Well i just installed Cm9. I just came form the normal web os. For some reason i cant connect to wifi.
Ventus_zx said:
Well i just installed Cm9. I just came form the normal web os. For some reason i cant connect to wifi.
Click to expand...
Click to collapse
Turning it off then on again usually does the trick
Wow XD it worked. Thanks! MAn ics is awesome on tablets!
and you were too lazy to try that on your own or look it up here in the threads, dude you should be banned from xda and even using any type of smart device
Wifi isn't working again -_-
Sent from my SGH-T959 using XDA App
Ventus_zx said:
Wifi isn't working again -_-
Click to expand...
Click to collapse
If you are in charge of the router, set it to a low channel (1-5 or 1-6). That solved my problems.
If it does not, there are more discussions in the forums, although in my impression some of the recommended cures are rather "obscure".
what are other ways?
Ventus_zx said:
what are other ways?
Click to expand...
Click to collapse
Maybe try to installing rohan modpack v1.4 or v1.5 which basically almost the same the only thing I see different the V1.5 without v6 supercharged mod
Ventus_zx said:
what are other ways?
Click to expand...
Click to collapse
My wifi worked everywhere but my house, which used WPA2. Once I changed that from AES to TKIP encryption, it connects smoothly every time.
There are new drivers some people are using, but they don't sleep correctly, and you'll lose battery a lot faster. It's pretty much going to be a trial and error process to figure out what works for your setup.
Try while wifi on, forget the network -> turn wifi off -> turn wifi on -> connect to the network again. This shoud work but have to repeat everytime you reboot your tp.
Used to have this problem, i install different kernel -> back to original kernel boom. It works
Sent from my cm_tenderloin using Tapatalk
AES is much more secure than TKIP - which has known vulnerabilities and can be cracked much easier.
A few more things to do to help:
- Set your router to one of the lower 6 channels
- Set your router to use AES security only,
- Set your router to use wireless mode G & N (or G Only, if you have B but not N - this will allow for it to use N if possible, but everything else that isn't N can use G as well)
- Go into Wireless => Advanced settings on your tablet, and set your Regulatory Domain to 11.
Then reboot your tablet, remove the saved network you had, and reconnect to it. You should be good from then on out. My tablet has zero problem reconnecting with these settings, on four different router setups (Telus Optik all-inclusive, D-Link stock, Linksys stock, and DD-WRT customized).
Related
So I'm having Wifi Connection issues on my Mile stone. I'm running the Lastest STABLE version from Miui.us. Problem is I can connect but within a min or two of connection it looses connection and says wifi out of range even if Im standing right next to it. If I forget the connection and restart my router it will find it and connect again and do the same thing. I've tried my cousins Samsung Vibrant on my wireless router and he doesn't have any issues so I know its not the router itself. Any Idea's on how to fix this guys?
TaintedCross said:
So I'm having Wifi Connection issues on my Mile stone. I'm running the Lastest STABLE version from Miui.us. Problem is I can connect but within a min or two of connection it looses connection and says wifi out of range even if Im standing right next to it. If I forget the connection and restart my router it will find it and connect again and do the same thing. I've tried my cousins Samsung Vibrant on my wireless router and he doesn't have any issues so I know its not the router itself. Any Idea's on how to fix this guys?
Click to expand...
Click to collapse
I've had some success with changing the wifi sleep policy in the advanced tab of the WiFi settings.
Sent from my Milestone using xda premium
skadude66 said:
I've had some success with changing the wifi sleep policy in the advanced tab of the WiFi settings.
Sent from my Milestone using xda premium
Click to expand...
Click to collapse
Pretty much solved the issue, never even thought about it. Thanks.
skadude66 said:
I've had some success with changing the wifi sleep policy in the advanced tab of the WiFi settings.
Sent from my Milestone using xda premium
Click to expand...
Click to collapse
Gonna give this a try. Thanks! Hope it works, the latest (1.9.9) is so stable and fast its unbelievable.
osmanzeki said:
Gonna give this a try. Thanks! Hope it works, the latest (1.9.9) is so stable and fast its unbelievable.
Click to expand...
Click to collapse
Isn't 1.9.9 beta?
TaintedCross said:
Isn't 1.9.9 beta?
Click to expand...
Click to collapse
Yeah, 1.9.9 is a beta development build, but he's just remarking how stable it really is.
Hi, I have the same problem with WIFI, I cahanged the slep policy, and when I activate Wifi it's starting scanning for nothing, no wifi Network appears and when I can connect, after a whie it's disconnecting itself and doesn't reconnect. Somebody knows the problem?..I'm using MIUI android v1.9.9
I'm not sure, I updated to 1.9.16 and I'm having some issues with mine but not as bad. The weird thing is wifi won't work if the mobile data network is enable, when i turn that off my wifi will connect but if i get even like 10 feet away from the router it starts having connection issues and sometimes when im right next to it. But no where as bad as it was before.
Currently I'm using wifi tether with an unrooted Toshiba thrive, non-ad-hoc mode. I know that someone else has already posted this on here, but I have found a way to use it without it setting itself up as ad-hoc, and I couldn't find the other post about it. I did not write this program so I take no credit for it.
0. Need to have root, and I'm currently in gingerbread
1. dl the latest beta (currently 6) of wifi tether from here http://code.google.com/p/android-wifi-tether/
2. After you have done that you need to go into "settings", go to "change device profile" go down to "LG optimus s" and select that
3. Now go down to "change LAN" and select "192.168.1.0/24"
4. Enjoy the blazing speed of 4g on something other than you revo
I'm not saying this will work for everyone, I am rooted as well as having gingerbread, so this may be another caviat to it. But try it anyway, what's the worst that can happen. And if anyone else has any other settings that may help, please share
Sent from my AT100 using Tapatalk
Ya, DSpair in IRC had found this out a week or two ago, but all you have to do is select Optimus S as device and Softap under set up method. Worked perfect for my Galaxy Tab.
Sent from my VS910 4G using xda premium
That's awesome, sorry if what i put up was a repost, i just hadn't seen any info on this specifically.
Sent from my VS910 4G using Tapatalk
Wow finally I got my phone to beacon infastructure! Thanks!
Unless I am not seeing it, I can't find a setting to disable 'n' mode. That mode tends to cause the connection to fluctuate from 6Mpbs to 65Mbps and basically loses connection just as the problem with the 4gHotSpot App.
Overall, great find. I tried that once before but couldn't get any of the profiles to work. Can't remember if "LG Optimus s" was on it at the time and maybe changed the network to 192.168.1.0 was the trick.
Connects and Windows will auto connect and it IS Infrastructure. Just hope I can find a way to disable 'n' mode so I can maintain a strong connection. When I went to 'g' only mode in HotSpot, I maintained a solid, no dropout connection rate. Sure, n at 65Mbps would be nice, but g works and is fast enough for tethering and what the standard tethering apps use (the 54Mbps speed)..
Thanks for the heads up and the post!
-Cybie
PS. The only part I don't like about the find is it de-motivates me to figure out the HotSpot app per my post/thread, lol. But, I can live with that!
EDIT: The speed I am referring to is the link speed with the Windows Task Manager/Networking tab. When the phone connects, it's 'LinkSpeed' is 65Mbps. When you access internet, or not always so, it will drop the Link Speed down to 6Mbps. If you try to use SpeedTest.Net or Speakeasy.net/speedtest, they will usually come to a halt on download testing near the end. That's the Wifi dropping out. With this and the 4gHotSpot, that will happen. But as soon as I changed the HotSpot to 'g' only connection (at 54Mbps Link Speed), it maintained and never dropped out.
I've had absolutely no problems with fluctuation of service when it comes to internet as long as i have 3g or better service.
Sent from my VS910 4G using Tapatalk
Interesting... I finally got it to work this way. Previously I had been using the standard ad-hoc method, and when I'd switch over my Nook Color couldn't obtain an IP address.
The apparent solution(s) was to put it in SoftAp (still would not get IP address), then forget the connection (left over from ad-hoc) and reconnect.
Seems to work like a charm now.
I just leave it on auto, i wasn't really sure what each method was
Sent from my VS910 4G using Tapatalk
bken620 said:
I just leave it on auto, i wasn't really sure what each method was
Sent from my VS910 4G using Tapatalk
Click to expand...
Click to collapse
That's what I was doing, and it seemed to work fine, but leaving it on auto means it's ad-hoc. I guess some people have had issues with ad-hoc, hence the need for true infrastructure, but I personally have been able to get anything I want to connect to ad-hoc. Of course, I don't own a high end tab...
majorpay said:
That's what I was doing, and it seemed to work fine, but leaving it on auto means it's ad-hoc. I guess some people have had issues with ad-hoc, hence the need for true infrastructure, but I personally have been able to get anything I want to connect to ad-hoc. Of course, I don't own a high end tab...
Click to expand...
Click to collapse
The one thing you can't get to connect to ad-hoc is another android device. At least none that I know of. It's an issue the Google is supposed to be working on. The other problem with ad-hoc, such as tethering Windows (mainly because Windows has the lamest networking abilities) is that it won't connect automatically. Windows will automatically sense Infrastructure and if you've selected to automatically connect, it will do so every time you switch on tethering. With ad-hoc, you don't have the auto connect ability within Windows. At least not without any 3rd party software/hacks that I'm not currently aware of.
-Cybie
I notice that the wifi tether always drop then reconnect every 30-45min connected to my laptop or desktop both win 7 64bit even when my phone screen is on but when the screen is off it'll take much longer for the tether to reconnect and sometimes it won't connect until I turn the screen back on. When the screen is off it tend to drop more frequently 15-20mins.
Are there a way to fix this?
My tether settings
Optima s - ad hoc - 192.168.1.0/24 - disable wake/lock - client approval on
I'm using wifi tether 3.1 pre100
This also happen when I was using 3.1 beta6 that's when I download and install the newer version 3.1 pre100
They just release 3.1 pre101 I'm thinking of trying that to see if that'll fix the bugs
SuperCharged GingerVolt B-) R U?
Just picked up a LG Revo the other day off of craigslist and the first thing I did was install gingervolt 1.2 and android-wifi-tether 3.1 pre6. It's only been a day but so far so good. Wifi tether is working and the phone is super fast.
I'm hoping a future version of wifi tether will allow the phone to adjust wifi broadcast power and/or include bluetooth pan. 4G + wifi tether is sucking up about 20% an hour right now.
ojo8 said:
Just picked up a LG Revo the other day off of craigslist and the first thing I did was install gingervolt 1.2 and android-wifi-tether 3.1 pre6. It's only been a day but so far so good. Wifi tether is working and the phone is super fast.
I'm hoping a future version of wifi tether will allow the phone to adjust wifi broadcast power and/or include bluetooth pan. 4G + wifi tether is sucking up about 20% an hour right now.
Click to expand...
Click to collapse
Since my laptop and pc connect to ad-hov only I adjust the transmit power to 3mW and do notice it uses lesser power and since my phone is always close to the pc/laptop I don't need to set it to high.
This setting is only for ad-hoc " 3mW-30mW "
SuperCharged GingerVolt B-) R U?
bhp117 said:
Since my laptop and pc connect to ad-hov only I adjust the transmit power to 3mW and do notice it uses lesser power and since my phone is always close to the pc/laptop I don't need to set it to high.
This setting is only for ad-hoc " 3mW-30mW "
SuperCharged GingerVolt B-) R U?
Click to expand...
Click to collapse
SuperCharged GingerVolt B-) R U?
bhp117 said:
I notice that the wifi tether always drop then reconnect every 30-45min connected to my laptop or desktop both win 7 64bit even when my phone screen is on but when the screen is off it'll take much longer for the tether to reconnect and sometimes it won't connect until I turn the screen back on. When the screen is off it tend to drop more frequently 15-20mins.
Are there a way to fix this?
My tether settings
Optima s - ad hoc - 192.168.1.0/24 - disable wake/lock - client approval on
I'm using wifi tether 3.1 pre100
This also happen when I was using 3.1 beta6 that's when I download and install the newer version 3.1 pre100
They just release 3.1 pre101 I'm thinking of trying that to see if that'll fix the bugs
SuperCharged GingerVolt B-) R U?
Click to expand...
Click to collapse
If you're using ad-hoc and that works fine for your needs, I would recommend Garden Tether on the market. Never had an issue with it working other than not able to connect my friends 3g android phone to mine for faster downloads.
-Cybie
Cybie257 said:
If you're using ad-hoc and that works fine for your needs, I would recommend Garden Tether on the market. Never had an issue with it working other than not able to connect my friends 3g android phone to mine for faster downloads.
-Cybie
Click to expand...
Click to collapse
Thanx I'll try that out
SuperCharged GingerVolt B-) R U?
What's the difference between Garden tether and android-wifi-tether?
I tried both of them and besides for some art work they look identical, right down to the settings page.
ojo8 said:
What's the difference between Garden tether and android-wifi-tether?
I tried both of them and besides for some art work they look identical, right down to the settings page.
Click to expand...
Click to collapse
I was having problems w wifi tether because it kept on disconnecting so I tried the garden wifi, at first glance it do feel the same and after a day of use I haven't gotten disconnected yetso far its working good
SuperCharged GingerVolt B-) R U?
ojo8 said:
What's the difference between Garden tether and android-wifi-tether?
I tried both of them and besides for some art work they look identical, right down to the settings page.
Click to expand...
Click to collapse
I couldn't tell you, but my guess is that the one in the market is the non-beta version...but that's only a guess, sorry.
ojo8 said:
What's the difference between Garden tether and android-wifi-tether?
I tried both of them and besides for some art work they look identical, right down to the settings page.
Click to expand...
Click to collapse
Garden Tether is ad-hoc only. It's stable and available in the market. It's, in my opinion, the best overall reliable/working tether app out. I've never had any disconnect issues.
Aside from the Verizon 4g Hot Spot app, the wifi tether beta allows infrastructure connectivity along with ad-hoc. If you've ever tried to connect an Android device to an ad-hoc only network, it's likely it either didn't 'see' it, or couldn't connect. Other devices out there fail to connect to ad-hoc also, so infrastructure is needed.
And, look closer. These two apps don't look identical within the settings.. Close, but different.
-Cybie
Sent from my VS910 4G using XDA App
Hello,
I've installed on my X8 Froyo Pro v01 for X8 (Revised from FroyoBread) from XDA-RK. The rom works fine except that im having a problem with the wi-fi. In his features he says "Wi-Fi "n" Standard enabled" and when i tried to connect to my router after the installation of the rom the router actually crashed! No connection was warking even with ethernet. I've tried this a couple times (by restarting the router) but without luck. What i did in order to make it work and connect to wireless is that i change the wi-fi in the router to use mixed mode for B/G devices. I was wondering if there's a way to disable the N setting in X8 or do something else in order to make it work.
Thanks in advance.
It should work it work for me. Anyway try to change standard in settings of your router
Sent from my XPERIA X8 using XDA App
dsaklein said:
It should work it work for me. Anyway try to change standard in settings of your router
Sent from my XPERIA X8 using XDA App
Click to expand...
Click to collapse
That's what I did to make it work actually as I said. I had to change the wifi mode to work for Mixed Mode B/G devices only. Previously was on Mixed Mode (B/G/N devices).
When I used Froyobread 0.23b the wifi was working perfectly without changing anything in the router. I think it has to do with the "N standard" feauture that was added on Froyopro but im not sure. I've searched if there was an option to disable it but either i cant find or it doesnt exist (for now at least).
Search forum fie tweaks! There is a tweak for enabling n standard so you can disable it
Sent from my XPERIA X8 using XDA App
never experienced it.. im using edimax btw... try deleting the remembered configure and make new configurations
did you make a full wipe after installing the Rom?
Yes I always do a full wipe when changing roms for these kind of problems. I'll check the tweak so i can disable N standard
leingod0923 said:
never experienced it.. im using edimax btw... try deleting the remembered configure and make new configurations
Click to expand...
Click to collapse
You mean the configure on my X8? Cause I did and still nothing :/
Hi,
I`m also having WiFi issues with this Rom.
Beside that, I really like this one. Great battery life!
But I need to get WiFi working.
Any suggestions?
I have tried everithing, but the wifi continues the same, poor and intermittent connection.
Tried with home, work and public networks, the same.
ungrus said:
Hi,
I`m also having WiFi issues with this Rom.
Beside that, I really like this one. Great battery life!
But I need to get WiFi working.
Any suggestions?
I have tried everithing, but the wifi continues the same, poor and intermittent connection.
Tried with home, work and public networks, the same.
Click to expand...
Click to collapse
Actually I managed to disable the N standard option of the WiFi and now it works fine with no issues. Search the thread how to enable N standard WiFi.
Sent from my XPERIA X8 using XDA App
I'm wondering if anyone running either cm 10 or Pac roms is having issues after a few weeks, of wifi attempting to connect then saying saved and doing that over and over again and not connecting. I know other people not necessarily using this phone have had this issue before but, I can't seem to find any solutions to the problem. I am currently running Pac all in one Rom and it was working great until today but, I have had these issues on cm 10 before and the only thing that seems to fix is to flash a new Rom and I like this one and don't want to re-flash.
Sent from my MB886 using xda app-developers app
Mine was doing that but a dirty flash fixed it and I still have all my settings.
Sent from my PACMAN MATRIX HD MAXX
For me It is doing this on stock sometime.
Sent from my MB886 using xda premium
Hogman500 said:
I'm wondering if anyone running either cm 10 or Pac roms is having issues after a few weeks, of wifi attempting to connect then saying saved and doing that over and over again and not connecting. I know other people not necessarily using this phone have had this issue before but, I can't seem to find any solutions to the problem. I am currently running Pac all in one Rom and it was working great until today but, I have had these issues on cm 10 before and the only thing that seems to fix is to flash a new Rom and I like this one and don't want to re-flash.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I always get this issue on custom ROMs
Sent from my MB886 using xda premium
I've been having this issue as well, again and again.. I've had about a 50/50 success rate with dirty flashing. Anyway, I believe the problem has something to do with the dhcp assigned ip addresses from the router. It's something on the phone side of it because changing dhcp settings,lease times etc., on the router have no effect. When you lose WiFi and it goes into that loop and won't connect, go into WiFi settings, and forget your network. Then select your network again and enable the advanced settings. Change from dhcp to static and then assign yourself a local IP. I have a Linksys router so I entered 192.168.1.8 . so I believe a netgear router would be 192.168.2.?? , the ?? or 8 being whatever is unused on your network. If you haven't already, enter your password and connect. I connected immediately after that. I understand this isn't really a "fix" because won't help you when trying to connect to networks that you can't assign your own IP, like say Starbucks or somewhere.. But hopefully this may point someone who knows more about this stuff in the right direction to actually fix whatever is off in the phone. Drivers maybe? Hope this helps!
Sent from my MB886 using xda premium
Thank you for the explanation I tried a dirty flash and that solves it for about 12 hours. I am getting faster at flashing and restoring everything and am now flashing a new Rom every couple of days so it's not that big of a deal I'll just take it as a sign I should try a new Rom I'm now running the unofficial aokp Rom and I'm liking it next time it happens I'll just try another. Thanks for all the help glad to know the issue isn't because I've done something wrong.
Sent from my MB886 using xda app-developers app
MrGrinch88 said:
I've been having this issue as well, again and again.. I've had about a 50/50 success rate with dirty flashing. Anyway, I believe the problem has something to do with the dhcp assigned ip addresses from the router. It's something on the phone side of it because changing dhcp settings,lease times etc., on the router have no effect. When you lose WiFi and it goes into that loop and won't connect, go into WiFi settings, and forget your network. Then select your network again and enable the advanced settings. Change from dhcp to static and then assign yourself a local IP. I have a Linksys router so I entered 192.168.1.8 . so I believe a netgear router would be 192.168.2.?? , the ?? or 8 being whatever is unused on your network. If you haven't already, enter your password and connect. I connected immediately after that. I understand this isn't really a "fix" because won't help you when trying to connect to networks that you can't assign your own IP, like say Starbucks or somewhere.. But hopefully this may point someone who knows more about this stuff in the right direction to actually fix whatever is off in the phone. Drivers maybe? Hope this helps!
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Sadly it doesn't work for clear wireless modems/routers.
Sent from my MB886 using xda premium
TTLayland said:
Sadly it doesn't work for clear wireless modems/routers.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
having same problem from same router
chiikko561 said:
having same problem from same router
Click to expand...
Click to collapse
Is there anyway to fix this issue yet?
@TTLayland said exactly what I'd say...static IP. I'll add the the Devs are working on updated WiFi drivers for the kernel. When that's ready hopefully that'll work for ya'll. I haven't had any WiFi issues for the past few weeks. Connected to my House, McD's, and the hospital.
Post the actual make & model of your router and I/we'll see what can be found for it.
Also, try setting the phone to 2.4 Ghz only...my old router was 2.4ghz and the auto setting would randomly kick me. New router broadcasts in both 5ghz and 2.4ghz, I connect to the 5ghz one and use auto without issue.
skeevydude said:
@TTLayland said exactly what I'd say...static IP. I'll add the the Devs are working on updated WiFi drivers for the kernel. When that's ready hopefully that'll work for ya'll. I haven't had any WiFi issues for the past few weeks. Connected to my House, McD's, and the hospital.
Post the actual make & model of your router and I/we'll see what can be found for it.
Also, try setting the phone to 2.4 Ghz only...my old router was 2.4ghz and the auto setting would randomly kick me. New router broadcasts in both 5ghz and 2.4ghz, I connect to the 5ghz one and use auto without issue.
Click to expand...
Click to collapse
a lot of the times I have to log into my router and turn the security completely off and then log on with my phone get a connection and then log back into my router turn the security back on and then I'm good to go.
Kinda like the flashing back to ICS to get a GPS lock to work on custom jb ROM's
Sent from my MB886 using xda premium
skeevydude said:
@TTLayland said exactly what I'd say...static IP. I'll add the the Devs are working on updated WiFi drivers for the kernel. When that's ready hopefully that'll work for ya'll. I haven't had any WiFi issues for the past few weeks. Connected to my House, McD's, and the hospital.
Post the actual make & model of your router and I/we'll see what can be found for it.
Also, try setting the phone to 2.4 Ghz only...my old router was 2.4ghz and the auto setting would randomly kick me. New router broadcasts in both 5ghz and 2.4ghz, I connect to the 5ghz one and use auto without issue.
Click to expand...
Click to collapse
Ok, I didn't realize Devs were working on it. I have statics set for my home, but being a Network Admin I travel to many different networks and because of the way our network transverses settinig an ip is not an option as the same SSID is used for about 95 different sites. So DHCP is a must.
I just thought it was strange that the Carbon rom I am using was working for about 2 weeks correctly then stopped connecting, sometimes a reboot will get it to connect.
Thanks.
I wish it would work I just gave up on wifi on ahd if using custom rom
Sent from my MB860 using xda app-developers app
LeGenDz R3DeaDz said:
For me It is doing this on stock sometime.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
*shivers* I remember that.... What I used to do is just reboot my phone.
Sent from my PACman Atrix HD using XDA Premium
So for about a week now, I've been having horrendous wifi issues on my device running CM 10.1 nightlies. My problem being that my phone will remain connected to wifi but no actual connection is present. It's very sporadic and highly annoying. After the problem occcurs, it still says i am connected but i can't actually access the internet.. Temporarily disabling wifi and re enabling fixes it for a couple minutes then it happens again. I'm pretty sure it's not a hardware issue as i can use my school wifi for an entire day without disconnects or anything but i can't get mine to work. I've tried carbon rom, diff nightlies, clear data+ cache but nothing works. This also happened on an xperia running CM (my dads). Any solution??
juanacevedo said:
So for about a week now, I've been having horrendous wifi issues on my device running CM 10.1 nightlies. My problem being that my phone will remain connected to wifi but no actual connection is present. It's very sporadic and highly annoying. After the problem occcurs, it still says i am connected but i can't actually access the internet.. Temporarily disabling wifi and re enabling fixes it for a couple minutes then it happens again. I'm pretty sure it's not a hardware issue as i can use my school wifi for an entire day without disconnects or anything but i can't get mine to work. I've tried carbon rom, diff nightlies, clear data+ cache but nothing works. This also happened on an xperia running CM (my dads). Any solution??
Click to expand...
Click to collapse
So the issue is on the router side, do you have a dual band router? if so make sure 5ghz is up and running. If you have a single band router thats capable of 5ghz, make sure all you wireless devices are capable of 5ghz freqency and if so switch it over.
Also Ive fixed this/ or similar issues on networks by disabling QoS in the router settings, id recommend disabling it and see if it helps
JoinTheRealms said:
So the issue is on the router side, do you have a dual band router? if so make sure 5ghz is up and running. If you have a single band router thats capable of 5ghz, make sure all you wireless devices are capable of 5ghz freqency and if so switch it over.
Also Ive fixed this/ or similar issues on networks by disabling QoS in the router settings, id recommend disabling it and see if it helps
Click to expand...
Click to collapse
The strange thing is I haven't changed any router settings at all and before last week I've had absolutely no issues with wifi. Now it seems I can't keep a connection for more than a couple minutes max. Also, sometimes (not always) I'll try connecting to a different router or access point and it'll connect and the next second it'll instantly disconnect. I'll try your suggestion and hope it works
Sent from my LG-P880 using xda app-developers app
Didn't work. Anyone else?
Sent from my LG-P880 using xda app-developers app
juanacevedo said:
Didn't work. Anyone else?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Just restarting the device works for me, using eternity project kernel stock version, I don't know for CM though, try installing latest nightly and install a custom kernel, most of them are better than stock CM kernel
ottomanhero said:
Just restarting the device works for me, using eternity project kernel stock version, I don't know for CM though, try installing latest nightly and install a custom kernel, most of them are better than stock CM kernel
Click to expand...
Click to collapse
The problem went away after a week. Weird issue with the router or something.
Sent from my LG-P880 using xda app-developers app