Hi all!,
I'm new on these forums , it was 3 months since I've bought my Galaxy tab 8.9 GT-7310, today I tried to run the tab but when I'm trying run it, I can just see the logo that appears at the beginning (Samsung Galaxy tab 8.9) and the tab just remain in this position !!!!
please how can I fix this problem , and sorry for my bad English
Zack F said:
Hi all!,
I'm new on these forums , it was 3 months since I've bought my Galaxy tab 8.9 GT-7310, today I tried to run the tab but when I'm trying run it, I can just see the logo that appears at the beginning (Samsung Galaxy tab 8.9) and the tab just remain in this position !!!!
please how can I fix this problem , and sorry for my bad English
Click to expand...
Click to collapse
That's known as a bootloop. ODIN is your friend in this case. Go here and read about ODIN and its How-to use it. Your SDcard contents are safe, as is your tablet. You only need to find a suitable ODIN image for your tablet right here, be sure to look for the 7310 section, not the 7300.
nirogu325 said:
That's known as a bootloop. ODIN is your friend in this case. Go here and read about ODIN and its How-to use it. Your SDcard contents are safe, as is your tablet. You only need to find a suitable ODIN image for your tablet right here, be sure to look for the 7310 section, not the 7300.
Click to expand...
Click to collapse
That or if you have a custom recovery you can wipe and reflash a stable rom
Sent from my Incredible 2 using xda premium
nirogu325 said:
That's known as a bootloop. ODIN is your friend in this case. Go here and read about ODIN and its How-to use it. Your SDcard contents are safe, as is your tablet. You only need to find a suitable ODIN image for your tablet right here, be sure to look for the 7310 section, not the 7300.
Click to expand...
Click to collapse
thank you so much, now, my tab is working good
use odin3,update your tab to offical rom
重新刷吧
Related
I Recently buyed me an galaxy tab, and i rooted it with z4root and i removed stock home launcher from the rom, and now i decide to make a factory reset.
I rebooted the tab and then after boot i cant do anything ! I dont have any launcher! How do i fix this ?
Thnx: Modstar
Start by posting in the right section : General
First off, wrong forum, should be in general.
Find Rotos thread and follow the instructions carefully.
Sent from my mind. Or a Galaxy Tab
Yes, wrong forum, but just to get you in the right direction:
http://forum.xda-developers.com/showthread.php?t=894763 Is the pre-rooted firmware from rotohammer, you will need this.
Secondly: I recommend the Overcome kernel and rom for your tab, as it's very stable and pretty much just a great rom. You can find it here. http://forum.xda-developers.com/showthread.php?t=894763
In the second thread, go down to the section "IF your Tab does not boot after flashing the kernel and hangs at the Samsung Galaxy Tab screen, you must follow the following procedure" section of the original post and follow the direction exactly as stated.
Okey sorry about that i posted it in wrong section.
Thnx for the answers but i want it to be as if i buyed it from the store.
Than you will have to find the stock rom that came with your device... and depending on the exact model that could vary.
btyork said:
Than you will have to find the stock rom that came with your device... and depending on the exact model that could vary.
Click to expand...
Click to collapse
Got it but need some help to find it
PDA:JJ7 / PHONE:JK5 / CSC:JK2 (TPH)
I'm fairly new to the galaxy tab and i'm unsure how to change the rom to cm7 my galaxy tab is a bell one P1000M its un rooted its stock for now so where do i start?
Root with Z4root but don't attempt to get CM7. Its a beta and you need to know how to use Heimdall to flash it.
Sent from inside a whale.
any guide i should look at for using it?
kuipou said:
any guide i should look at for using it?
Click to expand...
Click to collapse
Yes there is plenty of guides.
All roms come with introductions on how to install aswell as guides in teh sticky topics of teh forums.
Before you attempt to do anything to your device sit down and do some research otherwise you will be back here creating a "help I bricked my device urgent help" topic clone of the million others here.
kuipou said:
I'm fairly new to the galaxy tab and i'm unsure how to change the rom to cm7 my galaxy tab is a bell one P1000M its un rooted its stock for now so where do i start?
Click to expand...
Click to collapse
You could read the OP in the CM7 development thread. Especially the part about how incomplete & unstable it is.
Either leave it alone, or flash Overcome instead for now, CM7 is several weeks away from being any use as a daily system.
I have been following the CM7 threads, seems like there is still some work to do to get it working on the tab.
I flashed overcome 1.4.4 and its very very nice. fast and smooth.
Hi Guys,
I have recently update my galaxy note to icecream sandwich 2 week ago.it was working fine till yesterday.Yesterday night i didnt kept my mobile for charge and it was fully discharge.When i wake up in the morning and i kept for the charge.When i start my gnote it just hangup in the SAMSUNG LOGO....I kept it for 2 hour then also its the same. What to do ????????????????????????? Please help ??????????????????
Flash a stock rom via odin. Or boot into recovery and flash your current rom again.
Try the second method first¦
Sorry to say, but this is NOT the Q&A section, this is a development related section of the forum, would you mind posting that question where it belongs to ?
This should be in Q & A...that being said...This is callwd BOOTLOOP.....
Happens when you dont flash properly...download LP3 rom from stock roms thread...and download pc odin....get your phone to download mode..vol up + lock + menu....preas vol up again...connect it to pc...open pc odin before or after this..no prob..click on PDA and select the LP3 rom file...hit start and see the magic happen...if it wont work.got to recovery and do all 3 wipes...try this again...good luck
You may try removing the battery and re-insert. and charge the phone when it is off for some time say an hour and reboot. this may not be the solution but who knows where the remedy lies.
hey guys i think i have the same problem except mine was after i wiped my phone wrongly i think, so i managed to load a GB firmware onto my phone but should i still use the LP3 rom with the phone or should i flash a kernel? thanks
Chinese GALAXY note 2 was stuck on the logo please help
I'm a Chinese Note 2 Page loaded you are stuck rooted android phone font you've installed the software, reset the Why
Windows 8. Backup did. Above Let me go, but I can not hold on to power the factory settings Brhltfa can help me to learn my phone Bnvnm
patch12 said:
I'm a Chinese Note 2 Page loaded you are stuck rooted android phone font you've installed the software, reset the Why
Windows 8. Backup did. Above Let me go, but I can not hold on to power the factory settings Brhltfa can help me to learn my phone Bnvnm
Click to expand...
Click to collapse
Sorry mate, think your translator is up the creek...
Sent from my GT-N7000 using xda premium
lolgical said:
hey guys i think i have the same problem except mine was after i wiped my phone wrongly i think, so i managed to load a GB firmware onto my phone but should i still use the LP3 rom with the phone or should i flash a kernel? thanks
Click to expand...
Click to collapse
From gb you can flash whatever you like as it's a safe kernel. Once you're on ics or jb, flash a Philz kernel to be safe.
Sent from my GT-N7000 using xda premium
Chinese GALAXY note 2 was stuck on the logo please help
Which now I need you to go to the forums to solve this problem interlock device after you load the page
galaxy note 2 Chinese
kernel ver:3.0.13
android ver:4.1.2
sw:s0005-ssd-hh-l002
cuatom build verno. 0088130115
mt6515
Please link to the supposed problem
patch12 said:
Which now I need you to go to the forums to solve this problem interlock device after you load the page
galaxy note 2 Chinese
kernel ver:3.0.13
android ver:4.1.2
sw:s0005-ssd-hh-l002
cuatom build verno. 0088130115
mt6515
Please link to the supposed problem
Click to expand...
Click to collapse
Wrong forum, you need note 2 forum
Sent from my GT-N7000 using xda premium
patch12 said:
Which now I need you to go to the forums to solve this problem interlock device after you load the page
galaxy note 2 Chinese
kernel ver:3.0.13
android ver:4.1.2
sw:s0005-ssd-hh-l002
cuatom build verno. 0088130115
mt6515
Please link to the supposed problem
Click to expand...
Click to collapse
If you have a Note 2 please go to the forum for this device. And try to write in very short english sentences - then we'll have a chance to understand what you write.
ThaiDai said:
If you have a Note 2 please go to the forum for this device. And try to write in very short english sentences - then we'll have a chance to understand what you write.
Click to expand...
Click to collapse
ok.plz help me I find ROM thank you
I installed the software ifont later rest will be stuck on the logo
need room plz
patch12 said:
ok.plz help me I find ROM thank you
I installed the software ifont later rest will be stuck on the logo
Click to expand...
Click to collapse
No one could help
patch12 said:
No one could help
Click to expand...
Click to collapse
As said above, you need the note 2 forum, this is note 1, we can't help.
Sent from my C6833 using XDA Premium 4 mobile app
Helo I recently got a Galaxy ace, while I thought It would be the s5830 model I got the s5839i.
I know the roms seem to be compatible (even though there isn't much information about that), but I was wondering if the clockworkmod5830i zip file is too, so I can install roms without big worries (i'm posting this because if I tried it and bricked the phone... there wouldn't be any way to go back since there are no 5839i odin files out there or anything)
S5839i is S5830i.
S5839i or S5830i is not S5830!!
Neo-Mike said:
S5839i is S5830i.
S5839i or S5830i is not S5830!!
Click to expand...
Click to collapse
"is"?
Why the different model number then?
ZakooZ said:
Helo I recently got a Galaxy ace, while I thought It would be the s5830 model I got the s5839i.
I know the roms seem to be compatible (even though there isn't much information about that), but I was wondering if the clockworkmod5830i zip file is too, so I can install roms without big worries (i'm posting this because if I tried it and bricked the phone... there wouldn't be any way to go back since there are no 5839i odin files out there or anything)
Click to expand...
Click to collapse
Hey mate,
I'm new to all this too and have recently bought a s5839i (2 weeks ago), I aslo bricked my phone after 2 days as I found information on the s5839i sparce and I didnt take the time to reseach up as I should have done.
Ive since found out that Odin v1.83 works with our devices and I reloaded with a stock polish rom from sammobile and everything was fine again I couldnt get the clockworkmod to fully work on the rom, you could install it but when I went into recovery mode after a reboot it would just go back to the android version rather that the ClockworkMod.
I then tried the Retribution_beta3.5 and it works fantastic, looks so much better than stock and I also now have the flash player working which was my aim from the get go. I am now able to run ClockworkMod v5.0.2.6 and back up my device.
The only thing that worries me now is in "about phone" my model number now shows up as GT-S5830i rather than GT-S5839i, sure it make no difference like.
Hope this helps you, Im just reading as many threads as I can now to find out more info, I want to get the sky go app to work.
ZakooZ said:
Helo I recently got a Galaxy ace, while I thought It would be the s5830 model I got the s5839i.
I know the roms seem to be compatible (even though there isn't much information about that), but I was wondering if the clockworkmod5830i zip file is too, so I can install roms without big worries (i'm posting this because if I tried it and bricked the phone... there wouldn't be any way to go back since there are no 5839i odin files out there or anything)
Click to expand...
Click to collapse
Checkout this thread to flash latest stock roms (from sammobile) using Odin: http://forum.xda-developers.com/showthread.php?t=1822109
Also go to this thread http://forum.xda-developers.com/showthread.php?t=1551156 for more detail about important stuff
Hope this helps
Only1wilber said:
The only thing that worries me now is in "about phone" my model number now shows up as GT-S5830i rather than GT-S5839i, sure it make no difference like.
Click to expand...
Click to collapse
Hello,
From this it follows that we can flashing our s5839i using s5830i rom?
I can't find polish clean (unbranded) rom for s5839i, because I have a lot of problems with my T-mobile rom. (S5839iBOLC5). And also I can't flash CWM recovery for it. Only root works fine.
I found S5839IXXLD2 and S5839IBULI1 but whether is there polish language?
How can I checked it?
ZakooZ said:
"is"?
Why the different model number then?
Click to expand...
Click to collapse
Because they are for different countrys
Tapatalk signature:
Sent from my banana with xda premium
So, can I flash using s5830i ROM?
DonMate said:
So, can I flash using s5830i ROM?
Click to expand...
Click to collapse
YES,WE CAN!
-Obama
Tapatalk signature:
Sent from my banana with xda premium
Hi peeps, its the end of the year 2013. And my previously owned galaxy ace is dying out of slowness, incapability and lagginess.
I've now got the new Galaxy ace 3.
Just rooted it with vroot and installed SuperSU.
Though im yet to find any proper CWM that is capable with this phone.
The usual methods that uses Odin and flashing the PDA doesn't work for me.
Any help is appreciated
PS, XDA doesnt recognize Galaxy Ace 3 yet and please do let me know if i've posted in the wrong place.
Sharing is caring, respect is all the wealth we need.
I got the Ace III about a day after you and have already managed to brick it :crying:
So if you make any progress with CWM or Odin etc please post back.
It's such a good little phone I'd hate to give up on it.
Thanks
Tre91 said:
Hi peeps, its the end of the year 2013. And my previously owned galaxy ace is dying out of slowness, incapability and lagginess.
I've now got the new Galaxy ace 3.
Just rooted it with vroot and installed SuperSU.
Though im yet to find any proper CWM that is capable with this phone.
The usual methods that uses Odin and flashing the PDA doesn't work for me.
Any help is appreciated
PS, XDA doesnt recognize Galaxy Ace 3 yet and please do let me know if i've posted in the wrong place.
Sharing is caring, respect is all the wealth we need.
Click to expand...
Click to collapse
You will probably not find any help here because this is not Ace 3 forum.
BRKsays said:
You will probably not find any help here because this is not Ace 3 forum.
Click to expand...
Click to collapse
IS there an Ace 3 forum? 'cos I couldn't find one.
ps. fixed my phone just in case helpful advice might have been forthcoming.
dsten said:
IS there an Ace 3 forum? 'cos I couldn't find one.
ps. fixed my phone just in case helpful advice might have been forthcoming.
Click to expand...
Click to collapse
not yet, I'm afraid. maybe some developer with ace 3 would be able to help you out. sorry.
BRKsays said:
not yet, I'm afraid. maybe some developer with ace 3 would be able to help you out. sorry.
Click to expand...
Click to collapse
OK, thanks. In case any Ace 3 ace is reading, any assistance editing the vold.fstab would be appreciated. The format is different from what I was expecting.
-BRK- said:
You will probably not find any help here because this is not Ace 3 forum.
Click to expand...
Click to collapse
Try this recovery
http://www.mediafire.com/download/zr55lu9n76ivque/nontouch.tar
The Iron Man said:
Try this recovery
http://www.mediafire.com/download/zr55lu9n76ivque/nontouch.tar
Click to expand...
Click to collapse
Looks like the same one from here: http://forum.xda-developers.com/showthread.php?t=2548856
I've been holding that one in reserve since my phone model appears to suggest it will not be compatible - and I'm in the "Twice shy" phase of my meddling
Thanks for that though. I'm also investigating obackup (http://forum.xda-developers.com/showthread.php?t=2040507&page=478) as an alternative to CWM, no luck there yet either. I'm in an unfamiliar position of having a fairly new device
EDIT - Just occurred to me that message was probably for the OP, still - thanks.
dsten said:
Looks like the same one from here: http://forum.xda-developers.com/showthread.php?t=2548856
I've been holding that one in reserve since my phone model appears to suggest it will not be compatible - and I'm in the "Twice shy" phase of my meddling
Thanks for that though. I'm also investigating obackup (http://forum.xda-developers.com/showthread.php?t=2040507&page=478) as an alternative to CWM, no luck there yet either. I'm in an unfamiliar position of having a fairly new device
EDIT - Just occurred to me that message was probably for the OP, still - thanks.
Click to expand...
Click to collapse
You can thank me by pressing the thanks button
Hmmm I'll try to find a suitable recovery for your device. Can you mention its model
The Iron Man said:
You can thank me by pressing the thanks button
Hmmm I'll try to find a suitable recovery for your device. Can you mention its model
Click to expand...
Click to collapse
Samsung Galaxy Ace 3, GT-S7275T. Running Android 4.2.2 Baseband version: S7275TDVUAMK1
cheers