Ok, I've seen I've been in the wrong Forum, so I try it in here again.
Sorry!
Schleicher said:
Sorry for this new Thread, but I´m not allowed to post it there:
http://forum.xda-developers.com/showthread.php?t=788108&page=313
I'm looking for a CF-Root-Kernel for the GT-P1000 with P1000XWJQ8 but I found nothing with the search.
Sorry for mistakes, my English is not very improved.
Is there a possibility to get this CF-Root-Kernel?
I don't understand the rooting-instructions in the Thread.....
Click to expand...
Click to collapse
You're still in the wrong place. This is the I9100 forums, nothing to do with the P1000.
Sorry, i don't understand what you mean.
This Thread is in:
HomeArrow
Samsung Galaxy TabArrow
Galaxy Tab Q&A
Isn't it the P1000?
The I9100 is the Galaxy S II, isn't it?
Anyway, can nobody help me?
You are now in P1000 forum and your search for CF-root will end in this thread
http://forum.xda-developers.com/showthread.php?t=885734
Related
Hello, just got my phone from repair, but not i cannot install Froyo ? is says JM1 is the neweste version? i have change the code with regedit but no... any ideas?
Anyone? Please help me
You are being ignored because at least three obvious reasons...
okay... well i know why samsung removed the froyo from kies
here go to this thread and read for the information on updating your phones firmware should you have missed it on the main page for SGS Dev's.
http://forum.xda-developers.com/showthread.php?t=723596
Radeons said:
okay... well i know why samsung removed the froyo from kies
Click to expand...
Click to collapse
Posting in the wrong forum does not help you get an answer.. this is DEVELOPMENT!!
JM1 is the stock Eclair firmware.
Moved to Q&A as not development.
@OP, there's no need to bump your thread. If you don't get an answer, consider if you posted in the wrong place or did something wrong. Did you read all the stickies and wiki pages etc?
As I own a Galaxy Tab with Android 2.2 I would like to change to Android 2.3.3
The Basband version in use is: P1000DXJJ2
Kernel version: 2.6.32.9 root(at)SE-S604 #1
Build number: FROYO.DXJK2
Now my question is: could I just manual upgrade to version 2.3.3 which I had downloaded, in total 4 files:
P1000XXJQ1_P1000XXJQ1_P1q000XXJPZ.zip
dbdata.zip
gt-p1000_mr_PIT.zip
ODIN3 v1.83.exe
Could someone please tell me it's ok to use that files or, if not, point me in the right direction.
Thank you so much for any answer.
This rom is for european galaxy tab, but I think you can flash it on an asian version of the tab. Look at the development section for this rom.
Sent from my GT-P1000 using XDA App
pcinfo1 said:
Now my question is: could I just manual upgrade to version 2.3.3 which I had downloaded, in total 4 files:
P1000XXJQ1_P1000XXJQ1_P1q000XXJPZ.zip
dbdata.zip
gt-p1000_mr_PIT.zip
Click to expand...
Click to collapse
Can I ask two questions...
(a) Where did you get the download from and (b) have you installed the ROM and how did it go?
Aspi914 said:
Can I ask two questions...
(a) Where did you get the download from and (b) have you installed the ROM and how did it go?
Click to expand...
Click to collapse
To your question:
a: androidtotal. com/manually-install-update-samsung-galaxy-tab-to-android-2.3.3-gingerbread/
b: I asked my question in the OP before I try to install!
I do NOT like to brick my Tab with an unsupported Rom! That's why I ask upfront the Rom could be used on my Asian Tab or not.
aibo said:
This rom is for european galaxy tab, but I think you can flash it on an asian version of the tab. Look at the development section for this rom.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Thanks for your reply.
Unfortunate, I couldn't post in the Dev section right now because of my post count.
As my Tab is an unlocked Tab with Quadband and 3G (900/1900/2100 MHz) I hope that everything will works with the Europe version, I just want to be sure not to brick the device!
pcinfo1 said:
Thanks for your reply.
Unfortunate, I couldn't post in the Dev section right now because of my post count.
Click to expand...
Click to collapse
You shouldn't have been posting in the dev section anyway, that is for posting of dev projects/reference.
TheATHEiST said:
You shouldn't have been posting in the dev section anyway, that is for posting of dev projects/reference.
Click to expand...
Click to collapse
And ask questions about development too, me think! Or am I wrong?
And that's what I doing: Asking Questions!
here: http://forum.xda-developers.com/showthread.php?t=1073854
the tutorial and video from here help me. am on asian galaxy tab. running with no glitches on GB.
http://www.thegalaxytabforum.com/in...gingerbread-p1000xxjq1-p1000xxjq1-p1000xxjpz/
Yes you can. Infact im from philippines. And my tab is korea. I already upgrade my tab using the one that you downloaded. It was a successful upgrade.
Sent from my Galaxy Tab Garlicbread 2.3.3 using XDA App
pcinfo1 said:
And ask questions about development too, me think! Or am I wrong?
And that's what I doing: Asking Questions!
Click to expand...
Click to collapse
No, you are wrong. We have a Q&A forum, try using some common sense. Do you honestly think that its sane to allow questions or other type of topics to be created in the dev section? It would just lead to a complete un-organized mess and browsing the dev section would be a pain in the arse.
http://forum.xda-developers.com/showthread.php?t=1047516
TheATHEiST said:
No, you are wrong. We have a Q&A forum, try using some common sense. Do you honestly think that its sane to allow questions or other type of topics to be created in the dev section? It would just lead to a complete un-organized mess and browsing the dev section would be a pain in the arse.
http://forum.xda-developers.com/showthread.php?t=1047516
Click to expand...
Click to collapse
First at all: The Q&A forum haven't gave an answer within a week or more! Do you really think that's OK?
Secondly: My question were for the Gingerbread Version (Overcome Beta) which is running in the Dev forum and therefore I really do believe that those forum were the right place for to ask questions about that specific version.
After NOT getting an answer in the Q&A forum, I done more researches and found the Samsung Stock Rom (NOT on this forum) and was asking my final question in the Samsung Galaxy Tab General forum.
My remark about the min. post count for to be able to post in the dev forum were just that: A REMARK.
Last but not least, this is a public forum and as long as I stay to the rules, I could post as I like and as it is allowed! There only the forum staff, means Admin's and Moderators who have the right to limit a action or posting ability of an 'normal' user and those will be done in case of an breach of the rules only.
I'm Administrator on one Board and Global Moderator on an other Board and believe me or not, I know what I'm talking about.
If you think that my post('s) are inappropriate, please feel free to report my post to the forum staff.
Have a nice day.
ryn888 said:
Yes you can. Infact im from philippines. And my tab is korea. I already upgrade my tab using the one that you downloaded. It was a successful upgrade.
Sent from my Galaxy Tab Garlicbread 2.3.3 using XDA App
Click to expand...
Click to collapse
And YES, it works!
I updated the last night from 2.2 t0 2.3.3 and everything is fine now. It's quite a bit of improvement compare to Froyo.
Thanks for the info.
Hey pcinfo1, I'm searching around the forum, we are on the same stock ROM.
I like to know if its ok for me to flash to Overcome ROM v3.1.0-KRATOS???
Thanks!
Ok to flash overcome rom ONLY if you update to stock gingerbread 1st. You need the gb bootloaders installed otherwise you will end up with your tab hanging on the samsung logo. Thankfully overcome has the safe stock gb rom v5 that has the gingerbread bootloaders. All you need to do is find the modem.bin file for your region/carrier and you're set.
Sent from my GT-P1000 using XDA App
Hii, thanks for the reply mate. how do i find modem.bin file for my region/carrier?
I'm from Singapore and it should be considered as Asian set right? Thanks!
pcinfo1 said:
First at all: The Q&A forum haven't gave an answer within a week or more! Do you really think that's OK?
Secondly: My question were for the Gingerbread Version (Overcome Beta) which is running in the Dev forum and therefore I really do believe that those forum were the right place for to ask questions about that specific version.
After NOT getting an answer in the Q&A forum, I done more researches and found the Samsung Stock Rom (NOT on this forum) and was asking my final question in the Samsung Galaxy Tab General forum.
Click to expand...
Click to collapse
The reason there are no answers given sometimes is because the questions are so weak, or have been asked and answered soo many times.
If you post a question that doesn't get answered within a day (not within 30 minutes like some people expect), rethink your question.
Posts that have "Hi guys, I'm new" or "Help, I've bricked my tab" for titles tend to get passed over.
HI , I just brought a Samsung 7in p1010 (wifi) and its still on 2.1 - are there any updates or custom rom - i have searched everywhere and cant find anything,.
Thanks
Shabz
wrong section
shabz1309 said:
HI , I just brought a Samsung 7in p1010 (wifi) and its still on 2.1 - are there any updates or custom rom - i have searched everywhere and cant find anything,.
Thanks
Shabz
Click to expand...
Click to collapse
1) This is a forum for devs/chefs to post work, not for n00bs to post crap in wrong place. Please read forum titles before posting things.
2) This is the P1000 section of XDA. You have a castrated cheaper model
Kool shall re start a the post somewhere else....
This is a site for people who want or give help to everyone mr dev or chef or what you wanna be,if you look more,you.ll see up ,in the bar ,this is a forum for galaxy tab development,this includes also a castrated cheaper model ,so if you want to help,you have 3 options:
1 MAKE A CUSTOM ROM FOR P1010 AND A LOT OF OWNERS WITH CASTRATED CHEAPER MODEL WILL BE GRATEFULL because is no a single custom rom in entire xda
2 give a link with the forum for p1010 if this is not the right one
3 work and let people ask,you are not a forum moderator
eongab said:
wrong section
Click to expand...
Click to collapse
????
The name is : samsung galaxy tab seccion
This includes p1010 too.
Turbomar said:
????
The name is : samsung galaxy tab seccion
This includes p1010 too.
Click to expand...
Click to collapse
it should be in [email protected] SECTION...
http://forum.xda-developers.com/forumdisplay.php?f=1081
and oh the correct spelling is SECTION not seccion.
Closed Thread!
Proceed here!
Hi,
Can somebody pls tell me if i can use the P7300XWKJ5------P7300PHNKJ1-----Netherlands ROM also for the P7310 WIFI??
I googled around and couldn't find anything on this subject.
Reason for my question is that this is the only rom with the same codes except the for the P7300 which is on my tablet P7310
Many thanks
Henk
polarebear said:
Hi,
Can somebody pls tell me if i can use the P7300XWKJ5------P7300PHNKJ1-----Netherlands ROM also for the P7310 WIFI??
I googled around and couldn't find anything on this subject.
Reason for my question is that this is the only rom with the same codes except the for the P7300 which is on my tablet P7310
Many thanks
Henk
Click to expand...
Click to collapse
Go to this thread http://forum.xda-developers.com/showthread.php?t=1582943 find the p7310 from for your region and flash. never flash a rom not made for your device. it would be a good idea to post any questions in the q&a part of the forum or you usually won't get helped or worse flamed.
b3ltazar said:
Go to this thread http://forum.xda-developers.com/showthread.php?t=1582943 find the p7310 from for your region and flash. never flash a from not made for your device. it would be a good idea to post any questions in the q&a part of the forum or you usually won't get helped or worse flamed.
Click to expand...
Click to collapse
Thanks for your help, will remember for the next time to post in q&a section
Cheers Henk
this belongs in the Q&A section
answer on your question what do you realy think NO YOU CAN'T USE A P7300 FIRMWARE ON A P7310 OFCOARSE NOT!
safariking said:
this belongs in the Q&A section
answer on your question what do you realy think NO YOU CAN'T USE A P7300 FIRMWARE ON A P7310 OFCOARSE NOT!
Click to expand...
Click to collapse
NO NEED TO BE RUDE!!!
Sorry for wasting your time and offending you with my question, for which btw i have a good reason, but i won't trouble you anymore with my dumb dumb questions, again sorry.
Humbly apologizing o great senior member
i've been trying to find something that could confirm or deny if the faux123 kernel works on my galaxy s3 i9300 and i cant find anything so i'd be very grateful if someone could help me with this, maybe point me in the right direction with a link or something
JimZiii said:
i've been trying to find something that could confirm or deny if the faux123 kernel works on my galaxy s3 i9300 and i cant find anything so i'd be very grateful if someone could help me with this, maybe point me in the right direction with a link or something
Click to expand...
Click to collapse
Wrong forum. This is the i9305 forum
Go here and post your question:
http://forum.xda-developers.com/galaxy-s3/help
Good luck!
Smedslund said:
Wrong forum. This is the i9305 forum
Go here and post your question:
http://forum.xda-developers.com/galaxy-s3/help
Good luck!
Click to expand...
Click to collapse
damn i missed that, i thought all of it was shared for both models under galaxy s3 i9300, i9305
thnx though