunghhi for 20% off. Total came to $2.47 shipped, and no tax!
Additionally, by ordering this product, they give you $1.00 store credit to use on your next order. I think I will order one of their $3.00 car adapters, and use the store credit. Not a bad deal IMHO.
Any who, quick run down. Its a simple silicone case, no front shield, with slots for the 3.5mm headphone jack, whatever the little dot is on the other side of the phone's top, the dedicated camera button, the rear speaker, the microusb slot and the little dot next to it, and the lens/flash. It has a slightly raised overlays on top of the power and sound buttons, but no open slots.
Fits snug enough, easy to put on and get off, does not catch bad in your pocket, and adds a bit of girth/depth to the phone I felt it was slightly lacking.
I got the plain black one, but they have lots of other abstract colors available for a slight premium.
Smells a little funny out of the box, but its not unbearable.
Shipped in 5 days.
Pictures attached for your viewing pleasure. (**would not let me attach, so imbedded**)**hell i can't even do that....**or post links ROFL
Enjoy!
links here:
img.photobucket.com/albums/v235/emjlr3/IMG_1544.jpg
img.photobucket.com/albums/v235/emjlr3/IMG_1545.jpg
just got the same thing on eBay from this seller
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320802848038
cheaper I believe.. I ordered internationally
Link does not work for me
Quick Amazon search (not signed in, no referral/affiliate link)
I never cared about the Dot View case, but I just ordered one. $9.30 with the NC state sales tax. Can't beat that. I guess I've been a little curious about them, since there are a lot of decent cases under ten bucks, but I pretty much sprung on this one.
No idea how long the sale is for. Could be over any time, really.
Bought one. Thanks!
Match price it at best buy and got it for $9.4O
Just make sure to get the one that is shipped and sold by Amazon. I got one last week for $12 and it is 100% genuine. Not the best case I have ever used, but for $12 It's a cool case for going out, and showing off.
dragontology said:
Quick Amazon search (not signed in, no referral/affiliate link)
I never cared about the Dot View case, but I just ordered one. $9.30 with the NC state sales tax. Can't beat that. I guess I've been a little curious about them, since there are a lot of decent cases under ten bucks, but I pretty much sprung on this one.
No idea how long the sale is for. Could be over any time, really.
Click to expand...
Click to collapse
mine takes like three weeks to get here
Can anyone confirm, that the M8 fits with the Dot view Case in the Car D190?
Regarding shipping, I ordered just before or after I posted, on a Saturday. They said it would be here Monday. It was here Tuesday. So 3 days instead of 2 (I have Amazon Prime).
The case fits but not completely. The bottom part fits like a glove. There's no mistaking how it fits in. Perfect fit. However the lid (the dot view part) does not close all the way. I have nothing on my screen, not even a screen protector.
The dot view gimmick is just that. You can swipe on the case but you have to really press. You might be surprised by how much pushing you have to do. You can't change the theme. You can't customize a thing about it. You can change the temperature units in Settings → HTC Weather. This is not very intuitive and it's not stated anywhere in the manual.
The magnet thing works great. When you open it, the screen comes on. When you close it, the phone goes to sleep.
Dark grey means grey that is not light. I wouldn't call it dark, either. It's just grey. It's similar to the gun metal grey finish of the phone (if you have that option — I do, except stupid PC Verizon calls it "metal grey" since "gun" is a bad word now) but matte, not glossy. And it extends the premium feel of your phone. It feels like a premium product. It feels like a genuine HTC accessory.
It does leave dot view smudges on your screen, but these are easily wiped off with a microfiber cloth, which every phone owner should have, anyway.
You can forget about one-hand usage. You will need the other hand to hold the case open while you text.
I use a FlyGrip and I have their case. The FlyGrip would not stick to the bare back of the HTC One M8. I don't know if that's because the adhesive doesn't bond to metal. It's peeled off my naked Samsung Galaxy S3 and two of its cases cleanly, so the bond is not permanent. I might try attaching my FlyGrip to the Dot View case, but what would be the point? The FlyGrip is made to accommodate one-handed phone use. Dot View prevents it. And with a FlyGrip, you gain a kickstand, but you just can't lay your phone flat on its back.
So now I have two cases, and though I meant to take the Dot View case to work, I just didn't bother taking my phone out of the FlyGrip case. I intend to keep the Dot View case, but probably won't. I have one IRL friend with a One M8, and I might let him try it out, but he only uses his phones naked. He doesn't like cases at all and thinks they're a waste of time that take away from the engineering of the phone — especially a nice one like ours. And I don't disagree, but I like the FlyGrip's utility. It's useful to me. It prevents drops. But it isn't cheap.
Bought a new one because it's cheaper, forgot it doesn't work well with my glass screen protector. =\
dragontology said:
The dot view gimmick is just that. You can swipe on the case but you have to really press. You might be surprised by how much pushing you have to do. You can't change the theme. You can't customize a thing about it.
Click to expand...
Click to collapse
Theme stuff is in the HTC Dot View app. If not on phone, then it's on Google Play.
Also if you're rooted, you can do a lot more, theme-wise.
I was lucky enough to be selected to receive an review one of the new Artech 21 cases for our LG G4's. I have always wanted to try a case like this because I like the concept of having my phone and wallet stuff combined, can't forget either that way (or both if I'm really scatter brained). Sadly, I never pulled the trigger due to my wife having had a couple and the quality just not being there a various points, enough to cause a total lack of will to try one for myself.
Enter Artech 21.
I received my case very quickly and packaged VERY well. No pics there, sorry. Let's just say that their attention to detail extends beyond simple production. I got it yesterday and immediately put it to use, and let me just sum it up like this. Simply stunning craftsmanship, and perfect in every way.
All pictures were taken on a Nikon D5000 using a 35mm f/1.8 lens for ambient light with some later flash shots and the really close ones towards the end were switched to a 18-55mm kit lens.
Let's just start with a couple of ambient light overview pics.
On the front side, we have a clean leather face with a reinforced spine stitch line down the left side, and a very classy and subtle company logo on the bottom right.
On the rear we have the same spine reinforcement stitching going down the right side, and very well sized and placed cutouts for the speaker and camera. Very very well done.
Throwing that one in simply because I like how the focal point and bokeh came out.
Opened up you can see I've already put it to use. It's housing my work ID card and drivers license in the clear thumb hole pocket (VERY good idea to put the thumb hole there, makes accessing those a snap). Also houses the two debit cards I carry along with my costco membership card.
The pocket underneath the cards won't hold a fully unfolded bill, but I wouldn't expect it to either. I don't carry a lot of cash so folding bills up to put in the pocket isn't a concern. If you do carry more than a few bills this may not work for you because they would bulk up the front side quickly. Money clips ftw.
The inside of the case is finished in a very fine suede to go wonderfully with the super nice leather exterior parts.
This pic above is a look at it closed. The clasp while small, is perfectly strong and small enough to be unintrusive. The back side never sits perfectly flat due to it's designed fold for stand usage, which isn't a big deal. Even with all my cards in the front side it still sits very flatly closed. Very well made in terms of size.
Flipped view on the bottom side. You can see how the back never lays truly flat, but this is by design.
Now, I want to move on to some good stuff. I've done sewing professionally on industrial machines, so I have a good idea what I'm looking at in terms of quality. And this case is just dripping with quality. The craftsmanship is absolutely fantastic. Extremely even stitching lines, wonderful stitch spacing, straight cuts, even the back stitching on the starts and ends is perfect. Here are some close up shots below:
Last part, the holder for the phone. This was a huge fail point on the couple of cases my wife had for her G2. There are ZERO worries here. Below are installed pics of either end:
The closest comparison I can make is that Artech 21 took an Incipio Feather case and used it in their folio case. The phone is VERY tightly held in place, but utilizes the least amount of shrouding possible at the same time. I have zero worries of the phone ever popping out of this holder and case.
I honestly have found no flaws with this case. It's new to me so using the phone is a little awkward at first, but I'm adjusting fast. Using my shoulder to hold the phone to my ear is actually much easier now due to the added case thickness. It holds what I NEED to carry with me with extra room to shove a days worth of receipts and a little cash, but without leaving enough room that I start packing my wallet full of stuff.
As far as recommendations for future changes or improvements, the only thing I could think of is the potential to make the magnetic clasp two sided so you could flip the front of the case all the way around and reuse the clasp to hold it open. And maybe give the option for people to have a ID card pocket installed on the front and not have the clear one in the inside (I'd choose that because I use my ID card to get into the plant I work at every day I work). But those are two very very minor things that aren't necessities, just feedback for possible future options.
One last parting shot for posterity sake:
I'd like to say thanks to Artech 21 for giving me the opportunity to try your wonderful case and just say that if you're looking for a wallet or folio case, by all means give them a try. They're worth every penny and you won't be disappointed.
Piggyback Review
I'm going to take the opportunity to piggyback on the review by Fastbird here and not clog up the accessories thread with 50 of these reviews on the same case.
To begin with, mine is the dark version of the case, and so aside from it's obvious dark color difference, it also has a full plastic case around the phone vs. a side-to-side hug case and the wrist strap. But enough talk, let's get into the case itself.
Opening the package reveals a few things, the case which looks, feels, and smells great; a wrist-strap (I chose not to use this), a business card, and a 10% coupon code for another product with a request for an Amazon review (to come later). Having used my phones naked for the past 4 years, a case, especially the folio wallet type, was quite a change, but after 3 days of use I'm completely adjusted to it. The case definitely adds some bulk to the phone as you’d expect, but my phone spends most of its time on a desk or somewhere else, not in my pocket. I’d say ladies with small pockets are not going to find this comfortable to have in there, and even for guys with tighter pants/jeans, it’d be the same deal.
The case is very well made, definitely had the touch of an Artisan in the stitching. You will notice the backing on the leather is most likely a nylon which is glued to the natural leather back and sewn around the edges. The front and back are both double layers of leather and the spine seems to be only a single layer. Holding it in your hand is easy enough when you fold the front around. As I mentioned earlier, the plastic phone case is a full edge case vs the light brown only hugging the sides. I use the Skinomi Tempered Glass protector on the screen and it doesn’t push any of the edges up. The phone definitely isn’t coming out of the case either.
Taking pictures in portrait mode is somewhat difficult because the back tends to want to fold around easily if you don't hold it right. If a way to lock this in until you want it to be a kickstand was developed, it’d be a major improvement. The cutouts on the back don’t get in the way of your shot and landscape is easy to manage. My cutouts aren’t quite centered, but it is such a small offset, you can't notice unless you are looking for it.
Closing the case comes easy because of the magnets in the clasp. However, if you want to really use it as a wallet, you’ll find it initially difficult to put more than three cards in the slots. I couldn’t get it closed with all four slots full. I don’t plan to really use it other than for cash because I have too many cards to fit in here anyway, but if you only have a few you use often, it could be really useful.
As a kickstand, I found no complaints. It doesn’t fall down, close or otherwise cause any problems if you are just watching a show. The cutout for the speaker does muffle it if it is closed and face up, but that’s what you get with a rear speaker phone.
Overall, if you want to make a statement with your phone, don’t already have a leather back, and plan to hold some cash, IDs, etc… then I say grab one of these cases. The best part about any case is that you can always take it off when you don’t want it and put it on when you do!
TL;DR
Pros:
- Hearty construction, high quality material, artisans touch
- Firm grip on the phone
- Card slots if you're into that
- Kickstand when you want it
- Wrist strap (dark version only)
- Keeps your phone safer than it is naked
- Color choices
- Compatible with glass screen protectors
- On sale on amazon right now! http://www.amazon.com/Artech-21-Premium-Italian-Handmade/dp/B00XKHWIG4/ref=sr_1_2?ie=UTF8&qid=1435201794&sr=8-2&keywords=artech+21+lg+g4
Cons:
- Floppy back when using portrait mode camera
- Needs some stretching to fit a card in every slot and close
- Probably too bulky for tight pants, jeans, short shorts, ladies pants, small pockets in general (although I think it'd be a problem without a case in some pockets too)
- Everyone is jealous!?!
Props to Artech 21 for making a superb product, allowing me to review it for free, and bringing some extra class to my already awesome LG G4.
So it's been nearly 2 weeks since I started using this case, figured I'd post up an update. I'll just say that I'm NOT going back to anything else. I just spent the past week on vacation in Gatlinburg/Pigeon Forge TN and having this case was remarkably not cumbersome at all and extremely convenient. Case is holding up fine, no signs of wear, no split seams, no pulled stitches. Holding up extremely well for the amount of use I gave it over the past week.
Sean , you better hide your id
and remarkable photography skill
I just want to say it looks poor quality!!!!!
james491225 said:
I just want to say it looks poor quality!!!!!
Click to expand...
Click to collapse
Not sure if serious or just plain stupid.
officerdoofy said:
Not sure if serious or just plain stupid.
Click to expand...
Click to collapse
plain stupid i guess
carolineOHIO said:
plain stupid i guess
Click to expand...
Click to collapse
I vote for stupid... or troll.
Like above, I too dont want to clutter up the accessories page with reviews of the same case so ill throw some additional pictures out there and give a few pros and cons for me.
PS: Im using a leather back on my phone, just a FYI
Pro:
- Leather quality looks and feels great
- Stitching was done with what looks like a good quality thread
- Glue that holds case to leather cannot be seen and holds the two parts together great
- Leather back phone fits very snug in the plastic holder, might be a con if it pops out, but for now its a pro
- Wireless charging works with a generation 1 Samsung charging pad
Cons:
- I can fit 3 cards in my case and it closes fine, when I put my 4th card the case sometimes opens up, and with the 5th card it never stays shut. I wanted to use the case and leave my wallet at home, but I unfortunately will not be able to, at least right now. I will give the case a few weeks with 4 cards in it and trying to stretch it out. If I can fit 6 cards in the case I can ditch the wallet completely and just put everything in this case.
One last note, its not really a con for me because I have big hands and long fingers but the thick leather might be hard for some users to hit the volume down button.
If you would like any additional photos or have any additional questions feel free to ask
UPDATE 1Well I just got to my office today and I was really excited to see if it would charge on the wareless charger....and even with the thick leather back it DOES! Now I'm sure it all depends on the charger you have, but I am using a 1st generation Samsung charging pad and it works perfectly with the phone. Im sure any newer name brand unit will also work, the china models, YMMV. Pictures below
UPDATE 2After having the case on the phone for less than a week the plastic holder for the phone has started to crack with the leather back on my phone. The cracks look minimal at the moment but I will keep an eye on them to see if they spread. Updated with pictures below.
UPDATE 3Well a week and a day in one of the corners is starting to crumble. The phone looks to be falling out of the case as well. Its a shame, since I absolutely love this case. Just in case anyone is wondering, I keep the phone in my back pocket at all times when walking aroud. I have never dropped it, sat on it or anything. This is just the wear and tare of having the leather back and pulling the phone in and out of my back pocket.
Below pictures are with no cards in the wallet
Below 2 pictures are with 5 cards in the wallet, ID and 4 debit cards
Below pictures are with 3 cards in the wallet, ID and 2 debit cards
Below pictures show the phone charging on a Samsung 1st generation chargin pad
Below pictures show the cracking in the plastic
Below picture show the crumbling of the plastic and the phone starting to fall out of the case
Posted updates #1 and #2 above. Will continue to update this review as I use it.
dtmcnamara said:
Posted updates #1 and #2 above. Will continue to update this review as I use it.
Click to expand...
Click to collapse
sorry for that inconvenience
I'd like to apply to review this case, but would like to know if the plastic cracking is an isolated issue or if it's being addressed in a newer version to be released for review. Thanks!
Thank you for sharing and the photograph great
dtmcnamara said:
Posted updates #1 and #2 above. Will continue to update this review as I use it.
Click to expand...
Click to collapse
Any idea how / why the cracks appeared? Like how do you use the case, do you put your phone/case in your pocket where it would get stressed? I ask because I store my phone in my pocket and wonder.
Posted update number 3 above. Looks like it might be time to retire this case already.
dtmcnamara said:
UPDATE 2After having the case on the phone for less than a week the plastic holder for the phone has started to crack with the leather back on my phone. The cracks look minimal at the moment but I will keep an eye on them to see if they spread. Updated with pictures below.
UPDATE 3Well a week and a day in one of the corners is starting to crumble. The phone looks to be falling out of the case as well. Its a shame, since I absolutely love this case. Just in case anyone is wondering, I keep the phone in my back pocket at all times when walking aroud. I have never dropped it, sat on it or anything. This is just the wear and tare of having the leather back and pulling the phone in and out of my back pocket.
Click to expand...
Click to collapse
So pocket stress in other words. Walking and bending in part crushing / extreme pressure to the case and phone.
This is why I usually keep mine in softer plyable tpu in my front pocket. I know just walking around and going up and down stairs I apply a lot of pressure on my phone and cases. I had other previous model phone in white cases that would form stress cracks. The black versions would be slightly more flexible and not crack. Used to be many people complaining about it being a manufacturers defect.
In larger pockets my phones would sometimes rotate horizontally. If i didnt catch and rerotate reposition the phone I wouldnt be surprised to find my screen cracked from the bending pressure.
Perhaps artech should redesign the inner holder would be my suggestion. Use a more plyable nylon material, instead of ridgid plastic?
Is it a hard clip on? How hard would it be to replace the inner holder? Would be easy for a user to do it?
My review
Just got my case in today JULY/25/15. So I will edit and update as time goes by using the case.
Initial thoughts;
First I must say it is a very nice solid yet soft and supple case. The color is like a natural imperfect tanned turmeric and honey. I really like the magnetic clasp. It auto locks, you can pull flap open and clasp detaches or you can manually flip it.
Was disappoint to see it does not have the ability to turn the phone on and off when opening and closing the case.
Update JULY/26/15;
The clip on portion is ultra thin and hard-rigid plastic. The case exposes the top and bottom, allowing for direct access to 3.5mm headphone jack, micro usb port, mics and remote IR.
Functionality that is missing for me is the ability to use the phone while the case is closed, it has to be flipped open to answer and stay open for the duration of the call. It does not have a front speaker cutout.
UPDATE August/02/2015, 1 week + 1 day;
Flip back kickstand is a nice feature. It allows for the phone to be propped up while watching videos / youtube.
With normal use the case as held up nicely, showing no signs of wear.
I've been able to remove and reinstall the phone several times and have not experienced any signs of the inner holder cracking.
It is still annoying to have to open the wallet and keep the cover open to talk on the phone. It makes it awkward to handle. I've also not wanted to crease the bind by flipping the cover all the way back. This makes the phone thicker and harder to hold for smaller to medium sized hands.
So far I would recommend this case for those that like a wallet you can carry your phone in. Although what fits into it as a wallet is very limited. Perhaps better to call it a stylish leather case capable of protecting the phone and holding some important essentials.
..to be continued..
clockcycle said:
Any idea how / why the cracks appeared? Like how do you use the case, do you put your phone/case in your pocket where it would get stressed? I ask because I store my phone in my pocket and wonder.
Click to expand...
Click to collapse
the cracker due to frequently take the phone out with innappropriate way
should gently hold the case , press the camera hole to take the phone out
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
clockcycle said:
Just got my case in today JULY/25/15. So I will edit and update as time goes by using the case.
Initial thoughts;
First I must say it is a very nice solid yet soft and supple case. The color is like a natural imperfect tanned turmeric and honey. I really like the magnetic clasp. It auto locks, you can pull flap open and clasp detaches or you can manually flip it.
Was disappoint to see it does not have the ability to turn the phone on and off when opening and closing the case.
Update JULY/26/15;
The clip on potion is ultra thin and hard rigid plastic. The case exposes the top and bottom, allowing for direct access to 3.5mm head phone jack, micro usb port, mics and IR.
Functionality that is missing for me is the ability to use the phone while the case is closed, it has to be flipped open to answer and stay open for the duration of the call. It does not have a front speaker cutout.
..to be continued..
Click to expand...
Click to collapse
it is no automatic for the wake up due to we have no certification from LG , and we think we just keep it traditional way to use the wallet case
Leather quality looks and feels great!! It is very useful for me to put cards.
hahahayiji said:
Leather quality looks and feels great!! It is very useful for me to put cards.
Click to expand...
Click to collapse
maybe you I.D too