This flashable zip contains fixes for camera and microphone in CM 7.2 nightly builds...
[CAMERA FIX] fixes camera Exposures, instant video record (no delays), and gives the best image quality
[MIC FIX] fixes the audio routing so we can use you common favourite headphone and use built-in mic for calling, recording, voice-chat apps, etc..
Installation:
Download and flash with your favourite recovery...
* In case it doesn't flash correctly you can grab the libs from the zip and replace it manually and set the corresponding permissions but remember to reboot when you finish the replacement to avoid DSP Manager FC's...
All credits goes to Kiril "mik_os and Adfad666"
Special thanks to umangleekha & deniso17 for posting libs and updater-scripts...
--> Original Camera Fix thread
tested, not working on cm7.2 RC1
OMG, it really works!! Im using neko95 G-T-R 1.9 ROM, Hats off to you sir...
BTW, i've just copied libs and set permissions in rootexplorer
Finally --> [BUG] Headphones are always recognized as mic+headphones. Internal mic is then disabled thus making it impossible to answer calls on headphones with no mic.
WORKING!!!
WORKING 100% on C.M RC1 !!! And it has also improved the voice quality during calls immensely! Thank you 1000 times!!!
Tested on CM7.2 RC1 stock everything. Seem to do nothing, Sound recorder doesn't show any mic activity. Any special conditions that I should follow in order to flash this properly?
TimeWalker75a said:
Tested on CM7.2 RC1 stock everything. Seem to do nothing, Sound recorder doesn't show any mic activity. Any special conditions that I should follow in order to flash this properly?
Click to expand...
Click to collapse
Do not flash. Copy the files and then change the ownerships back to default. And this works only when you are on a call. It cannot be used to record in normal mode when headphones are on.
What's the source? did you just pull the libs from Mik's old ROM?
pradipsoman said:
Do not flash. Copy the files and then change the ownerships back to default. And this works only when you are on a call. It cannot be used to record in normal mode when headphones are on.
Click to expand...
Click to collapse
That's not really how this should be. At least the libs that Adam posted yesterday(?) are working fine with CM7 and even Sound recording works while having just the regulasr headphones in.
TimeWalker75a said:
That's not really how this should be. At least the libs that Adam posted yesterday(?) are working fine with CM7 and even Sound recording works while having just the regulasr headphones in.
Click to expand...
Click to collapse
Can you post a link to Adam's libs? And does it work with a non-default kernel?
EDIT> I tried Adam's libs Recording with headphones work. But while on call, the mic does not work...Maybe because, I am not using stock C.M kernel. I have to go back to TK's libs now.
pradipsoman said:
Can you post a link to Adam's libs? And does it work with a non-default kernel?
EDIT> I tried Adam's libs Recording with headphones work. But while on call, the mic does not work...Maybe because, I am not using stock C.M kernel. I have to go back to TK's libs now.
Click to expand...
Click to collapse
Seems that TK posted libs works as expected but not adam ones...
I fixed the installing script. Now it should set the right permissions. OP can add this to his post if he wants.
Works on LG Phoenix P505
Tested on LG P505 with SlimGen 1.3 and it workd great!
Thanks for the libss!
Really appreciate it
can somebody re-post the zip because attachment seems to have broken...
only 552 bytes are getting downloaded....
Tested in p500, function 10
Sent from my LG-P500 using XDA
Updated to Adams lastest fixed libs!!! (calls + recoding with headphones...)
All credits to Adam "adfad666" and Kiril "mik_os"
------------------------------------------------
Also added a flashable zip for camera & mic fixes
@credits to adfad666, umhangleekha and deniso17
Work fine with G-T-R TEST VERSION
Thanks for this.. will test.. got prob lems with CAmera using GTR ROm 4.5X..
Camera freezes while recording...and FC is there ....I think this is not the umagleekha version. It had good default exposure and there was no border in the preview...Which camera libs are these?? The exposure is dark and recording video does no work. A trial to press the button results in FC....
Microphone is fixed for ever...all work, recording (you can hear your voice in the headphones)....and while in a call....
Dev and Dudes,
Since Yesterday, My camera doesnt work anymore... I had the GTR ROm 4.5x that time,...
Tried everything to fix it, flashed kernels, reflashing ROMs nothing works..
Now, even my Nandbackup of a stable ROM is affected.. the CAmera doesnot work!
BTW, I tried this fix ang still doesnt work.. hope u guys have an answer..
pikas23 said:
Dev and Dudes,
Since Yesterday, My camera doesnt work anymore... I had the GTR ROm 4.5x that time,...
Tried everything to fix it, flashed kernels, reflashing ROMs nothing works..
Now, even my Nandbackup of a stable ROM is affected.. the CAmera doesnot work!
BTW, I tried this fix ang still doesnt work.. hope u guys have an answer..
Click to expand...
Click to collapse
Um he probably took the wrong camera fix, or did not set permisions on apk and libs right.
GO to my original thread with the camera fixes, and if you want brighter exposures flash my N2 libs fix, it should definately work, tested 100x on my own phone.
http://forum.xda-developers.com/showthread.php?t=1604205
Related
Hello all
Here I will share the rom cyanogenmod for our mobile phones.
This rom is based on the work of tickerguy, by modifying the frameworkbase to be run on our mobile phones.
Almost everything can be said to be working
And that is not running
-HDMI
-Fm Radio
How to flash rom
- Flash it with cwm recovery.
- Do not forget to make nandroid backup.
- Before the flash, do a full wipe of data.
- If you are coming from a previous CM7 build I strongly suggest formatting /system and wipe dalvik cache.
- Always do reflash gapps.
Recommended Gapps :
http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
Gapps with gtalk audio/video ability
http://www.multiupload.com/MYPOK7TFPF
Recovery:
I'm using clockworkmod recovery from tjstyle.
Credit
- Obviously many thanks to Cyanogenmod team.
- Tikerguy and ikarosdev that already provide source code on github, thank you very much
- Tjstyle, for new kernel source, recovery and which gives way first to our phone, to be run with a custom rom.
More info about this rom
http://androidforums.com/triumph-al...ph-tickerguy-edition-kernel-mine-10-30-a.html
FC'S on Market :
If you experience fc's on market
Change the phone's language from Hd (English) (the default) to English (United States)
go to setting -> Language & keyboard -> select language -> English (United States) or your local language.
Please note, I'm not responsible if rom will break your device !!
screenshot
Uploaded with ImageShack.us
Remember this is rom not included with APN setting, you need setting APN by yourself
Update Rom Download link
03-27 http://www.mediafire.com/?aqaqlz0k5n93094 ->thanks ardx for upload rom
03-21 http://www.4shared.com/zip/ujQ3-tMS/file.html?
31-12 http://minus.com/mWt471Kqt ( Unofficial Final Update ) thanks to yashwantsingh for mirorring
11-12 http://www.mediafire.com/?uvb3vy53rlbab67
28-12 http://www.mediafire.com/?1g571m18r3y8pm5
20-11 http://www.mediafire.com/?c1xbf0jbzlty5mv
11-11 http://www.mediafire.com/?545q50tvlvkhdh7
09-11 http://www.mediafire.com/?4q4iif9kk1u84hz
06-11 http://dl.dropbox.com/u/3514842/update-cm-7.1.0-FB0-6-11-KANG-signed.zip
CHANGELOG
Update Rom 27-3-2012
-Based on a new kernel 2.6.35.7 from tj_style
-Everyting works as like rom before.....only stock camera apk do not work, try third party camera such lgcamera, it will works fine.
Because this a new kernel base and require a new baseband too, before install this rom, install stock rom from sharp or from the latest andro-id rom
Then Install tj_style new recovery right here http://download.andro-id.net/index.php?dir=FIH-FB0/&file=FB0-0-416B-CWM5-recovery.img
-Added Overclock ability and I/O scheduler bfq
-Fixed promitixy sensor
-Fixed gps
-Build rom with latest cm repo
-Faster gps lock sattelites, here's for update link http://www.mediafire.com/?7oy4eeaiyec84ux
UPDATE ROM 22-3-2012
-Added a new kernel 2.6.35.7 from tj_style
-Everyting works as like rom before.....only stock camera apk do not work, try third party camera such lgcamera, it will works fine.
Because this a new kernel base and require a new baseband too, before install this rom, install stock rom from sharp or from the latest andro-id rom
Then Install tj_style new recovery right here http://download.andro-id.net/index.php?dir=FIH-FB0/&file=FB0-0-416B-CWM5-recovery.img.
After install this cm7 rom, don't forget install new kernel updates for fixed wake lock, right here http://www.mediafire.com/?415bo319741do1w
UPDATE ROM 31-12
-Add T9 dialer
-Added disable turn-off boot animation
-Added minimal ring style lockscreen
for kernel credit goes to Doomlord, many thanks to him.
-Added new kgsl driver, blazing fast graphics performance and maybe will support new HD games.
-Added more space in ram memory
Because this kernel still experimental maybe will contains some bugs , and need more test, I split this kernel from update rom
kernel link download
http://www.mediafire.com/?669f641ts055ma9
UPDATE ROM 11-12
-Revert libaudio from triumph, it seems much better solution for incoming call volume issue control
-Update kernel, for support two way recording call, credit goes to cyanogenmod and doomlord,
for call recording, you have to install CallRecorder app by skvalex, here's link for apk http://forum.xda-developers.com/attachment.php?attachmentid=577214&d=1303678677
-Gps Lock more faster
-various additional improvements and fixes from upstream cyanogenmod github
UPDATE ROM 28-11
-Added cpu power management features, credit goes to Doomlord and Napstar, many thanks to him
-Added many governors
-Added Overclock up to 1,4 Ghz
-Added VDD control for undervolt ability
-Added live wallpapers and sim toolkit
-Increasing in call volume
UPDATE ROM 20-11
-Add native wireless tethering, credit to stockwell and tjstyle
-various additional improvements and fixes from upstream cyanogenmod github.
Update rom 11-11
-Rebuild a new kernel from [email protected] forum, many thanks gan
-Fix sound button widget
-Changes board name to fb0
-Partially fix incoming call volume issue, by press down volume and up volume.
Because this update is different from other update. Before update, please do a full wipe and format system.
update rom 09-11
-Haptic feedback is working, many thanks tickerguy
update rom date 06/11
-Fix some bug at RIL radio
-Fix Gps
Just in case, if you prefer use standard kernel
http://www.multiupload.com/KE4O3XS3Y0
If you like my work....Just hit thanks button, thanks
edowar said:
Hello all
Here I will share the rom cyanogenmod for our mobile phones.
This rom is based on the work of tickerguy, by modifying the frameworkbase to be run on our mobile phones.
Almost everything can be said to be working
And that is not running is
-HDMI
-Fm Radio
How to flash rom
- Flash it with cwm recovery.
- Do not forget to make nandroid backup.
- Before the flash, do a full wipe of data.
Clockworkmod recovery that I'm using :
I'm using clockworkmod recovery from tjstyle.
This rom do not provide apn for your gsm carrier,
credit
-
- Tikerguy and ikarosdev that already provide source code on github, thank you very much
- Tjstyle, which gives way first to our phone, to be run with a custom rom.
More info about this rom
http://androidforums.com/triumph-al...ph-tickerguy-edition-kernel-mine-10-30-a.html
If you experience fc's on market
http://forum.xda-developers.com/showpost.php?p=16613486&postcount=1432
Please note, I'm not responsible if rom will break your device !!
screenshot
Uploaded with ImageShack.us
Link for the rom
http://db.tt/ep6HXAGz
If you like my work....Just hit thanks button, thanks
Click to expand...
Click to collapse
Downloading.!
Good go.....
one question pls
hi
the original site is from Triump forum i herd it was a CDMA phone
have u tried this does this work for our phone
haree said:
hi
the original site is from Triump forum i herd it was a CDMA phone
have u tried this does this work for our phone
Click to expand...
Click to collapse
Since same manufacture (fih), Our device is not very different with triumph, the different is only RIL radio.
Sent from my CSL-MI410 using Tapatalk
paarkhi said:
Good go.....
Click to expand...
Click to collapse
Working, configure APN manually. Market to be installed separately. Testing other apps...
anybody plz tell me how i use this file to update my phone... i only know about nbo files which are used for updating by using sut software... So plz tell me how i use this file to update my csl mi 410
Serecomputing said:
anybody plz tell me how i use this file to update my phone... i only know about nbo files which are used for updating by using sut software... So plz tell me how i use this file to update my csl mi 410
Click to expand...
Click to collapse
You have to update it through cwm(clockworkmod recovery). i hope you know about it, if dont then go to this link:- http://forum.xda-developers.com/showthread.php?t=1278027 here you will get full info about it.
is front camera & HD video playback working without lag & restarts in this version ??
also pls someone test if 3d games working..
everything is working flawlessly. both the cameras are working fine and so is HD movie. didn't test 3d games though because neither I do have 3d games collection nor I use to play them. though it is premature to comment, but I have a feeling that by far it is going to be best rom barring FM and HDMI. but none of the uc kernel meant for cm7 is working.. so can't do ocing or voltage hack
hey mi410 bro where did you find gapps and how did youconfigure your service provider
for gapps go to this link
http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
credits to cyanogen wiki
and for manually configuring ur provider
step 1
when on your home screen
press menu button > settings> wireless&networking (1st option)>network operators>access point
press menu for getting NEW /ADD
then enter the details
for your operator specific setting call up ur custormer service or search the internet
(i was using miui fw this time so i cant put the exact option titles )
Step 2
if you already put the google apps from recovey and you switch on your phone.
you will be taken directly to the Touch android Bot screen
in this screen just press Menu Button !! and from there you can do the settings try it and come back
have a great day.
installed gapps by googling but camera won't open says cannot connect to front camera going back to miui till a more concrete review comes along on whats working and whats not and cheers for the uploader thanks
preyesh1 said:
installed gapps by googling but camera won't open says cannot connect to front camera going back to miui till a more concrete review comes along on whats working and whats not and cheers for the uploader thanks
Click to expand...
Click to collapse
don't know why your camera is not working, for me both the front and back cameras are working perfectly. .. device model name is showing as Triumph, but that's not a problem... need kernel for overclocking and voltage hack...Napster, are you there?
same for me .. once you switch to front camera "camera not working" error pops up and thats it camera application wont work anymore.
another bug i noticed is the SOUND widget control on noticfication wont function only gives click sound. long press will take you to the main sound settings though
torch application not working.
anyways now flashing again ..this time from stock GB rom to CM7.1 and lets see
i wanted to ask the uploader if he kows how to prt roms for the triumph on our phone if yes it can be very cool as triumph has great custom roms can he share the method with us always felt why does tj port from galaxy ace where triumph is a better option
preyesh1 said:
i wanted to ask the uploader if he kows how to prt roms for the triumph on our phone if yes it can be very cool as triumph has great custom roms can he share the method with us always felt why does tj port from galaxy ace where triumph is a better option
Click to expand...
Click to collapse
you are total dumb..
tj_style uses ports from htc desire hd & s, galaxy ace has no hardware relation with our phone & thus ports are not possible..
truimph community devs uses ports by tj_style instead by changing radio baseband because n.american region uses a different set of telecom operator freq. & kernal because of capacitive buttons different order.
i also earlier thought this is a new port but this is the same build by tj_style with same bugs
the different thing is that firstly someone ports ports it to truimph then an another user ports the same builds to our phone.. its one & the same thing..
i'm complaining about this dev. as he tried it.. but we need only newer builds not the old ones..
like miui porting is ahead ATM in moto forum, so he should be porting it.. cm7 having the same status atm..
or should port any other roms that are not present for our phone but there in moto truimph forums..& he should edit system build.prop too for proper user agent device id changing to fih-fbo
nitindeck said:
you are total dumb..
tj_style uses ports from htc desire hd & s, galaxy ace has no hardware relation with our phone & thus ports are not possible..
truimph community devs uses ports by tj_style instead by changing radio baseband because n.american region uses a different set of telecom operator freq. & kernal because of capacitive buttons different order.
i also earlier thought this is a new port but this is the same build by tj_style with same bugs
the different thing is that firstly someone ports ports it to truimph then an another user ports the same builds to our phone.. its one & the same thing..
i'm complaining about this dev. as he tried it.. but we need only newer builds not the old ones..
like miui porting is ahead ATM in moto forum, so he should be porting it.. cm7 having the same status atm..
or should port any other roms that are not present for our phone but there in moto truimph forums..& he should edit system build.prop too for proper user agent device id changing to fih-fbo
Click to expand...
Click to collapse
Im not complaining, at least other people are getting in there and getting something accomplished. The more the merrier, as they say. I tried porting one and ended up with a non installable mess. More power to the OP. There should be no possessiveness of the roms. He gave credit to TJ so what is the beef.
Having said that my front cam takes upside down pics. Didn't TJ already solve that issue?
Sergekarol said:
Im not complaining, at least other people are getting in there and getting something accomplished. The more the merrier, as they say. I tried porting one and ended up with a non installable mess. More power to the OP. There should be no possessiveness of the roms. He gave credit to TJ so what is the beef.
Having said that my front cam takes upside down pics. Didn't TJ already solve that issue?
Click to expand...
Click to collapse
Camera inversion issue has already been solved by tj_style. I have built a kernel for miui release. I will upload it in few minutes.
And yes, I will try and provide nUC kernel support for this cm rom too. Just ramdisk swapping might do the trick, unless there are some major changes in kernel by dev.
PS. since I am again away from my home for some work, so this delay.
Sent from my CSL-MI410 using XDA App
zailer said:
same for me .. once you switch to front camera "camera not working" error pops up and thats it camera application wont work anymore.
another bug i noticed is the SOUND widget control on noticfication wont function only gives click sound. long press will take you to the main sound settings though
torch application not working.
anyways now flashing again ..this time from stock GB rom to CM7.1 and lets see
Click to expand...
Click to collapse
Maybe, you forget wipe data before install the rom. By the way front camera is works flawlessly with my phone
Hi folks, I just update the rom today, this update fix some bug at ril radio and gps
this rom ported frm this:
http://forum.xda-developers.com/showthread.php?t=1538588
u can read details there, i think the real dev of the rom is xuguoshu (correct me if wrong), credit to him or whatever name he has, i will refer back to fengbao.com to confirm his name. post has been translated by pikachukaki, it has been said as a perfect release.
download my ported rom here:
http://db.tt/dqdfFXCg
download modified austrie sd kernel patch here (i modified wifi module to suit with edowar wifi patch):
http://db.tt/ZCFLBhwM
download google patch here:
http://www.4shared.com/zip/zTcyKVYN/GSM.html
steps of installation:
1. go to cwm
2. do a nandroid backup (if applicable)
3. do a full wipe (unless u already use miui gb rom - if so, just wipe dalvik & cache)
4. flash the rom
5. flash sd kernel patch (huawei roms came with unique updater script, so its mandatory for u to flash kernel separately)
6. flash google patch
7. reboot system
WARNING: DONT REBOOT YR PHONE UNTIL U FINISH FLASHING EVERYTHING
credit also to austrie for the kernel
credit also to edowar for his wifi patch
i add spirit fm radio with its library file in this rom, u can test. my country is not in the preset list.
i/o scheduler (deadline) is seems like not really compatible for our device, some apps function, such as selecting certain themes may reboot yr phone, to stabilize it, just go to x5 setting (included) & change to cfq, so far its working great!
ALL MAJOR FUNCTIONS ARE WORKING.
NO IN-CALL VOLUME ISSUE.
ENJOYYYYY!!!
if u like my work & willing to donate, my paypal ac is at [email protected]
Sent from my u9000 using xda premium
Great work man. You are now the Man of Rom porting
bro, the ported rom link and the austrie sd kernel link are same link?
bigostoo said:
bro, the ported rom link and the austrie sd kernel link are same link?
Click to expand...
Click to collapse
sorry & link updated, tq!
Sent from my u9000 using xda premium
ok downloaded and now flashing.
Hey Zuk I Think You Have Goofed Up With "modified austrie sd kernel patch" Link In the First Post Please FIX It
The link for the ROM & Sd Kernel Patch Is Same.
deathbearer said:
Hey Zuk I Think You Have Goofed Up With "modified austrie sd kernel patch" Link In the First Post Please FIX It
The link for the ROM & Sd Kernel Patch Is Same.
Click to expand...
Click to collapse
fixed & updated
Sent from my u9000 using xda premium
spirit fm radio that i put in the rom did not appear on the screen, so i install the apk manually, i can confirm u its working first time headset is functioning, to hear the radio, also as an antenna.
x5 setting cannot set i/o scheduler on boot, so need to install other i/o scheduler app frm market
Sent from my u9000 using xda premium
This The Most Pathetic ROM, Zuk No Offense Brother But This Rom Keeps Restarting & Hanging My Phone.
Clicking On Settings Gives Force Close,
Some Parts Of The Rom Are Still Chinese
Opening Root Explorer & X5 Settings Stuck On Superuser Had To Reboot By Removing Battery.
Camera Cannot Focus Properly Double Checked With Camera ICS App
Front Facing Camera Shows A 90degree Image.
And The Mosted Talked About Feature The RADIO, It Indeed Does Work In India, But The Audio Is Bad As Hell As If Listening To A Scratched Disc. (In Short Its Useless)
Wifi & Bluetooth Working Fine
Have Not Tested GPS.
Going Back To CM
deathbearer said:
This The Most Pathetic ROM, Zuk No Offense Brother But This Rom Keeps Restarting & Hanging My Phone.
Clicking On Settings Gives Force Close,
Some Parts Of The Rom Are Still Chinese
Opening Root Explorer & X5 Settings Stuck On Superuser Had To Reboot By Removing Battery.
Camera Cannot Focus Properly Double Checked With Camera ICS App
Front Facing Camera Shows A 90degree Image.
And The Mosted Talked About Feature The RADIO, It Indeed Does Work In India, But The Audio Is Bad As Hell As If Listening To A Scratched Disc. (In Short Its Useless)
Wifi & Bluetooth Working Fine
Have Not Tested GPS.
Going Back To CM
Click to expand...
Click to collapse
its not happen to me, im using it now, except the front camera 90。yes
Sent from my u9000 using xda premium
1) Wifi did not connect properly ( it would connect once and then disconnect after few seconds).
2) After switching on the WIFI the phone switches off automatically and you will have to remove the battery to switch it on again.
3) The keyboard was in chines and sometimes even that would not pop out when i tried typing.
4) Front camera problem has already been mentioned.
I was initially excited to try this one but with the above problems its impossible to use it. Switching back to CacingKalung 2.3.7. i feel thats the most stable ROM so far. Any ways still appreciate your effort in porting another ROM. thanks.
Cheers,
Shri
shri080 said:
1) Wifi did not connect properly ( it would connect once and then disconnect after few seconds).
2) After switching on the WIFI the phone switches off automatically and you will have to remove the battery to switch it on again.
3) The keyboard was in chines and sometimes even that would not pop out when i tried typing.
4) Front camera problem has already been mentioned.
I was initially excited to try this one but with the above problems its impossible to use it. Switching back to CacingKalung 2.3.7. i feel thats the most stable ROM so far. Any ways still appreciate yourm in porting another ROM. thanks.
Cheers,
Shri
Click to expand...
Click to collapse
i hv tested wifi several times b4 uploading, i know its working. i hv told abt changing i/o scheduler to avoid hp rebooting.
and u hv choice to use another keyboard frm market if u too rigid with chinese alphabets. im not chinese but i know the option to use english keyboard, its a chinese button beside the enter key, bottom right.
i hv ported many chinese android roms, keyboard never gv me problems
Sent from my u9000 using xda premium
Up!!!!!!!!
Thanks for all your work Bud! Looks like you have been busy! Much appreciated, now I don't know which ROM to use for mu mom's phone lol. I guess I will have to try them all! But maybe if you told me your favorite I can try it first! Thanks again good buddy.
hey zuk one question which version of kernel used ? i want to know if i could use it over sharp kernel 2.3.5 rom's kernel that showed issues u may remember .
kshitij_bhatt said:
hey zuk one question which version of kernel used ? i want to know if i could use it over sharp kernel 2.3.5 rom's kernel that showed issues u may remember .
Click to expand...
Click to collapse
dude if you are over 2.3.5 stock then it not for you, its base on 2.6.32.9 kernel ...
can we please have a 4shared mirror?
Traditionally Moto doesn't support call recording while MIUI ROMs has always built-in call recording support though the Atrix ports don't support call recording. xploited has extracted the audio lib from the Moto Chinese ROM which does support recording >>
Please, use the libs only packages first and use a 3rd party app like AndroRec or CallRecorder
updated 2.3.4 libs http://dl.dropbox.com/u/11446902/libs.zip
updated 2.3.5 libs http://dl.dropbox.com/u/11446902/libs2.3.5.zip
thanks to xploited for the [MOD]
[NEW] 2.3.5 libs from Chinese ROM Now http://www.mediafire.com/download.php?mppmm3wo92ab5gl
I think I recall the HKTW build having this feature. Is anyone adventurous enough to try porting those libs to other firmwares?
I'm not adventurous, I'm just trying to spread some knowledge around.
I actually tried getting this to work.
Porting libraries from Defy is not an option, since the libraries are device unique and cannot even be decompiled.
+ I extracted the libs from the HKTW ROM for the Atrix and tried using them on CM7.2. I was able to boot fine but the call recording still didn't work.
It might be incompatible with CM7, or there are other dependencies, or we need libs from a newer 2.3.6 rom, I am not sure.
p.s. I can create a CWM package if you are willing to try them on the Blur based roms.
xploited said:
I actually tried getting this to work.
Porting libraries from Defy is not an option, since the libraries are device unique and cannot even be decompiled.
+ I extracted the libs from the HKTW ROM for the Atrix and tried using them on CM7.2. I was able to boot fine but the call recording still didn't work.
It might be incompatible with CM7, or there are other dependencies, or we need libs from a newer 2.3.6 rom, I am not sure.
p.s. I can create a CWM package if you are willing to try them on the Blur based roms.
Click to expand...
Click to collapse
If you post a CWM version for blur, I will try it on Nottachtrix 1.3.1 and share the results. Thanks!
See post #9
xploited said:
K... Attempt #1, files taken from 2.3.4 HKTW ROM.
Step 1: Do a Nandroid backup in case you get a soft brick from flashing these.
Package 1: just the libs, use 3rd party recording app to test the recording
http://dl.dropbox.com/u/11446902/libs.zip
Package 2: libs + BlurDialer.apk, this dialer supposadly has a record button during calls
http://dl.dropbox.com/u/11446902/libs+dialer.zip
I am also downloading a 2.3.5 chinese rom right now, so there will probably be attempt #2 with libs from that rom.
=========================================
Attempt #2, files taken from 2.3.5 Chinese retail ROM.
Step 1: Do a Nandroid backup in case you get a soft brick from flashing these.
Package 1: just the libs, use 3rd party recording app to test the recording
http://dl.dropbox.com/u/11446902/libs2.3.5.zip
Package 2: libs + BlurDialer.apk, this dialer supposadly has a record button during calls
http://dl.dropbox.com/u/11446902/libs+dialer2.3.5.zip
Click to expand...
Click to collapse
This is very exciting. Coming from the Defy community which I dare say is super active and very bleeding edge, I'm thrilled to be a part of the Atrix community now. Looking forward to xploited cracking this! I use the 3rd party app 'AndroRec' and I'll try flashing attempt #2 over neutrino and let you know.
p.s. MIUI seems to have cracked this in all their supported roms without a hitch. Maybe we ought to study that and see how it goes?
Thank you for setting these up. For some reason, CWM is aborting when I attempt to flash them (Status 0). Can I just copy the APK and .lib files into the directories listed in the install script?
EDIT: I ended up being too impatient to wait so I copied the APK into the system directory, and the .SO files into the /lib/ directory and....
the 2.3.5 file (that included BlurDialer) soft-bricked me. I could not get past the Motorola non-animated splash on boot. I am recovering now, and will post when I give the first files a try.
What 3rd party app would allow me to test drive just the lib files?
i'm using china firmware,but call recording is one-way.can anyone modify it??
i can provide the libs and phone.apk.
tobnddl said:
Thank you for setting these up. For some reason, CWM is aborting when I attempt to flash them (Status 0). Can I just copy the APK and .lib files into the directories listed in the install script?
Click to expand...
Click to collapse
Sorry, I have updated the files and they should flash properly now.
Please, use the libs only packages first, and the ones with apk only as last resort.
If recording doesn't work with just the libs, it won't work with the apk either.
Updated files:
updated 2.3.4 libs http://dl.dropbox.com/u/11446902/libs.zip
updated 2.3.5 libs http://dl.dropbox.com/u/11446902/libs2.3.5.zip
You can use apps like AndroRec, Total Call Recorder or Call Recording widget to test these.
tobnddl said:
Looking forward to xploited cracking this! I use the 3rd party app 'AndroRec' and I'll try flashing attempt #2 over neutrino and let you know.
p.s. MIUI seems to have cracked this in all their supported roms without a hitch. Maybe we ought to study that and see how it goes?
Click to expand...
Click to collapse
I tried the 2.3.4 one on Neutrino with no luck. You might wanna try the updated files above from 2.3.5.
Can you point me to a specific GB build of MIUI that has call recording implemented? Do they use a separate app for recording or is it built into the dialer?
p.s. Went ahead and downloaded the last MIUI GB build - MIUI.US_GB_V2.3.23.
It has the exact same audio libs as CM7.2, which don't support audio recording.
Can anyone actually confirm that this or other build of GB Miui supports audio recording?
kidqian said:
i'm using china firmware,but call recording is one-way.can anyone modify it??
i can provide the libs and phone.apk.
Click to expand...
Click to collapse
Which version of China firmware are you using? By one way call recording you mean that only incoming calls are recorded or only outgoing calls?
xploited said:
Can you point me to a specific GB build of MIUI that has call recording implemented? Do they use a separate app for recording or is it built into the dialer?
p.s. Went ahead and downloaded the last MIUI GB build - MIUI.US_GB_V2.3.23.
It has the exact same audio libs as CM7.2, which don't support audio recording.
Can anyone actually confirm that this or other build of GB Miui supports audio recording
Click to expand...
Click to collapse
I can confirm that no miui rom from atrix supports audio recording. We got the option but it doesn't record anything.
Sent from my MB860 using XDA Premium App
stevendeb25 said:
I can confirm that no miui rom from atrix supports audio recording. We got the option but it doesn't record anything.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I have also tried several miui ROMs w/o any luck recording.
Sent from my MB860 using Tapatalk 2
MiCode Portal Link
rozzco said:
I have also tried several miui ROMs w/o any luck recording.
Click to expand...
Click to collapse
It's strange why it would work on the Chinese ROMs and not on others especially MIUI since that is also chinese though based heavily on CM code. On the Defy, all Moto Blur/deBlur & CM7/CM9 ROMs didn't support it, but all MIUI variants supported it.
MIUI team have pledged to open their code soon to the public and a few MIUI apps have already gone open. Maybe that ought to give us some insights?
https://github.com/MiCode
i remember when i used to have an HTC some developer had to patch the kernel to get the call recording feature to work.. not just lib changes
OK. Can anyone point me to a specific ROM for the Atrix that has call recording?
I have just downloaded PureBlur 1.1 which is based on HKTW 2.3.4 and it the call recording on it also doesn't work. Strange.
r3flux said:
It's strange why it would work on the Chinese ROMs and not on others especially MIUI since that is also chinese though based heavily on CM code. On the Defy, all Moto Blur/deBlur & CM7/CM9 ROMs didn't support it, but all MIUI variants supported it.
MIUI team have pledged to open their code soon to the public and a few MIUI apps have already gone open. Maybe that ought to give us some insights?
https://github.com/MiCode
Click to expand...
Click to collapse
That's the thing, MIUI for Atrix DOESN'T have call recording. Miui provides a feature for recording, but without the proper libs it will not work.
---------- Post added at 11:54 PM ---------- Previous post was at 11:42 PM ----------
kidqian said:
i'm using china firmware,but call recording is one-way.can anyone modify it??
i can provide the libs and phone.apk.
Click to expand...
Click to collapse
p.s. can you pull libaudio.so from your rom with working call recording?
xploited said:
OK. Can anyone point me to a specific ROM for the Atrix that has call recording? p.s. can you pull libaudio.so from your rom with working call recording?
Click to expand...
Click to collapse
I would like to compile a list of Android phones that either...
1) Come with native call recording functionality.
2) Support call recording with 3rd party app/hack/ROM.
Please note that phones/apps that require using speakerphones (i.e. muffled voice from the other side; cannot record while headsets are used) to record the calls do *not* count. You can test by recording with a headset, Bluetooth or wired, and see if the voices from both sides are still loud and clear.
Most, if not all, "call recorder" apps on Android Market make use of such "speakerphone" hacks.
Models that have this function built-in.
Meizu M9
Motorola Defy (Chinese mainland version ME525)
Motorola XT701
Samsung Galaxy S (South Korean version SHW-M110S, with firmware DH09 or newer)
Models that don't have this function built-in but can use a 3rd party app/hack/ROM to record calls in both ways without turning on speakerphone.
HTC Desire; requires root and custom kernel/ROM
HTC HD2; requires custom rom and patch
HTC Hero/DROID ERIS; requires root and custom kernel; with rViox, support thread
HTC Magic (a.k.a. G2); requires root and custom kernel; with rViox, support thread
HTC Sensation; requires custom kernel, ROM and 3rd party app, support thread; Thanks to ccris
HTC Wildfire; requires root and custom kernel; with rViox, support thread
Motorola Defy; requires Chinese 2.2 ROM or Hacks with 3rd Party App or CM7 with 3rd Party App
Samsung i9000 (Galaxy S); with Hacks #1 or #2
Samsung i9100 (Galaxy S II); with 3rd Party App
Sony Ericsson X10, X10 Mini Pro and X8; with Call Recorder by Schass Innab
ZTE Blade (a.k.a. Orange San Francisco); requires custom ROM
The original issue 2117: http://code.google.com/p/android/issues/detail?id=2117
Original thread: http://androidforums.com/android-lou...-function.html
call recording works on 4.5.3-118-OLY-3 (45.2.14.ME860.ChinaRetail.en)
with stock radio of this firmware(BP_N_01.41.00R) and stock kernel of this firmware
File does not work on the latest CM7
The ROM mentioned here: http://forum.xda-developers.com/showthread.php?t=1615689 has working call recording. Maybe this ROM can serve as a good starting material to make a CWM-flashable ZIP with the requisite customization.
is there a custom kernel available for ATrix that support 2way call recording? i heard of "bricked" kernel for HTC sensation that supports it. there is an app by "skvalex" in market but he said only snapdragon chipset are supported. so atrix is a tegra. i guess no recording?
chagla said:
is there a custom kernel available for ATrix that support 2way call recording? i heard of "bricked" kernel for HTC sensation that supports it. there is an app by "skvalex" in market but he said only snapdragon chipset are supported. so atrix is a tegra. i guess no recording?
Click to expand...
Click to collapse
Read the post above yours =.=
This ROM is based on the awesome work of kasper_h with some improvements on stabilty and the latest source from CM, so it's pretty close to stock.
Kernel is the mackay kernel updated to latest 3.0.y linux branch, with some improvements from the stock one.
Improvements/fixes:
Device:
App2sd fixed (init procedure adapted from galaxy sl rom)
General code cleanup
Triple buffering for smoother animations
Enabled WebGL
Increased powervr buffer size (powervr.ini from Eviscerations velox rom)
Charger suspend implementation to turn off screen in charger mode
Proximity sensor on call screen fixed
Other minor performance tweaks in Boardconfig, init...
(patches mostly taken from galaxy s/sl CM rom)
Kernel:
Kernel patched to latest 3.0.101
Included lots of patches from the latest LG kernel sources
Full wipe is necessary since the mountpoint and procedure of the sdcard is changed!
Known issues:
- Video recording is crappy as usual... (if someone is interested in helping to port the camera hal, please let me know)
- Wifi hotspot (?)
Install:
If you have mackay rom or another cm10.1 based rom => full wipe!
Flash with with CWM or TWRP recovery, then flash the gapps on top.
Gapps
Sources:
Kernel
Device
Download:
cm-10.1-20131203-p970
cm-10.1-20131203-p970 [MIRROR]
Credits:
kasper_h(codebase)
Evisceration for his help, work and for wiping out my initial doubts
Ricardo Cerqueira and anyone else who has contributed to CM and to our device
dhiru1602 for his work on the galaxy sl rom
the galaxy s team from CM for their codebase
LG for manufacturing our device
PS: Thanks to anyone who has worked and still works for our forgotten device
downloading
Any bug ?
LG-P970 cihazımdan Tapatalk 2 ile gönderildi
Downloading...thanks for you work!!
Enviado desde mi GT-I9300 mediante Tapatalk
hendry1239 said:
Any bug ?
Click to expand...
Click to collapse
The ones listed above (wifi hotspot, video recording) + tell me if you find something
3d gaming works, at least fifa 14 runs fine
washbeer said:
App2sd fixed
General code cleanup
Triple buffering for smoother animations
Enabled WebGL
Increased powervr buffer size
Charger suspend implementation to turn off screen in charger mode
Other minor performance tweaks in Boardconfig, init...
Click to expand...
Click to collapse
at least you could have added proper credits for all your additional fixes and improvements.
Evisceration said:
at least you could have added proper credits for all your additional fixes and improvements.
Click to expand...
Click to collapse
damn, i knew i forgot something... :silly:
washbeer said:
damn, i knew i forgot something... :silly:
Click to expand...
Click to collapse
i rather meant the "powervr" and "app2sd" fixes
Evisceration said:
i rather meant the "powervr" and "app2sd" fixes
Click to expand...
Click to collapse
ok clarified that
Please provide a link to gapps that are compatible with this rom.
Thanx
abhi_g1 said:
Please provide a link to gapps that are compatible with this rom.
Thanx
Click to expand...
Click to collapse
added. also other gapps for android 4.2.2/ cm10.1 should work
Can we just flash on old mackey rom or does it require a factory reset...
shivraj3192 said:
Can we just flash on old mackey rom or does it require a factory reset...
Click to expand...
Click to collapse
Factory reset is required or you will end up with double folders in your gallery and other strange things..
Update: somehow i got the lg camera hal working, previews are working fine, but the capturing doesn't trigger, settings (white balance, exposure...) don't take effect, no autofocus and the image is blueish.
strangely video recording works fine
Hmm. Good work mate. I am happy with CM10 build but if you get the camera to normal, i will try your ROM. By normal i mean CM standards, i don't have high expectations.
Pondera said:
Hmm. Good work mate. I am happy with CM10 build but if you get the camera to normal, i will try your ROM. By normal i mean CM standards, i don't have high expectations.
Click to expand...
Click to collapse
and by cm standards i hope you mean p970 standards and not galaxy s standards
seriously the lg camera hal is nothing for ordinary mortals like me... a lot of features are controlled by the fw3a binaries and icapture lib, and i can't find the sources for them anywhere.
btw the camera in my build works, just on hd video recording sometimes it freezes and has low framerates (usual p970 standard )
as i remember well this bug was also present on cm10, correct me if i'm wrong
washbeer said:
and by cm standards i hope you mean p970 standards and not galaxy s standards
seriously the lg camera hal is nothing for ordinary mortals like me... a lot of features are controlled by the fw3a binaries and icapture lib, and i can't find the sources for them anywhere.
btw the camera in my build works, just on hd video recording sometimes it freezes and has low framerates (usual p970 standard )
as i remember well this bug was also present on cm10, correct me if i'm wrong
Click to expand...
Click to collapse
Ah, ok then mate. I thought camera was troubled. If it is normal CM quality on P970 then i will try it when i have the phone empty for couple of days. I don't care much about video, a decent photo quality is enough for me, in case i need it. Thanks.
Pondera said:
Ah, ok then mate. I thought camera was troubled. If it is normal CM quality on P970 then i will try it when i have the phone empty for couple of days. I don't care much about video, a decent photo quality is enough for me, in case i need it. Thanks.
Click to expand...
Click to collapse
at least photo capturing works just like on stock rom.
neither do i care about video, but then comes this moment 2-3 times a year where you think "damn, i can't record this crazy sh*t"
good rom. thanks
Can anybody help me assigning G-Button as wake button in this rom?
I am unable to do so by following the guide given in the general forum
Team ARM Core Presents CMX11 NitroX Edition
CMX11 NitroX Edition is based on CMX11 Rom!This rom is powered with performance engines,Battery Tweaks,Audio Engines and many more tweaks and bug fixes.CMX11 NitroX Edition is the fastest cm11 say good bye to lags!
A Big Thanks to @omerdeniz99 for making CMX11! Thank you so much bro!
Thanks to @raisul2010.5396 for his modded TWRP and Samurai OC Kernel!
also Thanks to @mohammad.afaneh for makingTWRP for our device!
and Thanks to me for making NitroX Edition!
Based on 'ROM-PacMe' CM11.His Github
https://github.com/ROM-PacMe
Bugs:
No bugs Everything is working
NitroX V3 is more faster,stable and fully bugless
Features of NitroX V3:
1.Camera Fully Working
2.Video Recording Fully Working
3.Media Scanner Fully Working
4.Google Apps Fully Working
5.Download Manager Fully Working
6.Emojis are fully working(Use the keyboard)
7.Video playing fully working and smooth upto 340p(Use Software Decoder in MX Player)
8.Super Smooth and Fast
9.System 30MB Free
10.All languages are supported
NitroX V3 Download Link: http://www32.zippyshare.com/v/5Eg0N4xd/file.html
GApps Download Link: https://forum.xda-developers.com/devdb/project/dl/?id=20183(GApps can cause heavy lags :/)
Video Recording Instructions:
Steps:
Firstly fix the recording app bug by following below steps:
1.Copy video recorder.apk from system/priv-app to sd card
2.Delete the apk from priv app
3.reboot your phone
4.install the app as user app from sd card
Now follow these steps:
1.Open the video recording app
2.Go to settings and change audio quality to the lowest level 11khz
3.App will give force close dont worry!Start the app again!Record video
4.View your video through the video recording app
NitroX V2
Changelog Of NitroX V2
1.Download manager working
2.Gapps fully working
3.New CMX Bootanimation
4.Inbuilt Ad-Blocker
5.All useless system apps removed
6.System 35MB Free
7.All indian languages supported
8.Fully Optimized and Boosted
9.Super responsive and liquid smooth UI
10.Performance and Battery tweaks added
NitroX V2 Download Link: NOT AVAILABLE
NitroX V1:
Features:
1.Ultimate Performance Engine Installed(Thread:- http://http://forum.xda-developers.com/android/software-hacking/mod-ultimate-performence-blazing-fast-t3482317)
2.Fully Zipaligned
3.Fully Sqlite optimized
4.Full MDPI framework for better stability
5.Support for Indian Languages(Hindi and Marathi)
6.All useless apps removed(System 20MB Free)
7. 2 New audio engines installed(Pure Audio 2.0 and Extreme Beats Aural Maximizer)
8.New Viper4Android(Thread:- http://forum.xda-developers.com/showthread.php?t=2191223)
9.Fast CM11 Trebuchet launcher added
10.Stable Camera(Can't conncect to camera issue fixed)
11.CM11 S new colored lockscreen
12.Samurai OC Kernel Added(Thread:- http://forum.xda-developers.com/galaxy-ace/s5830i-develop/dev-samurai-kernel-samsung-galaxy-ace-t3490339)
13.Latest TWRP 3.0.2.1-b1 Added(Thread:- http://forum.xda-developers.com/galaxy-ace/s5830i-develop/recovery-twrp-2-8-7-0-touch-recovery-t3463050)
14.Viper4Android audio build.prop tweaks added
15.Kernel Adiutor Mod added
16.New sound recorder added
Download Link:
https://drive.google.com/open?id=0B7ixwTfUzsa6X2hJTHVhZ2hiVUk
Sim Unlock Troubleshoot
Steps:
1.Flash stock rom via odin
2.Root the stock rom
3.Install Galaxy Toolbox app
4.Unlock your galaxy using the app
INSTALLATION:
FIRST FLASH THIS MODEM (for fix sim bug) AND TEMPORARY RECOVERY VIA ODIN (clockworkmod 6.0.1.2)
DOWNLOAD MODEM
https://www.androidfilehost.com/?fid=24566454284190169
DOWNLOAD RECOVERY
http://forum.xda-developers.com/devdb/project/dl/?id=18641
After falshing of recovery and modem are done flash this CWM 6.0.5.3 by rebooting to recovery using 3-button combo
DOWNLOAD CWM 6.0.5.3
http://forum.xda-developers.com/devdb/projvect/dl/?id=18698
After flashing of CWM done then go to Advanced and select Reboot Recovery.It will reboot you to the new CWM recovery.Now go to Mounts and Storage then Format system,data,cache,sd-ext.Next Install the ROM from sdcard using ClockworkMod Recovery
After installation done Flash Fly On Mod for performance and battery boost.Download Here:
https://forum.xda-developers.com/showthread.php?t=2226373
Petformance Tips:
1.Enable Developer Options by tapping the build number.Disable all window animations in Developer.
2.Enable KSM from memory management option in performance tab at settings
Give me a Thanks if you like my work
If you get installation errors then follow below steps!
1.Flash boot and modem via odin
2.go to recovery mode and flash cwm 6.0.5.3 then go to advanced reboot to recovery
3.Format system,data,cache
4.Mount system,data,cache
5.Install the rom
6.Reboot
My personal Performance Boosting Suggestions:
1.Disable all animations
2.Enable KSM via kernel adiutor
3.Enable very aggressive low memory killer via kernel adiutor
4.Use the prevent running xposed module to prevent auto start of apps
:good: keep going man , hail team arm core
raisul2010.5396 said:
:good: keep going man , hail team arm core
Click to expand...
Click to collapse
hail team arm core
good work bro
Screenshot?,play store work?,good bro
Sent from my GT-S5830i using XDA Free mobile app
boby123 said:
Screenshot?,play store work?,good bro
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
screenshot is same.as cmx11 so i dont attached and download manager bug dont fixed it so playstore wont work
omerdeniz99 said:
good work bro
Click to expand...
Click to collapse
hail team arm core
Great work, thank you! Reading the changelog, I see that almost all the issues connected with the CMX11 Snapshot 9 I've underlined are solved apart from the one with the download manager and, maybe, the very slow reaction of the screen when an alarm is ringing or a call is incoming. Maybe I'm mistaken and it is solved too? That would be great!
Unfortunately by now I haven't a cooperve at hand to test the rom myself (the one I work with is my fiancee's and it is quite hard to get hold of it) but I plan to do it ASAP. I don't know if I would be able or not but don't hesitate to tell me if there is something I could do (or at least try to do) to help you with the issue with the download manager. Have a good day and thank you again for your great work!
-=Guybrush=- said:
Great work, thank you! Reading the changelog, I see that almost all the issues connected with the CMX11 Snapshot 9 I've underlined are solved apart from the one with the download manager and, maybe, the very slow reaction of the screen when an alarm is ringing or a call is incoming. Maybe I'm mistaken and it is solved too? That would be great!
Unfortunately by now I haven't a cooperve at hand to test the rom myself (the one I work with is my fiancee's and it is quite hard to get hold of it) but I plan to do it ASAP. I don't know if I would be able or not but don't hesitate to tell me if there is something I could do (or at least try to do) to help you with the issue with the download manager. Have a good day and thank you again for your great work!
Click to expand...
Click to collapse
i have added samurai oc kernel it is designed to reduce the screen on delay.Im telling you some tweaks that will help you to get rid of screen delay 1st disable all animations 2nd force stop all user apps using prevent running xposed module
honestly we dont have a 100% working solution for the screen on delay we are working on it maybe in next update it will be fixed
and the downlod manager is not working till now i tried everything like extracting from other cm11 builds and also from other device's cm11,i tried setting correct permissions and pushing apks to app/priv-app nothing worked we are working on it to fix this
sohamsen said:
the downlod manager is not working till now i tried everything like extracting from other cm11 builds and also from other device's cm11,i tried setting correct permissions and pushing apks to app/priv-app nothing worked we are working on it to fix this
Click to expand...
Click to collapse
What you describe here has been more or less the path followed by me when I've tried to solve the issue with the snapshot 9, to no avail unfortunately. The issue with the download manager has been introduced in the snapshot 9: if I remember well (but I'm almost certain about that), everything was fine on that side with the snapshot 8 and this could help with tracking down the source of the issue (I know that with words everything seems simple while it actually isn't! ) though omerdeniz99 certainly know that better than anyone else being him the mantainer of that project.
For what concerns the screen wakeup delay, I'm sure things would be better with your last modifications and I would follow your advices as soon as I would be able to test your rom. Thanks!
Bugs :
WIFI doesnt work
compass doesnt work
hostspot doesnt work
I used this rom
"ACERom Build 2"
wifi works but hotspot and compass doesnt work on above ROM , And that ROM is very slow
also it can't unlock , locked SIM
video Recording is not work !
let me say honestly , It is unstable ROM
-=Guybrush=- said:
What you describe here has been more or less the path followed by me when I've tried to solve the issue with the snapshot 9, to no avail unfortunately. The issue with the download manager has been introduced in the snapshot 9: if I remember well (but I'm almost certain about that), everything was fine on that side with the snapshot 8 and this could help with tracking down the source of the issue (I know that with words everything seems simple while it actually isn't! ) though omerdeniz99 certainly know that better than anyone else being him the mantainer of that project.
For what concerns the screen wakeup delay, I'm sure things would be better with your last modifications and I would follow your advices as soon as I would be able to test your rom. Thanks!
Click to expand...
Click to collapse
ok i will try next build with the v8 base
h1229m said:
Bugs :
WIFI doesnt work
compass doesnt work
hostspot doesnt work
I used this rom
"ACERom Build 2"
wifi works but hotspot and compass doesnt work on above ROM , And that ROM is very slow
also it can't unlock , locked SIM
video Recording is not work !
let me say honestly , It is unstable ROM
Click to expand...
Click to collapse
flash stock rom via odin then use galaxy toolbox and unlock ur sim then follow the steps and install cmx nitox then install samurai oc kernel
sohamsen said:
flash stock rom via odin then use galaxy toolbox and unlock ur sim then follow the steps and install cmx nitox then install samurai oc kernel
Click to expand...
Click to collapse
I Did ! I install ROM and samurai oc kernel
Hostspot is working , But Wifi not working !!!
Video Recording Not working Also
sohamsen said:
ok i will try next build with the v8 base
Click to expand...
Click to collapse
It could be a valid idea but please be adviced that now I don't remember what (too much time has passed since I've tested it) but the v8 had some other issues (quite annoying I remember: if I remember well, one was the camera which was even worse than the one included in v9 but this isn't a problem since you've completely replaced it) which forced me to update to the v9 as soon as it was released.
h1229m said:
Video Recording Not working Also
Click to expand...
Click to collapse
Missing video recording capability is a known issue since the first versions of CMX11 indeed this is underlined in the features list for it and a workaround is suggested. I may be wrong but I think it could be due to something from Broadcom being still closed source.
I was wondering about one thing. One of the main changes between cmx11 v9 and v8 was the replacement of the previous browser with UC Browser. It uses a built-in download manager and this could be the cause for the issue with the download manager (probably, something more than the browser alone was removed and/or modified to take advantage of that) but I remember that I had tried to replace it with the previous solution, restore all the dependencies and permissions but this didn't fix the download manager... Maybe I had missed something or failed with one of my modifications, it is certainly possible.
Again, omerdeniz99 is the one who knows for sure what's going on, let's hope his exams will go the best way possible and when he would have spare time for his projects again I'm sure we would receive news from him.
h1229m said:
I Did ! I install ROM and samurai oc kernel
Hostspot is working , But Wifi not working !!!
Video Recording Not working Also
Click to expand...
Click to collapse
WiFi should work
ok then go to aroma installer of samurai kernel then choose stock instead of samurai
-=Guybrush=- said:
It could be a valid idea but please be adviced that now I don't remember what (too much time has passed since I've tested it) but the v8 had some other issues (quite annoying I remember: if I remember well, one was the camera which was even worse than the one included in v9 but this isn't a problem since you've completely replaced it) which forced me to update to the v9 as soon as it was released.
Missing video recording capability is a known issue since the first versions of CMX11 indeed this is underlined in the features list for it and a workaround is suggested. I may be wrong but I think it could be due to something from Broadcom being still closed source.
Click to expand...
Click to collapse
i will also update the cmx nitrox after my exams