Related
hi
last night as usual i turned off my puter left the USB charger hooked up to my 8125 and then turned off my phone. (same process every night) this morning i came in to boot up the puter and turn on the phone, i noticed that the orange "Charging" light was NOT on on the phone. i tried to turn it on and NOTHING!!! i unplugged the USB cable still wont turn on, plugged the phone into the wall (AC) charger this time the orange light came on but the phone still will not come on. it is completely DEAD!!!! just to try something a little different i changed the USB port the cable was plugged into and tried to plug the phone into it again, nothing happend (no charge light, etc) went back to the AC charger and now it wont give the charge light with that charger either HELLP!!!!!!!!!!!!!!!! i am running the 2.17 ROM with very few programs & plugins and the phone has been ROCK solid maybe a few freezes here and there but nothing to even concern me. phone was working perfect last night 10 ,minutes before i turned it off. at the very least i would like to hard reset it to get my personal info off it before the cingular exchange, but i would feel more comfortable dowwngrading the ROM before the exchange as well. if anybody has any suggestions i am ALL ears.
thanks in advance
Take a deep breath.
Now go get your original charger that came with your 8125 plug it in.
You might to try and hit the soft reset as well.
This is a known problem with the wizard family. If worse comes to worse youw will have to get a new battery.
Breath INNNNNNN breath OUTTTTTT
OK thanks for the reply. so just to be clear you are saying this is a battery issue??? i have tried the soft reset button but nothing happens. the phone is completely dead. how can i verify if it is the battery? the phone will not turn on without a battery?? any help is appreciated
thanks again
You will have to plug your phone into the original AC Charger that came with it for a little bit.
The phone (and even the charge led) won't work until there is a minimal charge to the battery.
I had this happen and simply freaked out for about 10 minutes. Man was I happy once that little LED lit up again!
i had my wizard (8125) battery die on me suddenly. but i let it charge until the light came on, then finally let me power the damned thing on. it only had 2% battery left.
thanks again. very strange it has been plugged in all day with no signs of life. all of a sudden i pressed the ON/OFF one more time and it turned on just like it is supposed to, i am going to leave it on the charger all night but i am a little gun shy on whether to keep it or take the replacement from cingular on monday??? i would like to know why this happened so i can avoid it again in the future.
Some chargers are not up to spec. They may provide enough juice so that the phone says it is getting power but the battery does not charge right.
I have my stock wall charger by my bed and each night it goes on that overnight. Just to be safe
Master K said:
Some chargers are not up to spec. They may provide enough juice so that the phone says it is getting power but the battery does not charge right.
I have my stock wall charger by my bed and each night it goes on that overnight. Just to be safe
Click to expand...
Click to collapse
I do the same and have not had a single problem since I started the "Overnight Conditioning".
I used to use a RAZR Moto charger but it is underpowered (only 500mAh).
If you are going to use an off branded charger it has to be a good one and provide 1000mAh. Costs more but worth the investment. I found some nice portable USB Ports (one for the Car and one or AC) that have never failed me and since they are basically just a powered USB port that pushes upto 1000mAh I can use and compatable USB Cable!
So I upgraded to the latest mr clean rom and did some tweaks with the registry Wizard. I was playing around with it for a while and turned it off to charge overnight. I wake up and try and turn it on and nothing. I've tried soft reset, and hard reset and it doesn't turn on or do anything. When I plug in my charger the light on my phone doesn't even come on. PLEASE HELP. WHAT CAN I DO!!!.
dew1989 said:
So I upgraded to the latest mr clean rom and did some tweaks with the registry Wizard. I was playing around with it for a while and turned it off to charge overnight. I wake up and try and turn it on and nothing. I've tried soft reset, and hard reset and it doesn't turn on or do anything. When I plug in my charger the light on my phone doesn't even come on. PLEASE HELP. WHAT CAN I DO!!!.
Click to expand...
Click to collapse
It seems that you bricked you phone mate. I think that you installed MrClean rom in a G4 phone so you irrimediably f*cked up the bootloader (IPL and SPL). Many users have reported that their phones were able to boot (and behaved normally) immediatly after the flashing but were dead after they turned them off for the first time, this is what happened to you.
Only thing you can try is going to bootloader mode (but i think it won't work since you messed the bootloader) and then flash a new rom. To do this, press and keep pressed both the keys on the right side and then insert a pin in the reset hole briefly. If the phone goes to the tri-colors screen then you're safe, if not continue reading.
If your warranty perior is not yet over then you can have a new phone for free (DON'T tell them that you flashed an experimental rom!!! Tell only that it went off suddenly or that you were installing an official rom!).
Service centre can repair your device (i suppose they've some method to reflash the bootloader) but i don't know how much they'll ask you.
Try asking other users on this forum. Sorry!
bye
...did you ry to recharge it with the ----ORIGINAL 1A CHARGER----? looks stupid, but i resuscitated mine just before throwing it in the bin. if it works, i will explain you the rest....
yup, I tried charging it with the home charger and still nothing. My battery reads at 3v and it's supposed to be 3.8 so it's not out of juice, but maybe it's just dead?
...you can try with just a normal 9 VDC battery, in order to boost up the voltage, to connect it for a few seconds to the ppc battery till you reach the 3.8 VDC and see if it's working...
Ok, i did that...and amazingly it turned on so I pluged it into the charger right away. Windows booted and about 20sec later the device turned off and won't charge again. So i tried again and the same thing happened. Do I need a new battery? TIA
dew1989 said:
Ok, i did that...and amazingly it turned on so I pluged it into the charger right away. Windows booted and about 20sec later the device turned off and won't charge again. So i tried again and the same thing happened. Do I need a new battery? TIA
Click to expand...
Click to collapse
This is waht you need:
http://www.thetravelinsider.info/phones/cellphonerecharger.htm
This charger is somehow wired weird... it charges the battery AND feeds juice to the phone at the same time (believe it or not, regular chargers and USB cables do not engage until the OS is loaded), allowing you to turn the phone on and in a few minutes plug it into the regular charger to continue charging. Just make sure you get the RAZR tip.
It has saved my ass more than once.
I fixed it , What I did was zap the battery with a 9v battery in 3 sec intervals, I did this about 5 times, then I pluged my phone into the charger and turned it on, the 9v gave it enough juice to boot up and the usb took over from there. So to everyone out there who is having this same problem, try this but don't over zap, check your battery with a multimeter.
im having the same problem----my MDA went dead last night because i forgot to charge the battery and then i went to plug it in the charger but the phone doesnt turn on no more...the light doesnt turn on like if it would be charging and i left it overnight and it still doesnt work..... do yall think that its the battery or is the phone just messed up and cant use it nomore????
Last time I had my battery completely drained, it wouldn't charge from laptop via USB. I read something about how the device's "smart-charging" function itself needs a bit of power to start-up...
but anyways, I couldn't charge the battery through the phone (software charging) - what I had to do was to take a USB cable, cut out one end, identify the +/- (red/black) wires, and charge them directly to the battery's two poles (metal plates). It took about 10-20 seconds of charging until I had enough power in the battery to place it back in the phone, start WM5 and charge it thru the phone.
It would have been much easier if you have a battery charger.
I had my phone connected to the computer through the usb cable, and I just left it connected for a week and it was completely dead and could not be turned on. I don't know how it drained the battery (probally by leaving the wifi on, but the computer was in use all the time). Anyway, thanks to this thread, I used the ac charger and it turned on.
Keywords: t-mobile tmobile mda phone won't don't turn on
phone down
thanks for infos
I'm going to give this a go; a Crossbow ROM flash went horribly wrong last night and in my attempts to repair it (I also must have flashed at least 9 times) the phone went dead. It won't charge either, but battery voltage is 3.7 volts, and I'm sat here wishing it was 3
Will get back to you all!
To update: no... it didn't work! I hooked the battery up to a computer power supply (nearest thing to hand) on 5v and 12v and the voltage increased to about 3.81V... I guess the battery is not the problem with my phone, though the symptoms were the same :-(
Any buttons I can press (i.e. like the voice command button for bootloader) to wake the damned thing up? It's probably fried.
Suggestion
CrArc said:
To update: no... it didn't work! I hooked the battery up to a computer power supply (nearest thing to hand) on 5v and 12v and the voltage increased to about 3.81V... I guess the battery is not the problem with my phone, though the symptoms were the same :-(
Any buttons I can press (i.e. like the voice command button for bootloader) to wake the damned thing up? It's probably fried.
Click to expand...
Click to collapse
My phone has a hardware problem with the on / off button (doesn´t work at all), at the beggining I thought it was a software problem and I tried all sort of tricks, then I gave up and recognized that was a hardware issue and I found 2 ways to turn the phone on 1) When is totally off (This happens when I have to remove the battery to change SIM card) I connect to the USB cable to my PC or to the car or wall charger and I make a soft reset. 2) When I see the phone signal led blinking I remove the memory card and wakes the phone up (not a good idea since I know that the card is going to get damaged sooner or later).
I just got a G3 wizard from a friend a couple days ago. On Thursday I upgraded it to XDA Mobile 6 and left it on the 2.25.11 (I think) T-Mobile Radio that the T-Mobile 2.26 firmware flash put on it. I used it all day on Friday and then I held the power button and shut the phone completely off for 25 hours, but left it plugged in to a usb to 110V AC adapter that came with my Dell Axim X50V. On Saturday night I went to turn it on and it would not come on no matter what I tried. I found this thread and checked the voltage on the battery directly with a multimeter, 3.13V. I cut the head off a usb cable and then held the black and red wires to the positive and negative terminals on the battery for 2 minutes with the head plugged into a front USB port on my PC. The multimeter then read 3.7V. I put it back into the MDA and it turned on, booted and informed me that the battery was completely drained. I plugged it into the USB to AC charger and it read 10% battery on BatteryStatus. I have left it to charge and it is currently at 60%.
I guess the lesson here is to not totally shut the phone off and let it sit, or the battery won't charge, even plugged into my charger. I guess the OS needs to be running in suspend mode for the charging circuit to run. I know I won't turn it all the way off ever again unless I have my little plug thing and my laptop with me.
(old) Nokia phones have a state called "Acting dead" (from service manuals) which takes place when phone is turned off and battery inserted. It means that the energy is flowing around the board so that the responsible hardware keeps waiting for a 'HIGH' signal ordering to turn ON the phone.
When batteries go bellow the 2.x volts they stop being charged by the phones. This is why i protect the battery terminals with tape when the phone is stored for some time and the reason why a lot of people thinks the phones are broken when not used for months. I usually use the 'freezer trick' where i leave the batteries inside the freezer all night and charge them next day.
just 2 cents...
My Wizard XDA got discharged over the weekend and wouldn't start up - after 12 hours on USB it still wouldn't start.
The charge tips saved my bacon - I modified a USB cable as per the instructions above, and used it to charge up the XDA battery - it only needed five seconds and the phone now boots!
Thanks All, great information!
My 2 cents...
If you're going to try the same, connect red usb to the +ve terminal of your battery and black USB to the -ve terminal of the battery. I'd suggest having a voltmeter to hand to check battery and supply voltage.
Disclaimer - the ablve worked for me, but I'm not responsible for anyone damaging themselves, their PC,their phone or anything else by using the above info!
BUMP! thought my phone was dead, hacked a USB cable and i'm back in business!!!!
TYTN II won't turn on
i left it plugged in all day and when i tried to turn it on it didn't respond. i have a second battery that was fully charged and that didn't work either. i tried a hard reset with it unplugged and with it plugged into the charger. nothing works. i'm on the standard at&t rom with lots of programs. i got it unlocked so i can't go to at&t.
I posted this question before, but no one answered. But this problem drives me crazy!
My Kaiser turned off when the battery was running out.
When I connect wall power to charge it, the orange LED indicates it was charging, but just few seconds later it automatically boot, and the orange LED was off.
The problem is, it can't boot into OS due to low battery(it only shows "Smart Mobility", but can't even enter bootloader mode) And only if it boots into OS successfully, it can be charged.
Anyone met this problem on any other devices before?
How can I stop auto boot when charging?
What can I do?
That must be something specific to the rom on yours... mine does not automatically boot when when power is applied (assuming it is off, not just in sleep mode), and it charges fine when powered off.
dscline said:
That must be something specific to the rom on yours... mine does not automatically boot when when power is applied (assuming it is off, not just in sleep mode), and it charges fine when powered off.
Click to expand...
Click to collapse
Thanks
I use the ROM from this forum
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
What is yours?
I'm just using the stock AT&T Tilt rom.
Here's the fix!
Yes, I've had the same problem a few times on my Vario (Wizard). Very annoying.
Here's what to do:
- Take a mini-usb cable (the one you use for sync and charging from a PC) and cut off the mini-USB connector
- Strip the wires
- Take the battery out of your TyTN
- Carefully connect the ground wire (black) with the ground connector (-) on the battery. Fix it with clear tape.
- Now do the same with the (+) (red wire).
- Attach the USB cable to a running PC and let the battery charge for about an hour. After that, put it back in your phone, you'll be able to boot it up and charge it the regular way.
Yes, it costs you a cable, but it solves the problem.
dscline said:
That must be something specific to the rom on yours... mine does not automatically boot when when power is applied (assuming it is off, not just in sleep mode), and it charges fine when powered off.
Click to expand...
Click to collapse
I think you misunderstood. The problem is that the phone only charges when the OS has loaded completely. So if you really run your battery out completely and there is not enough power in your battery to boot up the phone (read: it turns off again before the boot has completed) you won't be able to charge it the regular way. SOMETIMES a heavier charger (2A) does seem to be able to charge the battery even with the OS shut down, but most of the times it won't work anymore... see below for fix.
SteRo said:
I think you misunderstood. The problem is that the phone only charges when the OS has loaded completely.
Click to expand...
Click to collapse
That's not how I read the original post:
When I connect wall power to charge it, the orange LED indicates it was charging, but just few seconds later it automatically boot, and the orange LED was off.
Click to expand...
Click to collapse
Based on this, it sounds like it is starting to charge without the phone booted (orange LED on), but for some reason it then automatically boots up, then crashes because there's not enough power(??)
But if the problem IS that the phone only charges when the OS has loaded, that is also not how my phone operates. In fact, that even goes against the manual, which tells you to plug the phone in (without turning on the phone) and let it charge fully for the initial charge before turning on the phone and allowing it to boot.
Sorry if I misunderstand, but neither way is how my phone operates... it can charge without the OS loaded, and the phone does not automatically boot once power is applied.
Not sure I fully understand what's going on here but, I am wondering if the power on/off button is stuck in (i.e the micro-switch is clicked in and not releasing). I cannot think of any other reason the device would turn on when connecting the charger if the device is powered completely off. ( Except perhaps shorted connections in the Usb port)
Mike
To SteRo:
Thx a lot for the solution, I tried, but still doesn't work.(I charge it more than 2 hours, and still can't boot into OS)
To mikechannon:
yes, it happened. :-( the power on/off button is NOT stucked. And the device is powered off completely.
To All:
Thx for your reply. What I mean is almost what dscline said:
It starts to charge without the phone booted (orange LED on), but for some reason it then automatically boots up(around 15 sec after I plugin power), meanwhile orange LED is off. But it can't load into OS, just re-boot again and again because there's no enough battery. That makes it's impossible to charge, 'coz it's only charged when the OS has loaded completely.
Anyway, I called customer service to ask them replace the battery. I may try to use different ROM and see what will happen. I'll post the result here.
It's also possible that it has nothing to do with the battery or charging at all. I just checked mine, and the charging indicator is lit with the unit off, but it does go out for a bit during the boot processes, then comes back on again. So what you're seeing with the charging light is normal. It may simply be that there's something corrupted, or some other failure with the device, that is causing it to not boot properly, and get stuck in a reboot loop. If so, it will probably do the same thing with a completely charged battery. You may have just been assuming that it was related to a low charge.
That's what I'm worry about,, Coz I can't boot it by SteRo's solution.
okay... they say trouble comes in three's...
Yesterday I flew to Asia, 20-hours with a full charge. No suprises during the trip. Checked email from Narita during the layover, no prob. But after I arrived in Taipei I received the low battery warning. Plugged in my usb-to-usb (notebook to kaiser) cable and "no charge light"!
This morning I plugged it into a ac battery charger and waited for >10 minutes, still no charge light.
Now, at the risk of a battery, I'm attempting to charge the battery removed from the kaiser using the previous mentioned method. In an hour I'll test it.
This afternoon I'll pick up a new battery charger and spare battery.
In 14-months with my trusty TyTN (cht9000) I never once had a problem like this... I'm a little bummed right now...
[update]
okay -- battery is okay and can be charged externally (using the two wire method or an external battery charger). BUT... the device still won't take a charge using either a direct AC adapter or a USB cord. This was also retested after performing a hard-reset. Not a good sign folks.
The charger works (connected to a Trinity), so it's not the problem. They battery works (charged to 45% after 45-minutes connected to an external battery charger). The HTC OS after a clean hard-reset used to work but now doesn't, so it's unlikely it's software related.
I've made no other modifications to the bootloader or SSPL... everything is original stock. Wish I had my TyTN with me right about now...
Sounds like something I had on my previous TyTN:
The power connector was a bit flaky on my charger at home. So when I'd hookup the powerlead it would charge to 10 secs or so and then no longer charge. I had to put some pressure on the connector to have it continue to charge. So I put a ballpen on the powerlead, just under the phone, when charging.
It's a long shot - hope of use. When you've connected the phone to power, and the orange light goes off, try wiggeling the connector a bit - see if that helps.
Hope of use.
Re
OK,
I've got excactly the same problems... I dont want to make you illusions, but you cant solve it and you need to send it back for repair. Your usb connecter on your tytn is broken...
first i will tell my story...
My tytn did excactly the same, shows the led, powers on automatically (normally it don't do that, so it;s not a rom issue) and then powered down in the smart mobility screen. I tried 4 chargers, and 2 battery's. with a full battery it will power on and load windows, but unable to charge. with the empty battery it will power down in the smart mobility screen. soft reset, hard reset, it won't work.
You can check if it's the same problem, by attaching it to your usb on your computer and call up the bootscreen by pressing the camera button and stick your stylus in the soft reset hole. If it comes up with serial instead of usb, then your device usb connector is broken.
BUT, you can charge your battery in a very strange way i figured out. since i am on a buisness trip i need my phone and don't send it back!!!!!
ok, this is what you have to do, plug in the powercable, call the hard reset screen BUT DON'T APPLY!!!! you will notice it will not power down, so just leave it on this screen for a night with the cable connected. you don't see the charging light, but actually it is charging. for me this temporarely solution works fine... but when i'm back in about seven weeks i send it in for repair.
Hope this will help you!
Swiftgs:
Many thanks for your insight -- you are correct, in bootloader mode the Serial shows instead of USB. I just purchased a spare battery (1100mAh, made in Taiwan) and battery charger for US$17. It'll get me through my business trip, but this is disappointing. As I mentioned in my earlier post, I used a TyTN for 14-months (July 2006 to Sept 2007) as my primary phone, recharging it daily via the USB connector and on a desk charger in my office. I can only conclude that if the USB is physically damaged (not evident visually), then it is not as robust as the USB port used in the original TyTN. The strangest part of all is it worked perfectly until the battery level fell below 10%...
FWIW: I purchased the phone through R&D Marketing. Ron Webber quickly responded to my note and gave me a contact at HTC America. I'll follow-up
after I return and report my experience.
Cheers
well, thanks for all of your replies/infomation.
I tried evey possible methods mentioned above, unfortunatelly none of them works :-(
and the most depressed thing is I filnally get a new battery, but it still doesn't work!
So I sent it back to repair, cross figure...
It works
I would like to thanx 2 SteRo for his advice. I am using Qtek 9000 and had the same problem. Battery was empty, and I tried many times to turn on my PPC, but without success. All the time when red light appeared after 10-15 sec display become black and tried to restart from boot again, and it's happened many times. Finally I thought that I just can trow my Qtek, but seeing your recommendation decided to try. I took USB cable cut it and strap the wires. Connecting red on (+) and black on (-) after 1 hour charging I was able to start my PPC, to recharge battery by 100% and it is working now OK. I must check duration of the battery tomorrow, because reason why I discharged battery was automatic turn off of my PPC when it was on around 45-50% battery capacity. Tomorrow I will check how it's working when I recharge battery again.
Dear SteRo you are the king.
hi, new member here.
bought my tilt on 10/4/07. has been flawless since that time.
used the nav quite a bit during a road trip, used a cig lighter usb charger.
got home and my battery was at roughly 40%.
put it on the charger at night went to sleep. in morning disconnected it at 8 am. shortly after i arrived at work i got the critical battery low chime. checked and it had like 7% battery life.
figured i didnt plug it in right, or it got knocked loose some how and didnt get charged.
put it in flight mode to minimize battery usage. left work at 2 30 pm (4% battery life) and put it on the car charger. got home and put it on the HTC supplied wall charger. light turned amber, so i assumed it was charging.
checked an hour later and turned phone on, it said 0%, and immediately died. left it on the charger for a few hours and the light was still amber, turned it back on and again 0% and phone immediately died and did a soft reset on its own. i turned the phone off and left it on the ac charger, took out the sim card and put it in an old blackberry to use while the battery was charging.
its been on the ac wall charger for the last several hours, i checked and the phone is totally dead, cannot turn it on, and the LED at the top is now RED.
what is the problem here? why wont this thing charge?
thanks in advance, i have alot of critical info on this device and any help would be greatly appreciated.
i cannot hard reset because i cannot turn the flippign thing on....
Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.
I'd try a different charger first. If that makes no difference then a different battery. If that still does not make any difference then time to exchange it.
Lidberg said:
Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.
Click to expand...
Click to collapse
connected to either the computer or the wall charger, the LED thats normally amber when charging, and green when charged, remains red.
I had something very similar happen to my wizard.
And as weird as it sounds, the only fix was to charge the battery in a friends wizard on his charger. I'd check the battery if possible.
Could be the battery. Know any place or anyone that will let you try a charged battery? If not, you might have to go in to an AT&T store.
i think i got it working. did some reading/browsing...
took a usb wire and cut the mini usb head off. dissected it and found the the red and black charging wires. took out the battery and held the leads to teh battery while the other end was plugged into a USB/AC adapter wall charger from a old blackberry. after manually charging the battery for several minutes, i put the battery back in the phone and the phone started up. now it seems to be charging off the wall charger and the led is now amber from red.
thanks for all your help/suggestions.
well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.
tiltyoself said:
well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.
Click to expand...
Click to collapse
Repeat this proceedure but this time do not turn the phone on, just plug it in to the wall charger once you have zapped the battery again.
Turning your phone on probably just caused the already recovering battery to die whiles it is trying to take on a charge.
It is mentioned quite a lot on the boards that Li-Ion Batteries do not like being over disscharged and there is usually a little protection circuit in the battery to provent complete disscharging although this circuit may be on board the phone. Completely disscharging a Li-Ion cell will kill it stone dead and it will need replacing.
When you took the battery out and so called jump started it with your flying leads, this possibly reset the little protection circuit in the battery so it can now take on a charge. I feel that once you turned on the phone, this was to much for the already depleted cell to take and possibly re-tripped its inbuilt circuit.
If you do manage to recover you cell, in future it is good practice not to let the battery go below about 25%. Li-ion cells are generally happy being top off regularly.
I hope this helps buddy
Do let us know!
Cheers
C.
thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...
That Sucks! I hope they'll give you a new battery.
tiltyoself said:
thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...
Click to expand...
Click to collapse
I had exactly the same problem with my battery. It came on though after a day. Although the battery life after this happened went down to 10hrs max on standby. I sent the phone back and got a new one and now all is fine.
This is a problem that affects almost all makes of phone. There are three (main) causes of the problem:
1.
The battery charge drops too low to allow the charging circuit to recognise a battery is even in place (red no charge light stays lit)
possible solution:
http://forum.xda-developers.com/show...22&postcount=6
(in the end very similar in the end to the USB wire used in post above)
2.
A faulty battery (but if you can charge it using a cut usb cable or using a couple of AA batteries this may not be a faulty battery.
3.
A faulty charger OR a charger not delivering 5v at 1000mA as the OEM one does. Many chargers that are used for other phones or generic chargers only deliver 500mA. This is not enough when your battery drops very low. (these chargers are OK for occasional use but I do not advise using them regularly particularly if the no-charge syndrome has shown itself)
4.
A faulty USB connection on the phone. I have now seen a couple of reports where the fine wire connections in the phones USB port have become bent out of place.
Number 4 above is at least possible for the OP as it seems the battery will charge using a cut USB cable but not when either the PC USB cable or mains charger is connected. A USB port on the phone with a a bent internal contact would explain what's happening.
A previous poster was able with a needle or similar to bend the contact back into place.
Mike
i had the same problem with my phone.
put it in the charger overnight and woke up in the morning and couldnt turn on the phone with blinking red light. I don't know if my battery was over-drained though. I went to AT&T and was playing around with their charger and new battery and somehow the so-called dead battery started working again. They changed the SIM card on my phone there and then i haven't been able to use the phone since. I've changed the network to GSM instead of Auto setting under Phone Options which allows us to make calls; but now I can't connect to 3G network.
Charging thru mini usb
My phone started to exhibit similar problems...plugged in but no charging of the battery. I finally realized that my mini usb connection on the phone has been compromised (bent, distorted=not functioning properly) Now I have to prop the mini usb connection up at a slight angle to engage the charge. I think the plastic/metallic connector on the phone is somewhat fragile ...I had similar issues with my hermes.
called customer support.
they are sending me a new phone and battery.
how do i know its not a refurbished one? any clues?
before u send out your defect phone, have u check if your phone's mini-USB connector has bent or misaligned pins?
yeah all the connectors visually are fine.
My battery died last night and i charged the phone up and now the phone will not turn on anymore. Anyone have any ideas cause i'm completely out of them???
have you tried takin git out an putting in the phone again?
Yup. I dunno what is going on. I was using sony's cable to charge the thing and the power button was lit up red and now i switched to a different cable and the power button doesn't turn red anymore but the indicator lights are flashing like it doesn't have enough power to start. It may just be dead and sony's cable just stopped working and never charged the thing
Nope that isn't it... it just won't power on for some reason. i hope someone has an idea as to what is going on because i don't
I had a similar problem and had to leave it plugged in for at least 10 mins before the LEDs indicated it was charging.
THANK THE LORD THANK THE LORD. I was right. The crap cable sony uses just didn't charge the phone at all. Now that i switched i was able to turn the phone on again.
Try hard reseting the device while it is powered, might do something if its a software issue.
battery stone dead~won't recharge
I have the same problem. I don't believe ti has anything to do with the cable. The first time it suddenly came to life after a day or two fo being dead, but this time so far it is still in a coma. It did briefly awaken when connected to the pc, but it kept blacking out, and now it's completely gone again.
Could it be that it is not set to power off until the battery is completely stone dead, and therefore it won't recharge?
I think you are absolutely right. I don't believe it allows you to charge it until it is turned on. So try and plug it for like 15mins and try and power it on. Let us know if it works
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
Came accross this also in the Kaiser forums - think it has something to do with the battery being absolutely drained, so much that there isn't enough power to switch the current to the battery again.
Never happened to me, so never quite figured it out. But the Kaiser forum had a lot of discussion (and solutions I think) on this. (Xperia has HTC involvement..or so it's rumoured).
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
yep... I have had that happened to my blackjack 2 a couple times too. everytime I had to connect it to the charger for like 10 15mins before it can turn on again... plugging it to the pc/hub never work.... also happened once to my iphone as well
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
There is defiantly something extra going on with the Xperia. While other devices I’ve seen fully drained refuse to start charging again from a USB to PC cable and even some power outlet charges. My Xperia is also doing as Nipperos. With an almost full charge I plugged it into the USB to PC cable and the icon went to the little plug and when I clicked on it the status said that it is was charging but when I got ready to leave for the day it had drained down one red bar. It was also very warm. With this, the $800 price tag and the random crashing made worse by the incredibly poor location of the reset button and made even worse by the incredibly poor design of the battery cover. Really, what is the proper way to get the thing off without breaking it? I’m fighting the urge to return it.
Any word on a new firmware?
Nippero said:
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
Click to expand...
Click to collapse
I've noticed this too... My phone will be on full charge, i connect it to my PC to install a software, then i check one bar's gone... it drains more than it charges...
my x1 did this today. my buddy has a verizon htc phone and let me use hus htc wall charger and it did the trick...
my x1 is a x1i so i dont know if the US. plugs or what dont agree with the phone. but out of 6 cables and chargers only 2 will charge the phone from a dead battery the other 4 would only charge after it was on.
so my best solution for you all is to find yourself a htc wall charger and let it charger for 20 mins before trying to turn it on.
and of course theres htc involvment on the x1. look in the windows folder. all drivers are HTCxxx.dll the comm manager is htc. theres a forum here the htc developers site. this isnt a site for samsungs and other makers. this is a site for htc devices. if it wasnt a htc device it wouldnt be here.
My experience
I had a similar experience while on a trip to Korea. I didn't foresee that a 200mA difference in the current output of a wall socket charger will cause me so much pain.
I had always been able to charge the X1 with my Jabra headset's wall socket charger, hence I brought it on my trip. Not being mindful of the ratings, it can only supply 500mA, which is different from the X1's charger, 700mA. I was using it happily on a bus, happily keeping it alive with a solar USB charger (till it ran out of juice too). A while later, playing with the GPS I noticed my battery power dropped to 20% (2 bar) so I pressed the power button to conserve energy.
Unknowingly, the battery kept draining and the next time I wanted to turn it on I couldn't. The top 2 LEDs gave me 3 red blinks. I thought, "ok, so I just go back to the hotel to charge it with my Jabra charger."
When I tried that, I noticed that the power button gave a constant red LED and the battery did not charge. Taking out the battery and putting it back, I noticed the power LED went off (which indicates it was going to charge) but came back out again. It never charged.
Back home, after using the supplied SE charger, the power LED went off and never came back. I tried to turn on the X1 after 15mins and it powered up, showing the usual charging LED cycles.
Lesson Learnt. Always use original accessories.
Same problem here....
I knew about problem charging totally dead battery with wall plug-in (from previous HTC). Totally dead battery was not possible to charge via USB (from PC). But I have bought xperia via ebay and didn't know the wall charger is not original SE charger... Hope to work with previous HTC charger
Tx for coming to the idea
Just happened to me :S
I had used it all day and Wifi was turned on so obviously battery was almost dead. To save battery I turned off the Xperia.
When I tried to turn it on again it wouldnt and so I connected it to the pc.
That didnt work out so I connected it to the standard charger but that also didnt work. Right now my Xperia X1 is lying unplugged on the table because someone said you should leave it unplugged for a couple of minutes.
Hopefully it will work, I only have had it for 3 days :´(
Also hope this doesnt happen everytime your battery is drained because that would be annoying as hell.
--Edit--
Ok so what I did was I removed the battery and plugged it back in. This worked and I managed to turn it on and right now its charging.
Though when I try to go to sleep mode it turns the display on again after about 3 seconds and does what I am guessing is a low battery beep (Sorry windowsmobile noob here) but then stops instantly, which is pretty stange.
ok anyone know a way to increase the power wattage from your pc to the usb device? (sounds dangerous i know), but there must be someone who has had a similar prob and was able to fix with a bit of tweaking....ill google and come back with any results
okay...i had similar problem today morning..it wudnt start.
so i left it charging for ten minutes...and now it has turned on finally.
i think the battery goes completely dead.