Database Develop

[Q] [Help]Can't Get into Open Recovery screen after using 2.2.1 Brasil-Retail

Hi, I'm having a lot of trouble getting open recovery to work on my milestone after flashing the brasil 2.2.1 retail rom.
The bootloader is the same 90.78.
Here's what I did.
I flashed a brasil 2.1 retail rom on my milestone and then used the motorola update tool to get it to 2.2.1.
After a few problems with the retail 2.2 (mostly the screen gets blank for a long time if a call is not anwsered.) i decided to go back to the shadowmod rom which I'm used to.
So, I downgraded back to the 2.1 retail rom, and then flashed the openrecovery found here code.google.com/p/shadowmodbr/downloads/list (MILESTONE_BASE_2.2.1.zip)
Used the open recovery listed there (used to work fine), placed the OR folder and update.zip on the SD card... and after everything was ready, I went to the recovery screen (holding "x" and the camera button) when I got to the Triangle+exclamation mark screen, I pressed VOL UP + Camera Button and NOTHING HAPPENED!
I tried the whole process again with the same result.
I found other VRs here on xda dev foruns, downloaded one specific for the 90.78 bootloader, about 3mb in size (the one on Shadowmod's site is 18mb big) but I can't flash it. RSD lite greyed out the start button once I select this file.
So I'm stuck, I can't get OR working, can't flash any custom roms, and I'm stuck with this problematic official rom =/
Anyone have any Idea about what can I do to get or working?

Do you get any errors in bootloader mode? If no, try flashing GOT 2.2.1 sbf file. Its got vulnerable recovery injected.
If rsdlite doesn't highlight the start button, try renaming the sbf file to something smaller.
Sent from my MILESTONE using Tapatalk

flash a stock 2.0/2.1 rom? sbf file
Sent from my Milestone using XDA App

sileshn said:
Do you get any errors in bootloader mode? If no, try flashing GOT 2.2.1 sbf file. Its got vulnerable recovery injected.
If rsdlite doesn't highlight the start button, try renaming the sbf file to something smaller.
Sent from my MILESTONE using Tapatalk
Click to expand...
Click to collapse
This is the thread that sileshn sent me when I had trouble with RSD Lite not starting: http://androidforums.com/droid-all-...hing-process-0x7100-rsd-lite.html#post1274587

sileshn said:
Do you get any errors in bootloader mode? If no, try flashing GOT 2.2.1 sbf file. Its got vulnerable recovery injected.
If rsdlite doesn't highlight the start button, try renaming the sbf file to something smaller.
Sent from my MILESTONE using Tapatalk
Click to expand...
Click to collapse
No, no, absolutely no error flashing..
As I said, before migrating to the oficial retail 2.2.1, the process I wrote about worked flawlessly.
Can you please provide a link to this GOT 2.2.1 rom you mentioned?
Thanks in advance.

blackomegatm said:
No, no, absolutely no error flashing..
As I said, before migrating to the oficial retail 2.2.1, the process I wrote about worked flawlessly.
Can you please provide a link to this GOT 2.2.1 rom you mentioned?
Thanks in advance.
Click to expand...
Click to collapse
Dude, flash this sbf using rsd lite. http://www.droid-developers.org/files/uploads//BL_9078_umts_sholes_GC_HS_Consumer_replacer.zip
I'm pretty sure after this you be able to access the OR
Sent from my Milestone using XDA Premium App

blackomegatm said:
Can you please provide a link to this GOT 2.2.1 rom you mentioned?
Thanks in advance.
Click to expand...
Click to collapse
http://groupoften.wordpress.com/2010/10/16/g-o-t-2-2-1-released/
Select anyone. Then flash CM or whatever you want over it using AOR. Don't forget to wipe all.
And if you need to flash only the VR in future, only use this.

You guys might think I'm joking, but I tried flashing every one of the GOT roms (flash went OK, no errors), the vulnerable recovery sleshn posted (RAMDLD90_78.zip, no errors flashing too), and I'm still not having any success getting into the OR.
I sent my milestone to motorola two weeks ago, could it be that they modified something on it to block this exploit?
The bootloader still says version 90.78, but I can't get into the recovery screen at all, isn't there another command besides Vol Up + camera btn to acess the OR?
I'm about to give up =[

I think Joe aka Zeppelinrox has created a script to get you into OR menu automatically. You can pm him. I will post the link here if i find it. I think it is in a thread called handy dandy fixes.
Sent from my MILESTONE using Tapatalk

sileshn said:
I think Joe aka Zeppelinrox has created a script to get you into OR menu automatically. You can pm him. I will post the link here if i find it. I think it is in a thread called handy dandy fixes.
Sent from my MILESTONE using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1001350
There's the link for Handy Dandy Fixes.
Sent from my Milestone using XDA Premium App

It is in the androidiani OR thread. This is the post.
http://forum.xda-developers.com/showthread.php?p=12608504
Sent from my MILESTONE using Tapatalk

Wow, thanks for the tip, this thread has some useful information.
I'll try that later, as I need to rest a bit, I've been writing my final paper for graduation at my universit for 5 hours straight now...
I'll post the results once I try it.

YAY ! IT WORKS!!!!!!!!!!!!!!!!!!!!!!!
Oh, I so relieved now, let me hack this phone apart now.
THANK YOU GUYS !

Of course it works
I mean, I'm glad it worked for you lol

Glad it works
So what are you planning on doing to "hack this phone"?

actually, i dissembled the whole thing today, after I found out that motorola shiped it back with the camera button mounted backwards.. When I pressed it, is started the camera but wasn't really working.. after placing the button in place like it should be, now the open recovery works again by pressing the vol up camera and the camera button, as it should have...
I lost my warranty, but a was about to lose it this month anyway... I'm just glad everything works as it shoud now.

Motorola mis-mounted their own camera button? Sounds like some awesome support haha.
Sent from my Milestone using XDA Premium App

I'm having the same problem but unfortunately it appears the fix requires android to be functioning on the device....Is there any other way? I'm sitting at the triangle with exclamation mark and OR just doesn't want to open! My bootloader is .74 so it should be the CAM+VOL but it doesn't work!
Thanks
--Phil

[Q] SBF recovery = "passed" but bootloops [URGENT]

For unknown reasons, the SBF recovery in RSD lite 5.5 comes up with a "pass" result when the SBF itself actually fails. It runs like it worked, but on the final reboot, I get an endless bootloop.
Backstory:
I made a rom, flashed it, bootloop, go to SBF, SBF passes but bootloops.
*ps i've tried it 4 additional times and each time still bootloops even though it says "pass"
I've done this at least 4 times in the past 3 days trying to get my rom to flash. What the FUUUUUUUUUU*K is it doing this for now?

Wipe data/cache after you SBF.
Sent from my DROID3 using xda premium

kshen1 said:
Wipe data/cache after you SBF.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
I can't get into anything.
The SBF bootloops.

did you try a battery pull and booting into recovery

shane1 said:
did you try a battery pull and booting into recovery
Click to expand...
Click to collapse
battery pull over 20 times at least.
no more cwm, i sbf'd. everything is stock. 100% stock. but bootlooping.

Try to flash the chinese rom, see if it boot then flash back the verizon rom.

The Solutor said:
Try to flash the chinese rom, see if it boot then flash back the verizon rom.
Click to expand...
Click to collapse
What the f...No don't do this.
Did you download the correct SBF for your system version? I know there are both 959 and 890 SBFs out there.
Sent from my DROID3 using xda premium

You wont have CWM after doing the SBF but you can still boot into the stock moto recovery and wipe data/cache

kshen1 said:
What the f...No don't do this.
Click to expand...
Click to collapse
And why

The Solutor said:
And why
Click to expand...
Click to collapse
Different phone, different everything.
lordgodgeneral said:
You wont have CWM after doing the SBF but you can still boot into the stock moto recovery and wipe data/cache
Click to expand...
Click to collapse
I can still do that? I'll try that and give it a go when I get back home. I thought the stock recovery had no options though....
kshen1;18233443 said:
Did you download the correct SBF for your system version? I know there are both 959 and 890 SBFs out there.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Yep, been using the same one the whole time, 890.
Sent from my dad's DROIDX using XDA App

dpwhitty11 said:
Different phone, different /system.
Click to expand...
Click to collapse
And then ?
I suggested this way purposely, because the different organization will lead to a wiped phone.

The Solutor said:
And then ?
I suggested this way purposely, because the different organization will lead to a wiped phone.
Click to expand...
Click to collapse
Its a different model phone. It would be a brick, not a bootloop, if I did that.
Sent from my DROIDX using XDA App

The Solutor said:
And then ?
I suggested this way purposely, because the different organization will lead to a wiped phone.
Click to expand...
Click to collapse
Lmao...
Dpwhitty go into stock recovery after sbf and wipe data.
Sent from my DROID3 using xda premium

kshen1 said:
Lmao...
Dpwhitty go into stock recovery after sbf and wipe data.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
lol, that guy....
Kshen, I left my phone at home, i'll do that when I get back.
Sent from my DROIDX using XDA App

I go into recovery and I get the little android guy and that white triangle with the orange exclamation mark inside it. No options or menus in there.

dpwhitty11 said:
Its a different model phone. It would be a brick, not a bootloop, if I did that.
Click to expand...
Click to collapse
Is better to open the mouth having something useful to say, and not to spread urban legends.
(for the record I have the chinese rom installed on my phone, which is a verizon phone.)
Is a way better rom in many areas, but my purpose was not to suggest a different rom, but to solve a problem, with a safe solution, as I'm used to do in the last 30 years.

dpwhitty11 said:
I go into recovery and I get the little android guy and that white triangle with the orange exclamation mark inside it. No options or menus in there.
Click to expand...
Click to collapse
Press in both volume keys. That'll bring up some options. You'll see factory reset/wipe data there
Sent from my DROID3 using XDA App

erismaster said:
Press in both volume keys. That'll bring up some options. You'll see factory reset/wipe data there
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
That worked.
Thank you so much guys, thought I was a goner for a while.

The Solutor said:
Is better to open the mouth having something useful to say, and not to spread urban legends.
(for the record I have the chinese rom installed on my phone, which is a verizon phone.)
Is a way better rom in many areas, but my purpose was not to suggest a different rom, but to solve a problem, with a safe solution, as I'm used to do in the last 30 years.
Click to expand...
Click to collapse
Ok
Sent from my DROID3 using xda premium

dpwhitty11 said:
That worked.
Thank you so much guys, thought I was a goner for a while.
Click to expand...
Click to collapse
Yeah NP haha I knew wiping data would solve the issue
Sent from my DROID3 using xda premium

Install any OTA (incl *4.2.2*) with stock recovery - don't wait for Google!

Quick instructions if you are stock, unrooted without CWM. You MUST have unlocked your bootloader and have ADB (Android SDK installed) already for this to work.
You must be on 4.2.1 (JOP40D) to upgrade to 4.2.2 (JDQ39) using this method.
1. Download this to your computer -> http://android.clients.google.com/p...4.signed-occam-JDQ39-from-JOP40D.de8b8d10.zip
2. Turn off your phone
3. Hold down Volume - and Power to get into Fastboot
4. Scroll down to Recovery and enter.
5. On the No Command Android screen hold Power and Volume + to get to menu. Might take a few attempts to get timing right
6. On the menu select Update from ADB
7. Connect your phone to computer with USB
8. On computer type "adb sideload de8b8d101614.signed-occam-JDQ39-from-JOP40D.de8b8d10.zip"
9. You should then see this output: "sending: 'sideload' 100%"
10. Your phone screen will say System Update or something and it will install the OTA.
Once done just select reboot in recovery and you're done. You can use this method for ALL future OTAs - all you need is the update zip. This works on all Nexus including Nexus 7, assuming Nexus 10 and GNexus.
No longer need to wait for OTAs. Enjoy!
UPDATED FOR 4.2.2

Are you saying you can downgrade this way too?
Sent from my Nexus 4 using Tapatalk 2

tinky1 said:
Are you saying you can downgrade this way too?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Doubt it but you're welcome to try. All this does is flash the update.zip using stock recovery. I'm assuming if the zip you flash wipes system and installs an older version it might work but you couldn't just flash an OTA for an old version, that wouldn't work. If you're downgrading, best to flash CWM recovery and use that.

good .yes buhuishuo .ok

What folder does the update need to be in for the sideload to work.
Sent from my Nexus 4 using xda premium

FatalityBoyZahy said:
What folder does the update need to be in for the sideload to work.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
In adb folder since path is not specified. If you specify path in cmd then anywhere.
Sent from my Nexus 4 using Tapatalk 2

mobilehavoc said:
Quick instructions if you are stock, unrooted without CWM. You MUST have unlocked your bootloader and have ADB (Android SDK installed) already for this to work.
Click to expand...
Click to collapse
Your bootloader has to be unlocked? Are you sure about that?

MaxCarnage said:
Your bootloader has to be unlocked? Are you sure about that?
Click to expand...
Click to collapse
Give it a go with locked one. It might not take adb cmds when locked, but if it does, then I don't see a problem since it's a signed ota. It's the question wherever "sideload" is accepted with locked bootloader. I'll give it a try now.
Sent from my Nexus 4 using Tapatalk 2

tinky1 said:
Give it a go with locked one. It might not take adb cmds when locked, but if it does, then I don't see a problem since it's a signed ota. It's the question wherever "sideload" is accepted with locked bootloader. I'll give it a try now.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I'm at work without ADB so I would have to do it when I got home.

You wont need an unlocked bootloader and you wont be able to downgrade.
OTA updates are very specific, check the file name of this one, it's JOP40C > JOP40D

Worked fine for me without unlocking my bootloader.

Hmmm, every time i get to power and +vol i end up with battery icon.
btw, savo yourself hassle. enable usb debugging and type
Code:
adb reboot recovery
I can't get into menu..

Done.
I think step 5 can be more clearly worded like this:
5. When you see a red triangle on the android robot, press and hold power button AND quickly press Volume+.

damn. I can't get it to work. After entering cmd it just throws all the adb cmd's up.

tinky1 said:
damn. I can't get it to work. After entering cmd it just throws all the adb cmd's up.
Click to expand...
Click to collapse
same here on stock rom, stock recovery, no root, locked bootloader.

Is your version of adb up to date?

Rusty! said:
Is your version of adb up to date?
Click to expand...
Click to collapse
Seems to do everything else... I'm using my standalone pack, but it might need updating. Could you upload needed files please? With fastboot.
Sent from my Nexus 4 using Tapatalk 2

tinky1 said:
Seems to do everything else... I'm using my standalone pack, but it might need updating. Could you upload needed files please? With fastboot.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Here(see step #3):http://forum.xda-developers.com/showthread.php?t=1972508

Rusty! said:
Is your version of adb up to date?
Click to expand...
Click to collapse
Thanks for that idea. No, i haven't updated it ever. I never thought of it either. I'm omw to work, so I'll try that later. I see others in the USA posting they received ota already. Im wondering if its not available to me yet because i bought mine through Tmobile? Would this cause a small delay, do u think?
Sent from my Nexus 4 using xda premium

Arhtard said:
Thanks for that idea. No, i haven't updated it ever. I never thought of it either. I'm omw to work, so I'll try that later. I see others in the USA posting they received ota already. Im wondering if its not available to me yet because i bought mine through Tmobile? Would this cause a small delay, do u think?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I haven't got mine either in UK.
Sent from my Nexus 4 using Tapatalk 2
Edit. Yup, out of date adb was at fault. Worked

TWRP 2.7.1.0

Not my project but thought this might help people find it: TWRP 2.7.1.0 for KK Bootloaders by dhacker29
http://androidhosting.org/Devs/Dhacker29/msm8960/
Edit: To avoid confusion I changed the link to the one RikRong posted that will give you the M only version. File name: TWRP2710-RAZR_M-KITKAT.img.
Edit2: Looks like the links are down so here is a link to a post that @rahimali provided in this thread. Its for TWRP 2.8 and 2.7.1.0.
http://forum.xda-developers.com/showpost.php?p=56420813&postcount=28

already had it, but thanks

allen_ho said:
already had it, but thanks
Click to expand...
Click to collapse
This works on the M?

RedBullet said:
This works on the M?
Click to expand...
Click to collapse
That one does not, but you can get the correct one here: http://androidhosting.org/Devs/Dhacker29/msm8960/
Sent from my HTC6525LVW using Tapatalk

RikRong said:
That one does not, but you can get the correct one here: http://androidhosting.org/Devs/Dhacker29/msm8960/
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Which one exactly?

RedBullet said:
Which one exactly?
Click to expand...
Click to collapse
One that says M instead of HD
Sent from my XT907 using Tapatalk 2

anyone else have a problem with this not recognizing the touch commands and just basically acting like its frozen? Nothing works I left it for awhile and came back to it and tried to open the slide lock and it doesn't do anything. The battery is fully charged so what I guess I have to do is wait for the thing to die so I can get out of recovery.
UPDATE: Still not working for me but I was able to shut it down by pressing the Power + Volumes Up and Down Keys

argedion said:
anyone else have a problem with this not recognizing the touch commands and just basically acting like its frozen? Nothing works I left it for awhile and came back to it and tried to open the slide lock and it doesn't do anything. The battery is fully charged so what I guess I have to do is wait for the thing to die so I can get out of recovery.
UPDATE: Still not working for me but I was able to shut it down by pressing the Power + Volumes Up and Down Keys
Click to expand...
Click to collapse
I don't ... But which version are you on... The correct one that RikRong linked?
Sent from my XT907 using XDA Premium 4 mobile app

ezknives said:
I don't ... But which version are you on... The correct one that RikRong linked?
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes I downloaded the correct one from RikRong and it was the one that says:
TWRP2710-RAZR_M-KITKAT.img
I redownloaded it and tried again but still no avail. Touch just refuses to work with this for me. So I'll just have to stick to 2630

argedion said:
Yes I downloaded the correct one from RikRong and it was the one that says:
TWRP2710-RAZR_M-KITKAT.img
I redownloaded it and tried again but still no avail. Touch just refuses to work with this for me. So I'll just have to stick to 2630
Click to expand...
Click to collapse
That's strange, I haven't had that issue either. Maybe a bad DL? Try downloading and flashing again.

maybe a different means of flashing it too...
Sent from my XT907 using XDA Premium 4 mobile app

ezknives said:
maybe a different means of flashing it too...
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how else should i flash it?
fastboot flash recovery "Image"
this is all I know?

It was a long shot but there is flashify and rashr...
Sent from my XT907 using XDA Premium 4 mobile app

argedion said:
anyone else have a problem with this not recognizing the touch commands and just basically acting like its frozen? Nothing works I left it for awhile and came back to it and tried to open the slide lock and it doesn't do anything. The battery is fully charged so what I guess I have to do is wait for the thing to die so I can get out of recovery.
UPDATE: Still not working for me but I was able to shut it down by pressing the Power + Volumes Up and Down Keys
Click to expand...
Click to collapse
:: ditto ::
no luck with twrp so switched back to cwm. i also flashed the same way using fastboot

well I'll give the flashy a try and see but I think its more an issue with my phone. but I got time to play so we'll give it a shot.
Ok tried doing it with flashy and still the same result just no touch at all so I just give up with this and will stick with the one that works for me

argedion said:
well I'll give the flashy a try and see but I think its more an issue with my phone. but I got time to play so we'll give it a shot.
Ok tried doing it with flashy and still the same result just no touch at all so I just give up with this and will stick with the one that works for me
Click to expand...
Click to collapse
Are you on the KK bootloader? I believe its a requirement. I used rashr to flash it myself.

danbest82 said:
Are you on the KK bootloader? I believe its a requirement. I used rashr to flash it myself.
Click to expand...
Click to collapse
Looking at my bootloader I do not think I am on the KK bootloader it gives me a date of 2013-09-25 I am assuming that is the original bootloader that it came with. Guess I'll do a search for the KK bootloader and see if I can get that flashed over.

argedion said:
Looking at my bootloader I do not think I am on the KK bootloader it gives me a date of 2013-09-25 I am assuming that is the original bootloader that it came with. Guess I'll do a search for the KK bootloader and see if I can get that flashed over.
Click to expand...
Click to collapse
To get the KK bootloader, I flashed the latest OTA through rsd lite. It should keep the boot loader unlocked but will remove root. If you plan on using a stock ROM, Q9Nap's GPE is very smooth and stable. Their thread gives links and instructions on how to flash OTA.

So the Frog has officially Croaked his Phone.
Yes you heard right I have managed to kill my phone. Only good thing is that I couldn't use it for much more than a mini wifi tablet so I didn't really loose anything.
I could not get Twrp 2710 to work was because I had the old boot loader So I decided to update the boot loader which I did but now the phone will not go out of the boot logo screen. I have successfully reinstalled my ROM and still will not go past the boot logo screen. I have tried fastbooting back to the old bootloader but no luck there either. I have spent about 2.5 hours this morning trying different things to get it to work and nothing I have found or came across will work. I have however successfully installed twrp 2710 and now have it working. Considering that is the only area of the phone That I can actually get into i guess thats something.

Some of the older Roms won't boot on the kk kernel they will not boot past the boot logo... When you upgraded did you flash the entire kk firmware via rsd? And it wouldn't boot past the boot logo...
Sent from my XT907 using XDA Premium 4 mobile app

[Q] is it Safe to Flash French 5.0 Ota Update on Indian Moto x?

i have not got update yet. should i flash french or europe update?
what it gona do, will it change my phone location from india to another? will i be recieving OTA for indian Moto?
if its not effecting any thing agianst then why they dont provide this update to every moto x? sorry i have less knoweldge about it..
Please tell me clearly
thanks.

Mandeep148 said:
i have not got update yet. should i flash french or europe update?
what it gona do, will it change my phone location from india to another? will i be recieving OTA for indian Moto?
if its not effecting any thing agianst then why they dont provide this update to every moto x? sorry i have less knoweldge about it..
Please tell me clearly
thanks.
Click to expand...
Click to collapse
if you are locked and it flashes it should be safe, if it doesn' t flash you are safe too

godutch said:
if you are locked and it flashes it should be safe, if it doesn' t flash you are safe too
Click to expand...
Click to collapse
should i try french one?
that link
http://www.mediafire.com/download/gb....en.EU.zip.zip ?

Yes. All the moto x are made by moto.
Sent from my XT1060

steven0422 said:
Yes. All the moto x are made by moto.
Sent from my XT1060
Click to expand...
Click to collapse
that' s not the reason, it' s because the ota checks your compleet system to see if the ota is compatible, if signatures don' t match the ota won't apply

godutch said:
that' s not the reason, it' s because the ota checks your compleet system to see if the ota is compatible, if signatures don' t match the ota won't apply
Click to expand...
Click to collapse
People may get irritate with me by repeating same question, but im doing for good.
Because people those are installing update they have no info officially, I just want to care, suppose if my device got problem in hardware after 2 months I go to service center and they say sorry your device is imported or software wise modified. So that's why.
Sent from my XT1092 using XDA Free mobile app

Mandeep148 said:
People may get irritate with me by repeating same question, but im doing for good.
Because people those are installing update they have no info officially, I just want to care, suppose if my device got problem in hardware after 2 months I go to service center and they say sorry your device is imported or software wise modified. So that's why.
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
If the bootloader is locked it will only boot up if the software is oficial and only oficial software updates will apply

godutch said:
If the bootloader is locked it will only boot up if the software is oficial and only oficial software updates will apply
Click to expand...
Click to collapse
OK I'm going to apply update, I did volume down + power then where to go?
Sent from my XT1092 using XDA Free mobile app

Mandeep148 said:
OK I'm going to apply update, I did volume down + power then where to go?
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
select recovery, in recovery push and release vol up + power, and use adb sideload update.zip to sideload it or rename the update.zip to update.zip and save it to the root of the sdcard and chose to apply update from sdcard

godutch said:
select recovery, in recovery push and release vol up + power, and use adb sideload update.zip to sideload it or rename the update.zip to update.zip and save it to the root of the sdcard and chose to apply update from sdcard
Click to expand...
Click to collapse
Thanks where and how can I copy to root, just out of all folder?
Sent from my XT1092 using XDA Free mobile app

Mandeep148 said:
Thanks where and how can I copy to root, just out of all folder?
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
just use windows, the root of the sdcard will open when you open the phone