[Q] Pdroid,I need help. - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey,guys
I tried to get .zip files for two times,from Arky's ROM 2.1 and Moonrom V4.0,then flash them with recovery.but no work.
I installed JDK6,and downloaded Pdroidpatcher v1.32.anybody can help me?thanks a lot.
My Phone is sanmung GT I9001
and more question:after I backup rom with recovery,how to change it into .zip file.thank you very much.

You tried to install it with CWM or with stock recovery?

annqx said:
You tried to install it with CWM or with stock recovery?
Click to expand...
Click to collapse
yeah,buddy....I using CWM_5.0.2.8-2

Eric_cn said:
Hey,guys
I tried to get .zip files for two times,from Arky's ROM 2.1 and Moonrom V4.0,then flash them with recovery.but no work.
I installed JDK6,and downloaded Pdroidpatcher v1.32.anybody can help me?thanks a lot.
My Phone is sanmung GT I9001
and more question:after I backup rom with recovery,how to change it into .zip file.thank you very much.
Click to expand...
Click to collapse
kindly please direct your query to Arky's thread and the Moonrom thread with regards to flashing the respective roms... lets help make the DEV section clean.... Thanks....
To answer your question : as per instructions on those threads... make sure you flashed CWM recovery or FeaMod recovery (1.2 or 1.4) before you can flash any CWM based rom. I think moonrom v.4 uses the new KQB rom so you have to flash it first via odin then install CWM / FeaMod recovery to flash the said rom...

Related

[Q] [ I9001 ] Restore stock recover

Hi all guys!
I've searched into the whole forum and Internet but I cannot find an answer to my question.
After the FeaMod Recovery installation I know I can return to stock recovery by installing a stock ROM. This is a great thing.
But what about restoring stock recovery without installing the whole ROM?!?! Is it possible?!
Sorry if my question has an answer in the forum yet... I really can't find it.
Thank u very much!!!
If you extract original recovery from a stock rom you can dd it to your device. Or you take the stock recovery.img and modify the flashable cwm zip by replacing cwm recovery.img with stock recovery.img and flash that with cwm.
Sent from my GT-I9001 using XDA App
Hi. First of all TY for ur reply.
Then for this I need some help 'cause I've read hundreds of guides and wikies but I'm not really a master!
1) Ur first tip seems a little dangerous! Anyway how can I extract the recovery from stock ROM with dd?! Has to be the phone rooted?! Or adb it's enough?!
2) Ur second tip seems to be better! But where I can take the stock recovery.img?
And then, after replacing it in the CWM zip I've to do something else before flashing zip from sdcard?!
Really thank you for your tips!
The attached file should reflash the stock XXKPU recovery to your 9001. Tested and works with FeaMod 1.4.
Hi wintel.
Thanks for your reply.
Only last question, I promise!!!
May I use the file u posted with every ROM I've installed or it has to be used only with XXKPU ROM?!?!
Sorry, but I quiet new with Galaxy world!!!
mylostnick said:
Hi wintel.
Thanks for your reply.
Only last question, I promise!!!
May I use the file u posted with every ROM I've installed or it has to be used only with XXKPU ROM?!?!
Sorry, but I quiet new with Galaxy world!!!
Click to expand...
Click to collapse
the stock recovery is the same and should be ok for all roms.
this issue was already discussed in I9001 Q&A thread and in the Feamod thread, wintel made it easy for u and gave u a flashable zip,u could replace the recovery.img also through adb or terminal emulator with dd code.(assuming the recovery.img is in the root of internal sd). (keep this code somewhere in case u need it another time)
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
reboot
odin
just flash a stock rom
pascal1990 said:
just flash a stock rom
Click to expand...
Click to collapse
DID YOU READ THE FIRST POST AT ALL?????
mylostnick said:
.... I know I can return to stock recovery by installing a stock ROM. This is a great thing.
But what about restoring stock recovery without installing the whole ROM?!?! Is it possible?!....
Click to expand...
Click to collapse
Please read before posting
pls help
wintel_mac said:
The attached file should reflash the stock XXKPU recovery to your 9001. Tested and works with FeaMod 1.4.
Click to expand...
Click to collapse
I met a problem which I can not get out my phone SGS i9001. I tried to do an upgrade to v4 android. when he stayed on the phone for almost an hour with the CyanogenMod logo and not do anything. Now when I turn my phone straight into recovery mode. and down the screen I write this: CMW-based Recovery v5.5.0.4 and E: can t mount / cache / recovery / command.
E: can t mount / eMMC. I mention that I can put it in download mode. but every time I tried to do something with odin I failed. please and hope you can help me. Thanks in advance.sorry for my English

Help please

NEWBIEEEEEEEEEEE HERE (((((((
I am on my Stock ROM 2.3.6 (ROOTED)
Heard that next thing after rooting is to flash CWM , and i googled for it for hours and read few versions have error and few don't
can someone help me out with the best version of CWM which is to be flashed on my SGM .and what is to be done after flashing CWM ....
Help pleaseeeeeeeeeeee .................
Go to "xda playground" thread in mini general section.. some one has posted a link to download cwm.. download it,put in your sd card,go to stock recovery and flash the zip.. you will have cwm recovery installed in your mobile..
Then try any of the roms from galaxy mini android development section,download it and install it using cwm recovery.. installation procedure will be there on each rom thread
Rajesh_m said:
Go to "xda playground" thread in mini general section.. some one has posted a link to download cwm.. download it,put in your sd card,go to stock recovery and flash the zip.. you will have cwm recovery installed in your mobile..
Then try any of the roms from galaxy mini android development section,download it and install it using cwm recovery.. installation procedure will be there on each rom thread
Click to expand...
Click to collapse
Download the file CWM 5.2.0.8 directly to my SGM and flash ?
Errr ..... Read somewhere that CWM must be flashed using ODIN [PC]
As am newbie I am bit confused and scared .....
I just have a rooted SGM running GB-2.3.6, no CWM nothing I have on my Mini .....
So please make it clear is it safe to directly download CWM 5.2.0.8 to my phone and flash it ?
Use odin to flash cwm.. go to the link and follow the instructions..
forum.xda-developers.com/showthread.php?t=1342190
Sent from my GT-S5570 using xda app-developers app
You can flash CWM with Stock Recovery. I have done it before.
Go and try it !
F4uzan said:
You can flash CWM with Stock Recovery. I have done it before.
Go and try it !
Click to expand...
Click to collapse
Ya flash via stock recovery is possible.. even i have mentioned it.. but let him use odin,as there are many guides teaching how to flash cwm via odin are available..
Rajesh_m said:
Ya flash via stock recovery is possible.. even i have mentioned it.. but let him use odin,as there are many guides teaching how to flash cwm via odin are available..
Click to expand...
Click to collapse
"HIM "? ? ? ? ? ?
Its "HER" here .......
Cathy Juavnce said:
"HIM "? ? ? ? ? ?
Its "HER" here .......
Click to expand...
Click to collapse
Oopz sorry for that anyway u tried flashing cwm?
Well the main question is that what do you feel more comfortable, CWM or ODIN?
Wow ! A chick modding it's own phone, it's rare to see that. That means you have a courage to do it...
Well...
About CWM, you can flash from either ODIN or Stock Recovery. There's no differences in the result.
Theawesomeguy4 said:
Well the main question is that what do you feel more comfortable, CWM or ODIN?
Click to expand...
Click to collapse
CWM
F4uzan said:
Wow ! A chick modding it's own phone, it's rare to see that. That means you have a courage to do it...
Well...
About CWM, you can flash from either ODIN or Stock Recovery. There's no differences in the result.
Click to expand...
Click to collapse
Thank You for your reply ....
will flash it sooner .
Then just go to recovery mode, update zip from SD card and hit the CwM file!
As easy as ABC!

Odin flashable recovery?

Hi guys,
Is there an Odin flashable recovery for i9000?
Thank you
Sent from my GT-I9505
You need to get your phone on the latest stock with root & CWM?
DumF0rGaming said:
You need to get your phone on the latest stock with root & CWM?
Click to expand...
Click to collapse
No, basically I wanted to start TOTALLY fresh with a new ROM so I went to CWM and formatted EVERYTHING!! I was half asleep when I did it and formatted my SD card (where my ROM was saved lol) I also formatted boot, so I have no recovery anymore either.
What I'm wanting is a custom recovery I can flash using Odin.
So CWM recovery in a .tar format.
Thanks for the help!
Obagleyfreer said:
What I'm wanting is a custom recovery I can flash using Odin.
So CWM recovery in a .tar format.Thanks for the help!
Click to expand...
Click to collapse
So attached one may help you a lot. It works even for JW9! All you need to do - it's install the latest stock ROM first
DumF0rGaming said:
So attached one may help you a lot. It works even for JW9! All you need to do - it's install the latest stock ROM first
Click to expand...
Click to collapse
But this isn't a recovery is it?
It's just a root package for stock firmware?
All I'm looking for is a custom recovery (like CWM) that I can flash in Odin so I can get a recovery back on my phone and flash CM
This on contains Root+CWM3 for stock ROM

[Q] Downgrade CWM from 6.??? to 5.???

Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
You can either flash stock rom via odin on comp and reroot, or download and install mobile odin ported to our device. And then flash the odin flashable cwm.tar file through mobile odin.
Sent from my GT-S5830 using Tapatalk 2
Downgrade
csjjpm said:
Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
Click to expand...
Click to collapse
There is my solution:
Go to CWM 6 recovery and install:
- downgrade to CWM 4 - link here
- reboot your phone and go to recovery and install:
- upgrade to CWM 5 - link here
- press thanks if i helped you
csjjpm said:
Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
Click to expand...
Click to collapse
You cannot downgrade from android 4.x to android 2.x. That's because 4.0.4 and higher roms have a different bootloader. So don't try to flash gingerbread over kitkat, but if you tried and your phone didn't bricked let me know!!!
rapkiller91 said:
You cannot downgrade from android 4.x to android 2.x. That's because 4.0.4 and higher roms have a different bootloader. So don't try to flash gingerbread over kitkat, but if you tried and your phone didn't bricked let me know!!!
Click to expand...
Click to collapse
Bro, he meant to downgrade the recovery mod and not the android version. CWM stands for ClockWorkMod Recovery Mod. He just wants to downgrade from CWM6 to CWM5. Hope I Helped
mahithm said:
Bro, he meant to downgrade the recovery mod and not the android version. CWM stands for ClockWorkMod Recovery Mod. He just wants to downgrade from CWM6 to CWM5. Hope I Helped
Click to expand...
Click to collapse
I know well what CWM stand for and what it is. I know he was asking how to downgrade from CWM 6 to CWM 5 but he was asking also for a downgrade from KitKat to Gingerbread. I just said that it could brick the phone.
For the CWM downgrade you must:
1) reboot in recovery mode
2) install the latest PX recovery for galaxy ace
3) reboot recovery
4) install CWM5
5) reboot recovery
6) done!
Inviato dal mio K00F utilizzando Tapatalk
rapkiller91 said:
I know well what CWM stand for and what it is. I know he was asking how to downgrade from CWM 6 to CWM 5 but he was asking also for a downgrade from KitKat to Gingerbread. I just said that it could brick the phone.
For the CWM downgrade you must:
1) reboot in recovery mode
2) install the latest PX recovery for galaxy ace
3) reboot recovery
4) install CWM5
5) reboot recovery
6) done!
Inviato dal mio K00F utilizzando Tapatalk
Click to expand...
Click to collapse
Actually downgrading from KitKat to Gingerbread will not brick the phone as long as you flash it through odin. Then again flashing any Gingerbread custom rom will not brick your phone as they are made to work only on CWM5. Hence flashing Gingerbread custom rom through CWM6 will only give you errors. Its always safe to install Gingerbread stock rom using odin. Here is the link on how to install stock rom using odin along with all firmwares and drivers (check "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin/
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Also if you still want to use KitKat, then you can use the KitKat version flashable through CWM5 by @Salim El Yabouri. Here is the link,
KitKat for all
Hope I Helped
Great help thank you
hubert.3346 said:
There is my solution:
Go to CWM 6 recovery and install:
- downgrade to CWM 4 - link here
- reboot your phone and go to recovery and install:
- upgrade to CWM 5 - link here
- press thanks if i helped you
Click to expand...
Click to collapse
Sorry I hadn't got back sooner but busy with six kids
Thanks for your great help this was easy to do.
Paul
csjjpm said:
Sorry I hadn't got back sooner but busy with six kids
Thanks for your great help this was easy to do.
Paul
Click to expand...
Click to collapse
Next time you can also use the following tutorial tailor-made for such problems,
[TUTORIAL] HOW TO GO BACK FROM CWM 6.x TO CWM 5.x
Hope I Helped
I think these is s5830i Section not s5830 's.
Hitesh2626 said:
I think these is s5830i Section not s5830 's.
Click to expand...
Click to collapse
Already asked FM to move this to right section :good:
i want to downgrade from CWM 6.0.3.3 to 6.0.2.8 please help
csjjpm said:
Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
Click to expand...
Click to collapse
Hi There,
you can flash the CWM reecovery v5 using Odin or fastboot. If you need help flashing it do consalt me. Thanks
downgrade successful
hubert.3346 said:
There is my solution:
Go to CWM 6 recovery and install:
- downgrade to CWM 4 - link here
- reboot your phone and go to recovery and install:
- upgrade to CWM 5 - link here
- press thanks if i helped you
Click to expand...
Click to collapse
1. I proceeded as you said, to downgrade from 6.0.4.6 to 5.0.2.6.
It worked.
Thank you very much indeed.
2. Do you know if there is any 6.0.4.7 zip or 6.0.4.8 zip for s5830?
Mardon's 6.0.5.3_1
Dr.Ghobar said:
1. I proceeded as you said, to downgrade from 6.0.4.6 to 5.0.2.6.
It worked.
Thank you very much indeed.
2. Do you know if there is any 6.0.4.7 zip or 6.0.4.8 zip for s5830?
Click to expand...
Click to collapse
Well i mentioned it earlier in a post but still instead of upgrading to 6.0.4.7 mardon's new recovery has more feastures: Check this link.
But I recommend 5.0.2.6 as it can flash almost all zips without any problem whatsoever.
As written on mardon's page that 6.0.5.3_1 was ported to Ace for flashing his kk custom rom
anand44 said:
Well i mentioned it earlier in a post but still instead of upgrading to 6.0.4.7 mardon's new recovery has more feastures: Check this link.
But I recommend 5.0.2.6 as it can flash almost all zips without any problem whatsoever.
As written on mardon's page that 6.0.5.3_1 was ported to Ace for flashing his kk custom rom
Click to expand...
Click to collapse
Is there any TOUCH custom recovery for s5830 with official 2.3.5 rom?
Not fully supported
Dr.Ghobar said:
Is there any TOUCH custom recovery for s5830 with official 2.3.5 rom?
Click to expand...
Click to collapse
I think cwm 6.0.4.8/philz edition will work. @Dr.Ghobar you know it right? you did try it.
anand44 said:
I think cwm 6.0.4.8/philz edition will work. @Dr.Ghobar you know it right? you did try it.
Click to expand...
Click to collapse
Thank you.
About your remarks:
1. cwm 6.0.4.8/philz edition did not work. a) it has mount problems; b) it prevented android 2.3.5 from booting.
2. You, before editing, said recovery is independent of the rom on the phone. If this is the case, then why all cwm 6 versions are in trouble with /system on my phone? and why mardon said that won't work with stock rom?
Dr.Ghobar said:
Thank you.
About your remarks:
1. cwm 6.0.4.8/philz edition did not work. a) it has mount problems; b) it prevented android 2.3.5 from booting.
2. You, before editing, said recovery is independent of the rom on the phone. If this is the case, then why all cwm 6 versions are in trouble with /system on my phone? and why mardon said that won't work with stock rom?
Click to expand...
Click to collapse
Cwm 6 or 5 cannot mount /system /data or /cache bcoz cwm cannot handle samsung's filesystem rfs used in galaxy ace. This problem has no solution except changing to custom rom or using cfroot kernel which has ability to change fs type to ext4.also it is quite better than stock kernel. Proceed with caution. Also i think you need android 2.3.6 for cf root kernel. You can download official android 2.3.6 from sammobile.com and cf root kernel for s5830
from Google. Also do try cwm 5.0.2.6 once it can work.
And btw flashing 2.3.6 will wipe data cache root everything.
If you choose to flash 2.3.6, try cf auto root kernel. Cm roms use ext4 by default with quite better kernels.
anand44 said:
Cwm 6 or 5 cannot mount /system /data or /cache bcoz cwm cannot handle samsung's filesystem rfs used in galaxy ace. This problem has no solution except changing to custom rom or using cfroot kernel which has ability to change fs type to ext4.also it is quite better than stock kernel. Proceed with caution. Also i think you need android 2.3.6 for cf root kernel. You can download official android 2.3.6 from sammobile.com and cf root kernel for s5830
from Google. Also do try cwm 5.0.2.6 once it can work.
And btw flashing 2.3.6 will wipe data cache root everything.
If you choose to flash 2.3.6, try cf auto root kernel. Cm roms use ext4 by default with quite better kernels.
Click to expand...
Click to collapse
1. CWM 5.0.2.6 does not have any mounting problem.
2. I do not want changing to custom rom.
3. Can "cfroot kernel" be used along with my official 2.3.5 rom?
4. What caution do you mean when you say "Proceed with caution"?
5. If I install 2.3.6, then will I have "cfroot kernel" and consequently can I install CWM 6 without mounting problem?

[Q] Doubts about Recovery

Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.
samnettt said:
Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.
Click to expand...
Click to collapse
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.
installing custome rom
Gw|n said:
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.
Click to expand...
Click to collapse
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now
samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.
Gw|n said:
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.
Click to expand...
Click to collapse
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.
Aronuser said:
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now
Click to expand...
Click to collapse
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you
samnettt said:
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.
Click to expand...
Click to collapse
That's NANDROID backup
samnettt said:
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you
Click to expand...
Click to collapse
Here I uploaded it for you
https://www.dropbox.com/s/9082qxym9ysukxc/cm11.0_golden.maclaw.20140323.zip

Categories

Resources