Related
I have put together some steps to take your fresh KA6 2.2 Official update and add Root and ClockworkMod Recovery. It may look hard, but should only take a couple minutes.
This is without ODIN or ROMS.
Steps:
0. Have yourself a T-Mobile Vibrant and PC Running Windows.
1. Use SuperOneClick (latest) to root phone. When you run the application, click the first button on the left and wait for the process to complete. Details will be scrolling in the middle window.(http://forum.xda-developers.com/showthread.php?t=803682)
2. Use a file manager (ROOT EXPLORER) or adb with root access to mount /system/ and remove bloatware (SLACKERRADIO and AMAZONMP3 and such) from /system/app/
2a. TOTAL NOOBS: Get SUPER MANAGER from the market (FREE). Then grant it root by going into SUPER MANAGER and selecting File Manager > [Menu BUTTON] > Setup > Enable ROOT function. Then go up levels, the top button on the file manager which will take you up a directory, until you get to / and scroll to the bottom and select [system]. Then select [app]. Then click [Menu BUTTON] > Switch System to R/W and press R/W. Scroll down and long press the slackerradio.apk to delete. You can do this too amazon market to delete and other useless apps.
3. YOU NEED STEP 2 TO DO THIS STEP! Install Busybox from Market and run Busybox Installer to ensure its properly working and the latest is installed.
4. Run SuperOneClick again to place phone into shell root ADB (Second button from the left). Allow the process to run and then a pop up will say something about rebooting the phone. DO NOT DO THIS, continue on to the next step.
5. While in shell root from the previous step, run (3e) to (2e) modified recovery script. The instructions are simple. Download, unzip, and run the batch file found inside. This is ran from the COMPUTER NOT YOUR PHONE. Use the menu system to complete and then reboot as recommended. (http://forum.xda-developers.com/showthread.php?t=833423).
5a. NOT NOOBS: you can copy over the recovery yourself to /system/bin as mentioned by some commenters. If you do not know what this is, then ignore it.
6. Remove any update.zip files from /sdcard/ and also remove any ClockworkMod directories using your favorite file manager or by mounting to a computer with a wire and activating the drive for My Computer. This is the internal one, not external.
7. Use ROM MANAGER from market to install ClockworkMod Recovery and reboot. This is free to download. When you launch, select the top item to install the recovery and then a menu will pop up to choose the phone you have. Happily select Vibrant. Once that's done, select reboot into recover right below that.
8. Re-install packages and it should reboot. You can navigate the menu using VOL UP AND DOWN and power to select.
9. Re-install packages again and it should boot into Clockwork Recovery. It should change form BLUE TO GREEN
ALL DONE.
That should do it for ya! Let me know if it worked out. Please follow all steps and don't cut corners.
Should you need to get back to ClockworkMod Recovery, you can use "adb reboot recovery" and re-install packages, or reboot into recovery with ROM MANAGER.
Edit Rev.a: added a step (6) Made the instructions more precise and added additional steps to clear up some confusion.(1-22-11)
Edit Rev.b: Added step 2a from request. root explorer is not free so use super, that works too. (1-24-11)
Edit Rev.c: Added more detail to the steps and added supplemental info for replacing the recovery with the modified one. (1-27-11)
Edit Rev.d: Super1Click has updated, so latest? works.
Side note: I do step 4 because from my experience, I had trouble getting the modified 3e script to get root. Figured might as well just give it root to begin with.
Side note: Yes I am aware that there are other methods and different ways. This was the noob way for me to convey it to the masses. I still do appreciate all feedback regardless of what it is. Thanks!
jmcghee1973:
***For kicks you can do your 2.2 KA6 update the download Supercurio's KA6 voodoo kernel and ODIN it and have Root & CWM all in one shot.
***For kicks you can do your 2.2 KA6 update then download Supercurio's KA6 voodoo kernel and ODIN it and have Root & CWM all in one shot.
Not to hijack your thread...
Yea I know, but I wanted to find a way without ODIN.
added ur blurp
Reinstalling packages does not seem to work for me. Every time I click it and it reboots it keeps going into the samsung recovery menu... Help?
Does it give an error for signing or just looks like its working then reboots?
Looks like it works and then reboots
I didn't do this step though, would it affect anything?
2.Use a file manager or adb with root access to mount /system/ and remove bloatware (SLACKER and AMAZONMP3) from /system/app/
Double check if there is a update.zip and clockworkmod folder with a zip in it on your internal memory. I think the external card changed directories with the 2.2 update.
EDIT: infact, remove any update.zip and clockwork folder from the internal memory and run ROM MANAGER again and fresh download the clockwork 2.5.1.2. then check and confirm its on the internal. should be /sdcard/
once its confirmed there, then try again to reboot into recovery with rom manager
Nothingness00 said:
Double check if there is a update.zip and clockworkmod folder with a zip in it on your internal memory. I think the external card stopped working with the 2.2 update.
EDIT: infact, remove any update.zip and clockwork folder from the internal memory and run ROM MANAGER again and fresh download the clockwork 2.5.1.2. then check and confirm its on the internal. should be /sdcard/
once its confirmed there, then try again to reboot into recovery with rom manager
Click to expand...
Click to collapse
Tried that, still can't get into clockwork recovery...
I didn't do this step though, would it affect anything?
2.Use a file manager or adb with root access to mount /system/ and remove bloatware (SLACKER and AMAZONMP3) from /system/app/
I would highly suggest doing that step. The system is full to begin with. Use Root Explorer and grant access, then mount system into r/w and remove the stupid stuff. You should do this to get Busybox on (AS IN BEFORE YOU INSTALL BUSYBOX)
What does busybox do?
jmoreau10 said:
What does busybox do?
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/BusyBox
ITS ESSENTIAL
Got it working man, thanks.
Awesome! Good to hear. This is my first tutorial and I'm stoked that its working well for others.
I've been an XDA visitor since my AT&T Titan WM6 days. I've done alot of flashing and modding since then and have always been able to find solutions without asking until now. This clockwork recovery issue is kicking my butt.
I am having trouble with steps 4 & 5.
what are the specific buttons to press on superoneclick in step 4?
How exactly do I use the file 3(e)_recovery_installer?
Thanks for any help.
dsilver981 said:
I've been an XDA visitor since my AT&T Titan WM6 days. I've done alot of flashing and modding since then and have always been able to find solutions without asking until now. This clockwork recovery issue is kicking my butt.
I am having trouble with steps 4 & 5.
what are the specific buttons to press on superoneclick in step 4?
How exactly do I use the file 3(e)_recovery_installer?
Thanks for any help.
Click to expand...
Click to collapse
4. Run SuperOneClick again to place phone into root shell ADB
For this step, run SuperOneClick from before, the same you used to root. The second button says "Shell Root". Click that Wait for it to say you have shell root until you reset.
5. Run (3e) to (2e) modified recovery script (http://forum.xda-developers.com/showthread.php?t=833423)
Just download the attachment in the first post and follow instructions. Its fairly simple process. Keep in mind, this may not work unless your phone is shell root from step 4
Thank you Nothingness. Cleared it right up. Worked perfectly.
dsilver981 said:
Thank you Nothingness. Cleared it right up. Worked perfectly.
Click to expand...
Click to collapse
Awesome! Great to hear it! Love them thanks
im a total noob, but im about to try this, wish me luck haha
thoetherguy said:
im a total noob, but im about to try this, wish me luck haha
Click to expand...
Click to collapse
Luck? ****'s easy as pi. Well... Er... Just follow the steps to a tee.
Nothingness00 said:
Luck? ****'s easy as pi. Well... Er... Just follow the steps to a tee.
Click to expand...
Click to collapse
haha, yeah it was easy , thanks...
Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
A few questions:
spazlon said:
I tried installing a custom ROM on my 7310 and it had issues.
Click to expand...
Click to collapse
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop.
Click to expand...
Click to collapse
How far into the boot sequence does it get?
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Have you tried seeing what is causing the boot-loop using adb?
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Click to expand...
Click to collapse
This is an action of last resort. Exhaust all other avenues first.
boscorama said:
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
Click to expand...
Click to collapse
I used CWM to flash AOSP 4.1.2. It seemed to work fine for a day or two, but then it needed charging (as normal). I let it charge over night and in the morning it had less battery. I figured the charger or cable were flaky so I tried another set on another outlet and same thing. Then it finally ran out of battery. I let it charge again over night and when I tried to turn it on it was really slow. The boot animation was only 1 frame every couple seconds. It would eventually boot all the way up, but it was still REALLY slow. So I went into CWM and reflashed the same ROM. Then I got a boot loop of the boot animation. I couldn't get into CWM any more, so then I went into download mode and flashed the official firmware and flashed it with ODIN.
boscorama said:
How far into the boot sequence does it get?
Click to expand...
Click to collapse
Now when I turn it on it just says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can flash again with ODIN and it will get to the Samsung boot animation and just pulse SAMSUNG.
boscorama said:
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Click to expand...
Click to collapse
If I hold power and volume down I can get into download mode or Samsung recovery, not CWM, and power with volume up doesn't do anything.
boscorama said:
Have you tried seeing what is causing the boot-loop using adb?
Click to expand...
Click to collapse
I don't know anything about adb and I'm not sure what I would be looking for. Is there a tutorial I can follow somewhere?
Thanks for any help!
This worked for me with similar problem
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Thanks! I'll give this a try when I get home. I'll let you know how it works out.
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Agreed - my procedure avoids manual repartitioning - I tried lots of other procedures but none worked. I think my data partition had become corrupt because I kept getting error messages. My first try was to recover with my cwm recovery file I made originally but I kept getting back to the boot loop .
spazlon said:
Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
Click to expand...
Click to collapse
I always got something like that ...
After bootloop just go to recrovery mode then factory riset ... its 100% WORK
Sent from my GT-P7300 using xda premium
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
Sorry - being a newbie myself I'm at a loss. It worked a charm for me.
spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
did a format /system before installing the custom roms? This is an important step.
prince93 said:
did a format /system before installing the custom roms? This is an important step.
Click to expand...
Click to collapse
This fixed it. Never had to do it with any of my other devices. CM10 loaded quickly after that. Loving how fast JB is!
Thanks!
Sent from my GT-P7310 using Tapatalk HD
It worked
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
WOw! This fixed my Tablet! thank you ever so much!!
mjramos15 said:
WOw! This fixed my Tablet! thank you ever so much!!
Click to expand...
Click to collapse
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
Gee thanks. This saved my tab. I'd almost given up on it and then voila.
See several posts below for the steps that worked for me
I'm posting this here because my post in the Q&A forums has received zero replies.
I feel like I've tried everything. I installed the UVMA1 over-the-air update and have lost and am unable to regain root. I seriously need a solution to this.
Has anyone been able to root the most updated SGH-T879 with the UVMA1 build?
Re: [Q] Rooting the OTA updated UVMA1 build
You have to do following steps
1.download CWM recovery. tar
2.download odin flashable CWM touch recovery.tar
3.go to download mode
4.flash the UVAM1.tar file through odin
5.flash the CWM recovery.tar through odin
6.flash the CWM touch recovery.tar through odin
7.go to recovery mode flash the super user
8.reboot
You should be okay...
I hope that it helping you to Root the phone.
Let me know if you did.
Good luck..
Sent from my SGH-T879 using xda premium
Flash the CWM recovery tar through Odin.
https://www.onlinefilefolder.com/3sYujqhSWDjt5I
After CWM has been installed, flash superusers through recovery.
https://www.onlinefilefolder.com/3sRc8Cz8TcpOLC
To change recovery to TWRP (which most people seem to prefer now days) flash TWRP zip through CWM recovery. I like this method better than trying to install TWRP through Goomanager, I always have trouble with that for some reason.
Paste below address into your browser
goo.im/devs/OpenRecovery/sgh-t879/openrecovery-twrp-2.3.1.1-sgh-879.zip
Now your phone is rooted and you have TWRP.
Re: [Q] Rooting the OTA updated UVMA1 build
I did as same as it.
But. I couldn't go to recovery
That is why important that make it sure flashing CWM touch recovery.tar through odin.
Maybe just my phone?.
Thank you.
Sent from my SGH-T879 using xda premium
I got my phone to root, but have been unable to change the recovery so I can switch to 4.2.2.
I will clean this up as time permits.
Success!
Through trial and error, on Ubuntu and Windows, I have managed to successfully root the UVMA1 build. I did not screenshot the process so I'll be going from memory. On the other hand I will post a stock backup of the ROM for everyone to use as needed.
This did not work on Ubuntu, had to use Windows.
You will need:
Android Tools SDK
CWM
most recent ODIN
Superuser zip
Steps:
download Android Tools SDK.
Extract to your C: on your windows machine
Open command prompt and navigate to the Platform-Tools directory
enable debugging mode on your Note (Settings > Developer Options > USB Debugging
Leaving your phone on, connect via USB to your computer
wait while the Samsung drivers load
On command prompt type "adb reboot-bootloader" or "adb reboot bootloader" and wait (might need to try both)
Your phone should reboot into downloader mode
Open the newest version of ODIN
In Odin, nothing significant will change, I only saw a blue box in the first square top left
Click on 'Bootloader' button and select the tar.md5 file from Tomin's Goodies thread (link to come later)
In Odin, click on Start
Odin will scroll some text in the little window (bottom left) and then stop. I waited about five minutes. Nothing changed.
Disconnect your phone, pull the battery, press the power button (to dissipate magic electrons), put the battery back in and turn the phone on
Your phone should show a screen saying there is an issue with the Firmware and to use Samsung Kies to fix it. IGNORE THIS, don't do anything
Reconnect phone to PC via USB
wait about 30 seconds for the computer
In Odin, press Start again.
Odin should do something differently than the first time, you should see the top left window go green and 'Reset Ok' in the bottom left window.
Your phone will reboot. If it loads to Android then go to the command prompt window on your PC and type 'adb reboot recovery'
wait about a minute. CWM should load on your phone.
Now is the time to install Superuser zip through CWM.
Additionally, clear dalvik and other caches, reset permissions and backup your rom to external SD card now.
If anyone tries this, please document the process with screenshots so we can create a more comprehensive tutorial.
Here is everything you need for a flawless upgrade from a 4.2.2 to 4.4.2 on the i537 hardware.
Step 0: Download this zip file. It has everything that we will need (except Odin3. Don't want my link/thread/post pulled).
Step 1 - Update from to 4.3.
Download and unzip the Stock ML2 4.3 image. Reboot your phone into Download Mode (Hold Volume Down while booting up, then press Volume Up when prompted). Don’t worry about current root, SafeStrap, etc - as it’s all going away soon.
Step 2 - Match up the file names to the four ‘Files’ sections in the lower right corner of Odin3. The individual filenames of the .tar.md5 files will be used as an identifier. Check “update bootloader” and click ‘Start’. Once it finishes and reboots into 4.3, enable USB debugging mode on the phone.
Step 2- Reboot into Download Mode. Apply Pwnedkernel 4.3 with Odin using the PDA File section.
Step3 - Now let the phone boot up. You will need USB Debugging enabled again, and ensure that you have USB ADB access.
Step 4 - Once ready, run Saferoot to the running pwned 4.3 image (install.bat for Windows, install.sh for Linux/Mac OS). Follow the terminal instructions until completion.
Reboot. Launch SuperSU and update the binary. Disable Knox with your new root access. Ignore any issues with Modems, etc.
Step 5 - Flash original 4.3 kernel back with Odin3 using the PDA File section.
Step 6 - Place your SafeStrap apk, PwnedKitKat, and SuperSU to your SD Card.
Step 7 - Install SafeStrap (make sure to launch it for the bootloader to install correctly)
Step 8 - Reboot into SafeStrap recovery. Flash PwnedKitKat.zip, followed by SuperSU.zip. Do not reboot in between, clear cache, or any other nonsense.
Step 9 - When finished, reboot back into DOWNLOAD MODE. Now flash the stock KitKat kernel using Odin3 (using the PDA File section).
Finished!
Shout-out to: Hashcode, My-blue-snog-box, TransformixS4, & Sunderwear. Y’all have kept me sane dealing with this phone and it’s locked bootloader.
casadelbeard said:
Finished!
Shout-out to: Hashcode, My-blue-snog-box, TransformixS4, & Sunderwear. Y’all have kept me sane dealing with this phone and it’s locked bootloader.
Click to expand...
Click to collapse
Great guide!
I'm glad I helped and thanks for the shout out!
I hope I will help you in more things!
-TransformixS4
Do I have to do a factory reset? Or simply clear cache/dalvik?
casadelbeard said:
Step 1 - Update from to 4.3.
Click to expand...
Click to collapse
I hate to be a nit picker, but shouldn't this say "from 4.2 to 4.3"?
Thanks for a great post and the zip file! Makes it nice n easy for us. Can't wait to flash later!
?
Tell me how do you download your zip because after an hour of "downloading to my pc" I yet have to see any file in any of my download folders.
2nd of all I made the mega account, tried downloading through the account to my pc, then through the cloud, then through the sync & still am unable to physically see any download happening onto my pc hdd... Although I respect the owner, Kim Dotcom there is something wrong since you can't simply even download a file like it is normally available, (a standard) through your browser..
Please explain to me how do you get the 1.67gb file onto the pc because I tried everything I could think of and I am unable to & I am not a noob.
This is the first time i stumbled upon something weird like this..
when i update to Kitkat on safestrap it says "Checking MD5 File... Skipping MD5 Check: no MD5 File found." Should i be worried?
casadelbeard said:
Here is everything you need for a flawless upgrade from a 4.2.2 to 4.4.2 on the i537 hardware.
Step 0: Download this zip file. It has everything that we will need (except Odin3. Don't want my link/thread/post pulled).
Step 1 - Update from to 4.3.
Download and unzip the Stock ML2 4.3 image. Reboot your phone into Download Mode (Hold Volume Down while booting up, then press Volume Up when prompted). Don’t worry about current root, SafeStrap, etc - as it’s all going away soon.
Step 2 - Match up the file names to the four ‘Files’ sections in the lower right corner of Odin3. The individual filenames of the .tar.md5 files will be used as an identifier. Check “update bootloader” and click ‘Start’. Once it finishes and reboots into 4.3, enable USB debugging mode on the phone.
Step 2- Reboot into Download Mode. Apply Pwnedkernel 4.3 with Odin using the PDA File section.
Step3 - Now let the phone boot up. You will need USB Debugging enabled again, and ensure that you have USB ADB access.
Step 4 - Once ready, run Saferoot to the running pwned 4.3 image (install.bat for Windows, install.sh for Linux/Mac OS). Follow the terminal instructions until completion.
Reboot. Launch SuperSU and update the binary. Disable Knox with your new root access. Ignore any issues with Modems, etc.
Step 5 - Flash original 4.3 kernel back with Odin3 using the PDA File section.
Step 6 - Place your SafeStrap apk, PwnedKitKat, and SuperSU to your SD Card.
Step 7 - Install SafeStrap (make sure to launch it for the bootloader to install correctly)
Step 8 - Reboot into SafeStrap recovery. Flash PwnedKitKat.zip, followed by SuperSU.zip. Do not reboot in between, clear cache, or any other nonsense.
Step 9 - When finished, reboot back into DOWNLOAD MODE. Now flash the stock KitKat kernel using Odin3 (using the PDA File section).
Finished!
Shout-out to: Hashcode, My-blue-snog-box, TransformixS4, & Sunderwear. Y’all have kept me sane dealing with this phone and it’s locked bootloader.
Click to expand...
Click to collapse
I do not understand which 4 files to put where
Match up the file names to the four ‘Files’ ... How do you MATCH them up. I only see one file to match up called CSC
What does the AP CL and CP and how do those match up to Bootloader PDA and PHONE ??
Display issues
As soon as I installed 442 kernel display issues popped up. The screen is brighter on the left than on the right with vertical lines running throughout.
Started whole process again... issues go away until 442 kernel is reapplied.
Any suggestions?
I was able to get Eclipse TW 4.02 SS ROM to boot and it looks very nice so far.. as close to AOSP as we will get. I started with the usual 4.3 > TR> SS 3.71 > NC9 Update >KK Kernel > SS3.73 upgrade path, then downloaded the newest eclipse 4.02 SS ROM and 4.4.2 i537 modules. I went ahead and inserted the modules into the eclipse ROM just to save an additional flash step, then flashed the new rom, wiped data,dalvik and cache then rebooted to download and flashed the KK i537 kernel on top. After a few minutes I'm at the setup screen.
So far the only issue I'm battling is the default camera FC, the Google camera app doesn't seem to work either
downloading issues?
baldusiek said:
Tell me how do you download your zip because after an hour of "downloading to my pc" I yet have to see any file in any of my download folders.
2nd of all I made the mega account, tried downloading through the account to my pc, then through the cloud, then through the sync & still am unable to physically see any download happening onto my pc hdd... Although I respect the owner, Kim Dotcom there is something wrong since you can't simply even download a file like it is normally available, (a standard) through your browser..
Please explain to me how do you get the 1.67gb file onto the pc because I tried everything I could think of and I am unable to & I am not a noob.
This is the first time i stumbled upon something weird like this..
Click to expand...
Click to collapse
I have downloaded the file 3 times now (accidentally deleted it the first, then ineeded it on a laptop at a friends house. Downloaded flawlessly. Im FAARRR from a noob, but honestly, a 10 year old could do it. I did my sons active and mine. Try using a differrnt browser or something. Only took about 20 minutes total to download the whole file. I used IE every time. I dont know if thays the dame browser you used but if not, then try that. (I know this post is a little older, but for someone like me who just picked up a couple actives this week it came in mighty handy. Thanks for the tutorial. Does anyone know of any 4.4.2 touchwiz based rome that I can use now that I have safestrap (3.73) running? Or is this basically all we are going to get. Im ok with that but woild love a deodexed TW rom to use. Have trued deodexing mine several times now and while it says thay it worked and is complete, its still odexed after reboot from recovery??!?!
Hello!
This thread is to teach you how to flash TWRP, along with a custom ROM on your T-Mobile Galaxy S5 WITHOUT root!
DISCLAIMER:
Read the whole thread at least one before trying!
Anything you do to your device is your own decision. I am not forcing you to do this. If you screw something up during the process, that isn't my fault.
Custom ROMs can sometimes be unstable. PLEASE make sure you are downloading the correct file for your device model.
Tampering with your device's firmware, including custom recoveries, ROMs, or rooting your device WILL VOID THE WARRANTY.
Flashing a custom ROM WILL DELETE YOUR DATA. Consider backing up your apps, photos, videos, files, etc. online or to an external storage.
Before we start, we need to download a few things.
*Do not download anything with Safari! Safari unzips zip files, but we want them to stay zipped. DO NOT RE-ZIP THE FILE YOURSELF!!! It will not be zipped in the correct format!*
1. Odin v3.12.3: (Odin)
2. The TWRP recovery tar file: (TWRP)
3. Your custom ROM zip file. (There are many ROMs out there, but Lineage is a pretty good one: (Lineage OS klte) Choose the most recent release.) IMPORTANT: Make sure you download this to your phone's internal/external storage to an easily accessible location.
4. A GApps package. This is required if you want to be able to download apps from the Google Play Store. Go to the Open GApps page and choose ARM, and Android 7.1. You shouldn't need anything more that micro. IMPORTANT: This file also goes onto your phone's internal/external storage.
5. Your device drivers. Most of the time, Windows will automatically install the required drivers once you put in the device, but in the case this doesn't happen, try googling your devices model number and "windows drivers." Follow the process to install.
Alright, with that out of the way, let's install TWRP.
1. With your phone unplugged, boot into "Download mode." Power off your device. Then hold down the Power, Home, and Vol- buttons until you see a warning pop up.
2. Accept the warning by clicking Vol+.
3. Run the Odin exe file we downloaded earlier. (You may have to unzip the file first.)
4. Go to Options and disable auto reboot. Go back to the Log tab.
5. Plug your device into the computer. You should see Odin say "ADDED!" on the side.
6. Click "AP" and locate the TWRP recovery tar file we downloaded earlier.
7. Once you select the file, click "Start."
8. When finished, it should say "PASS" at the top. This is where you unplug your phone and remove the battery.
9. Wait 10 seconds before putting the battery back in.
10. Try booting into recovery by holding down the Power, Home, and Vol+ buttons. If it reads "Team Win Recovery Project" at the top, then congrats! You've successfully flashed TWRP! If it says at the top "stock recovery," try the whole process again from step #1.
Now we can flash your custom ROM!
1. This is where we wipe your phone's data. Click on "Wipe." Then Swipe to factory reset.
2. After you have wiped your device, click on "Install"
3. Now navigate to the ROM zip file and select it.
4. Click on "Add more zips"
5. Navigate to the GApps zip file and select it.
6. Swipe to install. This can take some time, so grab a cup of coffee and maybe check out my Youtube channel?
7. The moment of truth: click on Reboot, then System. The first boot can take a minute. If it doesn't show up after 5 minutes, remove the battery and try wiping and flashing again.
CONGRATULATIONS!! You've installed a custom ROM! Enjoy! :laugh:
EXTRA:
If you want to enable root on your Lineage OS device, you must flash an additional file first.
1. Go to this link and download the first su (arm) file and save it to an easily accessible location.
2. Boot into recovery mode once again by powering off your device, then pressing and holding Power, Home, and Vol+ until TWRP appears.
3. Click on install.
4. Select the su zip file we downloaded earlier.
5. Swipe to install.
6. Once it is installed, boot back into system.
7. Navigate to developer options in settings.
8. Scroll down to"Root Access" and change it to either Apps, or Apps and ADB.
Awesome, now you have root!
Thanks for the help:
[url]https://forum.xda-developers.com/tmobile-galaxy-s5/general/root-how-to-root-sm-g900t-firmware-t3358190[/URL]
I did not work for me, when I go recovery mode it shows:
Could not do normal boot
Odin mode.
I'm definitely not an pro at this, so can anyone help me please
Worked perfectly on the latest stock OTA!
Doesn't work for me. When I reboot in recovery ode, instead of TWRP loading I get a generic Android Recovery screen with a few options - reboot system now, reboot to bootloaded, apply update from ADB apply update from SD card, wipe data/factory reset, wipe cache partition, mount /system, view recovery logs, power off. Now sure how to proceed....
bradmccoy said:
Doesn't work for me. When I reboot in recovery ode, instead of TWRP loading I get a generic Android Recovery screen with a few options - reboot system now, reboot to bootloaded, apply update from ADB apply update from SD card, wipe data/factory reset, wipe cache partition, mount /system, view recovery logs, power off. Now sure how to proceed....
Click to expand...
Click to collapse
We’re you sure to unplug and remove the battery? This is essential to ensure the phone powers down. If you just power down the phone will reset the recovery to avoid TWRP. You have to remove any power source to force a shutdown before it can reset. Please feel free to respond and I’ll be happy to help to the best of my abilities!
Thank you so much for this tutorial. It worked perfectly in my SM-G900MD, and it's easier than the method suggested by the Lineage OS page itself. :good:
Thanks, these steps worked just fine on an SM-G900T, and were very easy to follow.
Thank you! This worked beautifully.
Only thing that didn't work the first time is, is that it told me to download the Gapps Android 8.1 file instead of 7.1.
I hear people talking of unlocking the bootloader in order to install a custom ROM. Why haven't you mentioned that in this article?
Had the "FAIL! (Auth)" problem with flashing TWRP with Odin.
It seems that after I have disabled Reactivation Lock (the standard feature that requires activation of the phone with Samsung account) it helped to succeed flashing TWRP.
Hi All,
Thanks for a great and useful guide. Whilst it says this can be achieved without root, which is fantastic... It doesn't mention anything about tripping Knox or not?? I assume this will trip the Knox counter, won't it ?? Or do this method bypass that ??
Thanks, Lister
adult supervision needed for Samsung S5 Lineage 17 install
Hi, I'm good with adb and fastboot, running Linux with the commandline Odin4. I can get the phone to the warning screen about the danger of installing other Roms. How do I proceed? What are the commandline options to use to flash the LineageOS 17 with odin4 ? The Odin4 help file isn't very helpful.
Could not do normal boot
I am not an expert at this and I am having the same issue as The Verg
I have a message at the top "Could not do normal boot" same as him
I've been at this for 2 days now I'm just about at my ends wit
My phone is a Samsung S5 Active model SM-G870W
and I can easily rooted it or reinstall the stock file and put it back to original
and I've done that hump time but this TWRP file I just can't install it
to update this phone to a more recent software and basically install
an S8 or S9 software in it (mind you version 9 Pie would be OK0
and make this old phone a real beast.
I read somewhere about the OEM button which does not exist on this phone
whatever explanation they are giving to unlock it and make the button appear
all of a sudden is bs in my book.
Now please help me with this phone and the other guy by the same token
Is there another way I can get into this phone and wipe it clean and
boot it with thru the abd file or access the sd card or the internal
storage of the phone.
How can I add a picture of my phone to this thread