Database Develop

[Q] Can We Flash Arabic Region CSC on the Italian Gingerbread Stock FW?

This may be a stupid question but please it is legit for me a newbie...
I have flashed to stock italian Gingerbread-no problems so far. I want to replace my region from XEU to XSG which is the Arabic region sales code.

yup this is possible. i did something similar on my tab. flashed stock italian GB posted by chainfire and then replaced all my csc files with those for philippines (XTC, GLB, SMA, XTE).

Kabayan, ok I've read somewhere that you used root explorer to replace the csc folder. Where to get the csc folder that I need is now my problem.....
Would you mind to post a step by step procedure on how to go about replacing the csc sales code?

Can we use csc - arab from froyo to gingerbread?

@bongski55
i used sec_csc.zip from KM3 (froyo) firmware. if you have a copy of your old firmware, it is found in the cache.rfs you could mount it with apps likes ultraiso and then extract sec_csc.zip
@romy4321
you could use csc files from froyo builds.

noxxious said:
yup this is possible. i did something similar on my tab. flashed stock italian GB posted by chainfire and then replaced all my csc files with those for philippines (XTC, GLB, SMA, XTE).
Click to expand...
Click to collapse
sir, where can i get those CSC files? can you lead me to the right thread for this? salamat

dudung_ambot said:
sir, where can i get those CSC files? can you lead me to the right thread for this? salamat
Click to expand...
Click to collapse
get csc_sec.zip here
http://forum.xda-developers.com/showpost.php?p=13931129&postcount=47
clearer instructions by vince_junior
http://forum.xda-developers.com/showpost.php?p=13936982&postcount=6

attached csc folder for arab region
http://www.4shared.com/folder/yHALatWU/_online.html
extract copy this csc to my sd card, delete the existing csc folder on system/ and then move from sd card paste to system/ using root explorer
i used this on my tab with gingerbread europe version
hope it will help

it didn't work with me after deleting the CSC from system then move the arabic CSC , reboot my tab then they system hang , so i had to do full re-install !!!!!!!!!!!!

sec_csc file. flashable via cwm.

its for the overcome gingerbread or for the stock rom ?

k0sh said:
its for the overcome gingerbread or for the stock rom ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14459996&postcount=10
i think it would work for both.

to be clearly , this is will make the tab totally support the arabic language or only for the modem 3g etc ?
EDIT : i just flashed it , and actually no affect at all , talking about if u want to change the locale to arabic or even if you wanna browse in arabic is not supported .. actually the CSC i know is for modem .
ok here is how you do it after u flash the zip . *#272*MIEI# and choosed EGY and press install ( this will wipe all your data ) . then your tab will reboot , but still doesn't support arabic in locale or even in browser .. so what is the use of it ?

just the 3G/Market issues...

noxxious said:
just the 3G/Market issues...
Click to expand...
Click to collapse
i thought it will also affect on the locale , nvw thanks , am feeling good with overcome gingerbread because in their rom they don't include the modem , so 3g will work even if you are in the moon .. tnx

k0sh said:
i thought it will also affect on the locale , nvw thanks , am feeling good with overcome gingerbread because in their rom they don't include the modem , so 3g will work even if you are in the moon .. tnx
Click to expand...
Click to collapse
then i guess it's for those who just flashed stock italian GB.
CSC files contain settings for region/carrier for 3G and not really for modem.

So anyone succeed to get Arabic working ?
Or is there any 2.3.3. Rom supporting Arabic ?
Thanks.

manadus said:
So anyone succeed to get Arabic working ?
Or is there any 2.3.3. Rom supporting Arabic ?
Thanks.
Click to expand...
Click to collapse
There is still no official Arabic gingerbread release by samsung so there is only temporary patch to partially enable Arabic on Overcome Gold. Go to "the overcome experience" website to download the patch.
Samsung is quite busy with the upcoming releases of the 10.1 and 8.9 tabs so it will take a while for the updates. Even the Italian gingerbread had become unofficial now that it has been pulled out.
If I were you you can write a letter to samsung to pressure them to release an arabic gb..

As I don't like to come back to Froyo, I'll try Overcome Gold Rom and try the arabic patch.
Sent from my GT-P1000 using XDA App

for almost two weeks on playing/expirementing on my tab with gb -overcome, i used csc for arabic region, extracted from froyo
Uploaded with ImageShack.us

What does PDA, CSC mean? which firmware to choose

Hi all,
I have just bought me a galaxy note with 2.3.6 firmware,
And i wonder what does the PDA and CSC mean in the firmware upgrade to ICS?
http://forum.xda-developers.com/showthread.php?t=1424997
I don't really understand which firmware to choose...
I want to choose 4.0.4 but dont know which one.
I am currently using :
model number GT-N7000
android version: 2.3.6-mobile-star
baseband version: N7000XXLPT
Kernel: 2.6.35.7-N7000XXLA4CL886827
Build: GINGERBREAD.XXLA6
What is my PDA?
What is my CSC?
What is PAD?
What is CSC?
Which firmware can i choose?
What is the difference between all the firmwares?
Thanks in advance

PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.

I see
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!

backup your efs first http://forum.xda-developers.com/showthread.php?t=1606012
you need root for that you can get that by following dr ketans guide in sticky section developement.
Sent from my GT-N7000 using Tapatalk 2

mailman77 said:
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!
Click to expand...
Click to collapse
you can update to any rom any time, just follow dr ketans thread and follow pc odin route
Updating throught Kies/ota is tricky, you need pcode sometimes of the country rom you want to go to, no root, and csc of that countries rom, and a whole stock rom installed for that csc. Best to just always follow pc odin route lol
also read stickies and threads fully cause a lot messed up by not doing that. One tip on ics do not wipe/factory reset
happy reading and searching
Sent from my GT-N7000 using Tapatalk 2

how to install CWM application for N7000XXLRK
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,

lol csc thats important, 3 letter code by dialing *#06# to get emei,
then dial *#272*emeihere*
Sent from my GT-N7000 using Tapatalk 2

mailman77 said:
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,
Click to expand...
Click to collapse
Find rooting guide from my signature n get cf rot kernel
Ps: cf root kernwl for lrk not available, use lrg instead of that.
Or use custom kernel like speedmod
Sent from my GT-N7000 using xda premium

CWM and battery
I have rooted the N7000XXLRK successfully.
You mean that i can not install CWM application on that firmware?
So how do i backup the whole phone without CWM?
And another question:
i want to see the battery percentage on the upper bar and not only the battery icon indication, how do i do that? is that possible?
Thanks,

best, not to use cwm on a kernel that can trigger the emmc brickbug, best to use kernel like speedmod k3-11 or likewise which has the trigger for emmc brickbug disabled when doing anything in cwm, or in ics.
Dont wipe, factory reset, change csc, or delete large files on a stock ics kernel
to eliminate these issues read threads/first posts of kernel threads btw.
tip: use kernels based on tw, or stock for stock ics, kernels based on cm9 or other are not for stock..
tip2: when nandroid backup, and wanting to recover that, you need same kernel installed as when backup was made. So use a safe kernel
tip3 when recovering apps and data on different roms, issues can arise due to different database structures, which is why its not really supported on i.e. cm9
tip 4 Some roms are wipe some are not. when going to and from gb and ics stuff could linger, which could cause softbricks. There are clean ways to go to and from, enought threads on that's but always do it on safe kernel whatever wipe action
Sent from my GT-N7000 using Tapatalk 2

phone does not support upgrade via kies
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
i am on the latest ICS stock rom (INU), the CSC shows XXX, when i connect the device to kies
i have tried the *#272*IMEI#
and changed it to INU, the device got full wipe once this happened , still i get the same CSC-XXX
and the same - phone does not support upgrade via kies
plz help

Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab

if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
i installed the new firmware INU using the pc odin
note is unrooted no apps are installed
i hav no backup of any of the stock firmware n efs ..
.. ll that - "Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab"
work. i need to try it nw ! !

nokiamodeln91 said:
Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab
Click to expand...
Click to collapse
his didnt work.. pcodin CSC doesn't recognize img files ! ! !

ShreyasRewagad said:
his didnt work.. pcodin CSC doesn't recognize img files ! ! !
Click to expand...
Click to collapse
yeah u r right... my bad.. use mobile odin

nokiamodeln91 said:
yeah u r right... my bad.. use mobile odin
Click to expand...
Click to collapse
this wayzz not workin.. it requires root.. my note is unrooted.. plz temme sum other way..

dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
Click to expand...
Click to collapse
Thanks for the explanation, but what do the letters PDA actually stand for?
(And please don't say "Personal Digital Assistant," because that's all I can find and I've been searching all day.) :fingers-crossed:
I'm sure it must mean something else when it is being used in a discussion of Android mobile phone software.
Does anyone know what "PDA" actually stands for, what are the actual words represented by that abbreviation?
Thanks in advance for your help.

CSC and Google Play App
I've tried a lot of ROMs. Some ROM makes impossible to install applis from Google Play Store. For example when using the Sweet V5 ROM, I cannot get Firefox nor Chrome from the market. It says my Galaxy Note is incompatible. Do you have any idea of CSC management ?

please help me
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
dr. ketan sir, i have some problem to understand PDA and CSC defenition and i also have some problem about unrooting my note 2
my note 2 build number is N7100UBDMA1 and i want to unroot my device.
my question is, i see your answer above that i can use any ROM for any country as long as my device is unlocked ? so can i use indonesia firmware to unroot my device ? because i bought this device at china and now i'm living in indonesia
thank you so much for your attention sir

CSC code problem after updating

I was on Gingerbread 2.3.6 after upgrading via KIES it became 4.0.3
on recovery mode I found CSC code is MID which is related to Iraq
after that I downloaded 4.0.3 (United Arab Emirate) and flashed via PC Odin, I checked CSC code I found it MID not XSG which is related to united arab emirates
I am sure that the process completed successfully in PC odin
what is the problem? why CSC code didn't change from MID to XSG?

Maybe thats stock rom didn't do auto full wipe when flashing..
Change ur CSC using *#272*imei#..
It is will do factory reset..
So backup ur app n data using Titanium backup before..
Sent from my GT-N7000 using Tapatalk 2

warning, it might brick your device changing csc on ics with unsafe kernel as it will delete your data.
Either flash safe kernel throught pc odin and change,
or flash a gb with the prefered csc and change there, then flash ics with prefered csc throught pcodin. How? see dr ketans thread sticky section development.
best case would have been to root and backup efs before doing anything on original gb, how, see dr ketans toolbox thread general section
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
warning, it might brick your device changing csc on ics with unsafe kernel as it will delete your data.
Either flash safe kernel throught pc odin and change,
or flash a gb with the prefered csc and change there, then flash ics with prefered csc throught pcodin. How? see dr ketans thread sticky section development.
best case would have been to root and backup efs before doing anything on original gb, how, see dr ketans toolbox thread general section
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
1- what do you mean with a safe kernel?
2- why flashing ICS directly with prefered CSC XSG (4.0.3) doesn't remove MID (4.0.3)?

mohammed_kira said:
1- what do you mean with a safe kernel?
2- why flashing ICS directly with prefered CSC XSG (4.0.3) doesn't remove MID (4.0.3)?
Click to expand...
Click to collapse
1. Safe kernel is one where the BRICK BUG CODE has been removed. All stock ICS kernels have the brick bug code.
2. If your ROM multi CSC does not include XSG then it willnot install XSG properly. Right now the ONLY SAFE WAY to have the csc that you want(XSG) is to downgrade to GB that has XSG. Set it to XSG via *#272*IME. Factory reset then check csc again,change as needed. Then Flash the ICS either with Odin or Mobile odin. I have tried this method 2x already. And this is on advice of Dr,. Ketan.

bongski55 said:
1. Safe kernel is one where the BRICK BUG CODE has been removed. All stock ICS kernels have the brick bug code.
2. If your ROM multi CSC does not include XSG then it willnot install XSG properly. Right now the ONLY SAFE WAY to have the csc that you want(XSG) is to downgrade to GB that has XSG. Set it to XSG via *#272*IME. Factory reset then check csc again,change as needed. Then Flash the ICS either with Odin or Mobile odin. I have tried this method 2x already. And this is on advice of Dr,. Ketan.
Click to expand...
Click to collapse
this is the ICS rom I flashed N7000JPLPD---4.0.3/12.06---N7000OJPLP7--- United Arab Emirates (single file)
N7000JPLPD_N7000XXLPT_N7000OJPLP7_XSG.md5 (4.0.3)
I flashed this file via PC odin over the excisting same version rom (4.0.3 MID), but still CSC in recovery mode is MID not XSG.
You mean after downgrading to Gingerbread with prefered united arab emirate rom and performing factory reset the code should change from MID to XSG. am I right?

mohammed_kira said:
this is the ICS rom I flashed N7000JPLPD---4.0.3/12.06---N7000OJPLP7--- United Arab Emirates (single file)
N7000JPLPD_N7000XXLPT_N7000OJPLP7_XSG.md5 (4.0.3)
I flashed this file via PC odin over the excisting same version rom (4.0.3 MID), but still CSC in recovery mode is MID not XSG.
You mean after downgrading to Gingerbread with prefered united arab emirate rom and performing factory reset the code should change from MID to XSG. am I right?
Click to expand...
Click to collapse
Its mean the stock rom didn't do auto full wipe...
So ur CSC still using MID...
Sent from my GT-N7000 using Tapatalk 2

Mr.bongski55
please step by step how to change CSC from MID to XSG in gingerbread official stock ROM
what is the function of this code *#272*IME
what is the Multi CSC rom? could you please explain
also FYI gingerbread roms for middle east only for United arab emirates and saudi arabia, but ICS roms for middle east covering most countries UAE, saudi arabia, egypt, moroco, libya, etc.......
the code of egypt for example in ICS rom is EGY, how to put it in Gingerbread rom which doesn't contains egypt country?????
Thank you very much

mohammed_kira said:
Mr.bongski55
please step by step how to change CSC from MID to XSG in gingerbread official stock ROM and what is the function of this code *#272*IME
Thank you very much
Click to expand...
Click to collapse
*#272*imei#
Is code to change ur csc..
Type it in ur phone...
Its will show csc options..
Chose the csc do u want..
Touch install..
It will do rebooting n factory reset...
Backup ur app n data before do it..
Sent from my GT-N7000 using Tapatalk 2

fahrie12 said:
*#272*imei#
Is code to change ur csc..
Type it in ur phone...
Its will show csc options..
Chose the csc do u want..
Touch install..
It will do rebooting n factory reset...
Backup ur app n data before do it..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thank you for your quick reply
appreciated
please see my edited post#8 again after modifications

mohammed_kira said:
Mr.bongski55
please step by step how to change CSC from MID to XSG in gingerbread official stock ROM
what is the function of this code *#272*IME
what is the Multi CSC rom? could you please explain
also FYI gingerbread roms for middle east only for United arab emirates and saudi arabia, but ICS roms for middle east covering most countries UAE, saudi arabia, egypt, moroco, libya, etc.......
the code of egypt for example in ICS rom is EGY, how to put it in Gingerbread rom which doesn't contains egypt country?????
Thank you very much
Click to expand...
Click to collapse
I hope its wil work..
U must pick the egypt csc from system/csc of other rom using file manager exmple root explorer..
Copy the egypt csc folder n paste to ur gingerbread rom using the file manager to system/csc..
N then reboot ur device..
Remember,u can do it just after ur rom was rooted..
Sent from my GT-N7000 using Tapatalk 2

many thanks fahrie12

mohammed_kira said:
many thanks fahrie12
Click to expand...
Click to collapse
Ur wallcome bud
Sent from my GT-N7000 using Tapatalk 2

Same problem need help
mohammed_kira said:
thank you for your quick reply
appreciated
please see my edited post#8 again after modifications
Click to expand...
Click to collapse
It seems i have the exact same problem, My CSC is MID while i'm using the United Arab Emirates Rom N7000JPLR8_N7000OJPLR8_XSG.
So did it work for you when you change your CSC manualy and what where your steps you followed to do that on the official Stock rom?
Will the steps that you did will work on my N7000 which i am already using N7000JPLR8_N7000OJPLR8_XSG????
See below i have attached screenshots so if anyone esle will be kind to help and explain.
I will also include some of the battery screenshots hope you will like it, coz i don't want to loose any of my battery preformance if i will make any changes although i'm sure that the CSC has nothing to do with battery and ect.
thank you so much
maskour kteer

help update to german version!!!

I have downloaded and installed Country/Carrier Date Android PDA CSC
Greece 2012 July 4.0.4 N7000XXLRI N7000OXXLP8
from sammobile .. But it doesnt have the picture in picure feature yet in that version. Also i have noticed that the german version has better upgades and that the battery keeps longer.. So i have decided to install this one .. but i want to know if there is going to be any problem because my phone has a lot of csc codes but not dbt. will there be any problem when i install it??? do i need to choose from the ones that my phone has the csc code installed????

o u an install any version

nokiamodeln91 said:
o u an install any version
Click to expand...
Click to collapse
are you sure? I dont want to break it..
Also will it change the csc codes that are installed??
or are they preinstalled fron samsung and they cant be changed ....? Because i would like to change it back to my countrys csc code..

I guess it will remain on ur country's code only cuz when I installed a diff country's firmware on my note the csc retained

As nokiamodeln91 said, csc will remain. It won't cause any problems to have the csc set to anything other than Dbt.
Sent from my GT-N7000 using xda premium

SpyderTracks said:
As nokiamodeln91 said, csc will remain. It won't cause any problems to have the csc set to anything other than Dbt.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
What i want to ask is that my phone doesnt have at csc list the code dbt which represents germany, will i have any problem after installing the german firmware without having the dbt code at my phones list?

soultmich said:
Because i would like to change it back to my countrys csc code..
Click to expand...
Click to collapse
no problem..except may be kies / ota updates.. but then u can always download the latest version from sammobile

Actually if you flash by pc odin or mobile odin the csc code is completely obsolete. It matters for ota/ kies updates only.
Sent from my Galaxy Note running ICS

I totally agree. When I flashed XXLRT I got from sammobile, and never bothered with Kies again. PC Odin was more reliable, having more control with the download and flashing. The release of Germany updates is also sooner than Kies or OTA for other phone.

Question Changing CSC only with Odin?

Hello
If I want to change my CSC (MID) to another one let's say the UAE one, can I simply flash Home CSC in Odin?
If yes should I follow the same step as flashing an entire FW ?
And can I find the Home CSC alone or I have to download the full FW Zip?

vegetaleb said:
Hello
If I want to change my CSC (MID) to another one let's say the UAE one, can I simply flash Home CSC in Odin?
If yes should I follow the same step as flashing an entire FW ?
And can I find the Home CSC alone or I have to download the full FW Zip?
Click to expand...
Click to collapse
HOME_CSC does not change the CSC code, you would use the other CSC firmware file.
However, mixing firmware files from different versions or regions is not advisable.
Sadly and to the best of my knowlege it is no longer possible to change CSC using ODIN & flashing just a stock Samung FW pack.
You need to buy credits and use an online service (Samkey?) to change CSC on Samsung phones now.

I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey

manager77 said:
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
Click to expand...
Click to collapse
Hi just out of curious what about other apps like your banking and transportation will there be any serious side effects after you have change the CSC?

Mike Ng said:
Hi just out of curious what about other apps like your banking and transportation will there be any serious side effects after you have change the CSC?
Click to expand...
Click to collapse
All work like before the change.

manager77 said:
All work like before the change.
Click to expand...
Click to collapse
Oh that good thanks for your reply.. I may do it on my set. Been looking for answers able to do this changing the CSC file.
Once again thank you.

manager77 said:
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
Click to expand...
Click to collapse
How you do it ??? I´m on XEZ CSC and it´from Multi CSC OXM. I can´t change it to my ORS (Orange) ??? ORS is from Multi OXM too :/

mirecc21 said:
How you do it ??? I´m on XEZ CSC and it´from Multi CSC OXM. I can´t change it to my ORS (Orange) ??? ORS is from Multi OXM too :/
Click to expand...
Click to collapse
Xid is not from multi csc, it's single csc.

But how about to change first to to XID and then to the wanted CSC Region ?
Refer: https://forum.xda-developers.com/t/...mware-sm-g998b-27th-jan.4218529/post-84367239

android-utelias said:
But how about to change first to to XID and then to the wanted CSC Region ?
Refer: https://forum.xda-developers.com/t/...mware-sm-g998b-27th-jan.4218529/post-84367239
Click to expand...
Click to collapse
Yes it will work I think. I changed with DBT to XID and today I flash DBT back and I have DBT. So I think different countries should change as follows. And I don't have to use samkey

i have downloaded a full firmware for my s20 plus 5g Korean version, and i also downloaded the full firmware of s20 plus from the Philippines. i want to change my csc to Philippines using Odin. should i check all the file inside the s20 plus firmware from the philippines or just the CSC file only? then the rest is from my s20 plus 5g firmware file