Hello,
pls someone help me!
I tried to install cm7.1 to my I9000 phone (android 2.1 was running on my phone, and didn't rooted)... I followed wiki description... I finished "Installing the ClockworkMod Recovery" section. But it seems was not successfully (command prompt showed it was succesfully).
The phone always try to boot. I can put into download mode (Odin cannot recognize it ) but can not put into recovery mode...
I don't know how to continue!
Download the samsun kies and install it (for the drivers), then try to flashe it
is it not problem than 2.1 was running on pone and it didn't rooted before i tried to installed cm7.1?
totoo0915 said:
is it not problem than 2.1 was running on pone and it didn't rooted before i tried to installed cm7.1?
Click to expand...
Click to collapse
You must put on the phone the 2.3.6 I9000JVU then installl the CF-Root for it and install CM7.1, but I recomande you CM7.2 or CM9 or 4.0.4 from Elitemovil beta 8
it sounds well... but i'm not perfect in it... i'm greenhorn...
if i understand well i should do this steps:
1) install kies with official driver...
2) find tutorial to install 2.3.5
3) root
4) install cm7.1 (cm7.2)
is it right?
Dirvers ok
huh...
I reinstalled Samsung Drivers and now Odin 1.83 recognise my Phone...
I've got 2 question:
1) android 2.1 was running on my phone... can I upgrade to 2.3.6 directly or at first upgrade to 2.2 and after ugrade 2.3?
2) if I upgrade 2.3.6 official version, download mode will remain?
pls help!
Related
Would anyone be kind enough to tell me how I can flash CM7 with Odin? I tried installing Heimdall, and I cannot get past error 12, and also error 3, so IDK what is up with that. Odin works, and I've used it to flash the overcome rom before. But I don't know in what order to flash the files, or if I need to reboot and flash more files, etc.
My tab is on ... GT-P1000, firmware 2.3.3, baseband P1000XXJPZ,
Kernel 2.6.35.7 [email protected] #2, build number GINGERBREAD.XXJQ1
Please. Thank you.
Why not just flash via cwr
maxtcee said:
Why not just flash via cwr
Click to expand...
Click to collapse
Sorry, I forgot to mention that I tried that, and it did not work for me.
S, have you rooted the tab and installed CWM or just flashed the rooted kernel with CWM already cooked in?
Its no good just flashing to gingerbread.
Also, with Heimdall, you need to flash the drivers 1st. Its called Zadig.exe in the drivers folder. It won't work otherwise ( this will take a little while, it even says so).
If you want to go back to Samsung drivers afterwards, just put the tab into download mode again (after flash is complete) and rollback the drivers. This has worked multiple times on my PC using Windows 7 64 bit...
I just bought my Galaxy S and it came with 2.3, I tried to install CM7 but it left my phone unbootable so I used Odin to install 2.2, after that I tried to upgrade to 2.3 again using Kies but it said the fw I'm using cant be upgraded.
Now still on 2.2 I followed:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
I got to the point where I flash the new kernal and now my phone freezes once it reaches lockscreen. I've tried reflashing lots of times. All I can do is access download mode...is there anyway to just completely restore the phone to 2.3 or CM7 from download mode?
My Galaxy S is i9000 and unbranded from the UK
Thanks for any help
Put Darky and then u can install whatever u want. http://forum.xda-developers.com/showthread.php?t=814091
My problem briefly :
my phone was Not rooted
i've installed (hardcore-speedmod-i9000) zImage via heimdall-frontend app.
now my phone run the download-mode (but i don't know what i can do to it) and it doesn't run into the ClockworkMod Recovery ... and doesn't run into the normal operating mode .. just the plain black Samsung Galaxy I9000 screen ....
i tried Pwr+VolDwn for 10 sec. nothing ..
can someone here help me please ...
files downloaded are from CyanogenMod wiki official website
my only problem is i found lately that i need my phone rooted ...
i'd appreciate it if someone helps me here
Odin flashed to stock JVT, after which to kernel Semaphore JVT 1.8.2
Now, phone is Rooted!
Next dl Rom Manager from market (Recommended to buy premium, show support)
Flash Cwm Recovery 3.x.x.x, choose Samsung GalaxyS i9000(MTD)
DL rom, choose cm7.1 stable ...wipe everything and flash...
thanks a lot man i'm now using cyanogen 7.1 and my phone is working i thought it is bricked and must have it repaired in a store or something
Here is my question: I have a SGS i9000 with froyo 2.2 stock and cf-root, by flashing cf-root i gained obviously root but also the recovery 2e that should be without signature verification. Now if i want to install CM7.2 can i just install it via recovery 2e by renaming it update.zip? or i will brick the phone? On Cm official wiki page about installing they say you need to have gingerbread installed but i'm on mac and i can't flash a gb rom because heimdall is not detecting the file, i also tried with a linux partition on my mac but it did not worked. to get root i used first z4root and then mobile odin to flash cf root with recovery 2e.
thanks in advance to who will help me!
PS: I also have a I9001(see signature) but the phone for wich i'm asking is a i9000!
dagothe9 said:
but i'm on mac and i can't flash a gb rom because heimdall is not detecting the file,
Click to expand...
Click to collapse
download KIES for Mac from My Android collections link below, and upgrade your phone to Gingerbread 2.3.6 (KIES will do it automatically) than root it with a semaphore kernel to get CWM, before going on to ICS and than to JB...should be done in this manner , do not jump from GB to JB ( you will have less problems)
xsenman said:
download KIES for Mac from My Android collections link below, and upgrade your phone to Gingerbread 2.3.6 (KIES will do it automatically) than root it with a semaphore kernel to get CWM, before going on to ICS and than to JB...should be done in this manner , do not jump from GB to JB ( you will have less problems)
Click to expand...
Click to collapse
ok i will try it, but kies from samsung site is not working at all. and moreover i have this problem, i just want to go from froyo to CyanogenMod 7.2 (android 2.3.6 GB). without any intention to go to ICS or JB. Second thing, if i manage to update from kies then heimdall is going to recognise it? Because if not i can't flash semaphore. Last thing i should uroot the device to update from kies right?
Many thanks for your help!
new information: I have installed your version of kies, and it finally recognise the phone, but it say that the device do not support update via kies, what can i do? thanks
Second edit: i researched and now i know the problem is that i cf-rooted my phone. so how could i revert? to cf-root i have used mobile odin after gained SU with z4root. i would had avoided to flash that if i had know that today kies were to recognise my phone! please help me lso if it was a noob mistake.
dagothe9 said:
new information: I have installed your version of kies, and it finally recognise the phone, but it say that the device do not support update via kies, what can i do? thanks
Click to expand...
Click to collapse
Ok, since you have installed KIES and working , heimdall should also be working, IF not you can download a latest heimdall mac version, from earlier link to update to ginger bread 2.3.6, before CM..also backup efs. contacts, images etc first, IF you have CWM, you can even do a nandroid backup, before any upgrade .
Always best to do progressive upgrade as it will not complicate the upgrade by jumping from froyo to CM ( which is a custom ROM) . Best to READ the developers Flashing guidelines before upgrade too.
Flashing the gingerbread ROM will automatically remove your earlier CF root, just download your original Firmware for your region from http://forum.xda-developers.com/showthread.php?t=1102881 , than use a semaphore Kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 this will give you root plus CWM for you to upgrade to CM 7.2
Do not jump, as you need Gingerbread bootloaders for upgrade to CM
Solved!
xsenman said:
Ok, since you have installed KIES and working , heimdall should also be working, IF not you can download a latest heimdall mac version, from earlier link to update to ginger bread 2.3.6, before CM..also backup efs. contacts, images etc first, IF you have CWM, you can even do a nandroid backup, before any upgrade .
Always best to do progressive upgrade as it will not complicate the upgrade by jumping from froyo to CM ( which is a custom ROM) . Best to READ the developers Flashing guidelines before upgrade too.
Flashing the gingerbread ROM will automatically remove your earlier CF root, just download your original Firmware for your region from http://forum.xda-developers.com/showthread.php?t=1102881 , than use a semaphore Kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 this will give you root plus CWM for you to upgrade to CM 7.2
Do not jump, as you need Gingerbread bootloaders for upgrade to CM
Click to expand...
Click to collapse
Ok the problem was with froyo secondary bootloader, that is not recognised by heimdall if connected to a mac, nor to a VM Linux on the same mac. so i had borrowed my neighbour's netbook with windows 7. installed heimdall there and everything went smoothly. Firstly i have flashed a new GB rom, 2.3.6, the newer eropean one, then flashed CF-root for that rom with integrated CWM 3.x.x.x. The only problem was that when i flashed from cwm CM7.2.0 i hade a boot loop, so i had to swith off the fone by long pressing the power botton, then i booted in recovery, now the recovery was cwm 5.x.x.x so i wiped data/factpry reset and wiped cache, from the new cwm 5.x.x.x reinstalled CM7.2.0's zip and the latest gapps, booted again and everything went smooth from there.
Thanks for your help!
Hello guyz,
I have a friend's i9000 and he wants me to flash CM10.1 on his phone.
Problem is the phone is in 2.2.1 (Froyo) and as fas as i know CWM can be installed on Gingerbread and above. So i went ahead and connected it to Kies to update it, but it stucks on Connecting.. forever and eventually it throughs me a message about activating (or deactivating..) USB debugging). I tried with both USB Debugging on and off and the result is the same. It stays forever to Connecting state.
I tried to find Samsung Stock Roms in 2.3 version but cannot find any. I flashed with Odin other stock froyo's and still the same. Kies won't connect.
So i currently am at 2.2.1 FROYO.XWJSD and i just downloaded ROM Manager and flashed CWM for i9000. Within Rom Manager under Recovery Setup, it says on both Current Recovery and Latest Recovery: ClockworkMod 2.5.1.2But when i press the 3-button combo it boots to Samsung Recovery..
Any ideas?
Thank you
Warlord1981 said:
Hello guyz,
I have a friend's i9000 and he wants me to flash CM10.1 on his phone.
Problem is the phone is in 2.2.1 (Froyo) and as fas as i know CWM can be installed on Gingerbread and above. So i went ahead and connected it to Kies to update it, but it stucks on Connecting.. forever and eventually it throughs me a message about activating (or deactivating..) USB debugging). I tried with both USB Debugging on and off and the result is the same. It stays forever to Connecting state.
I tried to find Samsung Stock Roms in 2.3 version but cannot find any. I flashed with Odin other stock froyo's and still the same. Kies won't connect.
So i currently am at 2.2.1 FROYO.XWJSD and i just downloaded ROM Manager and flashed CWM for i9000. Within Rom Manager under Recovery Setup, it says on both Current Recovery and Latest Recovery: ClockworkMod 2.5.1.2But when i press the 3-button combo it boots to Samsung Recovery..
Any ideas?
Thank you
Click to expand...
Click to collapse
You will have to upgrade to GB first, root and then continue install ICS/JB. To these, follow this page http://forum.xda-developers.com/showthread.php?t=2057161