i have gt p1000 n my problems now touch screen not working sometimes.. but after i turn it off n on again,its work.. but after 5mnt it cant work again..
yuzrawk said:
i have gt p1000 n my problems now touch screen not working sometimes.. but after i turn it off n on again,its work.. but after 5mnt it cant work again..
Click to expand...
Click to collapse
Man, I have the same strange issue!! did you find a solution?
In my case, I have to restart many times until it start to work again... very odd!!
I tried to check for dust around the screen but it is all clean, no falls, no hits on any part of the p1000 body...
B. Regards,
Marcel
yuzrawk said:
i have gt p1000 n my problems now touch screen not working sometimes.. but after i turn it off n on again,its work.. but after 5mnt it cant work again..
Click to expand...
Click to collapse
try to calibrate it. . .try nook calibrate in the market
???
what happen to this trend have you already fix this problem???
Any updates here ?
I am having the exact same problem, I have tried everything, rooting, installed CM, re-flashed stock ROM, tried this Nook Calibrate app too, but still no luck, plz someone help
Same problem here with my GT-P1010. No response at all. Help please.
Touch screen works fine for some time after every boot, but after 2-3 minutes it stops responding, so I guess touch screen is not faulty it must have to do something with software or maybe digitizer problem
yuzrawk said:
i have gt p1000 n my problems now touch screen not working sometimes.. but after i turn it off n on again,its work.. but after 5mnt it cant work again..
Click to expand...
Click to collapse
himanshujdr said:
I am having the exact same problem, I have tried everything, rooting, installed CM, re-flashed stock ROM, tried this Nook Calibrate app too, but still no luck, plz someone help
Click to expand...
Click to collapse
Feastwood said:
Same problem here with my GT-P1010. No response at all. Help please.
Click to expand...
Click to collapse
himanshujdr said:
Touch screen works fine for some time after every boot, but after 2-3 minutes it stops responding, so I guess touch screen is not faulty it must have to do something with software or maybe digitizer problem
Click to expand...
Click to collapse
After so many user having this problem , any updates for the fix ?
In my tablet the motherboard was damaged, i supossed the problem it was the touchscreen but it's ok.
Same problem-replaced the digitiser but still.....
Feastwood said:
In my tablet the motherboard was damaged, i supossed the problem it was the touchscreen but it's ok.
Click to expand...
Click to collapse
Well,how did you get it fixed or you just condemned it ?I had the same problem and thought it was due to digitiser and had it replaced -but no avial same problem...so do I have to discard mine ? any solution please?
(PS:The whole problem started after I rooted and installed CM 10.1 with which it worked fine for a month-and then it started-went back to stock rooted unrooted multiple time and now replace the d'er too...I am now clueless)
Anyone having the issue after touchscreen replacement?
Sent from my SGT P1000/CM 11
Related
hello all,
I got a problem , when update to 7.5 (from version 7.0) i got a black screen and after that nothing. Waited for half an hour but still nothing. Now my Galaxy S cant start up , not even the starting screen.It seems that I have taken the wrong update , itake this one(darkytt3r_v7.5_BLN_voodooOff). The 3button way doesn't work (it did before). And can't get in download mode.
So I have only a black screen and nothing else. Battery replace doesn't work.
Does someone have an idea.
Greetz
so you can't even see the 'galaxy s gt i9000'-screen?
No cant see that.
mightyfreak said:
No cant see that.
Click to expand...
Click to collapse
i think its totally bricked man, i think the only solution is to go to samsung for repair.
What caused the black screen?
The wrong ROM installed. Does a jig work for it?
Greetz
http://forum.xda-developers.com/showthread.php?t=890243
The main discussion on this is in the link above
mightyfreak said:
The wrong ROM installed. Does a jig work for it?
Greetz
Click to expand...
Click to collapse
i think you should try the homemade jig
Hello Xda members , i have just upgraded my galaxy note from gingerbread to official ICS thru samsung kies , everything went smoothly after upgraded , but my note's screen keeps lighting up and dim for no reason on lock mode , sometimes it continues for several minutes then goes off ,sometimes its like a rotating cycle , it would come back after each 30 minutes...there is no background apps running . i have no such problem using the gingerbread..please help...
westsynd said:
Hello Xda members , i have just upgraded my galaxy note from gingerbread to official ICS thru samsung kies , everything went smoothly after upgraded , but my note's screen keeps lighting up and dim for no reason on lock mode , sometimes it continues for several minutes then goes off ,sometimes its like a rotating cycle , it would come back after each 30 minutes...there is no background apps running . i have no such problem using the gingerbread..please help...
Click to expand...
Click to collapse
I have the same problem, although i didn't upgrade to ICS and still running the original Gingerbread as bought.
I wish someone has a solution for this problem .
Have you tried to factory reset it?
jonpaslim said:
Have you tried to factory reset it?
Click to expand...
Click to collapse
Thank you "jonpaslim" for your prompt reply.
Actually I didn't.
Because I'm worry about getting bricked by factory reset.
And also I'm not sure that I can do it the right way.
.
wisenada said:
Thank you "jonpaslim" for your prompt reply.
Actually I didn't.
Because I'm worry about getting bricked by factory reset.
And also I'm not sure that I can do it the right way.
.
Click to expand...
Click to collapse
If your running in gingerbread it will not brick your phone. Im directing this answer to you when you said that you are still in gingerbread. If your on ics yes it will. Im sorry i have to be spicific next time.
jonpaslim said:
If your running in gingerbread it will not brick your phone. Im directing this answer to you when you said that you are still in gingerbread. If your on ics yes it will. Im sorry i have to be spicific next time.
Click to expand...
Click to collapse
Thank you so much for your kind support and follow up, I will try it and get back with the result.
Till then thanks again
.
Hi guys
I performed a factory reset, and everything is ok now (ok for 24 hours till now).
Although I didn't know what was the reason, But I'm happy that my Note is doing good.
Thank you for support, and special thanks to "jonpaslim".
Regards
.
wisenada said:
Hi guys
I performed a factory reset, and everything is ok now (ok for 24 hours till now).
Although I didn't know what was the reason, But I'm happy that my Note is doing good.
Thank you for support, and special thanks to "jonpaslim".
Regards
.
Click to expand...
Click to collapse
Im glad to help you. Thank you also.
this problem is called kernel wake lock.. you must downgrade to gb, do a full wipe then install a fresh ics via kies or odin, after booting up in ics go into your recovery mode holding volume up + home button + power key and clear your cache 4 time in a row this will solve your issue and maybe increase your battery life if you having any problem on ics related to battery backup
Hello...this is my first post.
IM using Xperia z and my screen is acting up. It responds without me touching it. Flashed it with cm10.1 but problem Persists. Please help
theBlackmind said:
Hello...this is my first post.
IM using Xperia z and my screen is acting up. It responds without me touching it. Flashed it with cm10.1 but problem Persists. Please help
Click to expand...
Click to collapse
...did you dip it in the water? try to go back to 4.1.2 maybe a bug in CM10.1, the only thing to do is sent it in man, sounds like a hardware problem.
Thanks for the quick reply. I think the cm 10 is fone. Was already having the problem before I flashed it. Guess it's hardware then. Will just have to send it in
theBlackmind said:
Thanks for the quick reply. I think the cm 10 is fone. Was already having the problem before I flashed it. Guess it's hardware then. Will just have to send it in
Click to expand...
Click to collapse
yeap good luck, flash bak to 4.1.2 first, if they boot it up and see 4.2.2 they might give you ****
appoint inlderti
Quick question......I noticed in Recovery mode show log..
Cache wipe complete
Can't partition non vfat: datamedia
Can't partition non vfat: auto
Can't format unknown volume: /Emmc
Does that mean something
xpiria z touch screen not working
since last month my xpiria z don't turn on.it keep booting logo and turn off suddenly .after that i flash a vershion 10.5.A.0.233 rom ,but problem was still there.after that i broght it to phone repair shop after the flash agin the phone but problem dosesn't slove .after i change the battry without removing first battry ,i only do unplug the battry conector and plug new battry to port.after that phone turn on properly but don't work touch screen.please give me a solution .
may be it from the screen film
Hi all,
So I have an S3 i9305 sitting around doing nothing. Thought I'd play with it. I had and older build of Miui running on it fine.
Decided to put on CM11, and that's when my issues started. The phone boots, but as soon as I get to any sort of setup screen I can touch anything on the screen. The physical buttons work fine, but the screen isnt.
I flashed a touch CWM and TWRP, both of which loaded fine by I couldnt touch anything.
I flashed back to stock kernel and stock rom
Kernel from - http://forum.xda-developers.com/galaxy-s3/development-i9305/recovery-odin-flashable-tar-t1971265
ROM from - http://forum.xda-developers.com/gal...5/roms-updated-17-08-2013-pre-rooted-t1942150
Still unresponsive touch.
Anything else I can try before I write this off as bricked
Thanks!
pieinthesky10 said:
Hi all,
So I have an S3 i9305 sitting around doing nothing. Thought I'd play with it. I had and older build of Miui running on it fine.
Decided to put on CM11, and that's when my issues started. The phone boots, but as soon as I get to any sort of setup screen I can touch anything on the screen. The physical buttons work fine, but the screen isnt.
I flashed a touch CWM and TWRP, both of which loaded fine by I couldnt touch anything.
I flashed back to stock kernel and stock rom
Kernel from - http://forum.xda-developers.com/galaxy-s3/development-i9305/recovery-odin-flashable-tar-t1971265
ROM from - http://forum.xda-developers.com/gal...5/roms-updated-17-08-2013-pre-rooted-t1942150
Still unresponsive touch.
Anything else I can try before I write this off as bricked
Thanks!
Click to expand...
Click to collapse
1 more thing...get the RIGHT firmware from HERE - get the one for your country.....flash that and do a factory reset after it..and wipe cache....
happened to a friend with galaxy ace....but phone was back to normal after flashing stock firmware from samsung.
Thanks mate!
So I tried some more flashes, no luck.
Took the phone to the local repair place, they told me the screen is broken. They attached a different temp screen and it worked. They attached my screen to a different phone and it didn't work.
Quoted me $189 to replace the screen
Sent from my Nexus 4 using XDA Premium 4 mobile app
Im sure i flashed wrong kernel.
Enviado do meu GT-I9300 através de Tapatalk
SnowPluralism said:
Im sure i flashed wrong kernel.
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
Dont think so... tired a few from the SamMobile site with no success. The setup screen shows up fine - but cannot continue with the setup as I cannot touch the screen.
pieinthesky10 said:
Dont think so... tired a few from the SamMobile site with no success. The setup screen shows up fine - but cannot continue with the setup as I cannot touch the screen.
Click to expand...
Click to collapse
so it is a hardware problem....not software - you can flash whatever you like...won't solve it...
if you like the phone consider repairing it...
spiderman07 said:
so it is a hardware problem....not software - you can flash whatever you like...won't solve it...
if you like the phone consider repairing it...
Click to expand...
Click to collapse
Thanks for your help
I am having the same problem.
Even after installing new firmware.
The phone boots, screen is working. But the touch is not responding... I also did a factory reset + wipe cache.
Before that it was on CyanogenMod (4.2.2) and the screen was working properly.
What else can I do TT ?
I changed the front panel.
And it is working perfectly well...
How can modification to the software affect the hardware and brake the digitizer/touch function ?
via kernel man...kernel is the interface between software and hardware....
maybe a frequency or voltage got changed by kernel and something happened....no one can know for sure...
gidam said:
I changed the front panel.
And it is working perfectly well...
How can modification to the software affect the hardware and brake the digitizer/touch function ?
Click to expand...
Click to collapse
When wrong kernel is flashed, the touch sensor get disconnected and unrecongnised by the phone. Thats why the hardware is broken even though correct kernel is flashed afterwards. Best thing to do is replace the screen instead of trying over and over again.
Hope it helps
I use the Samsung GT 19305 LTE myself.
Hello every one my Galaxy ace is running fine
But when i reboot or power on my phone samsung.com screen comes after this galaxy ace gts5830 screen come then phone restart itself
In 2 or 3 attempts phone could start normaly
This happens some time not in every boot
This is not bootloop and my phone is working gud with cm7
It seems my motherboard or bootloader is going to dead in some days
What would be the cause of this issue
Any suggesion to fix it ?
arshad522 said:
Hello every one my Galaxy ace is running fine
But when i reboot or power on my phone samsung.com screen comes after this galaxy ace gts5830 screen come then phone restart itself
In 2 or 3 attempts phone could start normaly
This happens some time not in every boot
This is not bootloop and my phone is working gud with cm7
It seems my motherboard or bootloader is going to dead in some days
What would be the cause of this issue
Any suggesion to fix it ?
Click to expand...
Click to collapse
What rom are you using now? Have you installed any scripts?
mahithm said:
What rom are you using now? Have you installed any scripts?
Click to expand...
Click to collapse
tried some cm7 based rom and did not install any script
i think this is not rom problem
arshad522 said:
tried some cm7 based rom and did not install any script
i think this is not rom problem
Click to expand...
Click to collapse
If you are sure that it is not rom related, then must be some hardware related problem
mahithm said:
If you are sure that it is not rom related, then must be some hardware related problem
Click to expand...
Click to collapse
i also think so beacause its 2.5 years old phone
My old 5830 has started locking up and acting wierd too. It was fine on a stock kernel so I think its software related.
Start over from scratch if it bothers you that much. Flash a stock rom and then remod it.
Sent from my GT-I9300 using Tapatalk
arshad522 said:
Hello every one my Galaxy ace is running fine
But when i reboot or power on my phone samsung.com screen comes after this galaxy ace gts5830 screen come then phone restart itself
In 2 or 3 attempts phone could start normaly
This happens some time not in every boot
This is not bootloop and my phone is working gud with cm7
It seems my motherboard or bootloader is going to dead in some days
What would be the cause of this issue
Any suggesion to fix it ?
Click to expand...
Click to collapse
DE-bloat your rom or flash a custom STOCK rom if you want to keep in stock and forget samy's stupid issues
shivadow said:
My old 5830 has started locking up and acting wierd too. It was fine on a stock kernel so I think its software related.
Start over from scratch if it bothers you that much. Flash a stock rom and then remod it.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
it happens only some time if problem continues i will do this as u said
thnks