[Q] I think I killed my HD7....... - HD7 Q&A, Help & Troubleshooting

I noticed that my camera button wasn't operating, so I prised it back into position with a small thin piece of plastic.
After that I pressed the button and noted that it worked.
But at a cost of my screen
At first the screen was viewable, just had the banding across the LCD. But when I woke up the next day, the whole screen had gone (with a dirty great black crack that had spread), and in the bottom right corner I could make out the screen for memory card errors (with option of emergency call/turn off).
While I know it is able to be fixed, I don't feel confident enough to try and fix it myself (as I know I'll end up botching the digitizer which still works), and I'm not too enamoured with paying up to £100 for it to be fixed.
Question is, what do you reckon the value would be for "spares & repair" on ebay, etc?

Related

Problems with Alpine touchscreen

Recently I added a screen protector to my Alpine, and after that the screen started acting funny any time it was left alone. Removing the screen protector has made no difference.
After a short while of not being used, the screen becomes misaligned, for example if I leave it off for an hour, attempting to activate the start menu on the today screen will result in one of the today items being pushed, or attempting to select a number on the password entry will result in a different number being pressed.
The strange thing is I can re-align the screen through the control panel, but it will slowly go back to the way it was.
Anyone got any thoughts? At worst, I'll just refund it (I bought it where I work, and thats no problem) and get another handset, but if theres a fix I'd prefer to stick with my current handset.
Cheers in advance for any help!
I am not sure about this, but I had the same problem with Motorola A1000 touch screen - could it be that an excessive pressure was applied to one of the sides of the digitizer during the application of screen protector? The digitizer is glued on the LCD, there might be a remote chance that it has slid a little to one side. Also some extra glue could have shortened the contacts on the bottom part of the digitizer. I would try to clean it first with some anti-static liquid. Hope this helps..
Indeed, this sounds like there could be more pressure to one side of the screen than the other, hence the digitiser tries to adjust for the pressure difference and gradually falls out of sync.
Try reapplying your screen protector, more gently than last time if possible, but don't wipe from side to side, wipe from top to bottom with an even pressure. Also, try realigning the screen with the protector off before reapplying it.
I had a problem with my screen originally before I got my screen protector, insofar as I got that 'rainbow' pooling effect in the centre of the screen where the digitiser was touching the LCD layer - after about a week after application of the screen protector, however, the more even layer of tension provided by the protector somehow pulled the digitiser away from the LCD layer, so my screen has actually gotten better since then... That said, I could imagine that uneven tension on the top layer could lift the LCD and digitiser layers further away from each other on one side than on the other, causing the problem you describe here. If you can bear to, try using the phone for a couple of days without the protective top layer applied, and see if the alignment gradually slips out as it's doing at the moment.
I've been using the phone for the past two days without the protective cover on. I'm going to reapply it now and then see how it goes tomorrow. If its still screwed, I'll reflash it to the O2 ROM and refund it at work on Tuesday.
Got a replacement, so no problem now. Thanks for the help anyhow

screen defect?

I just got a tilt about a week ago and ive noticed that in the middle of the screen there seems to be a purple greenish tint when put against incandescent light. The size of said glint varies in size but i'm unable to see what changes the size. Not sure if its heat or pressure or something. The touch screen works perfectly its just really annoying to always see such an annoying glint.
An interesting discovery is that when i press all four corners of the screen it disappears and when i press in the middle of the little square it seems to spread out. I feel like theres some kind of material or something in the touch screen that is causing this due to pressure. I keep it in a hard case in my pocket so the screen isnt pressed on inadvertently.
I've searched the forum for any answers but i havent seen anything about it. Any response or help would be greatly appreciated. I'll try to get a picture of it up asap but i left my camera at a friends house and dont know when im getting it back...thanks in advanced
~sayazs
Do you see the same "annoying glint" under neon light (not day / sunlight)?
Lots of NOKIA and SONY ERICSSON phones for example get this screen recolorization under direct sunlight - this has nothing to do with the screen being defective but with the plastic above the screen which breaks the light and shows you this colored spots. If you can't see the same spot under direct neon light then this might be the cause.
It is normal that you get color changes while pressing the screen in. First of, you press / bent the protecting plastic and the liquid within the screen which causes the incoming light to break in a different angle, therefore the color changes. (BTW: you shouldn't do that too often, it can cause permanent stains on your screen!).
There sure is the possibility that your screen gets pressure from underneath due bad assembling! If you're still under warranty, try to get a replacement.
yeah you cant see it in day light. but i feel as though there is constant pressure on the screen between the plastic and liquid since the spot is always there and doesnt really go away (unless of course in daylight).
well im thinking im going to go back for a replacement. thanks for the quick answer!

[Q] Just when gingerbread made my phone useable...(broken screen questions)

I drop the thing and render it unuseable
I damaged the internal LCD screen after a fall of about 3 feet and now it's completely black apart from a few coloured lines in the top corner, but otherwise the phone is completely intact (no broken glass etc) and the touch screen appears to be functioning (if someone calls me, i can hang up by pressing where i think the 'end call' button should be)
I could get a replacement lcd off ebay for £80, but i think i would be better off selling the thing for upwards of 100 on ebay and putting the cost toward a new contract Galaxy 2..
now the question...I have no screen. I am not in Kies Mode...i'm not even sure if I turned on USB development after the 2.3 update...so...How do i wipe the thing before I put it on ebay?!

[Q] Touch screen not working

My Droid's touch screen isn't working in the center vertically all the way down. I can still use the 'edges' of the screen. I need to use the middle of the screen for a few things (not transfering stuff over). Is there any way I can 'project' my Droids screen to my computer and click/touch in it to use it?
Thanks in advance for all help. It's appreciated
~mfungah
Edit: This is the original Motorola Droid.
I have the same problem on the right side of my milestone :S
I had the same problem, but from the back arrow upwards, specially when the phone got hot. As my phone was still on the warranty period, I flashed it back to stock and updated it to the official 2.2., took it to an Orange shop and got it back after almost a month: they basically changed the whole top part of the phone (I got a brand new screen )
Repair problem
I had a same failure. The touch panel was bad. I ordered one from eBay. It also came as well put it. It works well. Only so much wrong with me that for some reason the phone stacked in landscape mode, I can't change to portrait mode. What is wrong? I put together something wrong? I do not think so. Everything else goes. (or so it seems)
This has to do with the digitizer (the glass you touch over the top of the LCD you see) being defective or unsealed. This is due to environmental moisture finding its way into the phone and f**king with the electrictal signals sent by touching the screen. There is a 'phantom touch' issue that seems to happen before or during the vertical unresponsiveness, and that can usually be temporarily remedied by firmly pushing your screen downwards (your phone may restart) and taking a blowdryer to your phone until it's just hot enough to be uncomfortable to hold (and no longer take it into the bathroom while you shower). One way or another, you're going to have to replace your digitizer eventually.
Sent from my Droid using XDA App
I had the same problem months ago but it's now fixed.
STEPS:
1. Digitizer I bought from this guy:
http://cgi.ebay.ph/New-Touch-Screen-Digitizer-Motorola-Milestone-A853-/270780531 891?pt=UK_Replacement_Parts_Tools&hash=item3f0bc704b3#ht_2811wt_850
2. Dissasembly Videos (I advice you to watch them repeatedly before dissasembly):
http://www.youtube.com/watch?v=6d7ETMfgq2s
http://www.youtube.com/watch?v=dE81IaQHEHc
3. Phillips screw driver( for dealing with hard screws around the screen): Because I don't want you to use the low quality screw driver supplied with the digitizer.
4. Double sided tape: I got mine from a hardware shop for only P19. Buy a the more expensive tape(P100+) but look for a very thin one! You will use the cheap weak tape to stick some internal parts and use the Hard tape to stick the external casing. EDIT: I just used the cheap one for everything and it's strong enough.
5. PATIENCE: Don't be in a hurry. I even paused from time to time to get a better idea about what to do next. Get the feel of being a perfectionist (that same additude when I applied a screen protector )
That's the guide from me who haven't dissasembled a phone in my entire life but my milestone. So if something bad and technical that happens along the way then my knowledge can't help.. sorry.
Good luck bro!!

[Q] Dropped my phone, something inside broke.

So yeah, it was more like a throw than a drop and a very bad throw too (the phone went from around my head height and managed to go around 15 feet ahead of me). Still, being lucky the only external damage the device has was some scratches on the back. The front remained unharmed, however I could not turn the screen on, the backlight would turn on but no colour appearred other than a small white crack in the corner, meaning the screen inside broke or some. The phone can still register touches, vibrate and play sound. I managed to blindly enter the pattern lock, go inside and power the phone off. So I think it's the part that produces color that broke. I would like to know how a repair of that will approximately cost and what actually broke in the phone.

Categories

Resources