Cyanogen 7.1.0 networking problems - XPERIA X8 Q&A, Help & Troubleshooting

Hello, i would appreciate if you could help me or at least tell me where to find answers for my questions. The search didn't help me (maybe i'm stupid or dont know what).
SE Xperia x8 E15i
Cyanogen 7.1.0-x8 (build number 3.0.1.A.0.145
Baseband M76XX-TSNCJOLYM-5340415
Wifi, first time i installed rom, it worked for few sec, after that it shows that it is connected to router but there is no connection (wifi signal is white). Rebooting doest help, also tried to install same rom again, doesnt help.
3g, also on status bar it shows that 3g is on but i have no upload/download.
maybe also significant, when i try to select network operator (search networks) it lasts really long and at the end shows up and error and i cant select any(both automatically and manually).
Sorry for my bad English, its not my frst language.
thanks

Look here:
forum.xda-developers.com/showpost.php?p=19187110&postcount=2407

dbts25 said:
Look here:
forum.xda-developers.com/showpost.php?p=19187110&postcount=2407
Click to expand...
Click to collapse
Man, thank you so much. Works like a charm!
Thanks!!

Related

help with Crossbow

Hey
Iv just installed crossbow succesfully in my wizard
the problem i am facing is that I am unable to start the phone app
and the signal always says no service
Iv checked the GSM it is still there
any help is appreciated
Thanks in advance
This happened to me this morning... I went to the Communications Manager, ticked the phone application to stop it (although it was already stopped) and ticked it again to restart.
Phone's working fine now. Good luck!
yellowdragon said:
This happened to me this morning... I went to the Communications Manager, ticked the phone application to stop it (although it was already stopped) and ticked it again to restart.
Phone's working fine now. Good luck!
Click to expand...
Click to collapse
thank you for your reply
may I know what crossbow Rom ur using ??
and may I know ur radio version ??
thanks again
Because I tried the above steps the phone app still does not start
corleno said:
thank you for your reply
may I know what crossbow Rom ur using ??
and may I know ur radio version ??
thanks again
Because I tried the above steps the phone app still does not start
Click to expand...
Click to collapse
Thats why everyone should have a good signature.. like mine
Corleno;
Sorry for being so vague Right now I'm using Crossbow Most Beautiful version, radio ROM is 2.19.11 (included in the firmware)... Before that I was using the Underground version and I flashed radio 2.47... That combo was so-so... Had a lot of echoes especially from a landline of a specific interchange area.
Does the phone app gives you an error message or the little antenna icon just keeps searching and searching? Have you tried using another SIM card?
Please let me know...
Good luck!
Hanmin;
Guess now I should do what you say...

Problems with Wifi after installing Official Gps Rom update

Hello,
does anybody who had a similar problem can help me?
After installing the latest Italian ROM update from HTC site (enabling GPS) the wifi connection does not work anymore.
When I tip on the wireless icon in the Comm Manager the icon on the screen become a small antenna but it does try to find new networks.
If I go on the network adapters menu I can’t find available networks but only the option to manually add a new network.
I have tried with an hard reset but the problem persists. Of course before installing the update everything was working perfectly.
Thanks
Marco
Hello!
With official English update is the same.
Any solution?
Trdonja said:
Hello!
With official English update is the same.
Any solution?
Click to expand...
Click to collapse
I'm using official WWE ROM and everything is working fine with Wi-Fi
KaYs3r said:
I'm using official WWE ROM and everything is working fine with Wi-Fi
Click to expand...
Click to collapse
the same for me...
everything works as it should....
Did you tried to move the cursor of WiFi power management to the left?
When you flash a new ROM it goes to the maximum power saving (right position).
With this setting I had troubles to connect to Access Points also with the original ROM.
Hope this will help
Bye
Marco
Same problem here with the German ROM update..........

continuous signal loss

Hi all,
after several HTC and SonyEricsson phones I landed to an LG Optimus 2x, but I found lots of probs.
With the original Rom I had good signal but it was laggy, with the famous GPS issue, etc. I then installe d a leakd v20o (stock) and solved speed and GPS issues, but now I have CONTINUOUS signal loss.
Sometimes I have no signal and have to switch the device on and off to get it back, sometimes it looks like there's signal but as soon as I try to put a call it says "no signal".
Now I wonder which rom should I use to have both speed and GPS as well as a good signal (and here I mean than when it loses it also recver it fast)
Actual baseband is: 1035.21_20110725
any suggestion?
thank you
I am not sure but maybe you have to change the RIL version. Look up the app "GetRIL" in the market.
Sorry mate if this' goin' to look N00b to you but... how do I choose the right RIL?
EDIT: Nevermind, I found that the app tells you the rmatching one.. goin' to try it
JapanLover said:
Sorry mate if this' goin' to look N00b to you but... how do I choose the right RIL?
EDIT: Nevermind, I found that the app tells you the rmatching one.. goin' to try it
Click to expand...
Click to collapse
try to follow the RIL accosrding to the recommendations....nevertheless, if your issue is not rectified...change to another RIL....BB-RIL combo depends on operator, signal and several other factors...so try....
SREEPRAJAY said:
try to follow the RIL accosrding to the recommendations....nevertheless, if your issue is not rectified...change to another RIL....BB-RIL combo depends on operator, signal and several other factors...so try....
Click to expand...
Click to collapse
On first run the app told me the RIL matched, but the recommended one was different. TRied that one and there was no signal at all.
Restored the original and now it's bat to work but with same issues.
Is it safe to try several RILs??
Thank you
JapanLover
There's no danger in trying multiple RILs
Did you flash a new Baseband while changing to the Custom ROM you mentioned?
Are you sure you flashed the BB correctly?
The same problem i have me to. After trying all the rooms i stopped on the latest CM7.1 for Lg optimus 2x. you should try to look you signal to your network manually. In this way i don´t lose anymore the signal. The Gps en this rom it connect very well and i don´t have any problem with the signal. Good LUCK
i got this problem before, but after refresh BB, problem solve...good luck !! and make sure RIL is matched
Gueste 3.0 and bb218 with matching ril I have no issues. Maybe quite heavy on the battery with 3G but its always been like that for me.
http://forum.xda-developers.com/showthread.php?t=1410196
known
arki82 said:
http://forum.xda-developers.com/showthread.php?t=1410196
known
Click to expand...
Click to collapse
Thank you.
I already checked that thread but there is no REAL solution there. Disabling automatic time, hard reset and things like that did not solve any of my issues.
mike-o2 said:
Did you flash a new Baseband while changing to the Custom ROM you mentioned?
Are you sure you flashed the BB correctly?
Click to expand...
Click to collapse
Hi mike,
no I didn't. The baseband I have (the one mentioned in my first post) is the one the phone came with.
Do you think I should try another one? Which one do you think is best with the stock v20o (leaked)?
Thank you

Wifi not working on EnergyROM 3.5

Hi everybody,
Sorry I would post a reply in the actual thread here but they said I need at least 10 posts to post there, and I'm not an active poster though I do use the forums a lot to clear up my doubts. I've tried searching for this problem elsewhere but there is only so much I can gather from browsing forums.. Any help is appreciated!
I just installed the newest version of EnergyROM (4th July) and my Wifi in my power settings shows "Error". I used the 21st Feb version of EnergyROM previously before flashing "Nik_IncredibleS_TriNiTy_SensationXL V 5.0 Final". Wifi was working without any issues on both but when I installed the new one it showed an Error..
I found a solution but it was for the Amaze 4G and I couldn't find an equivalent solution, so I'd appreciate if someone can help me as I have a limited data plan and use wifi at my workplace and when I'm home.
Thank you
heyitsmik said:
Hi everybody,
Sorry I would post a reply in the actual thread here but they said I need at least 10 posts to post there, and I'm not an active poster though I do use the forums a lot to clear up my doubts. I've tried searching for this problem elsewhere but there is only so much I can gather from browsing forums.. Any help is appreciated!
I just installed the newest version of EnergyROM (4th July) and my Wifi in my power settings shows "Error". I used the 21st Feb version of EnergyROM previously before flashing "Nik_IncredibleS_TriNiTy_SensationXL V 5.0 Final". Wifi was working without any issues on both but when I installed the new one it showed an Error..
I found a solution but it was for the Amaze 4G and I couldn't find an equivalent solution, so I'd appreciate if someone can help me as I have a limited data plan and use wifi at my workplace and when I'm home.
Thank you
Click to expand...
Click to collapse
I tried installing a new kernel, 2.6.35.14-UNITY-V10-gf17016b.zip but apparently it's the same version yet it was supposed to fix the wifi problem.. Any help please?
am guessing you've flashed the wrong kernel and/or not done it correctly.
do a clean wipe, install energy rom, download the kernel as suggested in the energy rom thread & flash it..
should work..
i don't think this is necessary but you can also try an app called wi-fi fix (or wifix or something like that)
thanks!
letmedanz said:
am guessing you've flashed the wrong kernel and/or not done it correctly.
do a clean wipe, install energy rom, download the kernel as suggested in the energy rom thread & flash it..
should work..
i don't think this is necessary but you can also try an app called wi-fi fix (or wifix or something like that)
Click to expand...
Click to collapse
Thanks for your reply!
I've actually tried flashing the ROM again but it didn't work; and for my kernel that I flashed, I found that I was actually flashing the same kernel that came together with the ROM..
I've tried several Wifi Fix apps but none has worked.. Attached is a screenshot of the Error.

Wifi issues plz help

more than once i try to connect to a wifi network keep telling me obtaining ip address and disconnect too much
also wifi signal to a specific network low ,although another phone to my friends to the same network but singal is high what is the issue plz and how i can fix it ?>?????
love_story99000 said:
more than once i try to connect to a wifi network keep telling me obtaining ip address and disconnect too much
also wifi signal to a specific network low ,although another phone to my friends to the same network but singal is high what is the issue plz and how i can fix it ?>?????
Click to expand...
Click to collapse
dont forget to factory reset and wipe dalvik cache dude! from cwm
and u can read this thread
http://forum.xda-developers.com/showthread.php?t=1605047
and use search button next time!
cheers!
thanks but i' not using CM7 i'm on ics rom with cm9 ???? and this issues happens and i use the search button i read so many posts but i don't find the good one
http://forum.xda-developers.com/showthread.php?t=
May be this works 4 u
If I helped you please press thanx
sonurockspunk said:
http://forum.xda-developers.com/showthread.php?t=
May be this works 4 u
If I helped you please press thanx
Click to expand...
Click to collapse
thanks but the link is invalid
http://www.youtube.com/watch?v=OwIITfs2ohc
Driver fix of wifi & audio for cm9
If I helped you please press thanx

Categories

Resources