Related
Hello I am having an issue with wireless tether 1.6. On any of the sprint 2.1 roms I try it freezes my phone and reboots when I stop tethering. Was wondering if there was a fix I didn't see when I looked around. It works fine until I go to stop. The only Rom I can get it to work is the my touch 3g port.
Libinjo said:
Hello I am having an issue with wireless tether 1.6. On any of the sprint 2.1 roms I try it freezes my phone and reboots when I stop tethering. Was wondering if there was a fix I didn't see when I looked around. It works fine until I go to stop. The only Rom I can get it to work is the my touch 3g port.
Click to expand...
Click to collapse
Sounds like you have bigger problems if the only rom you can get to work is the mytouch port.
When you flash a rom, go into the Wipe menu and wipe everything except battery stats.
If it still doesn't boot repartion the SDcard to Fat ONLY.
If it still doesn't boot, you have some issues somewhere.
I took care of a lot of stupid issues I was having by running the 2.1 RUU and re-rooting and flashing the rom again.
Libinjo said:
Hello I am having an issue with wireless tether 1.6. On any of the sprint 2.1 roms I try it freezes my phone and reboots when I stop tethering. Was wondering if there was a fix I didn't see when I looked around. It works fine until I go to stop. The only Rom I can get it to work is the my touch 3g port.
Click to expand...
Click to collapse
I've been having the same problem. It works just fine until I want to stop using it then it locks my phone, doesnt reboot though. It will sit there locked for 30 minutes if I let it, I have to pull the battery and reboot
There was a market update this morning though, haven't tried it yet with the new version.
Kcarpenter said:
Sounds like you have bigger problems if the only rom you can get to work is the mytouch port.
When you flash a rom, go into the Wipe menu and wipe everything except battery stats.
If it still doesn't boot repartion the SDcard to Fat ONLY.
If it still doesn't boot, you have some issues somewhere.
I took care of a lot of stupid issues I was having by running the 2.1 RUU and re-rooting and flashing the rom again.
Click to expand...
Click to collapse
I don't think he meant the mt3g is the only rom he can get to work. I think he meant mt3g is the only rom that wireless tether works properly on..
Libinjo said:
Hello I am having an issue with wireless tether 1.6. On any of the sprint 2.1 roms I try it freezes my phone and reboots when I stop tethering. Was wondering if there was a fix I didn't see when I looked around. It works fine until I go to stop. The only Rom I can get it to work is the my touch 3g port.
Click to expand...
Click to collapse
Are you running kernel .29?
I'll go even futher...are these kernels SDX kernals?
Edit: And even though it does freeze my phone if i stop it...its still a tether. and i love my phone being over clocked. so if i have to restart my phone instead of stopping the tether, its a small price to pay!
I am running the toast oc kernel. And yes I meant the tether only works on the mt3g. I ran the oc kernel on the 2.1 roms also that's actually when it started. I went from the oc mt3g Rom to aloysius 2.1 oc version and it quit working. So now I'm back on the oc mt3g Rom .
Libinjo said:
I am running the toast oc kernel. And yes I meant the tether only works on the mt3g. I ran the oc kernel on the 2.1 roms also that's actually when it started. I went from the oc mt3g Rom to aloysius 2.1 oc version and it quit working. So now I'm back on the oc mt3g Rom .
Click to expand...
Click to collapse
Well i think most ROMS run the .29 kernal while mt3g runs the .65 kernal. Sounds like its the .29 kernal.
http://code.google.com/p/android-wifi-tether/downloads/detail?name=wireless_tether_2_0_2.apk&can=2&q=
Try this one it works like a charm xP.
and of course make sure your rooted
Edit:
Ive had problems in the past with wireless tether for root. this one works like advertised and works wonders no hot phone either
Ok Tyvm ill have to recover and install it then see if it works. And the kernel says .29 on the mt3g Rom so its the same one on both.
What I usually did to solve this was close the app with a task killer and it was ok with me. It's a known issue. However the problem I'm experiencing now is that If I want to change the SSID Name or any setting in the WI-FI app it takes me to a black screen labeled SU Permission? Suggestions anyone? oh and btw no one can see my her0 =/ help!
It works fine for me. I've used it several times and never had it lock up on me when I tried to stop it. I'm running the newest Damage Control 2.09.01 and android-wifi-tether 1.6.
subcypher said:
It works fine for me. I've used it several times and never had it lock up on me when I tried to stop it. I'm running the newest Damage Control 2.09.01 and android-wifi-tether 1.6.
Click to expand...
Click to collapse
I've always had trouble with 1.6 seems to work great for some people i linked the one for 2.0.2 same version for the evo and it works great even had a battery temperature shown in the program
Well the 2.02 doesn't work either. It freezes as soon as I give it root access.
Well i think most ROMS run the .29 kernal while mt3g runs the .65 kernal. Sounds like its the .29 kernal.
Click to expand...
Click to collapse
Actually, the my touch rom uses .29 kernel, but version 65, the others are like version 83 or something. Only basic difference is no bfs or comp cache
-------------------------------------
Sent via the XDA Tapatalk App
I'm having an issue that hasn't happened before. My data used to be working fine on Serendipity but now, even after flashing to the new 5.3, my 3G network isn't working at all for data. I can't browse the web, get e-mail, etc.
When I flashed back to stock rom, the data worked fine, as soon as I flashed to 5.3 the data was inoperable again - and this was a fresh install meaning I did a MASTER CLEAR and did NOT restore my backup from Titanium yet.
I figured that it might just be the ROM so I flashed back to stock, checked that data worked (it did) and flashed Phoenix 4.5. Same problem. Fresh install, data isn't working.
I checked the APN and all the APN settings are the exact same from stock (I wrote them down). I tried disabling 3G and using GSM (Edge) and data worked fine, but when I placed it in automatic again, data stopped working.
I tried switching bands from 850 and 1900. I don't have 850 here but that never been an issue as I have always used 1900. I tried installing the JL3 modem, still data isn't working.
Now, I'm totally lost. Please, does anyone have ANY suggestions?
Did you check your bill to see if you still have the plan?
carboncopy01 said:
Did you check your bill to see if you still have the plan?
Click to expand...
Click to collapse
Yes, of course I still have the plan. If data worked fine in stock ROM why wouldn't I have the plan?
This is the wrong place for this post, mods please move!!!
Most likely you need to check your APN settings.
bbtheory said:
This is the wrong place for this post, mods please move!!!
Most likely you need to check your APN settings.
Click to expand...
Click to collapse
I double checked my APN settings and they are correct, they're the exact same from stock.
charmartist said:
I double checked my APN settings and they are correct, they're the exact same from stock.
Click to expand...
Click to collapse
Get a new sim card. Its free
Sent from recent
ninjuh said:
Get a new sim card. Its free
Sent from recent
Click to expand...
Click to collapse
I don't think that's the problem though. If data worked fine in stock but not in a custom ROM then it can't be the SIM card.
hmm
Try a few modems as well
did you try other roms?
ronii1123 said:
Try a few modems as well
Click to expand...
Click to collapse
I tried the JL3, which other modems are compatible with Phoenix 4.5?
shawn122 said:
did you try other roms?
Click to expand...
Click to collapse
I only tried Serendipity 5.3 and Phoenix 4.5. I'm thinking of trying Perception or Cognition next to see if the problem still persists.
I had/have a similar issue and think it is a modem issue. Using Perception I had no 3g issues. But when I tried Darky's rom it would stay um EDGE. If I forced WCDMA only it would work (or have no service). I can't be certain but the best modem for you depends on region.
Sent from my GT-I9000 using XDA App
charmartist said:
I tried the JL3, which other modems are compatible with Phoenix 4.5?
I only tried Serendipity 5.3 and Phoenix 4.5. I'm thinking of trying Perception or Cognition next to see if the problem still persists.
Click to expand...
Click to collapse
This sounds like an APN/modem issue. Why dont you ask in the Serendipity thread? Im sure people which are using it and Mike will be able to help you
I solved my problem when I installed Cognition 3.04. I'm not sure but isn't Cognition based on a Captivate Rom and uses a Captivate modem?
It might not have been ROM specific but kernel specific. You can load custom ones or use the one each rom is built with. Though I might be way off here.
Sent from my SAMSUNG-SGH-I897 using XDA App
charmartist said:
I solved my problem when I installed Cognition 3.04. I'm not sure but isn't Cognition based on a Captivate Rom and uses a Captivate modem?
Click to expand...
Click to collapse
Try some other i9000 roms like Andromeda, Continuum and di11is5.3 roms.
Here is a list of i9000 and i897 modems http://forum.xda-developers.com/showthread.php?t=876391
(EDIT = they are all i9000 modems actually with one i9088 modem from Chinese Captivate)
The most puzzling thing is that I never had a problem like this before. It just kind of happened, as if AT&T changed something over at the region where I live. Because if it worked with the stock rom and after a master clear still doesn't work with the customs roms... it just seems a bit odd; especially since it worked before.
Did you ever check to see what it says in Settings => About Phone => Status for Mobile Network Type?
Hey guys I recently had someone flash gingerbread the the v21a ROM and it went through and everything works except my ability to receive phone calls. Has any one else in hear experience this or anything similar?
Also it seams that my data signal is not as strong anymore. I basically am always in 3g and hardly ever in 4g when there is 4g every were I live. Any tips or suggestions would be great............. OH Yeah and I also set up the new APN settings but I feel like I might be missing someting.
Try 20C,but it's not rootable.
Otherwise,roll back to froyo.
arsen4oo said:
Try 20C,but it's not rootable.
Otherwise,roll back to froyo.
Click to expand...
Click to collapse
Wish we could, there doesn't seem to be an ATT version of Froyo anywhere.
It's here somewhere...One of the threads about going back to froyo has it (zip file with the bin and fls files. I downloaded it awhile back so I don't remember which one it was. But a search should find it.
https://rapidshare.com/#!download|2...391931|R~8193971AC5B3613D32ECF33EA9EC4787|0|0
Damn arsenal, thanks a bunch. I went searching for a Site that would let me share v20c but they were limited to 200mb. I'll try rapidshare when I get to my office.
if the signal is good try to put it in english lang. and see if it works>>try wipe cach and factory rest in loder(vol down +3d+pwer)
fishguy253 said:
Hey guys I recently had someone flash gingerbread the the v21a ROM and it went through and everything works except my ability to receive phone calls. Has any one else in hear experience this or anything similar?
Also it seams that my data signal is not as strong anymore. I basically am always in 3g and hardly ever in 4g when there is 4g every were I live. Any tips or suggestions would be great............. OH Yeah and I also set up the new APN settings but I feel like I might be missing someting.
Click to expand...
Click to collapse
Try my torrent file on extratorrent..... Just search for dwaynedman or search for
LG P925 software, I compiled the torrent with all of the software necessary to
flash KDZ files and includes the V20C KDZ file. It is rather large though because of all the other software and drivers. 1.8GB file size ......
Yes, V20C is rootable, look for the megatron exploit, it works fine !
If anyone thinks i should make a new torrent with just the V20C and root program, let me know.... or just reply saying make torrent.
thanks
dman
Torrent file for V20C KDZ and Megatron Root exploit !
Here is the torrent link that I made, Please pass it on !
http://extratorrent.com/torrent/2633977/
Contains Rogers Canada baseband and rom V20C
Megatron root exploit
Newest LG mobile drivers
Instructions
Thank You and Please Seed after downloading
Dman
I have tried for days to get ICS working on my phone. I am using the Chinese radio and everything is working fine on GB.
When I update to ICS it says baseband unknown
Updating the Build prop from default 4 to 3 does nothing.
On Gummy it just stalls and won't boot up.
Using the zips for GSM fix and RWAILY's Modified build in safestrap aborts the Installation. Updating the xt883 radio aborts installation
Why is my phone being such a douchebag.
Try using rick#2's xt860 patch
Sent from my XT860 running ICS using xda premium
http://forum.xda-developers.com/showthread.php?t=1560519 here you can find the build prop for ICS just replace it with root explorer and you should be good.
Sent from my XT862 using XDA
Thanks but they still don't work.
The GSM fix will not flash in safestrap. When I take the build prop and replace it manually, the splash screen hangs
Anytime the build prop is tweaked, I run into problems in ICS. GB is fine though.
phonephoenix said:
Thanks but they still don't work.
The GSM fix will not flash in safestrap. When I take the build prop and replace it manually, the splash screen hangs
Anytime the build prop is tweaked, I run into problems in ICS. GB is fine though.
Click to expand...
Click to collapse
hi
try to make a comparison between a stock GB build.prop vs the modified one for chinesse.
with that info update manually the build prop in ics.
because if you simply put the GB buildprop on ICS ICS will die
if that works can you post which changes you noted
I'm experiencing the same thing. But in my case I also get baseband unknown is GB (verizon gb without radio). Still looking for solution
Sent from my SGH-T839 using XDA
This should work for AOKP at least. It did for me.
nikeusfr said:
For gsm user, this is solution and all works well :
install safestrap
format data, cache and system
install aokp and gapps
reboot without sim card in the phone
edit build.prop with rootexplorer or other :
# Default network type.
# 7 => Global Phone (4 => CDMA).
ro.telephony.default_network=3 (instead of 7 or 4)
# BEGIN Moto,IKDROIDPRO-430, a17673
# Feature33857 on DroidWE, support DualMode switch, UMTS/CDMA
ro.mot.FTR.33857=false (instead of true)
# END IKDROIDPRO-430
# BEGIN Moto, IKSTABLETWO-1284, nfjb73
# without this property, the lock screen would take global phone as UMTS
# block user to operate before setup
keyguard.no_require_sim =false (instead of true)
# End Moto
save build.prop after this change
new step, enter *#*#4636#*#* into the dialer. Then goto "Phone Information". Near the bottom of that screen there's a drop down of network preference. For GSM-ONLY use GSM (PRL). Exit that screen and reboot the phone.
shut off phone, insert your sim card and boot the phone.....
thanks to hashcode and all over.
Click to expand...
Click to collapse
I've done everything. I still get the same results.
When i enter *#*#4636#*#*
I go into phone information
I try to change it from unknown to GSM and it won't do it.
Phone is a big D Bag.
EDIT: Thank you for trying though.
Can you recommend any GB roms? I had Mav and it was pretty good
I use this exact build.prop with my droid 3 on tmobile and ics
http://forum.xda-developers.com/showpost.php?p=23884104&postcount=1368
Hope it helps
SithDagger said:
I use this exact build.prop with my droid 3 on tmobile and ics
http://forum.xda-developers.com/showpost.php?p=23884104&postcount=1368
Hope it helps
Click to expand...
Click to collapse
But can you tell me if you have data connection with T-Mobile?
I am using Mavrom 3.5 and my provider is AT&T. 3G DATA is working so nice and i like this rom but i am thinking to move to ICS.
But if DATA connection is not working with GSM providers, i will stick with Maverick rom.
koukobin said:
But can you tell me if you have data connection with T-Mobile?
I am using Mavrom 3.5 and my provider is AT&T. 3G DATA is working so nice and i like this rom but i am thinking to move to ICS.
But if DATA connection is not working with GSM providers, i will stick with Maverick rom.
Click to expand...
Click to collapse
Yes, fully working 2g data connection with tmobile, wouldnt have ics on my phone without it. 3g would only work with at&t though, since the droid3's hardware doesnt support tmobiles 3g band.
Also, dunno if this helps, but i dont use *#*#4636#*#* to setup, i go into the mobile network settings, and scan for a network operator, connects just fine.
SithDagger said:
Yes, fully working 2g data connection with tmobile, wouldnt have ics on my phone without it. 3g would only work with at&t though, since the droid3's hardware doesnt support tmobiles 3g band.
Also, dunno if this helps, but i dont use *#*#4636#*#* to setup, i go into the mobile network settings, and scan for a network operator, connects just fine.
Click to expand...
Click to collapse
Thanks sounds very nice. Can you also please tell me if you are using CM9 ICS or AOKP ICS?
koukobin said:
Thanks sounds very nice. Can you also please tell me if you are using CM9 ICS or AOKP ICS?
Click to expand...
Click to collapse
CM9, havent tried AOKP yet, need to try it sometime.
SithDagger said:
I use this exact build.prop with my droid 3 on tmobile and ics
http://forum.xda-developers.com/showpost.php?p=23884104&postcount=1368
Hope it helps
Click to expand...
Click to collapse
Hash should add that **** onto his post. I'm seeing a ton of requests for this very thing.
I think your problem is not with the build.prop. Its with the radio that you have before flashing. In my case i have the stock verizon rom with the chinese radio and when i flash to ICS i have the same problem. No signal, unkown imei, etc.
You have to flash the original verizon radio(XT862) and then flash to ICS.
Look at this post:
http://forum.xda-developers.com/showthread.php?t=1544125
Tell me if you fix your problem
chemicalboyxda said:
I think your problem is not with the build.prop. Its with the radio that you have before flashing. In my case i have the stock verizon rom with the chinese radio and when i flash to ICS i have the same problem. No signal, unkown imei, etc.
You have to flash the original verizon radio(XT862) and then flash to ICS.
Look at this post:
http://forum.xda-developers.com/showthread.php?t=1544125
Tell me if you fix your problem
Click to expand...
Click to collapse
But cm9 doesn't touch the radio... I flashed cm9 from stock when I had the chinese radio installed on stock, so I dunno, no problems here.
Of course after I flashed I went to settings, wireless and networks, more, mobile networks, and then network operators, then I selected tmobile, problem solved. This was after modifying the build.prop, and flashing cm9.
I see no reason to flash the stock radio when the chinese is needed for tmobile/at&t, and cm9 doesn't touch it.
sent from Sheogorath with cheese!
SithDagger said:
But cm9 doesn't touch the radio... I flashed cm9 from stock when I had the chinese radio installed on stock, so I dunno, no problems here.
Of course after I flashed I went to settings, wireless and networks, more, mobile networks, and then network operators, then I selected tmobile, problem solved. This was after modifying the build.prop, and flashing cm9.
I see no reason to flash the stock radio when the chinese is needed for tmobile/at&t, and cm9 doesn't touch it.
sent from Sheogorath with cheese!
Click to expand...
Click to collapse
In my case if i flash to CM9 from stock+chinese radio i have the problems that i mention(unkown imei, baseband, no signal, etc). If i flash to CM9 from stock+stock radio that problems dissapear.
I bought a used Droid 3 XT862 which was running 5.7.905 firmware and i went back to 5.6.890 (Kernel and bootloader remained intact as expected). Then i rooted the phone and flashed the chinese radio. I installed CM9 and then i used the buid.prop from this link:
http://forum.xda-developers.com/showpost.php?p=23884104&postcount=1368
I couldn't flash this zip file through safestrap (at least no go for my occasion) so pushed it to /system by using root explorer.
I rebooted the phone and i had 3G data connection working just fine. My provider is AT&T.
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.