May a mod please delete as i have decided to just a have a few threads in different forums
thanks
Interesting... Look awesome
If can run in my Tab7.7
Any link that I download this? Tnx in advance
awesome man!
i'l think , it thats work on huawei mediapad
Unsure if it will work on the following :
Zenithink C71 ZT280 7" Tablet
Unlocked Bootloader
ICS 4.0
for me .... has about 5 million alternative names...
Looks nice!
Sent from my Dell Streak using XDA
should work on any tablet running honeycomb or ics
give it a go
it should work
if it doesnt just flash your rom again to get it back to normal
I'm running CM9 on my nook's SD card. When I flash the zip, nothing changes. The recovery isn't clockworkmod, but it flashes anything you throw at it. Unfortunate too, I wanted to use this!
make it works on 2.3 tablet like galaxy tab, kindle fire... plz?
Sent from my LG-P500 using Tapatalk 2 Beta-5
kcls said:
I'm running CM9 on my nook's SD card. When I flash the zip, nothing changes. The recovery isn't clockworkmod, but it flashes anything you throw at it. Unfortunate too, I wanted to use this!
Click to expand...
Click to collapse
it probs needs to be cwm as it is using some extra code to install called villain that needs cwm
acax456 said:
make it works on 2.3 tablet like galaxy tab, kindle fire... plz?
Sent from my LG-P500 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
make a back up and give it a go
youprobs wont know the answer to this but does anyone know if the 7inch devices use mdpi images? if so then this should work fine
most stupid question from me :
how would i flash this with unlocked boot
pele78 said:
most stupid question from me :
how would i flash this with unlocked boot
Click to expand...
Click to collapse
learn how to used clockwork mod and then flash as zip
I have a Problem with the theme...i flashed the overcome 2.3.1 firmware and the pershot kernel.
I download the first file (VillainHoneycomMetro...) and flash it in the CWM. The system reboot and the only what i see is the normal stock theme, but the taskbar (Homebutton, Backbutton, Time...) on the downside of the display is disappeared...
Do i have forget something to install or so?
Jano611 said:
I have a Problem with the theme...i flashed the overcome 2.3.1 firmware and the pershot kernel.
I download the first file (VillainHoneycomMetro...) and flash it in the CWM. The system reboot and the only what i see is the normal stock theme, but the taskbar (Homebutton, Backbutton, Time...) on the downside of the display is disappeared...
Do i have forget something to install or so?
Click to expand...
Click to collapse
that means the systemui.apk has crashed
try flashing rom then the zip again otherwise i dono
I do it again and the taskbar is disappeared again.
the steps i do are right?
---------- Post added at 11:32 PM ---------- Previous post was at 11:26 PM ----------
Here my steps, maybe there is the mistake...
1. flash the Overcome Rom (CWM)
2. go to your website an download the first Honeycomb file with the tab.
3. flash the downloadet zip file in CWM (install menu -> Yes) (no error)
4. reboot systeme
Then my Taskbar is disappeared and i can flash the stock rom and thene the overcome to become the taskbar back to my display.
Jano611 said:
I do it again and the taskbar is disappeared again.
the steps i do are right?
---------- Post added at 11:32 PM ---------- Previous post was at 11:26 PM ----------
Here my steps, maybe there is the mistake...
1. flash the Overcome Rom (CWM)
2. go to your website an download the first Honeycomb file with the tab.
3. flash the downloadet zip file in CWM (install menu -> Yes) (no error)
4. reboot systeme
Then my Taskbar is disappeared and i can flash the stock rom and thene the overcome to become the taskbar back to my display.
Click to expand...
Click to collapse
other overcome users have it working fine
honestly dno whats gone wrong
Firstly,thank you for your impressive job! i like it very much!
my device is HTC VIEW 4g and i followed the instruction step by step.
however, it always show me this, sorry, the application system UI (process com.android.systemui) has stopped unexceptedly. please try again.
so is that means this UI can't be used on the HTC view 4G?
but i really like it very much. would you please do sth for this poor guy?
BTW, my device has flashed the HC.
etfact said:
Firstly,thank you for your impressive job! i like it very much!
my device is HTC VIEW 4g and i followed the instruction step by step.
however, it always show me this, sorry, the application system UI (process com.android.systemui) has stopped unexceptedly. please try again.
so is that means this UI can't be used on the HTC view 4G?
but i really like it very much. would you please do sth for this poor guy?
BTW, my device has flashed the HC.
Click to expand...
Click to collapse
sorry but probs wont support phones anytime in the near future
thank you all the same！
hope for the next version！
BLESS！
test the comment here,,,,
Related
Here you are a 4.0.3 backup for CWM. Is stock (untouched) and non rooted. You can install it unzipping it in your SD root directory, and then boot onto CWM and select "Restore" inside "Backup & Restore" menu. Tested on i9023. DON'T USE IT ON NEXUS S 4G
http://www.multiupload.com/H0TCP2UPHX
Enjoy!
P.D: Do a backup before install this.
P.D.2: Do this will wipe your current installation.
P.D.3: You must use ClockWorkMod 5.0.0.0 or higher.
For real ! ? . . .
TY
Will this work on i9023?
thanks.. let me try it out
salvacion said:
Will this work on i9023?
Click to expand...
Click to collapse
read the first post.
installation aborted.
tried to installed on 9020 (Tmobile)
fatypaul said:
installation aborted.
tried to installed on 9020 (Tmobile)
Click to expand...
Click to collapse
Just for i9023 for now. So stop trying...
BTW, u must install it using the "backup & restore" option.
works for me on i9023...now i'm waiting a guide to root
Arkaknio said:
Just for i9023 for now. So stop trying...
BTW, u must install it using the "backup & restore" option.
Click to expand...
Click to collapse
My bad - I though 9020t and 9023 are comparable.
---------- Post added at 04:03 AM ---------- Previous post was at 04:02 AM ----------
bruciato said:
works for me on i9023...now i'm waiting a guide to root
Click to expand...
Click to collapse
There is a SU.install.zip out there (in XDA) for that.
Please report if root re-root is successful.
For this to work,do you need to go back to stock 2.3.6?
Or can you do it with any rom.
THanks
excuse me can somebody tell me if after they installed it messed their stock recovery...or does adb think ur i9020 now or somin..i read these problems in other threads thats y...
No need to go back or to install smth special. This backup will work for any rom.
yes pls someone tell me if this is messing with the stock recovery..? does adb or the recovery think ours is i9020...someone tell me if they are able to get into recovery after the install???
fatypaul said:
My bad - I though 9020t and 9023 are comparable.
---------- Post added at 04:03 AM ---------- Previous post was at 04:02 AM ----------
There is a SU.install.zip out there (in XDA) for that.
Please report if root re-root is successful.
Click to expand...
Click to collapse
su.zip flash mode via cwm doesn't work(for me)
bruciato said:
su.zip flash mode via cwm doesn't work(for me)
Click to expand...
Click to collapse
dude u have an i9023 right..? can u tel me after u installed this backup..are u able to get into stock recovery?
Play safe... don't try it until further release by cyanogen.
Accidentally sent from my Google Nexus S using XDA Premium
thanks.
only English language?
Nexus S i9023 _ICS
melvinchng said:
Play safe... don't try it until further release by cyanogen.
Accidentally sent from my Google Nexus S using XDA Premium
Click to expand...
Click to collapse
listen to this guy and be patient and wait for Cyanogen Mod team for a fresh rom and more informative thread then an unofficial quick thread like this one.
Guys dont use this. Wait for a ROM cuz this isnt rooted...you have to reroot cuz SU is present, but not actually working
Do not use this
very fast and smooth
no wifi working
no back button working
Hey guys, I just compiled CWM v6.0.1.4 from here: http://builder.clockworkmod.com/
You gotta add the files manually, since building from known source somehow doesnt wanna work.
PLEASE REMEMBER, I am not responsible for ANY kind of damage. You are responsible for what you're doing with your device, not me... So dont blame me, if you screw it up
It's a kind of alpha release, since it might still be pretty buggy. I just let it compile, flashed it to the device and made some tests. Seems to work fine
I made a package of a simple flasher (made by Redy2006, so all credits for the flasher go to him. Find it here
Credits go to:
Koush (ClockWorkMod)
Ricardo (Simply the best)
Ilko (Script)
All makers and contributors of: http://builder.clockworkmod.com/
Seems Redy took the flash .bat file from Ilko.
Get the new Recovery + Flasher here: http://www.mediafire.com/?lpa8aisgtli9v78
MD5 Checksum of recovery.img: 291e313fe2b891a04d246357d656045a
MD5 Checksum of the whole .7z file: 8578e0a0839cbba06edbff601311a1eb
If the above solution doesnt wanna work, take this: http://www.mediafire.com/?k544q9t2db1lv2e No thanks goes to koila33
Known bugs:
Flashing softkeys.
I gotta find out, how I can compile it myself (without the homepage and then try to fix bugs). If you feel like improving this, just go ahead
Changelog:
New backup format that de-duplicates data between backups.
Faster backups.
Fixed restores > 2GB.
Minor UI tweaks (new background, animated Android)
My changelog:
Initial release
any changelogs ??
Added sorry, forgot about it in the hurry
Nice.
Thanks.
Hey.
I´ve made a flashable .zip for those that have problems like me in using .cmd´s on windows.
Here: http://www.mediafire.com/?k544q9t2db1lv2e
No thanks to N00BY0815.
koila33 said:
Hey.
I´ve made a flashable .zip for those that have problems like me in using .cmd´s on windows.
Click to expand...
Click to collapse
Question, can recovery flashed via recovery?
AFAIK, /dev/block/mmcblk0p4 are mounted at recovery, so does it works? CMIIW, since I never tried it :fingers-crossed:
Duarte tried it and it seems to work But I gotta confess, I didnt try it myself... So I also have to wait for confirmation. Also I dont get, why rmcc didnt compile the new version for us yet...
Yeah, the flashable sip works I just tried it. But i still like TWRP better, so I am back using that.
Sent from my LG-KU5900 using xda premium
Guys maybe it sounds loke noob question , but with this new recovery it is posible to boot directly in to recovery from turned off phone, that would be very helphul especialy for those ho have bricked their phone and they do not have their pc near by (like happend to me)
sent from my Nokia 1100 with droid 4.0
What is the difference with the other CWM? Could someone post a screenshot
Sent from my LG-P970 using xda app-developers app
Animations faster backups etc
$3nt fr0m my K4ng3d Ph0n3
I found a video with the new CWM
http://youtu.be/t8UuS6pSa8I
redy2006 said:
Question, can recovery flashed via recovery?
AFAIK, /dev/block/mmcblk0p4 are mounted at recovery, so does it works? CMIIW, since I never tried it :fingers-crossed:
Click to expand...
Click to collapse
Yes, works fine bro.
koila33 said:
Hey.
I´ve made a flashable .zip for those that have problems like me in using .cmd´s on windows.
Here: http://www.mediafire.com/?k544q9t2db1lv2e
No thanks to N00BY0815.
Click to expand...
Click to collapse
So, all I do is flash this in Recovery, and I got the new CWM?
Sent from my P-970 using xda app-developers app
wessyh0 said:
So, all I do is flash this in Recovery, and I got the new CWM?
Sent from my P-970 using xda app-developers app
Click to expand...
Click to collapse
Yes.
$3nt fr0m my K4ng3d Ph0n3
Hmmmm... Recursion in "change backup format"?
P.S. ROM flashed correctly.
DaemonOnx said:
I found a video with the new CWM
http://youtu.be/t8UuS6pSa8I
Click to expand...
Click to collapse
I like! And this is the tread in XDA
CWM Touch Recovery v6.0.1.4 Touch v13.3
:highfive:
wish you could use in our black
florin250 said:
Guys maybe it sounds loke noob question , but with this new recovery it is posible to boot directly in to recovery from turned off phone, that would be very helphul especialy for those ho have bricked their phone and they do not have their pc near by (like happend to me)
sent from my Nokia 1100 with droid 4.0
Click to expand...
Click to collapse
It should be possible but we need a different bootloader. It loads the boot.img then goes to recovery so if that fail aka you have bootloop or somthing then you can't access recovery.
Sent from my LG-P970
I cannot flash anything from sd card because it shows " error mount sd card " everytime.With the 5.0.2.6 version(non touch) it works everything great.Thanks Nooby but it needs more work.
Edvin73 said:
I cannot flash anything from sd card because it shows " error mount sd card " everytime.With the 5.0.2.6 version(non touch) it works everything great.Thanks Nooby but it needs more work.
Click to expand...
Click to collapse
Yup same here...error mounting sd card.. anyways nice work:thumbup:
Disclaimer: You are not a robot. You are capable of making your own decisions. Anything you choose do to your device is your business, so anything that may happen (lost data, bricking your device, zombie apocalypse) during this process is no fault of anyone but you.
Prerequisites: Your device must be rooted with a STOCK Samsung ROM specific to the Galaxy Tab 2 7". I have tried this on my GT-P3113 and have successfully flashed it's official firmware, the P3110 JB 4.1.2 firmware for Hong Kong and Croatia models, and the P3100 JB 4.1.2 firmware for Hong Kong. So, my point is THIS SHOULD WORK FOR ALL GALAXY TAB MODELS.
This will tell you how to install ANY Samsung Updated firmware made for the Samsung Galaxy Tab 2 without a computer. BE SMART, meaning only flash the firmware that is compatible with your device!!!
Before you do anything, backup your device!!
FIRST: Do the following to get all the tools required to do this:
1. Download the following files to your SD Card:
__A. Download the official update from here . On this page in the left column, there is a dropdown menu. Choose the device you are looking for to get the list of available firmware you can download.
There is a known issue with downloading from this site and getting the file to fully download. Suggestions to make it work: try a different browser.
__B. Download from here:
____a. Mobile ODIN Lite apk from the first post and hit "thanks"
____b. MobileODIN_FlashKernel_P31xx-v2.0.apk from the fifth post and hit "thanks"
__C. Download CWM-SuperSU.zip from here and hit "thanks"
2. Install ZArchiver from the Play Store (or anything else that can de-compress a .tar file)
3. Not required, but strongly recommended to read the info on the Mobile Odin Thread. (you can do this while you wait for stuff to download)
SECOND: Do the following to get ready to perform update:
1. Using ZArchiver (or any other app you use to manage files), extract (unzip) the file you downloaded in step 1 A. Then change the filename extention from "xxxxx.tar.md5" to just "xxxxx.tar".
2. Using ZArchiver (or whatever you downloaded) extract (unzip) the file you just renamed.
3. Install the Mobile Odin Lite apk. Don't open yet.
4. Install the MobileODIN_FlashKernel apk.
5. Ensure your battery is GREATER than 50%.
THIRD: Procedure:
1. Open Mobile Odin light, and do the following:
__A. Choose "Open file..." from the list
__B. Navigate to, and choose the update file (the one you renamed to a .tar file and then unzipped) and select it.
__C. Choose "OK"
__D. Select "Recovery" from the list. On the pop up window that comes, choose "clear".
__E. Now, choose "Flash firmware" from the list and accept any prompts that come up.
- - - Your device will reboot and Mobile Odin will do it's thing- - -
2. In recovery, it may ask you to "Install untrusted zip". Do it.
----- SO FAR you have done nothing to lose user data. HOWEVER, if you are flashing a firmware not specific to your device (in other words, if you have a GT-P3113 and are flashing firmware for a P3110 or P3100), I HIGHLY RECOMMEND YOU WIPE DATA/FACTORY RESET, at this point.
3. In recovery, install the SuperSU zip you downloaded.
4. Reboot your device.
And it really is that easy. Once you reboot, you may need to make a few changes if you are flashing firmware for a model from a different region than you are in. Language, keyboard, etc...
Good Luck!!!
Or you could just use software update on the Tab since the update is now an OTA as well.
Sent from my crack smoking SGH-i777
Slavestate said:
Or you could just use software update on the Tab since the update is now an OTA as well.
Sent from my crack smoking SGH-i777
Click to expand...
Click to collapse
That will not really work with everyone. Samsung Software Update knows I modified my tab, so it will not even seach for an update and tells me why. If you are unrooted, rooted in a manner that did not advance the flash counter, or use the "Traingle Away" app, then yes, you could just do it with the on board update feature. However, using this way you can easily upgrade to the latest official software and keep root.
Official update removes su binaries and overwrites the custom recovery with stock. So, superuser and supersu become useless and you can't flash a custom recovery without su/root. To get that back requires a computer.
Will it wipe ur apps?
Sent from my GT-P3113 using xda app-developers app
---------- Post added at 04:01 AM ---------- Previous post was at 03:46 AM ----------
Oh and can somebody confirm that this works?
Sent from my GT-P3113 using xda app-developers app
YWDTEAM said:
Will it wipe ur apps?
Sent from my GT-P3113 using xda app-developers app
---------- Post added at 04:01 AM ---------- Previous post was at 03:46 AM ----------
Oh and can somebody confirm that this works?
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
Did not wipe my apps. I did it about a dozen times with a few different roms. But only count this as one confirmation that it works. So anyone else want to confirm this pls?
I am downloading the firmware. Will try tomorrow after school.
---------- Post added at 04:20 AM ---------- Previous post was at 04:18 AM ----------
Thanks man. Ur the best.
I did this on my wife's tab 2 7" rooted stock, worked perfectly. Thanks so much for sharing! All apps and data were retained. The home screens were all that was lost, so I just had to add widgets and create folders and folder contents.
rollrsk8ter said:
I did this on my wife's tab 2 7" rooted stock, worked perfectly. Thanks so much for sharing! All apps and data were retained. The home screens were all that was lost, so I just had to add widgets and create folders and folder contents.
Click to expand...
Click to collapse
True... Because the app that manages the homescreen (seclauncher.apk aka touchwiz) gets fully updated.
Yea. With the new phablet ui.
---------- Post added at 10:59 AM ---------- Previous post was at 10:55 AM ----------
Woke up early today. Gonna see if i can do it before school.
---------- Post added at 11:23 AM ---------- Previous post was at 10:59 AM ----------
Download failed.... trying again after school.
Sent from my GT-P3113 using xda app-developers app
Which JB Rom to download? There are 2 but with different regions. XAC or XAR? I have a stock US P3113.
klbjr said:
Which JB Rom to download? There are 2 but with different regions. XAC or XAR? I have a stock US P3113.
Click to expand...
Click to collapse
Weird. There wasn't two options before. Use XAR, which is US region (Cellular South... XAC region is N/A). I will update the OP.
what is the difference between this (option) and RomsWell's version of 4.1.1 ?
metalchef said:
what is the difference between this (option) and RomsWell's version of 4.1.1 ?
Click to expand...
Click to collapse
Official vs. Leak. Think of the leak version as an official beta. Not quite complete, but functional. That being said, RomsWell's version is also deodex.
LeftyGR said:
Official vs. Leak. Think of the leak version as an official beta. Not quite complete, but functional. That being said, RomsWell's version is also deodex.
Click to expand...
Click to collapse
ah yeah, deodex, right. silly me.
Plus, I've noticed that the auto-brightness actually works! so, a few minor differences, but the latter being a bug I couldn't stand.
I'll be using this instead of RomsWell's leak (d'oh). :cyclops:
metalchef said:
ah yeah, deodex, right. silly me.
Plus, I've noticed that the auto-brightness actually works! so, a few minor differences, but the latter being a bug I couldn't stand.
I'll be using this instead of RomsWell's leak (d'oh). :cyclops:
Click to expand...
Click to collapse
True that! Plus I didn't like no screen rotation on the leak...
I'm coming from this rom http://forum.xda-developers.com/showthread.php?t=2007876&page=2
but when I install that one it removes my cwm. suggestions?
F3AR420 said:
I'm coming from this rom http://forum.xda-developers.com/showthread.php?t=2007876&page=2
but when I install that one it removes my cwm. suggestions?
Click to expand...
Click to collapse
Opening post, third section step 1 D: you remove the recovery from the list of items to be flashed. Once you complete that step, on the list of all the items on the mobile odin screen - recovery will be blank. If you did do that, then cwm is not the recovery you had before starting this procedure. The link you posted is to a rom that is stock and not rooted. Did you flash it to your tab and then root/install cwm before following my steps?
Always failing. Any other link?
I can add it to dropbox later if you're still having issues...
Prolem with download.
Sent from my GT-P3113 using xda app-developers app
CAUTION!! This ROM is mostly made for developers and people interested in developing for Samsung Gear Live. I take no responsabilities for possible damages to your device.
Hi everyone.
I open a new thread here in General because I have not enough posts for posting in Development, and I don't want to spam other threads only for posting there. Moderators can move this if they want.
We have here the first Custom ROM for Samsung Gear Live: OctamodWear
Currently we have very few new features, but this is only the beginning.
Features
- OctamodWear 0.2
- KMV78Y based
- Fully deodexed
- Root
- Busybox
- WearControl, the system management app. Reboot2Recovery is gone; install WearControl from PlayStore to ensure you always have the latest version: https://play.google.com/store/apps/details?id=octathorp.wearcontrol
- ES File Explorer and Quick System Info preinstalled
- OctamodWear 0.1
- KMV78X based
- Root
- Busybox
- Reboot2Recovery, it's an app made by me that let you reboot in recovery mode (interesting for use with custom recoveries).
- ES File Explorer and Quick System Info preinstalled (mainly, for developing purposes. I included them because it was a pain to install again with each data-wipe during tests).
Important
- Superuser permissions (root) are enabled by default, without Superuser or similar app. So, whatever app that you install and require root permissions will obtain them. That's due to the fact that there is no Superuser app for Android Wear yet.
- We need unlocked bootloader in order to be able to install the ROM (fastboot oem unlock).
- This system (Android Wear) is still very recent, and there are many things we don't know, despite its similarities with Android.
Work-in-progress...
- Get a better battery consumption.
- Improve performance
- Other things I have not thought about yet
Installation
If you don't have unlocked bootloader, follow this steps:
- Connect using ADB and run "adb reboot bootloader"
- In the bootloader screen, run "fastboot oem unlock". Warning!! This will wipe the device.
- Once you have unlocked the bootloader, the next step is to flash the provided system.img, using "fastboot flash system system_octamodWear.img"
- Done!
Downloads
v0.2: http://d-h.st/cRc -- mirror -- mirror
v0.1: http://d-h.st/J6A
Stock KMV78Y: http://www.androidfilehost.com/?fid=23610159112653225
Interesting
TWRP for our smartwatch (thanks to Dees_Troy): http://forum.xda-developers.com/gear-live/orig-development/recovery-twrp-2-7-1-0-touch-recovery-t2828336
Original thread: http://www.htcmania.com/showthread.php?t=868149
I will try to help you if you need it, but please, there are a lot of pages on the web where you can get information about ADB drivers or bootloader unlocking effects, so please, use Google.
Furthermore, I don't have much free time due to work and personal life, so this ROM will not have a very fast development. My main purpose is to give people something they can start working with, and make a great development community.
Enjoy it!
You sir are a genius!
I borked my phone installing TWRP and flashing this ROM was the only way I fix my watch! Thank you!
finalbillybong said:
You sir are a genius!
I borked my phone installing TWRP and flashing this ROM was the only way I fix my watch! Thank you!
Click to expand...
Click to collapse
How is it and how did you obtain root?
Sent from a Galaxy 5 light years away
Joe0113 said:
How is it and how did you obtain root?
Sent from a Galaxy 5 light years away
Click to expand...
Click to collapse
It is pre rooted as stated above. And yes its very good. Includes a file manager, which is handy....
Dev, presumably we should not install any OTA's?
This is the best day EVER!! Thank you so very much!!
Hey @octathorp I just received an update a couple days ago and did it... I assume the update would not be compatible with this ROM, or can I still install this ROM? Thanks!
Update is KMV78Y by the way.
Hi.
I have not received the update yet, so i don't really know. It should work well, because this is only system.img, but i'm gonna update the base rom as soon as I receive the update.
One thing i forgot to post some days ago... I've made an app that lets you reboot your device into recovery or bootloader, as well as changing CPU governors. It's Reboot2Recovery replacement, and it will be included in next release. Meanwhile, you can get the app from Play Store, searching "WearControl" (sorry i cannot post links yet).
I'll update the OP.
octathorp said:
Hi.
I have not received the update yet, so i don't really know. It should work well, because this is only system.img, but i'm gonna update the base rom as soon as I receive the update.
One thing i forgot to post some days ago... I've made an app that lets you reboot your device into recovery or bootloader, as well as changing CPU governors. It's Reboot2Recovery replacement, and it will be included in next release. Meanwhile, you can get the app from Play Store, searching "WearControl" (sorry i cannot post links yet).
I'll update the OP.
Click to expand...
Click to collapse
Here you go... WearControl!
Return to Stock?
What would be the best way to return to stock? My guess would be to flash the system img that Adam Outler posted but want to make sure that I'm correct. I got excited and flashed this without backing up on TWRP first.
Hey is it possible to put the ROM in flashable form for TWRP?! Would make it much easier to install
jdellingson7 said:
What would be the best way to return to stock? My guess would be to flash the system img that Adam Outler posted but want to make sure that I'm correct. I got excited and flashed this without backing up on TWRP first.
Click to expand...
Click to collapse
I don't have tested it, but should do the trick. I don't have neither a backup from the original system...
Joe0113 said:
Hey is it possible to put the ROM in flashable form for TWRP?! Would make it much easier to install
Click to expand...
Click to collapse
That's a good idea I will try in next days, but only as a concept. If it works well, i will try to launch next update through a flashable update.zip
octathorp said:
That's a good idea I will try in next days, but only as a concept. If it works well, i will try to launch next update through a flashable update.zip
Click to expand...
Click to collapse
Awesome man! I know you said in OP that you are very busy and stuff, would be appreciated though if you got the flashable working, then I can flash stuff on the watch like I do on my phone, so easy.... instead of having to go thru ADB!
I've installed the rom but I don't see any of the included applications listed in the launcher I'm using them.
I can access them though using start tho. Anyone know how to get them into the launcher?
Octathorp, do you want a copy of my backup of KMV78Y?
---------- Post added at 08:37 PM ---------- Previous post was at 08:18 PM ----------
Link to the update from KKV81 to KMV78Y Just out of interest
skitty said:
I've installed the rom but I don't see any of the included applications listed in the launcher I'm using them.
I can access them though using start tho. Anyone know how to get them into the launcher?
Octathorp, do you want a copy of my backup of KMV78Y?
---------- Post added at 08:37 PM ---------- Previous post was at 08:18 PM ----------
Link to the update from KKV81 to KMV78Y Just out of interest
Click to expand...
Click to collapse
I use the Mini Launcher and all the icons appear that way....without going to start first!
I lost the update a few days ago, and oddly enough it popped up right away after I rebooted my watch when I installed this rom..I swiped left and it told me it was downloaded, and ready to install..I clicked ok..and it took me to TWRP and didnt install lol...anyway, all is running smooth...lets see how battery life it compared to stock
skitty said:
I've installed the rom but I don't see any of the included applications listed in the launcher I'm using them.
I can access them though using start tho. Anyone know how to get them into the launcher?
Octathorp, do you want a copy of my backup of KMV78Y?
Click to expand...
Click to collapse
That would be great, thank you. I will use it in case I don't receive Y update.
I use WearMini Launcher and have no problems at all.
Tower1972 said:
I use the Mini Launcher and all the icons appear that way....without going to start first!
I lost the update a few days ago, and oddly enough it popped up right away after I rebooted my watch when I installed this rom..I swiped left and it told me it was downloaded, and ready to install..I clicked ok..and it took me to TWRP and didnt install lol...anyway, all is running smooth...lets see how battery life it compared to stock
Click to expand...
Click to collapse
Battery life should be the same as stock, as there are no power optimizations yet, but you could try WearControl with powersave mode instead.
octathorp said:
That would be great, thank you. I will use it in case I don't receive Y update.
I use WearMini Launcher and have no problems at all.
Click to expand...
Click to collapse
See your PM's
I use wear mini launcher too but cant get es file explorer, quick system info or reboot2recovery to show. Very odd
I've updated first post with new OctamodWear 0.2 version. Sorry it is not an update.zip yet, but i'm working on it
thank ya!!! The dowload is painfully slow ...around 2 hours?? The first time I got it,. the md5s didnt match
First thanks for the first custom rom for the Gear Life!
Does anybody have a mirror? Dev Host is really slow, 1 hour to download 146mB :silly:
Would be much appreciated :highfive:
I dont actually use any file sharing sites myself
I'm so sorry but this thread has already moved to http://forum.xda-developers.com/redmi-note/development/rom-resurrection-remix-redmi-note-4g-t3393516 ...since I'm retired in few months ago ^_^
Thanks to @ashishkotnala29 for help me to continue dior project for Official Resurrection Remix ^_^
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
peepee999 said:
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
Click to expand...
Click to collapse
glad to hear that, on next build will came out for v5.6.6 .
will upload it ASAP
Sent from my HM NOTE 1LTE using Tapatalk
Wow so excited! Waiting patiently! Thank you
Sent from my HM NOTE 1LTE using Tapatalk
that facebook apk work?
So far it is a very nice rom in my use of it. Tested camera, flash, gps, speakers, notification lights, many apps (including installing facebook app and logging in, but not actually using it more than that), etc. So far so good. Everything seems to be working. Thank you very much msfkonsole for making it available.
(Edit: backlights on soft buttons are working fine; no problem.)
yeah,,facebook work fine..
the loud speaker when call/get call not loud as always..it seem normal or without use load speaker
Its good news.....thanx mate
Sent from my Redmi Note 3 using Tapatalk
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Fantastic ROM
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
I want to know how to download it?
Sent using XDA One
kul.rohan said:
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Click to expand...
Click to collapse
1. The Status bar is definitely transparent on my phone. (Did you do a clean install?)
2. I also haven't gotten the weather to work.
3. Lockscreen wallpaper does not change for me either.
I'd also like to be able to adjust the soft buttons backlight brightness like I could in CM12.1.
But all those are only very minor problems, and this is proving to be a very good rom for me.
---------- Post added at 02:37 PM ---------- Previous post was at 02:27 PM ----------
AdliHebat said:
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
Click to expand...
Click to collapse
Try this: https://mega.nz/#!I8FzHTiQ!ptfcpHmTpLo7l-xH_vDySpLVasaXDvaeyzAIT578Qjo If that doesn't work, maybe download it again and put it in the root of the internal memory. I don't know what else to suggest.
Edit: I just installed latest 5.6.6 using Philz Touch with rom in root folder of external SD card. No problem.
bingoyang said:
I want to know how to download it?
Sent using XDA One
Click to expand...
Click to collapse
Try this to get the newest version 5.6.6: https://basketbuild.com/devs/resurrectionremix/dior You will also need this kernel patch: https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip. Just flash the patch after your flash the rom.
nz_mincemeat said:
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Click to expand...
Click to collapse
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
Edit: reboot solved that problem, but I don't know why it happened in the first place.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
Nasrun said:
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Click to expand...
Click to collapse
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
twrock said:
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
Click to expand...
Click to collapse
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Nasrun said:
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Click to expand...
Click to collapse
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
twrock said:
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
Click to expand...
Click to collapse
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Nasrun said:
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Click to expand...
Click to collapse
Hmm, strange. This file, edgefix_20160403.zip, right?
I'm using CWM based Philz Touch Recovery, but I don't know if that is the issue or not. If you were able to flash the rom, I can't see why you can't flash the edgefix update.
I'm having a few weird troubles though. Twice today I had the screen freeze for a time, and then when it came back, it was jumping around as if an invisible finger was touching all over the screen randomly. I had to force a reboot both times. That's not a minor bug. Also, I've had it turn on in my pocket and start to do pocket-dialing. At least I can hear it when that starts. Is there a setting to eliminate pocket dialing?
Edit: Ah, I see that 20160406 is released. Maybe I'll give that a try and see if it still has those problems.